Softphone Jabber client unable connected

Hi All,
i've configure cisco IM and Presence v10 integrated to CUCM v10 some service running well (UDS, CTI Deskphone, VM, Presence) but Jabber client cannot connect to Softphone  (SIP) and i was configure ucsf(Client Service Framework) for jabber client.
please your advice.
thank you

Hi amit Kumar
thanks for your information and i've configure it. i found CTLSEP not found from wireshark capture .
Is there something wrong?
thank you

Similar Messages

  • Jabber Client through Collab Edge dials MCU - no Video

    Hi There,
    I think this is a licensing issue, but would need clarification as to what is required.
    We have Jabber Clients externally connecting through Collab Edge,  Jabber to Jabber video works great, but when conferencing the client gets only Audio.  (this is expected).
    We have implemented a software MCU via a SIP trunk from the CUCM which works fine internally, but when Jabber clients dial this through Collab Edge, no video is received or sent.
    My understanding is some "Rich Media" license is required on VCSe or VCSc?  Can someone explain what is required or another way to accomplish multiparty video using external jabber clients?
    Thanks

    Rich media sessions licenses are only required if you need to video call people outside of your organization, that is the registration of the remote user's endpoint doesnt register to the CUCM that is integrated with MRA.
    Are you using device mobility by any chance and have you set certain locations for users who come in through MRA? Does this location have enough bandwidth for video?

  • Jabber Client softphone is "No Connected"

    Hi,
    I am trying to setup a lab for cisco partner testing. I created Collab 10.5 topology with cucm & cups 10.5. I am running out of ideas of what could be wrong. My jabber client for windows works with deskphone but it does not work with it's softphone (CSFXXXXX). Yes, i have CCMCIP profile created, user & device associated but still does not work both within lab network or external network
    I am seeing the error below when I do a show connection status for the softphone - see attachment
    Connection error. Ensure the server information in the Phone Services tab on the Options window is correct.
    I do not have the "Phone Accounts" under options. I even uploaded jabber-config.xml file to tftp server and still no phone accounts tab. I can ping the cti hostname & ip from the pc i am working.
    SOS
    TIA
    Jeya

    Actually, I read it on a thread in this community. I just went thru’ the deployment guide and I saw that section too.   I have uploaded it to the tftp server and no change for the phone tabs. Only the Directory service becomes online after uploading that file but no change on the phone account tabs. Below is the contents of  the jabber-config.xml file that I generated using the file generator tool:
    <?xml version="1.0" encoding="utf-8"?>
    <config version="1.0">
     <Options>
       <StartCallWithVideo>false</StartCallWithVideo>
       <Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
     </Options>
     <Phone>
       <TftpServer1>hq-cucm-pub.abc.inc</TftpServer1>
       <CtiServer1>hq-cucm-pub.abc.inc</CtiServer1>
       <CcmcipServer1>hq-cucm-pub.abc.inc</CcmcipServer1>
     </Phone>
     <Policies>
       <EnableSIPURIDialling>true</EnableSIPURIDialling>
       <DirectoryURI>mail</DirectoryURI>
       <ServicesDomainSsoEmailPrompt>OFF</ServicesDomainSsoEmailPrompt>
     </Policies>
     <Presence>
       <PresenceServerAddress>hq-cups.abc.inc</PresenceServerAddress>
     </Presence>
     <Directory>
       <ConnectionType>1</ConnectionType>
       <PrimaryServerName>directory.abc.inc</PrimaryServerName>
       <BDIPrimaryServerName>directory.abc.inc</BDIPrimaryServerName>
       <ServerPort1>389</ServerPort1>
       <BDIServerPort1>389</BDIServerPort1>
       <UseWindowsCredentials>0</UseWindowsCredentials>
       <ConnectionUsername>Administrator</ConnectionUsername>
       <BDIConnectionUsername>Administrator</BDIConnectionUsername>
       <ConnectionPassword>1vtG@lw@y</ConnectionPassword>
       <BDIConnectionPassword>1vtG@lw@y</BDIConnectionPassword>
     </Directory>
    </config>
    Thks!
    Jeya

  • Softphone feature for Cisco Jabber Client

    Hello everyone,
    I have a CUCM cluster v.8.6.2 and a CUPS v.8.6.4. I've installed my full CUWL licenses as well as my CUP Licenses AND the Jabber for Everyone COP file. I've managed to install Jabber on Mac and on Windows and have all the features such as Chat, Desktop phone integration and Visual Voicemail with Cisco Unity Connection working as well. The only feature I'm having a huge hassle getting to work is the Softphone feature. I've tried adding a CUPC device with the user (btw everything is integrated and uses LDAP for authentication) as the digest account for it as well as the Owner ID. I've tried adding a CSF device as well (I remember reading it somewhere) but the Jabber client never discovers a Softphone device and all of the options on the client are grayed out for me to put in the device settings. I thought I saw it once looking for a device name CSFACILLI (ACILLI being my username) in the System Diagnostics for the Jabber for Mac client but now it just shows:
       Soft Phone Server
    Server Address:           cucm02.mycompany.net
    Server Port:                     2748
    Server Protocol:           --
    Device:                               --
    Line ID:                               --
    Status:                               Disconnected
    Any help or thoughts on this would be greatly appreciated! Thanks!
    Tony

