Soft thinks and Runtime Error Printing issue!

Whenever printing a document these 3 issues (either 1 or both or all 3 will occur)
When printing with wireless printer C4580 (Windows Vista 32 Bit)
1.It will not recognize the wireless printer and say that it is disconnected.
2. When printing a document sometimes it will not print and a info bubble will pop up on the bottom of the right side of the screen saying "Soft thinks program error" and it says i have to contact the manufacture.
3.EVERYTIME when printing, it will print the document, then this information screen will come up stating:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:C\Windows\SMINST\BLService.exe
This application has requested Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
If anyone has any info to that can help please let me know...especially for #3!
Thanks

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

Similar Messages

I went to download the latest i Tunes update but somehow it went wrong and I ended up removing i Tunes from my system and re installing it but I can't get it to reinstall. I keep getting error massages Error 7(windows error 1114) and runtime error R6034,

I attempted to download the latest i Tunes update but somehow it all went wrong and I have ended up trying to reinstall iTunes but it does not work. I keep getting error messages-Error 7 (windows error 1114) and Runtime error-" R6034 an application has attempted to to load the runtime library incorrectly". Help what do I do now?

Hello there, tulchan.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

Seeking help with PS Elements 11 which does not work with Epson r2000 printer. Epson tech support could not fix, said it is PS e11 problem. Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct. Have set PS to manage color and printer manages color to off. Would appreciate any suggestions. Thank you.

Hi,
Sincerely appreciate your help. Running Windows 7 on a Dell XPS420. System has been very stable for years. Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems. The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints.
Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
Will let you know how things go.
Richard
Date: Thu, 12 Sep 2013 19:47:38 -0700
From: [email protected]
To: [email protected]
Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    created by Barbara B. in Photoshop Elements - View the full discussion
What operating system are you using?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Verify operation failed and Runtime Error While using Adobe Reader 10.1.2

We have installed Adobe reader 10.1.2 on Windows Servers 2008 and user are accessing its using Citrix.When users open PDF files they are getting message "Verify Operation Failed" and also getting error "Runtime Error"
even on one server we updated the version to 10.1.3 but still they are getting same error.
Pdf files open up but after multiple attempt..
Error are provided below

Hi, I have been using Citrix on Server 2008 for quite soemtime. And have not seen any such issues with Reader 10.1.2 and 10.1.3
Can you provide the event viewer log ? Also is the same issue seen while opening PDF in the Citrix Server ? Or it is mainly seen while Citrix Users accessing the published Reader app via Citrix Web URL ?

Adobe CS6/CC and Epson 9900 printer issue

Today I spent about 3 hours trying to print a larger image off an Epson 9900 with no luck. It seemed that no matter how I oriented the image or altered the settings in the printer driver window on the computer, the printer would always start printing from the corner opposite the actual beginning and only print about 2/3rds the length of the image. The print was on a 44" wide space, 32" long with the image centered and measuring 34"x28" in size. Once the file was sent the printer, it would begin to print in the proper margin, but stop the print around 27" instead of 34" and from the wrong corner.
Anyone know why? I think it might be an issue with the latest upgrade as this did not happen a month ago when I printed it the first time and when I plugged in my personal computer, which hasn't been updated yet, it began to print the image without any complications.

Sorry, I was in Photoshop trying to print an image.

Just tried to install update to iTunes and keep getting error statements. The errors statements read: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114) and Runtime error - Program: C\Program files (x86)\iTunes\iTun

I just tried to install the iTunes update 11.4.1 and keep getting error messages. I have never had this issue before over many years of using iTunes and getting updates to the software. I have removed the iTunes from my computer and reinstalled it but keep getting the errors. Here are the error statements: "Runtime error: Program: C:\Program Files(x86)\iTunes\iTunes.exe; R6034; An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

Blank Screen Simulation and Runtime Error 'DATA_BAD_REFERENCE'

