Software and Interface card required for DNP3 communication with a protection relay?

I am looking to build a SCADA Master to perform DNP3 communication between the Master and an Outstation device. I would like to know apart from the Ni - Industrial comm software is there any other Interface card I require to accomplish this task?

According to this article, that’s all you need. Just make sure you run applications as an administrator and that you don’t have any type of network restrictions. Since you have it installed, I encourage you to test the functionality/connectivity through the shipping examples, which are located on your hard disc at ...LabVIEW XXX\examples\DNP3 folder (also visible at the NI Example Finder). You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
Alejandro | Academic Program Engineer | National Instruments

Similar Messages

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

What are the video card requirements for running a 23" cinema display

What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
Intel P4 3.0ghz Windows XP

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

Smart card required for interactive logon

Hi ,
what is the meaning of these in AD. These options are available in user properties in the Account TAb.
1-Smart card required for interactive logon.
2-Account is trusted for delegation
3-Account is senstive cant be delegated
4-Use kerberos DES
5-Dont Require Kerberos
Regards
Anil

Hello,
You will have to logon to domain using a Smart Card. Interactive logon: Require smart card
Allows a service running under this account to perform operations on behalf of other user accounts on the network. A service running under a user account (otherwise known as a service account) that is trusted for delegation can impersonate a client to gain
access to resources on the computer where the service is running or to resources on other computers
You can use this option if the account, for example a Guest or temporary account, cannot be assigned for delegation by another account.
Provides support for the Data Encryption Standard (DES). DES supports multiple levels of encryption.
Provides support for alternative implementations of the Kerberos protocol.
For a full explanation refer to below links:
Understanding User Accounts
Delegating authentication
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

Hi James ,
Make sure you are entering the correct serial number.Try it once again and check.
If it fails please get in touch with Adobe Support.Here is the link for the same.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Regards
Sukrit Dhingra

HT1933 My ex-boyfriend stole my email address and credit card information to make purchases with Apple and now my Apple ID account has a balance. Is there any way I can retract the purchases so I don't have to pay for his theft of my information?

My ex-boyfriend stole my email address and credit card information to make purchases with Apple and now my Apple ID has a balance. Is there any way I can retract the purchases so I don't have to pay for his theft? I had no idea he had done this until I tried to sign in to the ITunes store and found all his information and a whole bunch of song purchases. I had to go to my email and reset everything. I only have a 2.10 balance due to him, but I just want to find out if there is a way to erase it because of this circumstance.

You need to immediately pull credit reports to see what else he has done. Then "freeze" the credit report at all three agencies. That way even you need to lift the freeze to add credit cards or other credit items to your SSN.

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

Creative cloud keeps asking me to license my software and then it asks for a serial number

it keeps asking me to license my software and then it asks for a serial number, i do not have a serial number with creative cloud just a order number what do I do?

For me this guideline helped:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
In my case, I had to remove the following lines from the hosts file:
120.0.0.1 lmlicenses.wip4.adobe.com
127.0.0.1 lm.licenses.adobe.com
After that all worked again. Hope this helps.
Jan

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

Thanks for the reply.
But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same?

WEB Server And Database Space requirements for deploying Web Application

Hi,
We are in requirement of WEB Server And Database Space requirements for deploying our Web Application in cloud server. We want to know technical requirements and feasibilities laid by Microsoft team for deploying web
application.......
Regards,
Sreenivasa M S

Hi,
Please refer this link and check if it helps:
http://blogs.technet.com/b/cbernier/archive/2013/09/24/deploy-your-web-application-to-windows-azure-from-with-visual-studio.aspx
Regards,
Azam Khan

