Soft shadows around photos on a particular website appear as heavy black frames in Firefox 5.0 although they look like proper shadows in Firefox 4.0 and in other browsers. How can I get the shadows to display correctly??
The shadow effect on two sides of the photos on this site looked fine in Firefox 4.0. When I upgraded to 5.0, the heavy black "frames" appeared in place of the shadows. No change had been made to the website between the time I looked at it in 4.0 and 5.0 (I know because I know the builder of the site). Indeed, it was only about an hour between my two viewings. So I figure the odd appearance has to have something to do with 5.0. But what? Is this fixable? Or do I need to wait for 5.1?
That is either a bug in Firefox 5 or the script has a problem with Firefox 5.<br />
It works in all other Firefox versions like Firefox 3 and 4 and 6 (Aurora) and 7 (Nightly).
Similar Messages
-
How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..
You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
Hope this helps. -
Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV
You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André -
After updating to 10.6.3, I installed the 10.6.8 update just to start experiencing these font issues. HELP! How do I get the fonts to display correctly in my browsers especially (Chrome & Safari)
What I ended up having to do was open up the Font book & remove duplicates. I knew it was Arial that was causing the problem, so I deleted the duplicate of that font. Inadvertantly I deleted all the Arial regular font, so I had to reinstall one copy. That was the solution. Thanks!
-
Remember only the icloud email address, forget the password, birthdate, and verification questions. How can i get the icloud email back?
Go to https://getsupport.apple.com ; click 'See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Forgotten Apple ID security questions'.
-
hello i would like to stop using outlook (office 2011) and use instead "mail": how can i transfer the database?
Hello Sylviefrombuenosaires, here is a link from macworld that can solve your question. Try reading this.
http://www.macworld.com/article/158112/2011/02/export_outlook_ical.html
Carlos -
How can I get the client IP address correctly?
Hi,
I am having a problem with getting the client ip address correctly using jsp. I am currently using the method request.getRemoteAddr() (JSP)to get the remote client IP. This method works fine with intranet addresses.
However, when I am using a dial-up connection through a ISP (internet service provider), it could not detect the actual IP that is assigned to my client PC, but instead got another IP address.
Could anyone advise me on that? And could anyone advise me on how to obtain the correct client ip address correctly using any of the java technologies?
Thanks,
Damien>
I don't believe so. You can't establish aconnection
over the internet using a private IP. As far as I
know most, if not all routers, block them so itwon't
even move over the backbone.Well with port-mapping it is definately possible to
allow an external ip to "connect" to an internal ip, i
have done this very thing myself...Not the same.
You are addressing the external server with a public IP address. That is then translated into the internal connection.
That is not the same as using a private IP on the internet.
As I said, the backbone will not let a private IP through.
>
>
Yes, but my point is that at any given time, in the
world, many boxes might have one address. Even ifit
is a private IP is it still that IP for aparticular
box. So if you use java to get its IP that is theIP
that it gets. And that IP is useless for anything
unless that IP is meaningful for the othercomputer.
But all ips must be unique in a designated "internet"
be it an "intranet" or whatever, there cannot be a
situation where two identical ips in the same
"internet", such that an ip that is achieved from a
page-hit is valid and meangingful in order to send the
data it is requesting back to it, or find out more
about that computer, or log and report it if it is
doing something illegal; i don't think its that
meangingless is it?Yes it is. You can't use an IP to uniquely identify a box, and that is the sole criteria, when there might be two boxes with the same IP.
When you use java on a client box to get the IP of the box, it doesn't necessarily return an IP that it meaningful to the anyone outside the lan on which the box lives.
Because of this internet systems must do one of the following:
-Do not use the IP as an identifier.
-Require that the client has a public IP. This is often static. At least some security systems use this to validate users. -
My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?
Basics from the manual are restart, reset, restore.
Try those -
How can I get the scrubber software to correct a driver installation error?
I am currently on Windows 8.1. When I try to install the printer driver for my OfficeJet Pro L7650 I get the following error message: "System cannot find file specified".
I have read that there is a scrubber software that will solve this issue. How can I get this software?
This question was solved.
View Solution.You can get that HP program here.
Restart your computer.
Next run the HP Printer Install Wizard program found here.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
I have a 10.2.8 os on a G4 desktop. A week ago I clicked on the AOL icon in the bottom bar. I have not used AOL for six years. Two aol boxes came up. I can not get the boxes to go away for long. They may go away for 15 minutes and they come back while I am working. How can I get these aol boxes to go away?
I will be upgading to Tiger; 10.4.Right click on the AOL icon and select move to trash.