Hi Gurus,
I manage to create eCATT for ID creation using TCode SU01 earlier and it works fine - so HAPPY :). Then, I try to develop another eCATT for indirect roles assignment using Tcode PP01 > Position > Relationship B007: AG Role.
However, I'm stuck at the Screen Simulation step to insert the 'Import Parameter' whereby the recorded screen seems to be blank (boxes without text) and when I try to proceed using the 'Next Screen' button, I got the Runtime Error message 'DATA_BAD_REFERENCE'.
Am I missing something here? Or do I need to consult ABAPer to debug the error? Appreciate your guidence on this matter as I'm very very new to eCATT development.
Regards and millions thanks !

Hi,
I have seen the similar issue posted by other users in this forum earlier. But no luck on the solution. I would recommend to insert the import parameter into the interface manually instead of using the simulation screen.
Fields having mode u2018Su2019 (Set) under each dynpro of the command interface contain some value that you entered during the recording. This is the value one needs to parameterize as Import Parameter. so that with next run a new set of data will be passed to the recording. Change the value of the VALIN for these fields and replace with your import variable name.
Hope this will solve your problem.
thanks
Venkat

Rode podcaster and runtime error.

hello, i hope someone can help me with this problem. i purchased adobe auditon 3.0 because i do podcasting and i needed a program that would support 2 usb microphones. well i have no problem getting one of my microphones to record (an MXL usb .006) but when i plug in my rode podcaster and try to use it (and this is with the MXL unplugged, so i havent even tried to use multiple usb mics yet) it gives me a error that reads "microsoft visual C++ runtime library" as the header, then it reads "runtime error! program:...rogram files (x86)\adobe\adobe audition3.0\audition.exe
this application has requested the runtime to terminate it in an unusual way. please contact the application 's support team for more information."
the laptop is running windows vista, the 64 bit version.
so can anyone give me an idea what to do next?

>and i have no clue what you mean when you say use the wdm usb driver rather then the asio ones, so any advice there would be appreciated.
Well, this is the simplest explanation I can manage that explains the important principles:
WDM drivers are the ones that Microsoft intend to work with the OS (Windows Driver Model), and they allow for the use of multiple spund devices - wherever and however they are attached. But, these drivers have inevitably got a higher latency (delay introduced in processing signals), because they sit nearer to the top of the processing heirarchy in the OS. ASIO gets around the latency problem by short-cutting most of the OS, and allows software using its engine to talk more or less directly to your sound device - singular. To use any more than a singular device would require the arbitration that the OS would have to provide, thus destroying the point of doing this in the first place.
What ASIO4ALL does is to take the ASIO-based stream from Audition, or any other software using the same engine, and convert that back to a WDM-based internal protocol. It is bi-directional, so signals coming in (like from your USB mics) can be converted from their WDM format into ASIO for Audition, as well. As a consequence, ASIO4ALL can redirect a multi-channel stream to different devices, and can also take multiple input streams from them as well, combining them into a concurrent ASIO stream. There are several penalties to be paid though - the increased latency is one, and also you could
potentially run into sync problems, but not with the application you have in mind, I think.
There is one important bit in the ASIO4ALL FAQ that you should note, but a comment on it is needed:
>After some initial troubles with earlier revisions, the driver now appears to work just fine with numerous USB devices. one thing to not do, I mean: not ever! is to check the DMA box with USB devices. If you do not need all the additional software gizmos like EAX, EQ, Fake3D-Whatever... it is recommended that you _not_ install the drivers shipped with your USB audio interface. Windows has a built-in generic USB audio driver that works with most devices. Thus, if you want to have honest, no-nonsense, low-latency audio playback/recording with your USB audio interface - by all means: stick with the Windows driver! This is especially true for consumer grade stuff, where you can be assured that the drivers shipped with it are most likely 'consumer grade' as well.
One of the problems with USB mics is that you may well need to install at least the control applet for it, otherwise it
may not be usable sensibly at all. But, USB mics vary - so what you would need to do in any given situation, I can't comment on. In the past though, it's been pretty apparent that without the control applet, at least some of them have no sensible gain control or routing. But I would emphasise that this is very much a YMMV situation.
>i freely admit i need to do more research and reading on the software, but i have been told by people using multiple usb mics that this is what they used, or at least earlier versions of adobe audition.
That would be true. The earlier version referred to would probably be 1.5, which was the last version to use the built-in WDM system for recording, although all earlier versions could do this too, at least in principle. I believe, though, that there were other difficulties recording from USB sources with earlier versions, so all bets are off unless you've actually tried what you want to do with a specific hardware/software combination and actually
know it works.

