Soft button STOP not working in alarm mode ver 50 ...

I have recently update my Nokia 5800 firmware to ver 50 and found the soft button STOP not working during alarm. This was oK in ver 21.
Anyone has any idea how to correct this issue ?
Chris
Solved!
Go to Solution.

Have u noticed that there aren't buttons but actually moving arrows? U will have to slide you finger across the screen in the moving direction.

Similar Messages

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

All iPad buttons are not working even after resetting it (hard, soft and via iTunes).

All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes.
The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."

I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

Sharepoint send to button not working with document mode 9

Hi All,
We are using document mode 9 for HTML 5 in the master page but the SharePoint send to button is not working with ie 9.
Can anyone help me to resolve this issue.

SharePoint 2010 doesn't use HTML 5, so its possible that the browser is running in quirks mode. Try the default compatibility mode and see if that works for you.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

HELP - Edge Animate issues - buttons/symbols not working/disappearing in portrait mode on mobile devices

Edge Animate - Issues - buttons/symbols not working/disappearing when in portrait mode on iPad and mobile devices, but in landscape version everything is fine.
Everything works cross broswer on Desktop - Safari, Chrome, Explorer and Firefox - mobile devices prove glichy... anyone else experience this?
It's a regular issue of mine, particularly with complex animations. Symbols disappear
- is it something to do with overflow?
- responsive scaling?
I have no idea.

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

HT4528 Buttons / Apps not working.. can't turn off

I have iphone 4. My soft button stopped working about a week ago.. so i enabled the icon that allows you to use the home button from the screen. Now my top hard button wont work. My phone will not turn off.. either buttons work and my apps wont open.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

White screen appear and my home button does not work

My ipod home button is not working
I went online reading for what happens when white screen appears
I tried it and i realize it might not work because my home button stop working
should i go to an ishop or will i be able to fix it?
I hook up my ipod to the computer and its not reading it anymore...
(4th generation)

Try:
- iOS: Not responding or does not turn on
- Neglect the Restt. When it says place the iPod in recovery mode use one of these programs
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone4 freezes causing the battery to drain quickly, the buttons do not work while the phone is frozen. what can i do?

My phone has started to freeze, when I pull the menu bar down, when I am in apps, just any time. when it freezes, the buttons do not work. The battery dies within an hour of being off the charger. I do not know what to do, or why it has started to do this. please help.

Hello taylordoveriphone4,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning performance issues:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

My G4 powerbook starts up but with a black screen. The reset button does not work. Does anyone know the keys to press on restart please ?

My G4 powerbook running OSX 10.3.9 starts up with a black screen. The reset button is not working. Does anyone know which keys to press on restart please.?

Try holding the shift key while booting to get Safe mode if possible.
See links for more info.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455

Froze on black screen and power button does not work

my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
any suggestions would be appreciated

- iOS: Not responding or does not turn on
Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

With version 5 of Firefox, if I open more than 1 session, most of the time I cannot see anything in the navigation bar and my back and forward buttons do not work.

I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My iPhone will not work in landscape mode anymore, how do i get to work again

my iPhone will not work in landscape mode anymore, how do i get to work again??

Double click round home button then slide icon on the bottom of screen to so you go all the way to left. There you will see a square icon with a circle arrow . That is the screen rotation control button. Tap on that to lock/unlock screen rotatio

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

Start up in Safe Mode.
http://support.apple.com/kb/PH4373

Save button is not working for ONE CLICK ACTION

Hi All,
We have embeded a custom table view in a standard component.While we are editing the first row of the table view by ONE CLICK ACTION & pressing the SAVE button of overview page,then the record is saved in the database. But if we edit any row other than the 1st one,the save button is not working.
We have used transaction context here for simple object.
lv_tx_ctxt = lr_ent_bt->get_transaction( ).
my_tx_context->add_tx_context( lv_tx_ctxt ).
Please suggest how we can focus on the current line which we are editing & can save the record in database?
Thanks.

Hi Hakan,
Probabaly this is not my problem. I know that how bt one click we can get the desired row.
Let me briefly explain you my requirement and currently where I am stuck.
I have a assignment block ( custom) in the main overview page with a custom table view ( ie in the view we are displayng entries in the table view ) and the user can press edit button on any row and that will open the particular row in edit mode . User will change the value in any of the columns and press save button on the main component and the custom changes will be saved in the database.
Now the problem that we are facing is when we are chnaging the first row it si working but when we are doing chnages in the 2nd row or 3rd row changes are not saved ( not even in the table view that is getting displayed) .
*Let me briefly tell you the approach that we took . Since our table view uses a simple object ( which is not a related object with BTORDER so we need to explicitly save the simple object entities to transaction context and for doing that we have redefined the eh_onsave method in the overview page) .
*Now the save button is in overview page so to pass the entry from our custom table view to overview we are using custom controller . The custom controller 's collection wrapper only has the first entry of the table view custom_controller->collection_wrapper->get_next is failing which is the reason why the 2nd entry is not getting saved.
Can you tell me how i can get all the table entries in my custom controller's collection wrapper?
Let me know if you have any other questions.

Soft button STOP not working in alarm mode ver 50 ...

Similar Messages

Maybe you are looking for