    Aaron,
    Here's the bit I found interesting from the reporting function:
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::downloadConfig -- begin:
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::getCnfFile -- begin: , strDeviceName.c_str()=CSFacill, bHttp=FALSE
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CTFTPClient::Get -- begin: , remotefile=CTLFile.tlv, host=cucm02.mycompany.net, bIsAsyMode=TRUE, port=69
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -  TFTP_Error Select error
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -  TFTP_Error Can't get packet, retrycount=3
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -   CTFTPClient::ContinueGet -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CTFTPClient::Get -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -  CTFTPClient::ReceiveData -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::getCnfFile -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::downloadConfig -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CPhone::setPhoneMode -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xb030b000] -  CTFTPClient::ReceiveData -- begin: , nCookie=5, bIsAsyMode=TRUE
    It looks like it's trying to get CTLFile.tlv from my TFTP servers (which are my subscribers). I went under TFTP File Management under OS Administration on the Subscribers and no such file exists. Is this something I have to download from Cisco? It does look like it's trying for the correct device, just can't get the Configuration File it needs... Your thoughts?
    Thanks,
    Tony

  • Can jabber client connect to external other telepresence devices?

    Hi. I have some questions about jabber environment and jabber client.
    1. When I want to use jabber on Mobile, I know it would be needed Anyconnect VPN feature of ASA.
        But, if CUCM and CUP have public IP address:ignoring security issues for test,
        Can Mobile(using celular network) device use jabber application without VPN, TURN, STUN or ICE Server?
    2. I heard CUCM interwork with VCS-Control through SIP Trunk, VCS-Control deliver data to VCS-Expressway for Exteran connection.
        If then, Can internal Jabber Desktop user call to External teleprsence deivce such as HDX8000 of Polycom?
    3. I know Jabber Mobile clients do not support video presence yet, except for I-PAD.
        So, when does Jabber client support video presence feature? I think I have waited enough.
    thank you for inconvenience reading, because of none-mother language.

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

  • Unable to Externally Register Phone Services on Cisco Jabber Client via Expressway E

    Hi,
    I have currently deployed Cisco Jabber along with Expressway C and E for external regeneration without VPN. I have successfully registered IM and Presence service externally on the internet and I am able to chat with other Jabber users.
    I am not able to register phone services for Cisco Jabber client who are registering externally over the internet without VPN.
    I have checked that all the users are able to use IM and Presence along with Phone services in the internal network and over the internet using VPN. I have configured the required DNS SRV records on both the internal and external DNS Servers.
    I am attaching a screen shot of the Jabber Client that is registered over the internet along with this post for your reference.
    Appreciate if you can share your thoughts on the same.
    Please do let me know if you need any further informaiton.
    Thank you.
    Regards,
    Joseph Chirayath.

    I am testing with an android device, and I had to add a "digest user" on the BOT device in order for this to work. Phone services are now connected.

  • VMware SQL 2008R2 bcp error - SQLState = 08001, NativeError = 0 Error = [Microsoft][SQL Server Client 10.0] Client unable to establish connection due to prelogin failure

    Can someone help me resolve this error?   Thanks  
    Windows Server 2008 R2  Standard SP1 64-bit -  SQL Server 2008R2 Standard 64-bit 
    VMware vCenter Server Version 5.1.0
    SQLState = 08001, NativeError = 0
    Error = [Microsoft][SQL Server Native Client 10.0]Client unable to establish connection due to prelogin failure
    bcp program: 
    bcp SYM.dbo.ACCOUNT in "D:\Data\SQLExtract\EXTRACT.ACCOUNT" -f"D:\Data\SQLCommands\FMT.ACCOUNT" -S DEV-DATA\TEST\ -T -oSYMLOAD.LOG Type SYMLOAD.LOG >> SYMLOAD.LOG.CUMULATIVE
    The bcp program executes successfully on a local instance of SQL Server.

