Soft subtitles in video files are displayed too small on iPad
I have many mp4 files imported to iTunes Library. They contains some soft subtitles. But when I use iPad to watch, the subtitle is too small. I can't even read it. And iPad has no option to change the font size.
What can I do to solve this problem?
I have the same problem and cannot tackle it down yet. Using handbrake and itunes to sync movies and the subtitles are very small.
Hope someone could help.
Similar Messages
-
The photos are far too small on Ipad ?
I need to find out why the photos are way too small on the Ipad. I used a filter on a photo then sent it to a friend . Way to small to use for any purpose.
any way to make larger?I have the same problem and cannot tackle it down yet. Using handbrake and itunes to sync movies and the subtitles are very small.
Hope someone could help. -
My avi video files are no longer supported in PRE9? Help!
I created a movie in premiere elements 9 several months ago. My video was imported from avi files on my computer. The avi files were originally downloaded from my camera. Everything was fine and I even burned a near finished copy of my project on a DVD. Now, several months later, I open up the project to put my final touches on it and notice that all the avi video files are red in the timeline. On the organizer tab for my project under media type, it says, "offline". So, I clicked on the avi file and it asks me to find it. I find it (the files have not moved) and click on it and I get this error, "Error Message. This type of file is not supported, or the required codec is not installed." This is very strange. Do you have any ideas? My operating system is Windows 7.
I kind of suspected MJPEG (just a hunch, as two other CODEC's, commonly wrapped in an AVI, DivX and Xvid, seldom every play correctly to start with).
Now, there are many "flavors" of MJPEG. It is an older CODEC (or really type of CODEC, as there are so many versions), that was ressurected for use in mostly (then) stills cameras, with video capabilities added. It is not a bad CODEC, but each camera mfgr. has tweaked it for their purposes. This can create issues. MJPEG is not the "universal," that say DV-AVI Type II is. Canon will have a version, Nikon another and Panasonic yet another. They all show as MJPEG, but will be a bit different. A similar analogy can be drawn with Camer RAW files - Canon's differ from Nikon's, which differ from Panasonic's, though they are all Camera RAW. Also, Nikon, for instance, is constantly changing what is in their NEF (Camera RAW) files, so that the newest will require the latest release of Adobe Camer RAW (ACR), to be processed in Photoshop. MJPEG is similar to that, with fewer variations - but still individual variations.
Now, there could well be reasons that things have changed. The first one to strike me would be that you installed the software that came with that camera, and included its specific version of the MJPEG CODEC, then later removed say the camera's utility, taking that specific version of MJPEG away. You might well have others, but PrE is having a hard time matching them up.
In that article I linked to on MJPEG, I mention two popular MJPEG CODEC's, Morgan and MainConcept. Both are rather generic MJPEG CODEC's, and when MJPEG resurfaced, they worked fine for most such files. However, as time has elapsed, and camera mfgrs. tweaked and tweaked, they are less likely to work 100%. Once, they were the "silver bullet" for MJPEG - but not so much any more.We began seeing more users, with either, or even both, still having issues with newer MJPEG CODEC's. As most camera mfgrs. ship a copy of their specific version, somewhere along with the camera, it became common practice to recommend installing that specific version from the specific camera's utility disc. Unfortunately, that was not always easy to do. Some included their version of MJPEG as a separate installation (best way, IMHO), but many incorporated it into the camera's driver installation (still good), and then there are those instances, where the specific version of the MJPEG CODEC is installed along with other utilities on the disc, such as maybe a little editing program, or a file cataloging utility. Scant mention is ever made of the specific MJPEG CODEC, and how it is installed on one's system. The latter method seems to be the most common now. I have the full utilities, including the camera's own editing programs, installed for my Canon, my Nikon and my wife's Panasonic. That means that I have at least five (think that the total count is eight on my workstation) MJPEG CODEC's: one for Canon, one for Nikon, one for Panny, one Morgan and one MainConcept.
What camera produced those MJPEG AVI files?
Do you have that camera's editing and cataloging utility installed?
Do you have the utility disc for that camera?
Have you removed any such editing, or cataloging utility, between the time that the files worked, and when they did not?
I do not believe that any version of PrE actually installs any version of MJPEG (could be wrong here), though they work with, and include various other MainConcept (mostly MPEG) CODEC's. That means that one will need to install an MJPEG CODEC, and the one specific to that camera, might be required.
You obviously do have an MJPEG CODEC (or more), installed in your OS. As there is a vast difference between playback of an AV file, and editing that same file, it could be that PrE is just not able to use the installed version, with those files. As it once was able to edit them, I am guessing that something has changed, and it could be as simple as cleaning out one of the supplied utilities for the camera, that also removed its specific version of the MJPEG CODEC.