Interface Builder encountered an error communicating with the iPhone Simulator

Hi,
I downloaded the latest iOS SDK and tried simple helloworld program. Once I try to build it in the xcode, it shows the following 2 errors. I tried to re-install the SDK several times, and it doesn't work.
CompileXIB MainWindow.xib
cd /Users/qingzhao/Desktop/ch1/HelloWorld
setenv IBCMINIMUM_COMPATIBILITYVERSION 3.2
setenv PATH "/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin:/Developer/usr /bin:/usr/bin:/bin:/usr/sbin:/sbin"
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/qingzhao/Desktop/ch1/HelloWorld/build/Debug-iphonesimulator/HelloWorld.a pp/MainWindow.nib /Users/qingzhao/Desktop/ch1/HelloWorld/MainWindow.xib --sdk /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk
2010-09-22 13:07:18.333 ibtool[1155:607] Assertion Failure: [toolTask isRunning]
2010-09-22 13:07:18.337 ibtool[1155:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-09-22 13:07:18.337 ibtool[1155:607] Line: 140
2010-09-22 13:07:18.519 ibtool[1155:607] Backtrace:
0 IBCocoaTouchPlugin 0x00000001039b7dcc IBAttachToCocoaTouchTool + 1669
1 IBCocoaTouchPlugin 0x00000001039b5e9f IBAskClassInTargetRuntimeForValueForKeyPathUsingRe sultMarshallerWithContext + 147
2 IBCocoaTouchPlugin 0x0000000103a2d963 IBReleaseIsWildcat + 1791
3 IBCocoaTouchPlugin 0x0000000103a2d538 IBReleaseIsWildcat + 724
4 IBCocoaTouchPlugin 0x0000000103a2d57b IBReleaseIsWildcat + 791
5 IBCocoaTouchPlugin 0x00000001039b29f9 IBReplaceClassNamePrefixWith + 1588
6 IBCocoaTouchPlugin 0x00000001039b682e IBBuildMarshalledDescriptionOfDocument + 2093
7 IBCocoaTouchPlugin 0x00000001039b0515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
8 IBCocoaTouchPlugin 0x00000001039abcad IBUISegmentConfiguration + 2784
9 ibtool 0x000000010000829f
10 ibtool 0x0000000100006e0c
11 ibtool 0x0000000100003161
12 ibtool 0x0000000100001dbc
2010-09-22 13:07:18.519 ibtool[1155:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
2010-09-22 13:07:18.520 ibtool[1155:607] Assertion Failure: NO
2010-09-22 13:07:18.520 ibtool[1155:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-09-22 13:07:18.520 ibtool[1155:607] Line: 351
2010-09-22 13:07:18.521 ibtool[1155:607] Backtrace:
0 IBCocoaTouchPlugin 0x00000001039b5f62 IBAskClassInTargetRuntimeForValueForKeyPathUsingRe sultMarshallerWithContext + 342
1 IBCocoaTouchPlugin 0x0000000103a2d963 IBReleaseIsWildcat + 1791
2 IBCocoaTouchPlugin 0x0000000103a2d538 IBReleaseIsWildcat + 724
3 IBCocoaTouchPlugin 0x0000000103a2d57b IBReleaseIsWildcat + 791
4 IBCocoaTouchPlugin 0x00000001039b29f9 IBReplaceClassNamePrefixWith + 1588
5 IBCocoaTouchPlugin 0x00000001039b682e IBBuildMarshalledDescriptionOfDocument + 2093
6 IBCocoaTouchPlugin 0x00000001039b0515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
7 IBCocoaTouchPlugin 0x00000001039abcad IBUISegmentConfiguration + 2784
8 ibtool 0x000000010000829f
9 ibtool 0x0000000100006e0c
10 ibtool 0x0000000100003161
11 ibtool 0x0000000100001dbc
2010-09-22 13:07:18.521 ibtool[1155:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
What can I do ? Thank you very much!!!

I found this on stack overflow.com and thought it would apply to this article discussion for some users even though I don't understand how to revert the version (through git?)
I think this is a compatibility issue. I think the .xib has moved to Xcode 4 (as shown by the line setenv IBC_MINIMUM_COMPATIBILITY_VERSION 4.2) which Xcode 3.2's version of ibtooldoes not understand.
I think you need to revert to a version of the .xib prior to the update to Xcode 4.""