    The error has nothing to do with BCP as such, but it is a connection problem. That is, for some reason you cannot connect to your instance from the VM. I would exect that you face a similar problem if you tried SSMS.
    It could be a firewall issue, but prelogin suggests that you reach the instance. But possibly you don't come far enough for the login failure to be recorded. Possibly the instance is not configured to audit login failures.
    The message you would see would be similar to
    2010-08-18 14:11:30.91 Logon       Error: 17809, Severity: 20, State: 3
    Possibly followed by a a line that details the message. The error number may be different.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Sybase odbc driver client unable to establish a connection

    Please some one help me at this. I am new to sysbase.
    I am try to create dsn name for sysbase.
    While connecting sysbase i gave sa as user name and administrator as password.
    Its connecting and show master db and some other db.
    After that i am trying to create dsn. While i creating dsn i gave
    1) Hostname as my system hostname.
    2) Database name as master db
    3) Logon Id as sa (sa is my user name i gave)
    4) Port : 5000
    When i click test connection it asked password. i gave as administrator.
    After few seconds it show sybase odbc driver client unable to establish a connection error.
    I provide screenshot what i did and what error is occured.
    Please guide me at this.

    Hi Srinivasan,
    This is the first thing I noticed. You have a Windows 2012 R2 box. Make sure you install the SDK 15.7 SP130 or later or SDK 16.0 PL04 or later. We just got the SDK certified with the R2 box so the installation runs correctly.
    Second thing, when you run the odbc manager if you are creating a system dsn you need to start the Windows odbc manager as administrator on a Windows 2012 or Windows 8 box or you get permission issues on this system.
    Third thing you should pay attention to is if the application is a 32 or 64 bit application. This decides if you run the 32 or 64 bit Windows odbc manager.
    If your still having problems please tell me and I will investigate. I got a Windows 2012 R2 box with SDK 15.7 SP130 and it seems to be working fine.
    Thanks,
    Dawn Kim

  • Client unable to establish connection; 08001;

    Hello,
    My SSAS multidimensional cube processing fails with the following error:
    "OLE DB error: OLE DB or ODBC error: A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to
    allow remote connections. For more information see SQL Server Books Online.; 08001; Client unable to establish connection; 08001; Encryption not supported on the client.; 08001"
    It was running fine with no errors till yesterday. Does anyone know what may be wrong?
    Could it be because of a new firewall rule on the server that host the SQL server?
    Appreciate your help!
    Thanks!

    Hi Nihcas,
    Based on the error message, it seems that the account cannot connect to the data source of the SQL Server Analysis Services database. And you said that a new firewall rule on the server that host the SQL server, then this issue can be caused by this firewall.
    To access an instance of the SQL Server through a firewall, you must configure the firewall on the computer that is running SQL Server to allow access. The firewall is a component of Microsoft Windows. In your scenario, please try to configure the Windows
    Firewall to Allow SQL Server Access and check if the issue is persists or not.
    http://msdn.microsoft.com/en-us/library/cc646023(v=sql.105).aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • Can't connect with Windows Jabber client

    Dual environment with Xserve authenticating to Active Directory domain controller. iChat is setup and is working for Mac users using Adium and iChat. However I cannot get any Jabber clients for Windows to authenticate. Both Pidgin and Psi error - "Authentication failed - no mechanism available".
    All accounts are Active Directory accounts (Mac & Windows).

    Hello again.
    Try this. Stop the iChat Server. Using a text editor edit the file /etc/jabberd/c2s.xml Look for the section that talks about <mechanisms> Disable ( comment out thus <!-- and --!> ) all apart from <cram-md5/> for and <digest-md5/> and restart iChat server again.
    As you gathered - forward and reverse DNS's have to be correct.
    Tim

  • Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows

    Hi,
    I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
    I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
    Problem Faced -
    I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
    Can you please let me know if any of you guys have faced a similar issue.
    Please let me know if you need any information regading the configuration used.
    Looking forward for your valuable comments.
    Thank you.
    Regards,
    Joseph Chirayath.

    Hi Will,
    I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
    Please do let me know if you need any further information.
    Thank you.

  • WLAN Clients unable to access the Gateway when more than 2 clients connect

    Hi,
    I have a problem with a 2106 WLAN Contoller.
    The clients can connect and associate to the WLAN and get their IP details via DHCP from the internal DHCP server. However, only 2 clients can get out through the gateway at any one time. All other clients that connect will get their DHCP addresses(that match the config of the 1st 2 clients), but they cannot get to the gateway. They can ping any client on the WLAN and the controller.