As PrE does not install the specific version of the MJPEG CODEC, many recommend not trying to edit such material. I am not of that mindset, but do allow that one might have to do some extra work (and work that is NEVER outlined in the camera mfgr's literature - unfortunately), to get things to work. I had to install a bunch of programs, that I will never directly use, just to be able to edit the MJPEG AVI's from my family's cameras, in both PrE and PrPro. I hate having to do that, as it fills up my HDD with stuff, that will otherwise never be used - but I need the specific CODEC, and it's only available to be installed WITH other software - all too common nowadays, and a mistake on the part of the camera mfgrs. IMO.
Good luck, and I hope that with the specific MJPEG CODEC, you will be back up and editing your footage, as you were once able to do.
Hunt
PS - sorry for writing an entire encyclopedia there, but MJPEG is not as simple as it could be. -
Using Sothink video downloader, normally by default my video files are save in FLV extension. Now for whatever reason suddenly my video files are save in .ebm extension & I can't open my video file. "Save file Type As" -to select file extension does not seem to work -
It's a WEBM video file. My solution was to rename the file to have .webm extension, and play it with the latest VLC Player (2.1, but I think any from 1.1 and upper will solve it too). Just associate .ebm with VLC didn't work. I had to rename the files so VLC knew exactly what that thing was.
By the way, it worked the same way with a .eam file (!), I just renamed the extension to .webm. -
For your reference I’m using a MacBook Pro running 10.5.8. Several weeks ago on a Monday I received an upgrade for iTunes. When Tuesday arrived I attempted to log in so that I could download the latest freebie song(s). I was met w/this message: “The file ‘iTunes Library.itl’ cannot be read because it was created by a newer version of iTunes.”
The music/video files are still on my Mac (I’ve verified that via Searchlight), but I’m unable to open the program. Since I know that 10.5.8 is rapidly becoming prehistoric, could it be that the newest iTunes isn’t compatible w/this particular OS? I’d like to switch up, but understand that the newest OS won’t work on a Mac of this vintage (6 years old). In addition, my Adobe products (all CS2) won’t work w/anything newer than 10.5.8, so I’m reluctant to go to a newer OS (I just can’t afford the Adobe upgrade $$$ @ this point).
Is there any way to get a download of an “old” iTunes version? If there were, I’d simply refuse any future upgrades until my personal economy allows me to stop working as if it were 2006. Please advise, somebody!I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575 -
Video files are playing audio without video (just a black screen)
Video files are playing audio without video. It just shows a blank screen. These same videos work just fine in Chrome, thogh.
Try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting -
App file sharing: files are displayed only the first time...
clicking somewhere else and then back to the application that you want to share files are not there any more.
I've to close and re-open the itunes in order to see them again.
itunes is running on windows 7 64bit.
is this a bug ?
thank you.Hi! I have the same, exact problem. The files are displayed only the first time I look at the apps listed under File Sharing. If I look at another app on the list, the files on the one I previously checked are gone when I look at it again. Is there any way to fix this? I have a Lenovo X61s on Windows XP Professional 32 bit.
-
What video files are supported by iMovie 10.0.6? What is the best way to allow iMovie 10.0.6 accept my .rcproject movies?
Hey Sioux Falls,
If you are looking for information on converting or updating older iMovie projects to iMovie 10, you may find the following article helpful:
Update projects and events from previous versions of iMovie in iMovie (2014) - Apple Support
Note: To clarify, a .rcproject file generally only contains links and references to movie clips and effects that would be part of an iMovie project; it usually does not contain any actual video.
Cheers,
- Brenden -
In the mp3 files are displayed incorrectly Russian tags!
Hello! In the mp3 files are displayed incorrectly Russian tags! As confirmation of sending you a screenshot! What to do? http://fastpic.ru/view/65/2015/0401/94da06b63b4f615fa249661f188a4ea3.png.html
Hi Treenr3,
Sounds like you have been on the right track with regard to troubleshooting this issue. It may be worth going over the font troubleshooting in the following article, just to double check (it refers to a previous version of iTunes, but the troubleshooting steps should be similar).
iTunes 9: Font text is incoherent or appears in a different language
http://support.apple.com/kb/TS3042
It may also be worth trying some isolation troubleshooting in new test user account with just a couple of the tracks that are having issues to see if it persists.
Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Cheers,
- Brenden -
All icons, such as refresh page, back, forward, stop and home etc; are just too small for comfortable use. For now I am uninstalling Firefox 4 and going back to 3.x. even the zoom page icons are too small.
"I had read that GarageBand or the Musical Typing there can sometimes not display properly when the resolution is changed."
Well, did you checked GB after you changed your resolution?
