Soft Proofing: may not work on my screen

First of all: Thanks so much for implementing soft proofing! Especially in such an easy way! I was really hoping you'd do it exactly like that.
Anyway, I've got a wide gamut monitor (Thinkpad W520 laptop screen). And I've got an image with a lot of strongly saturated reds (PowerShot S95, RAW).
Now, if I switch between Loup View and Develop View, I can see a huge difference in the reds because the Loup preview is sRGB (medium quality). I can also see the same difference when exporting to sRGB vs. exporting to AdobeRGB.
However, if I engage soft proofing and select sRGB, the image still looks the same. Only the little preview in the upper left changes to what I would expect.
That's not exactly what I would expect ^^
On the other hand, if I select a custom profile (AdoramaPix, lustre paper), the whole rig seems to work.
More information:
- Windows 7, 64 bit with 64 LR4 beta
- Whether relative or perceptual doesn't matter
- Only seems to affect sRGB
- The image shows very, very clear differences between sRGB and AdobeRGB on my monitor, so it's definitely not a visual problem on my end
- The histogram changes when switching between sRGB and AdobeRGB in soft proofing mode
- I really cannot see the slightest change in the image when switching
I hope you can find a fix or point out what I'm doing wrong because I would really like to use soft proofing for images published on the web, which is of course in sRGB.

I went on about this a little more scientific by creating an image with three rectangles: red, blue and green.
All of them are 100%, e.g. (255, 0, 0). Colorspace: ProPhoto RGB.
Results when exporting the images to AdobeRGB and sRGB, concentrating on the reds:
- sRGB looks very washed out
- AdobeRGB looks a bit washed out
- Original ProPhoto has so much red that it almost drives me nuts
Now, I would really expect similar results when activiating soft proofing.
But when selecting either AdobeRGB or sRGB, the reds always drive me nuts.
There is just no difference at all to the original ProPhoto image!
Conclusion 1: Dorin, you were right, previews are in AdobeRGB. What I saw in the reds was the difference between ProPhoto and AdobeRGB. Somehow my screen seems to have extreme reds (calibrated recently with an X-Rite ColorMunki Display).
Conclusion 2: Soft proofing with AdobeRGB and sRGB really DOES NOT WORK!

Similar Messages

To whom it may concern Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E 2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in goo

To whom it may concern
Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
I look forward to your reply and a resolution of this problem.
Thank you very much!!!

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

HT4865 Have tried to verify my icloud account, but its not working the Verifying screen is just scrolling round, but not doing anything

Have tried to verify my icloud account, but its not working, the Verifying screen has been scrolling for ages now, it seems stuck, but it wont let me do anything, please help

" I ordered the Snow Leopard software and tried installing it, but it stopped and said to clean the disk."
First off, your installation disc is in all likelihood faulty.
This has been a known issue in the past:
Faulty Snow Leopard install discs - Apple has no timeline on ...
http://store.apple.com/us/help/returns_refund#policy:
*You can return software, provided that it has not been installed on any computer. Software that contains a printed software license may not be returned if the seal or sticker on the software media packaging is broken.

Soft button STOP not working in alarm mode ver 50 ...

I have recently update my Nokia 5800 firmware to ver 50 and found the soft button STOP not working during alarm. This was oK in ver 21.
Anyone has any idea how to correct this issue ?
Chris
Solved!
Go to Solution.

Have u noticed that there aren't buttons but actually moving arrows? U will have to slide you finger across the screen in the moving direction.

My imac is not working well, the screen is flashing.I can´t open any program.there is a monsterflashing

my imac is not working well, the screen is flashing.I can´t open any program.there is a monsterflashing

Hello,
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

"Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".

Turned my Dell running windows 7 off 2 days ago. Turned on today. Launched ITunes and got message "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".
All my albums are there but won't play.
Deleted Itunes and reinstalled. Same as before.
Any ideas ??

Hey MrCurwen,
I was able to find an article that included the same error message you're experiencing:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
According to that article, if you see the error message "iTunes cannot run because it has detected a problem with your audio configuration," QuickTime may need to be reinstalled. Please follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
Cheers,
David

Cannot log in to Nationwide internet banking in Firefox. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

Question
Cannot log in to Nationwide internet banking. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

That issue can be caused by corrupted cookies.
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Since I downloaded the upgraded software, my charger that came with my phone says "this cable or accessory is not certified and may not work reliably with this iphone" It worked before but now it doesn't...I don't think I should have to buy a new one...

since I upgraded to the new operating system my charger no longer works...
It says"this cable or accessory is not certified and may not work reliably with this iPhone"

Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here.

