Soft Tints Not Showing on Spyder Calibrated monitor

We have a 23" mac monitor connected to this computer via either a ATI Radeon HD2600XT or Nvidia GeForce 8800 GT. We have calibrated this monitor with no luck getting it to show soft tints or tones properly. However - here is the bizarre thing - unplug the DVI connector and reconnect it seconds later and lo and behold the soft tints show up fine. Restart the system and you are back with the problem.
Anybody know of a fix that would be appreciated. We have other macs and two other 23" monitors that do not have the same problem.

Another post mention universal access viewing as the problem and indeed it was!

Similar Messages

Clips not showing up on NTSC monitor when editing

I have a Sony DSR-11 and Sony NTSC monitor connected to my computer.The clips are not showing up on the monitor when I am editing. They show up when I am in Log and Capture. Is there anything I can do to get this to work again?
Thanks

Start with the basics.
View> video playback > apple firewire ntsc (or pal if you swing that way)
View> external video > all frames
View> external audio > audio follows video
View> refresh all devices
x

My computer is not showing up in share monitor

Hi
I was happily creating and sharing files to Vimeo from Final Cut Pro x - When I had a kernal panic - Hard reset and now "My Computer" does not show up in share monitor - It says no clusters found - When I goto share a file to vimeo now nothing happens ..
Any clues - I am going mad....

There is nothing to fix, it is not supposed to show up there. It will only show there as a 'camera' if there are photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc which you might want to then copy to your comptuer.
What do you want to do with the iPad via My Computer ?

:: NWA does not show table view for monitoring reports ::

Hi,
We are facing an issue in one of our portal system.
I click on Portal index page, then I go to Net weaver Administrator --> Monitoring --> Java system reports.
Here I get the resource utilization graphs.
The graphs show proper values however when I click on table view it does not show any value or table at all.
Then I click on Settings button, and click on Persistent radio button.
It asks to enter the number of days for which the the data should be stored.
I gave it as 2 days and click on Apply button.
It shows a message saying "changes would be effective after restarting monitoring service".
However when I go there i.e. NWA --> Administration --> Applications
I get below services
cafruntimemonitoring~ear
com.sap.ip.bi.sdk.monitoring
tclmwebadminmonitoravail~wd
tclmwebadminmonitorcomplib~wd
tclmwebadminmonitorprovider_ear
tclmwebadminmonitorstate~wd
tclmwebadminoverviewmonitoring~wd
tcmonitoringsysteminfo
Would you kindly suggest which service from above list should be restarted ?
Thank you, Regards,
Girish Garje.

I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

RED footage not showing up on external monitor (CS6)

Hello all,
When I select a RED clip (R3D) and place it in the source window to play it back. It does not show up on my external monitor. (via Blackmagic Intensity Pro).
However, it shows up once placed in the timeline.
This is a problem because when attempting to play footage back for my client, they can not see the image.
Thanks!
- Ryan

I have cs6 but dont have BM card and dont do what youre doing on set etc... but have worked on sets a lot and if youre trying to show producer, director, client ...stuff.... fast.... the best thing is just to do what works fastest... IMO you should just dump your clips into a sequence ( call it previews or something )... timeline and play the stuff so the program monitor is getting the and in turn going to your external monitor.. You can also ( at that point.. on timeline ) decide what to do with fast color correction type stuff ( looks etc ).... so they see something at least close to what they wanna see....
The source monitor has traditionally been a way to set in out points to sorta do a quick edit of what you wanna use... and drop that into timeline from there...it was never intended to be a program monitor...and thats what BM is also dealing with.
good luck..

Droplet jobs submitted not showing up in Batch Monitor

I am compressing MP4 files in large batches of 100-150 files at a time by dragging them over a droplet. I can submit about 4-6 batches in a row, but after that Batch Monitor does not appear to accept anymore batches.
I can continue dragging files over my droplet and submit the batch. The process completes as if the batch was submitted successfully, but it never shows up in batch monitor and the output files are never created. Any ideas?
I have three, dual-quad Intel machines with 8 GB of RAM in their own private cluster processing my jobs.

Setting found to increase number of jobs.

Device NOT showing up on my monitor when plugged in?

Iphone plugged in.
Device not showing up? Any ideas?

You're welcome.
This link applies to a Mac.
http://support.apple.com/kb/ts1591

Submited Jobs not showing up in Batch monitor

I just got done with a reinstall of compressor and Qmaster with some positive results. I can now start a quickcluster just fine, and have it show up in compressor and submit to it. When i click the submit button, The batch doesn't show up in batch monitor. Even when i try submitting it "My Computer" it still fails to show up in batch monitor.
Anyone have any ideas?

