Software 02D - Computers with specific software installed - Help

Want to Add Username and if possible Displayname to this report can someone tell me how to modify this report to make this happen?

More info:
Create Custom Reports for ConfigMgr 2012 with Report Builder
http://www.scconfigmgr.com/category/reporting/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

SCCM 2012 Report that shows the users with specific software installed

Hi,
Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
1. Adobe(all versions)
2. Photoshop(all versions)
3. MS Project(all versions)
4. MS Vision(all versions)
Regards, Lorin Davis

Take a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.

TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?

Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file?

Computers with Java pre-installed

I am working with a customer looking to purchase a numnber oif PCs for a Java application and am looking for a list of namer brand computers that come with Java pre-installed. I know Dell pre-installs Java, but they are particularly interested in HP systems. Does anyone know of a comprehensive list of PC verndors who pre-install Java, and if not, if specifically HP pre-installs?
Thanks,
Greg

Thanks for the replies. I know it is easy to install, we are a Java developer, it's just a question from my customer. This sort of information should be made readily available by Sun.
Anyone have any idea about HP?

ITunes 9 install problem: software for communicating with ipods not install

I downloaded and installed the update for iTunes 9 via apple software updater last night, and when I started iTunes I got the error "The software required for communicating with iPods and Mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?" I click yes, and it says it couldn't fix the problem.
I followed the instructions here (http://support.apple.com/kb/HT1923) to completely uninstall itunes and quicktime and all supporting components, including mobileme and bonjour and then reinstalled iTunes9 using the setup file downloaded from apple.com. Still no luck! I get the same error when I start iTunes.
any suggestions? Help! Should I go back to the older version of iTunes?
btw, when I uninstalled iTunes, I kept my library files and two plugins around: last.fm scrobbler and mmkeys. Does this matter? I don't think so: I tried removing the plugins and I still got the same error.
I'm running Vista 64bit, and I used the 64 bit installer.

For those using Windows 7 64-bit, I also experienced this frustrating installation error. However, tonight, I was finally able to install iTunes 9 without getting the communication message by setting the compatibility tab under the properties tab of the installer to the following settings:
- check "run this program in compatibility mode for Windows Vista Service Pack 2"
- check "run this program as an administrator"
- launch the installer by right-clicking and selecting "run as administrator"
After selecting those options and also uninstalling iTunes and the Apple Mobile Device Support, iTunes 9 finally installed without any glitches on my Windows 7 OS.
Unfortunately, I don't have any advice for Vista users except for the already posted recommendation to use the 32-bit installer.
Message was edited by: Peter Lee

Software for communicating with ipod not installed correctly?

I cant download the new itunes 11.0.1 as keeps coming up with invalid or corrupt signature. So downloaded it onto another laptop and then copied it over. When opening it comes up with the following message "the software required for communicating with ipods and mobile phones was not installed correctly, it asked if you want itunes to repair it and when you say yes it doesnt repair. Tells me to re-install itunes which i cant do. Any ideas?

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

Does messages only work with specific software?

ANSWER.

Welcome to the Apple Support Communities
Messages only works on Mountain Lion. See > http://support.apple.com/kb/HT5395?viewlocale=en_US&locale=en_US

Office 2013 updates fail on computers with Access 2013 installed

I have about 10 workstations with the combination of Windows 7 enterprise 32 bit, Access 2013 and Office 2007 installed.
SCCM offers up both Office 2007 and Office 2013 updates to these machines, but the Office 2013 updates, fail to install.
The same thing happens when I go to Microsoft updates and manually install the required Office 2013 updates.
I read that one of the updates required Office 2013 sp1.
But when I downloaded it, it won't install: KB2817430 "The expected version of this product was not found on the system."
This is the second month I've had the failures. I removed KB2878316 and KB2889927 from my deployments and packages to stop repeated install attempts.
But this month I've got a new on failing, KB2899493.
Is there a way around this problem?

Thanks, I couldn't really find anything but it looks as though this could be just the way it is.
from http://support.microsoft.com/kb/2784668
When you start a version of Access on a computer that has multiple versions of Access installed, the Windows Installer may start, and
a message that states that the Windows Installer is preparing to install Access may be displayed before Access starts.
Every time that you start Access 2003, Access 2007, or Access 2010 after you use Access 2013, the Windows Installer repair operation registers
that version of Access. Similarly, the Windows Installer repair operation registers Access 2010 every time that you start it after you use an earlier version of Access. This does not occur when you start Access 2002, nor does it occur when you start the same
version of Access again.
Is this likely to also apply even when running App-V?

DVCPro HD Codec for computers with Final Cut installed?

Why does the DVCPro HD Codec download say "DO NOT INSTALL CALIBRATED{Q} DECODE CODECS ON SYSTEMS WITH ANY VERSION OF FINAL CUT PRO INSTALLED"? I would like to be able to play HD quicktime videos, but I have Final Cut Express on my computer. Can I not download the codec? Is there something else I can download instead? Any advice would be appreciated, thanks!

Hi and welcome to Discussions,
Pro is not Express.
FC Pro supports DVCPro HD natively and thus the installation of the Calibrated one might interfere with it.
http://www.apple.com/finalcutstudio/finalcutpro/broad-format-support.html
FC Express is not mentioned as being not supported, so you might go ahead and install it.
Regards
Stefan

Newbie with specific application -needs help

I own this website www.artevinowinery.com (in development). I
am trying to make the bottle on the left be an interractive tool
where mousing over it will call up the choices for the type of
product in a new window, then clicking on that choice will change
the master image and store their choice in a database for future
"checkout". I also want them to be able to upload their own image
for the label part of the design and move it around the bottle then
record the X,Y positions so we can make the bottle for them. I am
not a programmer. Any suggested referrences I can use to get this
done in the next 6-8months?