SAP Query and runtime error CREATE_OBJECT_CLASS_NOT_FOUND

Dear ABAP gurous,
I have created a query connected to an infoset. It worked fine. When I made a minor change to the infoset (checked, saved and generated afterwards) I couldn't run the query. Now, the problem is, when I run the query, the ABAP runtime error occurs:
Runtime Errors CREATE_OBJECT_CLASS_NOT_FOUND
Except. CX_SY_CREATE_OBJECT_ERROR
Can somebody tell me what causes the problem? Did I miss to do something after introducing this minor change to the infoset?
Thank you in advance and regards
Rafal Kosinski

In the infoset I had tables join (FEBKO+T001) and additional field group. For the field group I defined a field for which a code was created (a function module call). It worked for this setup.
Then, I just made a change in the code: in the function module call, I changed
sy-datum to febko-azdat for parameter DATE of the function module.

OpenPS4MSP Version 2.02 and Runtime error 429

Hi,
I don't have experience of intergration Project System(PS) & MS Project. I have done following steps and got error message Runtime error 429
1. Install fully SAPGUI on client pc ok. sapgui and server IDES work well
2. Install OpenPS4MSP Version 2.02 on client PC ok.
3. Open Connection from OpenPS4MSP to server ok
4. Menul -> OpenPS --> Download Project: Display a dialog, Choose Project Definition, Click on ... button, And then the error message "Runtime error 429" occurs
Please Help!!!
Thank you very much
Long
Message was edited by:
Long Nguyen

I have the same error to.... sometimes thats not happend and show me a mensage to insert the note 166870... and that note are for version 4.5 and I´m working at ECC 6.0.
Someone can help ?

Need help with Photoshop and Runtime Error

Runtime Error Photoshop & MS Visual C++ WIN7 32bit Photoshop will appear to launch then dies with a ('MS Visual C++ Runtime Error!' = Application requested the runtime to terminate it an unusual manner. Contact application's support team for more information).
Anyone have clue as to how this can be fixed and not lose all currently loaded brushes, styles, actions, etc?

You need to provide much more info, like exact system specs and crash details:
Working with your Operating System’s Tools
Also hold down Ctrl+Alt+Shift during program startup to reset the prefs to defaults. If the error is caused by damaged presets, actions or whatever, then you will lose some of that, otehrwise they will be untouched.
Mylenium

Reader X and Windows 7 Printing Issue

We have upgraded are PC from windows xp to windows 7 64bit. When i try to print a PDF from the internet, sometimes it will print then, most of the time the PDF goes to non-responsive. I have to start the task manager and end the task, which closes the browser only thing i have found to work is if i do a resart of the PC.