Interface Builder encountered an error communicating with the iPhone Simula

Hi,
I downloaded the latest iOS SDK and tried simple helloworld program. Once I try to build it in the xcode, it shows the following 2 errors. I tried to re-install the SDK several times, and it doesn't work.
CompileXIB MainWindow.xib
cd /Users/qingzhao/Desktop/ch1/HelloWorld
setenv IBCMINIMUM_COMPATIBILITYVERSION 3.2
setenv PATH "/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin:/Developer/usr /bin:/usr/bin:/bin:/usr/sbin:/sbin"
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/qingzhao/Desktop/ch1/HelloWorld/build/Debug-iphonesimulator/HelloWorld.a pp/MainWindow.nib /Users/qingzhao/Desktop/ch1/HelloWorld/MainWindow.xib --sdk /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk
2010-09-22 13:07:18.333 ibtool[1155:607] Assertion Failure: [toolTask isRunning]
2010-09-22 13:07:18.337 ibtool[1155:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-09-22 13:07:18.337 ibtool[1155:607] Line: 140
2010-09-22 13:07:18.519 ibtool[1155:607] Backtrace:
0 IBCocoaTouchPlugin 0x00000001039b7dcc IBAttachToCocoaTouchTool + 1669
1 IBCocoaTouchPlugin 0x00000001039b5e9f IBAskClassInTargetRuntimeForValueForKeyPathUsingRe sultMarshallerWithContext + 147
2 IBCocoaTouchPlugin 0x0000000103a2d963 IBReleaseIsWildcat + 1791
3 IBCocoaTouchPlugin 0x0000000103a2d538 IBReleaseIsWildcat + 724
4 IBCocoaTouchPlugin 0x0000000103a2d57b IBReleaseIsWildcat + 791
5 IBCocoaTouchPlugin 0x00000001039b29f9 IBReplaceClassNamePrefixWith + 1588
6 IBCocoaTouchPlugin 0x00000001039b682e IBBuildMarshalledDescriptionOfDocument + 2093
7 IBCocoaTouchPlugin 0x00000001039b0515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
8 IBCocoaTouchPlugin 0x00000001039abcad IBUISegmentConfiguration + 2784
9 ibtool 0x000000010000829f
10 ibtool 0x0000000100006e0c
11 ibtool 0x0000000100003161
12 ibtool 0x0000000100001dbc
2010-09-22 13:07:18.519 ibtool[1155:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
2010-09-22 13:07:18.520 ibtool[1155:607] Assertion Failure: NO
2010-09-22 13:07:18.520 ibtool[1155:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-09-22 13:07:18.520 ibtool[1155:607] Line: 351
2010-09-22 13:07:18.521 ibtool[1155:607] Backtrace:
0 IBCocoaTouchPlugin 0x00000001039b5f62 IBAskClassInTargetRuntimeForValueForKeyPathUsingRe sultMarshallerWithContext + 342
1 IBCocoaTouchPlugin 0x0000000103a2d963 IBReleaseIsWildcat + 1791
2 IBCocoaTouchPlugin 0x0000000103a2d538 IBReleaseIsWildcat + 724
3 IBCocoaTouchPlugin 0x0000000103a2d57b IBReleaseIsWildcat + 791
4 IBCocoaTouchPlugin 0x00000001039b29f9 IBReplaceClassNamePrefixWith + 1588
5 IBCocoaTouchPlugin 0x00000001039b682e IBBuildMarshalledDescriptionOfDocument + 2093
6 IBCocoaTouchPlugin 0x00000001039b0515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
7 IBCocoaTouchPlugin 0x00000001039abcad IBUISegmentConfiguration + 2784
8 ibtool 0x000000010000829f
9 ibtool 0x0000000100006e0c
10 ibtool 0x0000000100003161
11 ibtool 0x0000000100001dbc
2010-09-22 13:07:18.521 ibtool[1155:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
Exception backtrace:
(null)
Exception infonull)
/* com.apple.ibtool.errors */
/Users/qingzhao/Desktop/ch1/HelloWorld/MainWindow.xib: error: ibtool failed with exception: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1158) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
Exception backtrace:
(null)
Exception infonull)