I own this website www.artevinowinery.com (in development). I
am trying to make the bottle on the left be an interractive tool
where mousing over it will call up the choices for the type of
product in a new window, then clicking on that choice will change
the master image and store their choice in a database for future
"checkout". I also want them to be able to upload their own image
for the label part of the design and move it around the bottle then
record the X,Y positions so we can make the bottle for them. I am
not a programmer. Any suggested referrences I can use to get this
done in the next 6-8months?

Software Inventory Reporting with computer name on SCCM 2012

Hi All,
I am just trying to use "Count of all instances of software registered with Add or Remove Programs" from SCCM 2012 Report modules but its giving with collection id only ..
as i am trying to include in this with computername instead of Collection id but i am unable to get that.
is any one help me to get the list of software's name with counts inclusive of computernames
KJSUBBU

The issue with your request is that the COUNT statement gives numbers of distinct values.
For example, you wish to count all instances of "Microsoft Office 2007 Professional Plus" - That program name is a distinct value and there may be 50 instances in your environment.
BUT, when you add the computer name to this - e.g. MACHINENAME "Microsoft Office 2007 Professional Plus" you will always count 1 for each value and the query will yield 50 rows, because each machine name is a distinct value, despite
there being many instances of Office... the COUNT statement checks all values in the SELECT statement as part of the distinct value.
Here is an example:
SELECT
v_GS_SYSTEM.Name0,
v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
COUNT(*) AS Qty
FROM
v_GS_SYSTEM
INNER JOIN
v_GS_ADD_REMOVE_PROGRAMS ON v_GS_SYSTEM.ResourceID = v_GS_ADD_REMOVE_PROGRAMS.ResourceID
WHERE
v_GS_ADD_REMOVE_PROGRAMS.DisplayName0 = 'Google Chrome'
GROUP BY
v_GS_SYSTEM.Name0,
v_GS_ADD_REMOVE_PROGRAMS.DisplayName0
Will yield the following results:
Name0             DisplayName0     Qty
TSTWIN7-01     Google Chrome    1
TSTWIN8-01     Google Chrome    1
I agree with Garth's post that you need to gather mgmt.'s requirements for this data first. If they are wanting reports which show counts of software, AND where that software is installed, you will need two separate reports: 1) summary
report of counts and 2) drill-down from the summary showing where a specific piece of software is installed.
Report for 1) is canned - "Count all instances of software registered in Add or Remove Programs"
Report for 2) is also canned - "Computers with specific software registered in Add Remove Programs"
The second report is a drill-down from the first when you click on the software Display Name link in the report.
I imagine that your company is looking to checking license counts and that if you ask further, you will find the specific software for which they are searching. This will also be a good exercise for you to become familiar with the auditing process
for annual true-ups, if you have not gone through this before.

Create a User Collection with installed specific software

Can someone help with Query to Create a User Collection with installed specific software.
I have created a collection for Computer Collection with installed specific software but i need to push apps on users and for that i need to create a user collection with specific software installed.
Thanks

Yes. I have created device collection with
installed specific software and used this collection to pull report from out the box report for Primary Device users( Not sure about exact report name but similar) for
this collection. Did some excel work to find primary device user.
But looks like there is no straight forward solution. It would be great if i know how to import multiple users from a text/csv file into a User collection.
Thanks

Computers with a specific file

Does anyone know how I can scan for computers that have PST files on them?? I tried using "Home >ConfigMgr_ATT >Software
- Files > Computers with a specific file" but I can't get it to reply with any files.

Hi,
to manage computers with a specific file you need to enable software inventory and file detail collection inside the client settings.
Once the rules have been established and deployed to your client computers then they should report their file version and you'll be able to run reports against that data.

I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and other things I might install on my computer. With a PC it's really easy, you just go to the control panel.

I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and anything else I may install on my computer. With PC it's very easy, you go the control panel, locate what you want to uninstall and with a few clicks it's done. Can someone please help me? Thank you.

See these:
Switching from Windows to Mac OS X,
Mac Basics—Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Apple How-To Guides for Mac OS X,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mavericks Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

SCCM 2012 Query report for specific software installed.

I have Reporting point installed and it seems to be working as I was able to run OS reports.
Here's what I would like to do.
1. I need a query/report to show us all the machines that do not have Microsoft Forefront Endpoint Protection installed.
2. I also need a query/report showing what machines still have Sophos AV installed.
Any help is greatly appreciated it.
Thanks,
Voev

I was not able to use the Reporting to get computers without FEP installed. So I did a workaround.
Create Device Collection for computers with FEP installed
1. Device Collections => Create Device Collection =>name it "Computers with FEP installed=> Query Rule Properties => Edit Query Statement => Criteria tab => Add the following statements
Criterion Type: Simple value
Where: Installed Software - ARPDisplay Name
Operator: is equal to
Value: System Center 2012 Endpoint Protection (as appeared in Add/remove program name)
Create Device Collection for computers without FEP installed
1. Device Collections => Create Device Collection => Name "Computers without FEP Installed" => Query Rule Properties => Add Rule => Include Collections => Tick "All Systems" => OK => then you need to add
the Exclude by => Add Rule => Exclude Collections => Tick " Computers with FEP Installed => OK
So in my "All Systems" Collection has 1000 members
Computers with FEP Installed collection has 900 members
Computers without FEP Installed collection has 100 members
Add the with FEP installed & without FEP installed collections together is equal to 1000 members of the All Systems.

Software 02D - Computers with specific software installed - Help

Similar Messages

Maybe you are looking for