-
I uploaded a video from my iphone 5 into Aperture and then I tried to export it to my desktop. After I clicked on Export, it attempted to export for a while but then gave me an error message saying that 0 of 1 videos was exported and it couldn't export. Now it shows the video in the album in Aperture, but it won't play and I can't do anything with it. I have tried to recall the original but it says there is no original and it says there are no referenced files when I try to reference the files. The clip also shows an arrow pointing to the right with a yellow triangle by it. This is located in the bottom right of the image, right next to the video icon. My concern is that I tried to export the original. Any ideas on how I can fix this and get the video back?
The clip also shows an arrow pointing to the right with a yellow triangle by it. This is located in the bottom right of the image, right next to the video icon.
Is that the badge you are seeing? Then Aperture has lost the connection to the original video file.
Now it shows the video in the album in Aperture, but it won't play and I can't do anything with it. I have tried to recall the original but it says there is no original and it says there are no referenced files when I try to reference the files.
You tried to reconenct and locate the referenced file? Then you probably imported the video as "Managed" and then the commands for referenced files do not work.
Look directly into your Aperture library package, if the video is still there:
Select the Aperture Library in the Finder and ctrl-click(or right click) it.
Then select "Show Package Contents" from the pop-up.
In the Finder window that opens scroll down to the "Masters" folder and open its subfolder "2013" and then go to the month and day, when you imported your video. Do you see your video there, or any imports at all?
If you see the video in your library package, copy it to the Desktop, ad check, if you camn play it.
What do you see?
Regards
Léonie -
The PC keeps saying "Waiting for your Mac to Connect" and the Mac keeps saying "Looking for Computer" I have no clue what to do.
I suspect you didn't follow the Migration Assistant instructions. Please carefully look over:
http://support.apple.com/kb/HT4796?viewlocale=en_US
If you still cannot get it give AppleCare a call, the number is in your owner's manual. You have 90 days of free telephone support when you purchase a new Mac. They can assist on the OS X side but remember they may not speak MS Windows. -
I have been syncing songs from my wife's account. Now when I go to update apps it lists her apple id instead of mine to do the update. How do I get it back to my apple id? Thank you.
Were the apps downloaded from her ID or yours? If they were from hers, only her ID can be used to update them. If they were from yours, you can change the ID under Settings > Store > Apple ID > Sign Out, then sign in with yours.
-
How can I get the TOC to display ALWAYS in a Sans-Serif Font in Linux/Firefox.
I've created my help project in RH9. When it displays in Linux/Firefox, the fonts in the topics are fine, but the TOC displays in Times New Roman. Is there a setting in RH9 that I need to use to keep this from happening?
Hi,
Did you change the setting in the skin? What font have you set for the TOC? Perhaps you set a font that is not available on linux so make sure that you use a web safe font. For more information on web safe fonts, see http://www.w3schools.com/cssref/css_websafe_fonts.asp
You can also tinker with your output files. In whthost.js, you can amend the CSS that RoboHelp uses for the TOC. you can add a rule for a sans-serif font the browser can fall back on. See http://www.wvanweelden.eu/webhelp_output_files/whthostjs for more information on the whthost.js file.
Greet,
Willam -
I create a Project and when im working on it every thing is Fine, when finished I close the Project and Save it. But when i am ready to re open it later Only the SMPTE Meter is displays on My Deskktop with The Projects Name in it. Why wont the proect display?
Because you closed the main window before saving. Hit cmd-1 to get it back.
Maybe you are looking for
-
I am having a problem with my WRT54GS router not being able to access the internet. I can see it and administer it via wired or wireless connection. I have tried the below steps in effort to trouble shoot with no success: 1. verified that I am usin
-
We are trying to setup a dashboard to show data from some webservice. The webservice returns data in xml format which does not meet the requirements of the obiee xml gateway component. So we created a cgi app that preprocesses the xml file returned b
-
I keep getting a message on my Mac saying: Shockwave Player Error To view the movie, open your browser in the 32-bit mode. 1) In Safari, select applications/safari in the Finder and click more info 2) Ensure that Open in 32-bit mode is selected 3) Re
-
I want to connect my ibook G4 to my Sony HD TV - I have the adapter that came with the ibook. But, it is so short - When I attach it to the back of my TV and the other end to my ibook - I'm on the back of the TV and can't see. If this is really stupi
-
How to create a database table at runtime
Hai all, i have a table control having the field names as rows, when i select the rows (not all) i want to create a database table( not internal table ) in the background and for that table table maintainence generator also (in abap don;t tell in OOP