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

HT1476 upgraded my IPOD 5 to iOS 7.0.2 and will not charge battery. when plugged in gives message "This cable or accessory is not certified and may not work reliably with this IPOD".

Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
Anyone else have this issue after they upgraded the iOS system?
Thanks,

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer.

Using a Windows 2012 RDS Environment, we have users connecting to a CPD website, and as part of the CPD they need to run a systems checker. When they run the systems checker they get the following error message: "Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer". All users are connecting to this environment with Windows CE Clients,I have checked the setting on Adobe Flash and they seem correct but as each user has its own profile on the RDS session, is there something that I should be setting for each user. I have added the website to the trusted sites and it has made no difference. Any ideas

It sounds like what's happening is that Flash Player can't write or read from the local shared objects in the user's redirected home directory because we disallow traversing junctions in the broker process. This behavior was disabled to address a vulnerability identified in some of John Forshaw's research into the IE broker last year.
You can enable this behavior by adding the following setting to mms.cfg:
EnableInsecureJunctionBehavior=1
That said, you can probably gather from the name of the flag that we don't really recommend this approach, and disable this attack surface by default. There's some risk that a network attacker could craft content that abuses fundamental issues with how Windows handles Junctions to write to arbitrary locations.
Unfortunately, there's not a simple or easy workaround that I'm aware of (but it's been ages since I've administered a Windows domain) for this kind of NAS/SAN-backed terminal server environment where Flash is not able to access \Users\<user>\AppData\Roaming\Macromedia\Flash Player\ without traversing a junction.

Soft KeyBoard is not working on ios 7 with Air sdk 3.8

Hi
In my app Soft KeyBoard is not working on ios 7 with Air sdk 3.8. Does any one know soluton for this ?

Hi,
There's no question that TextFields and TextAreas weren't working in our case, likely because we have a deep displaylist with a variety of object types. Presumably, AIR has changed how it looks through the displaylist for objects that need keyboard, and perhaps we have an object type somewhere in the hierarchy that AIR no longer recurses. It's definitely something that changed, though.
It's no picnic to put together a sample app, I can't afford that time when I have a solution. But the symptom was very clear, a textbox would open, and the cursor would just blink with no way of interacting with it.
I'm happy using StageText directly, because it's a more direct way to interact with the OS and gives more control.
It also solves a bug in AIR that I haven't reported yet, but is as follows. Rarely, when you move the container of a TextField of TextArea after it has been created, AIR will crash and freeze iOS devices. It doesn't happen on Android or desktop, but with a user-base of about 100,000 of our app, we've had it reported maybe 50 times. One of our dialogs sometimes needs to reposition the elements, which is done animated. During this, AIR will crash about 0.01% of the time. We tried only creating the TextArea, but not activating it or even having it visible, but even an invisible TextArea will crash, presumably because AIR moves the internal StageText overlay around as well, and this confuses iOS after a while during the animation.
By using StageText directly, I finally also have a way to get rid of this bug, because I simply don't activate StageText until the object has already been positioned. Prior to that, it isn't even an editable text field, it's a label like anything else. So I'm happy I did this solution.
Let's just leave this thread as a record if someone else has the same problem. I'm quite sure it's because of our very complicated display list, and AIR having changed how it scans the displaylist for objects that need keyboard.
Best,
Per

TS3003 Installed QuickTime7 from Snow Leopard installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly." Now what?

Installed QuickTime7 from Snow Leopard 10.6.8 installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly." Now what?

Download and install the latest QuickTime Player for Snow Leopard > http://support.apple.com/kb/DL923

Why does my phone keep popping up messages "This cable or accessory is not certified and may not work reliably with this iphone" when there is no cable connected?

Why does my phone keep popping up messages "This cable or accessory is not certified and may not work reliably with this iphone" when there is no cable connected? This has been happening since IOS7 was installed and has become worse with 7.1. I have reset the phone several times with no change.The phone charges properly & I have never used anything but an Apple Lightning cable.

I already cleaned the port with compressed air before submitting the problem. I since cleaned it with a toothpick and dug out some more lint. this seems to have just about fixed the problem since I have only had the error pop up 3 times since then and i was getting the error constantly before.

Soft Proofing: may not work on my screen

Similar Messages

Maybe you are looking for