I'm using 10.6.4 and having the same issue. Reinstalled the newest SDK a few times (Xcode 3.2.4 with 4.1 of the iOS SDK). I can't build anything to run on the iPhone Simulator, but building regular Mac apps works fine. Here's what it tells me when I try to build and run:
CompileXIB MainWindow.xib
cd /Users/myusername/Development/iTennis
setenv IBCMINIMUM_COMPATIBILITYVERSION 3.2
setenv PATH "/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin:/Developer/usr /bin:/usr/bin:/bin:/usr/sbin:/sbin"
/Developer/usr/bin/ibtool --errors --warnings --notices --output-format human-readable-text --compile /Users/myusername/Development/iTennis/build/Debug-iphonesimulator/iTennis.app/M ainWindow.nib /Users/myusername/Development/iTennis/MainWindow.xib --sdk /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk
2010-10-26 17:07:21.838 ibtool[1428:607] Assertion Failure: [toolTask isRunning]
2010-10-26 17:07:21.934 ibtool[1428:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-10-26 17:07:21.934 ibtool[1428:607] Line: 140
2010-10-26 17:07:22.016 ibtool[1428:607] Backtrace:
0 IBCocoaTouchPlugin 0x000000010383ddcc IBAttachToCocoaTouchTool + 1669
1 IBCocoaTouchPlugin 0x000000010383be9f IBAskClassInTargetRuntimeForValueForKeyPathUsingResultMarshallerWithContext + 147
2 IBCocoaTouchPlugin 0x00000001038b3963 IBReleaseIsWildcat + 1791
3 IBCocoaTouchPlugin 0x00000001038b3538 IBReleaseIsWildcat + 724
4 IBCocoaTouchPlugin 0x00000001038b357b IBReleaseIsWildcat + 791
5 IBCocoaTouchPlugin 0x00000001038389f9 IBReplaceClassNamePrefixWith + 1588
6 IBCocoaTouchPlugin 0x000000010383c82e IBBuildMarshalledDescriptionOfDocument + 2093
7 IBCocoaTouchPlugin 0x0000000103836515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
8 IBCocoaTouchPlugin 0x0000000103831cad IBUISegmentConfiguration + 2784
9 ibtool 0x000000010000829f
10 ibtool 0x0000000100006e0c
11 ibtool 0x0000000100003161
12 ibtool 0x0000000100001dbc
2010-10-26 17:07:22.017 ibtool[1428:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1431) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
2010-10-26 17:07:22.018 ibtool[1428:607] Assertion Failure: NO
2010-10-26 17:07:22.018 ibtool[1428:607] File: /SourceCache/IBCocoaTouchPlugin/IBCocoaTouchPlugin-123/IBPlugin/Utilities/IBObj ectMarshalling.m
2010-10-26 17:07:22.018 ibtool[1428:607] Line: 351
2010-10-26 17:07:22.019 ibtool[1428:607] Backtrace:
0 IBCocoaTouchPlugin 0x000000010383bf62 IBAskClassInTargetRuntimeForValueForKeyPathUsingResultMarshallerWithContext + 342
1 IBCocoaTouchPlugin 0x00000001038b3963 IBReleaseIsWildcat + 1791
2 IBCocoaTouchPlugin 0x00000001038b3538 IBReleaseIsWildcat + 724
3 IBCocoaTouchPlugin 0x00000001038b357b IBReleaseIsWildcat + 791
4 IBCocoaTouchPlugin 0x00000001038389f9 IBReplaceClassNamePrefixWith + 1588
5 IBCocoaTouchPlugin 0x000000010383c82e IBBuildMarshalledDescriptionOfDocument + 2093
6 IBCocoaTouchPlugin 0x0000000103836515 IBBestTargetRuntimeForConversionFromTargetRuntime + 18393
7 IBCocoaTouchPlugin 0x0000000103831cad IBUISegmentConfiguration + 2784
8 ibtool 0x000000010000829f
9 ibtool 0x0000000100006e0c
10 ibtool 0x0000000100003161
11 ibtool 0x0000000100001dbc
2010-10-26 17:07:22.020 ibtool[1428:607] Message: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1431) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
Exception backtrace:
(null)
Exception info:(null)
/* com.apple.ibtool.errors */
/Users/myusername/Development/iTennis/MainWindow.xib: error: ibtool failed with exception: Interface Builder encountered an error communicating with the iPhone Simulator. If you choose to file a crash report or radar for this issue, please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" and include their content in your crash report.
Failed to determine the value for systemColors of UIColor.
Exception name: IBAssertionFailure
Exception reason: Interface Builder encountered an error communicating with the iPhone Simulator. "Interface Builder Cocoa Touch Tool" (1431) failed to launch and exited with status 11. Please check Console.app for crash reports for "Interface Builder Cocoa Touch Tool" for further information.
Exception backtrace:
(null)
Exception info:(null)