Batch monitor was set to list completed jobs. I'm an idiot.

Color Corrector's Frame Viewer Split Not Showing Up On External Monitor

Kind've a long title - sorry - but . . . here's my question:
Why am I not able to see the Frame Viewer's split on my external monitor?
A further, more detailed explanation of the problem:
I recently purchased Ripple Training's Color Correction with Andrew Balis. It's very, very imformative and I think will help a lot when it comes time to begin color correcting the feature I'm working on. The section I'm on shows the Frame Viewer tab in the Tool Bench window that presents itself when one opens Color Correction under the Arrange area. In other words, Arrange>Color Correction sets up your windows for color correcting with your Viewer, Canvas, and Tool Bench windows aligned from left to right. When one opens up the 3 Way Color Corrector on a clip and makes a change in the clip, the Frame Viewer tab in the Tool Bench window will show a split screen where on one side you'll have your clip with the color correction you just did, and the other side un-color corrected. Isn't this (split) image supposed to show up in your external monitor just as the images in the Canvas and the Viewer?
That doesn't seem to be happening on my external monitor.
I'm not sure if this problem/issue I'm having is related to the muticlipl issue I posted in an earlier thread http://discussions.apple.com/thread.jspa?threadID=1330596&tstart=0
perhaps.
Any help on this issue would be greatly appreciated.
Thanks in advance,
Javier Calderon

Ahhh, Shane. So it's as simple as that? So then there's nothing wrong with my setup or my external monitor? FCP's just not designed to show the Tool Bench's Frame Viewer image in your external monitor? Wow . . . Well that answers that then I guess. And you're right . . . that IS indeed kind've lame . . .
Thanks.
Javier
. . . um . . . doesn't that kind've defeat the purpose of proper color correction then (regarding the Tool Bench's Frame Viewer anyway)? If the only place you can see your color corrected Frame Viewer split images is on a monitor that's NOT suited for color correction? Anyway . . . just a thought . . .

Effects Controls will not show up in source monitor

I started a project last month using the trial. Now I have a paid student/teacher membership. Ever since it's been a nightmare of crashes and bugs.
All I need to do before finishing this edit is add a mosaic effect to a few clips. The effects window shows up for a few minutes randomly on reboot of the program but then soon disappears if I click off it. 99% of the time it doesn't show up at all.
I double click the clip I want to add the effect, it pops up in the source monitor. I then click Window, Effects Controls and all it shows in source is the name of clip highlighted in blue but nothing else.
I have reinstalled twice now, nothing changes.

I think you've proved the issue here was an update in CC and migrating the project file forward. And yes, since that was started on the other machine, there was an update.I wish this could simply be a painless process, but as Adobe staffer Kevin Monahan posts here quite a bit, it ain't. He's a long-time pro editor and was a member of one of the FCP design teams a number of years back, and was also a certified teacher of FCP back a decade ago or so. As he notes, he's always taught keeping any project on the software version it started on if at all possible. No matter the NLE, migrating a project forward has some possibilities of working fine ... BUT ... if anything does not work fine, this is BAD. Clients screaming & refusing to pay bills for late work, badmouthing one about the "hood" ... none of this any delight to anyone. In these days where an update can come every few months rather than say every 18 months, it's a pain in some ways. So he recommends keeping each major iteration (full number of PrPro, such as 6, 7, or 8) "live" on your machine as they can exist in parallel.
New major upgrade, start new projects on it. Keep old projects on old versions. And for continuing projects, keep working in the old while migrating COPIES of assets into a new project, testing as you go along, this way moving everything forward while still working away. When the new project is fully functional, then archive the old one & move on.
Some work ... but dang, having major shutdowns under multiple looming deadlines is past annoying. Well.
Neil

Ram not showing up in activity monitor

I recently upgraded to 8gb of ram (4x1gb) that came with the computer and (2x2gb) that I just recently bought. I know this isn't the ideal setup for speed but I just wanted more.
While I had activity monitor open tonight I noticed that the RAM that was showing up in use under the System Memory tab didn't add up to 8gb but instead only 5gb. If I view "About this Mac" the correct 8GB shows up and also shows up correctly in System Profiler.
Was just wondering if anyone else has noticed this kind of behavior as well?
Thanks,
Andrew