Which setting did you change to?
You & I have the same size iMac screen. My resolution setting is 1280x800. Everything fits perfectly in the windows & on desktop including the menu bar.
All info in my windows are showing. I did not need to adjust my browser font size settings. I am sure you are aware of the browser font size settings. I use FF & the settings are in Preferences>Content.
In the Finder window you can enlarge the icons & fonts also.
Finder>View>Show View Options. -
JTable is display too small, after a pack() it's too height
i have a table of 5 columns and 2 rows
it is placed on a scrollpane and then in an internal frame
the result is a table that is displayed too small (height=32 == getPreferredSize().height)
if i add a pack() statement then it is displayed too big, width is ok but height =~ 500 (should be approx. 100
what to do?thank you! i like the one-liner!
however it works only the first time, not the second time when rows are added
DefaultTableModel model;
JTable table;
String[] columnNames;
Object[][] data;
columnNames = new String[5];
columnNames[0] = "N"; columnNames[1] = "T"; columnNames[2] = "E";
columnNames[3] = "E"; columnNames[4] = "P";
data = new Object[2][5];
data[0][0] = "e"; data[0][1] = "i"; data[0][2] = "e"; data[0][3] = "-"; data[0][4] = "2";
data[1][0] = "s"; data[1][1] = "f"; data[1][2] = "s"; data[1][3] = "2"; data[1][4] = "2";
model = new DefaultTableModel(data, columnNames);
table = new JTable(model);
table.setPreferredScrollableViewportSize(table.getPreferredSize());
// table is show with perfectheight of 2 rows
JScrollPane scrollPane = new JScrollPane(table);
internalFrame.add(scrollPane);
internalFrame.pack();
data = new Object[3][5];
data[0][0]="A0";data[0][1]="A1";data[0][2]="A2";data[0][3]="A3";data[0][4]="A4";
data[1][0]="b0";data[1][1]="b1";data[1][2]="b2";data[1][3]="b3";data[1][4]="b4";
data[2][0]="c0";data[2][1]="c1";data[2][2]="c2";data[2][3]="c3";data[2][4]="c4";
model = new DefaultTableModel(data,columnNames);
table.setModel(model);
table.setPreferredScrollableViewportSize(table.getPreferredSize());
// still a height of 2 rows instead of 3i have the feeling that i make it too complex :-( -
How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English
== This happened ==
Every time Firefox opened
== From the beginningSome add-ons:
Default FullZoom: https://addons.mozilla.org/en-US/firefox/addon/6965 (I use this one)
No Squint: http://urandom.ca/nosquint/
Also:
http://support.mozilla.com/en-US/kb/Page+Zoom
http://support.mozilla.com/en-US/kb/Text+Zoom
http://kb.mozillazine.org/Browser.zoom.siteSpecific -
Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.
Settings>General>Accessibility>Increase Contrast
Settings>General>Accessibility>Bold Text
are some settings that may help.
There are other settings there ...they may not be to your liking but try them all anyways.
But that's about all you can do for now...except to voice your opinion to Apple here:
http://www.apple.com/feedback/ipad.html -
Page content displaying too small to read on all sites
Since updating Firefox to 3.6.10 my pages are displaying so small I cannot read without zooming in on them. I realize you can zoom in and out with the browser but I do not want to do this on every page. This is the reason I stopped using IE when they updated. How do I uninstall the update? I do not want to mess around with this anymore.
If you need to adjust the font size on websites then look at:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
You can increase the String pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 steps to see what works best.
In Firefox 3.6 and later this pref is a String value parsed to a float and allows to fine tune the dimensions of all elements more precisely.
See http://kb.mozillazine.org/about%3Aconfig -
Facebook screen too small on iPAD
Any free Apps available to view facebook with more clarity on screen?
Facebook screen too small on iPAD
With the FaceBook app open tap the circle with an x bottom right side of the screen to expand or minimize the window.
Maybe you are looking for
-
Anybody any ideas?
-
How to make Field "Period/Fiscal Year" dynamic in the program variant
HI All, We have program called "RCRM_FM_ACL_ACCRUAL_RUN" which is used to calcukate accruals in CRM. This program has got a field "Period/Fiscal Year". We want this program to run every day at specific time. So we have created a variant in order to s
-
Is there cookies stored on the ipad
Are there cookies stored on the ipad
-
I just changed my passcode lock for my I-pod touch 4g because some people found out my code. I confirmed it and everything but it still will not work. It said' Passcodes match' now every time I type in the same exact thing it says "Connect to I-tune
-
Imac with bootcamp win7 no sound
Have Imac late 2009. Recently used Bootcamp to add Windows7. Everything started off great, but now no audio. Works perfectly as a MAC. HELP!