    Hi,
    Please post the IP configuration for your gateway, the working clients and the clients having problems.
    Regards,
    Kristofer

  • Client unable to connect AP with MAC filtering

    I need some help from you, I found problem that some clients cannot connect to AP( but some client can connect as normal). As I checked from logs, I see a lot of messages as below:
    Nov 18 01:13:55.760: %DOT11-4-MAXRETRIES: Packet to client 0023.68be.1c88 reached max retries, removing the client
    Nov 18 01:13:55.760: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0023.68be.1c88 Reason: Previous authentication no longer valid
    Nov 18 01:13:55.763: %DOT11-4-MAXRETRIES: Packet to client 0023.68be.1c88 reached max retries, removing the client
    After that I tried to reload AP and then it can connect as normal but I found the log that it roaming to another AP in the same SSID as log below:
    Nov 21 08:52:12.147: %DOT11-6-ROAMED: Station 0023.68be.1c88 Roamed to 003a.99e6.6860
    Nov 21 08:54:33.855: %DOT11-6-ROAMED: Station 0023.68be.1c88 Roamed to 003a.99e6.6860
    Nov 21 09:04:34.495: %DOT11-6-ASSOC: Interface Dot11Radio0, Station  0023.68be.1c88 Reassociated KEY_MGMT[NONE]
    Nov 21 09:04:39.097: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0023.68be.1c88 Reason: Sending station has left the BSS
    Nov 21 09:04:39.103: %DOT11-6-ASSOC: Interface Dot11Radio0, Station  0023.68be.1c88 Reassociated KEY_MGMT[NONE]
    Nov 21 09:04:42.309: %DOT11-4-MAXRETRIES: Packet to client 0023.68be.1c88 reached max retries, removing the client
    Nov 21 09:04:42.309: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0023.68be.1c88 Reason: Previous authentication no longer valid
    Nov 21 09:04:42.315: %DOT11-4-MAXRETRIES: Packet to client 0023.68be.1c88 reached max retries, removing the client
    I've check from CISCO document, this problem may be from Radio Interference, so please help to investigate and find out the root cause that why some clients cannot connect to AP at that time and how to prevent this problem occurred again.
    Thank you in advance.

    Hi @Krish1840 , and thanks for the reply!
    Do the pages come out blank when making a copy as well?
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps
    After the updates, I would recommend readding the printer via OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    Good luck and please let me know how it goes!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Clients unable to connect and get DHCP - LAP1142N AP and 5508 WLC

    Hi,
    I have 19 locations, each with 1 or more LAP1142N AP's in FlexConnect mode, AP's are primed using CAPWAP to my 5508 WLC at the datacenter. The AP's join the WLC without issue every time. I have two WLAN's, one guest and one staff, the guest network is open and obtains DHCP from a WatchGuard XTM33 firewall at each of the remote locations. The staff side is WPA2/RADIUS and DHCP is assigned from the WLC. Each AP is assigned a static IP that is not in the DHCP scope. For example: DHCP scope on the branch firewall is 192.168.1.10-250 the AP will be assigned static IP of 192.168.1.1.. The AP's are connected to a HP procurve switch that has a untagged VLAN, the firewall is using the native vlan 1 and so is the AP.
    I have been running this network for over a year and it has not had a single issue until the last two weeks. Nothing on the network has changed or has been upgraded.
    Now for the issue: The issue I am seeing is that clients are no longer able to connect to the AP and do not get DHCP assigned to them. I am able to get it working, if I remove the static IP from the AP, the AP will reboot, join the controller, then begin working, users can connect and DHCP is assigned from the firewall as it should. However, If the AP then reboots, the AP will join back to the controller but no clients can connect nor do they get a DHCP address. So, I then reassign a static IP to the AP again and it reboots, connects to the controller and clients then can connect and get DHCP.
    Attached is a running config from one of the APs
    I've found several posts on this topic, in fact the patch of unassigning or reassigning static IP is one that I found. However, I wanted to post this to see if there is any further assistance I can get on this. I am also waiting on my SmartNet to start up and will be contacting Cisco support as well.
    Thanks for any help.

    Alright, so I finally figured out the issue with this. I had a Mobility Anchor set on the guest WLAN and once I removed that all started working again.
    What is Mobility Anchor?
    A. Mobility Anchor, also referred to as Guest tunneling or Auto Anchor Mobility, is a feature where all the client traffic that belongs to a WLAN (Specially Guest WLAN) is tunneled to a predefined WLC or set of controllers that are configured as Anchor for that specific WLAN. This feature helps to restrict clients to a specific subnet and have more control over the user traffic. Refer to the Configuring Auto-Anchor Mobility section of Cisco Wireless LAN Controller Configuration Guide, Release 7.0 for more information on this feature.

  • Linux Clients Unable to Connect to VPN

    Hello all,
    There are a few linux clients that need to be able to access our OS X VPN server but I have been unsuccessful at setting up a connection. I have enabled PPTP and windows clients can connect just fine, but using the linux network manager, I cannot connect, I just get a 'Connection Failed' message. I have tried both locally and via internet.
    Has anyone had success connecting a linux machine to the os x vpn? Any configuration ideas? I can post the vpn logs if that would help.
    Thanks
    Greg

    Greg,
    I've never gotten this working either, and I'm surprised how little information I found after hours of googling and reading.  Have you made any headway?
    -Aaron

Maybe you are looking for