Then there is a difference between Activity Monitor and that shown in About This Mac? I would first check that the RAM is installed correctly. See the following:
About RAM installation in the Mac Pro
Mac Pro memory arrangement photos
Mac Pro Memory Configuration
Memory Tests- "2008" Mac Pro
Ram should be installed minimally in matched pairs and optimally in matched quads. This means the memory modules are the same size and specifications. They should also be equipped with the Apple-certified style of heat sink.
I'm puzzled by your profile info. You say your MP is a 3.0 GHz model but you list it as a Mac Pro 1,1. The 3.0 GHz model only started with the 2,1 version. The 1,1 model was only 2.66 GHz.
I would also open System Profiler and see what it reports. If it is reporting 8 GBs, then check in Activity Monitor if it's listed as (64-bit) Intel or just Intel. If the latter then you don't have the current version of Activity Monitor. This might result from doing an upgrade to Snow Leopard as opposed to erasing the drive and doing a fresh installation of SL, especially if the upgrade was done from Tiger rather than Leopard.

Dual processor not showing up in Activity Monitor

I have a dual processor G5 PowerPC at work and when I look at the CPU Activity Monitor it shows me the activity on both processors. My Mac Pro at home is also a dual processor but when I look at the activity monitor it only shows one processor thread. Is this normal or is there something wrong with my Mac Pro? Anyone else notice this as well?

Hi KSStudio. A few questions to clarify.
1. Is this a dual or single cpu machine?
2. How many cores per machine?
Check it out...
Assuming you have a dual cpu (8 core) 2009 mac pro, when you use activity monitor choose > Window > CPU Usage. You should see a floating window with 16 panes. (8 panes if you have a single processor/4 core model) Under normal loads using 10.5 you should see some activity in all 16 panes. Under normal loads using 10.6 you should see activity in odd numbered panes. You will see activity in even numbered panes when the load is high. This is normal and due to Snow Leopard's improved utilization of processor technology.
Hope this helps.
--Jesse

Windows xp extended desktop not showing up on 2nd monitor all of a sudden

I've used a 2nd monitor as my main monitor for my T61. I powered down today to move to another location, when I reconnected to my usual 2nd monitor, the screen just comes up blue, the cursor jumps between my 2 monitors, but there is no Windows coming up on the external monitor 2. Usually everything boots up automatically to both of my monitors.......I've gone into Windows XP display settings, extended the desktop - but still nothing - just blue with the cursor either on my laptop monitor 1 or jumping over to external monitor 2. Help?

Try this:
1. Go to Display Settings and set the Display to setting 1. (Multiple Monitors) and exit settings.
2. Press Fn and F7 until BOTH Monitors are Shown.
3. You shouuld be able to select Either or Both Monitors in Sequence.
I replaced my BIOS Battery and had the same problem.

Compressor 4 files not showing up in Batch Monitor

Appartenly Batch monitor doesn't work with compressor 4. Using a droplet and I can't monitor the progress. Any thoughts?

Batch Monitor got replaced by "Share Monitor".
Two ways to start monitoring:
1. check the "Automatically launch Share Monitor" in Compressor 4's Preferences
2. Nagiate intoi the Compressor 4 Package and there to /Contents/PlugIns/Compressor/CompressorKit.bundle/Contents/EmbeddedApps and start Share Monitor from there
Either way I recommend to stick it to the Dock once you've opened Share Monitor successfully.

Not showing dashboard in cisco Enterprise License Manger

Dear All,
i have install CUCM 9.1 in UCS BE6000K
while installation i select only CUCM and installtion done
but when i access the CUCM after entering the ip address in the brower it's showing CUCM and Enterprise License Manger
CUCM is working fine i configured few parameter
issue when i click on Enterprise LIcense Manger i log in it's showing noting is there in the GUI page i can see only on top of the page left side corner Enterprise license manger and in right side top of the corner log in , about etc.
why is not showing this parameter like monitoring, dashboard, license usage,license management, inventory,administrion in the Enterprise License Manger

Hi Lalesh,
there is a bug
https://supportforums.cisco.com/thread/2252230
ELM GUI not displaying on Chrome 29+ and Firefox 25
CSCul30396
Description
Symptom:
ELM GUI does not display properly, only the page header is visible.
Conditions:
User is trying to access ELM using the latest version of Chrome or Firefox.
Workaround:
The ELM GUI displays properly on both Internet Explorer 9 and 10, as well as Safari (Mac and Windows).
regds,
aman

Soft Tints Not Showing on Spyder Calibrated monitor

Similar Messages

Maybe you are looking for