Is any 3rd party hardware/platforms required to enable communi with SAP?

Hi Gurus,
What server side hardware/platforms are required to enable communication with SAP mobile devices? What would be a typical production setup? Would there be any 3rd party components here that would require licensing?
Thanks in Advance,
Dharani

Hi,
if you want to communicate with SAP Mobile devices - you need a SAP Netweaver installation in Mobile UsageMode. This is called the middleware system. It is not recommended to have this setup onn your Backend system but to have a dedicated server for it - cause of Workload, performance and monitoring.
If you run MI client on a PDA - then you need to install NSICom Creme as Java runtie on PDA - but the license is already included in SAP MI lizensing cost.
If you have to support larger Datasets, then you might need to install DB2e as persistence layer. This causes an additional licensing you need to pay to IBM - I think via SAP, but well, at the end you need to pay something on top if you run DB2e. The normal used persistence is free of charge. It is called FileIO up to MI7.0, with MI7.1 it is called MinDB.
So all you really need, is a dedicated Netweaver Mobile Box.
Hope that helps!
- oh I have seen - check your other post on that topic as well .--- this post here is for occasionally connected apps - this other post talks about MobileOnline as well---
Regards,
Oliver
Edited by: Oliver Kaluscha on May 23, 2008 3:47 PM

I updated my computer to the new software and now the iPhoto has a circle with a line through it. When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

I updated my computer to the new software and now the iPhoto has a circle with a line through it. When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1" When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application". I checked and there is nothing under the "purchases" in my App store. Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store. Please try again". Just want to know how do to fix.

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

How to use Crossbow Xmesh WSN LabVIEW drivers for downstream communication with motes

Hello,
I am trying to use LabVIEW Crossbow Xmesh WSN driver for downstreaming commands but driver programs are not working.
I am interested in changing node (Iris mote with MDA300 board) update rate from LabVIEW program running on host PC .
I have used Set node update rate.vi with open stream.vi and start stream.vi in proper sequence and developed a program to change node update rate. When program is run no error is shown but node update rate is not changed.
Pl suggest what I should I do.
What is the function of WSN write VIs (WSN write Raw 1sensor1point). For what type of message this is used.
I want to actuate relay on MDA300 with mote id 2. What VIs (from driver ) I have to use and how to issue command related to it.
Incase any one can help I will be grateful
Roop

Hi Arjun,
I am sending you snap shot of VI developed to change node update rate.and also the heirarchy of drivers VIs used in the program for better understanding .
In case you can figure out why the command message send is unable to communicate with mote .
Also for downstream communication with motes the packet format used is described in Moteworks user manual from MiMSic.com
I think the developer of these drivers can help you out in solving my problem.
Thanks
Roop
Attachments:
sreenshot to arjun ni for checking downstream comm.doc ‏288 KB

Software and Interface card required for DNP3 communication with a protection relay?

Similar Messages

Maybe you are looking for