Good day,
Could you provide some additional details about both the file and your system's configuration?
What version of Adobe Reader X do you have installed? (Help > About Adobe Reader)
If you haven't updated to 10.0.3, please do so and see if the issue persists.
How was the PDF file you're searching created? (File > Document Properties > What does the PDF Producer line say?)
Are you experiencing this with multiple files?
Have you installed SP1 for Windows 7?
Regards,
David
Acrobat Community Manager
Adobe Systems

OS X 10.4.6 and Linksys PPSX1 printing issue

I recently upgraded to Tiger from Panther with a couple of regrets, one of which is related to using a Linksys PPSX1 Etherfast Print Server. Under Panther I had successfully created a printer using LPD/LPR, naming a que and selecting my printer (an NEC SuperScript 1800 with a PostScript upgrade). The SuperScript has only a parallel interface (which is why I bought the parallel printer version of the Linksys Print Server).
I also have a Windows PC and I share an internet connection with the G5 using a Linksys Cable/DSL router (hard-wired, not wireless). The Windows machine can print to the SuperScript via the Print Server (which occupies a port on the Cable/DSL router) without a hitch. My G5 did too, under OS X 10.3 Panther. But Tiger refuses to allow me to set up a printer using LPR. It allows only the LPD option.
For their part Linksys is no help. They don't promise any functionality using a Mac. And ditching the SuperScript is out of the question. Even though it's 8 years old it's a magnificent printer: 1800 dpi and very fast.
Help, please.

It's a lot easier than going to the Advanced menus...
When you click ADD, the first window that comes up is ususally the default browser box. At the top of that window there are two icons - the right one being IP printer. Click on IP printer and then you are given a pull-down with three TCP/IP protocol choices. Choose LPD from there.
Now for the harder part. On windows they have setup software - on OS X we have to handle details ourselves. The most common problem is not entering the print server's queue name for the IPP and LPD protocols. You can find the queue name in the print server manual. L1 lp, lpt1, etc are common queue names.

Excise duty condition type and Purchase Order Print Issue

Dear Friends,
We have a issue related to Purchase order print out.
We are maintaining TAXINN.
We have implemented CIN and we are maintaining Excise Conditions i.e. Basic Excise in JMOP
In FV11 we are maintaining values for JMOP with plant and material Group combination.
In Purchase Order Tax calculation is happening correctly.
But issue is to find the value of taxes for Purchase Order Print.
We are using function module CALCULATE_TAX_FROM_NET_AMOUNT
and passing values of Company Code, Country, Currency, and Base amount to get the entries in condition types.
But we are not getting any entry even after passing the values.
How we can get these values in JMOP.
Regards
Kant

Why do you want to calculate the taxes during the PO Print when you are getting correct values in PO itself?
Modify your print program with pulling values directly from EKPO/ EKKO Tables and display it to Spool.
check with ur ABAP Person

Java Update won't work and runtime error

I have 2 problems.
1. First, I am running Windows Vista and Internet Explorer 7. I also use Firefox 2.0.0.11.
I have Java SE Runtime Environment 6, but when I try to download Update 3, this is the message I receive on both IE and Firefox:
*"This installation package could not be opened. Verify that the package exists and that you can access it,*
*Or contact the application vendor to verify that this is a valid Windows Installer package."*
2. Second, this is my problem when I try to play Text Twist on Yahoo Games: On IE, I get a message stating that the Runtime has requested that the program terminate it in an unusual way. Then IE closes.
On Firefox, the game simply never loads.
When I first got my computer with Windows Vista, I was able to play this game. I don't know what's changed to cause this error to happen.
If any one can help me, I will appreciate it very much.
Thank you,
Joy

I guess I posted to the wrong forum. {embarrassed}
I found the solution for my problems in the forum for java errors. It worked. Thank you.
>
I had this problem with JRE 1_5_0_09 - after beating it to death, I finally got it.
Note that JRE did NOT appear in my add/remove programs list - also it did not appear when I ran the windows install clean-up utility msicuu2.exe.
However, when I browsed to
Documents and Settings\User\Local Settings\Application Data\Sun\Java
I found a folder named jre1.5.0_09 containing the MSI file which installed JRE perfectly.
I am not sure if everyone with this problem will have the JRE file there, but I imagine that if it's NOT there, placing it there from another system and then running it might also work.
good luck.

Soft thinks and Runtime Error Printing issue!

Similar Messages

Maybe you are looking for