Software based Video Mixer??

Im looking for a software based video mixer for OS X, such as these:
http://www.varasoftware.com/products/wirecast/
http://b-l-a-c-k-o-p.com/CamCamX.html
Except, I need atleast 3 video source inputs (CamCam only has 2) and I dont want it to be more than $100 (WireCast is ~$450). For the price of WireCast, I rather just by a real video mixer. Any help? Thanks!
GC

Google what you need or try versiontracker.com

Similar Messages

  • Video mix mixer mixing software for Mac

    I need to mix text slides (jpg) with live video before it is recorded or sent to Ustream. I need a video mixing software for Mac.

    I don't have a lot of experience with it, but I would suggest you take a look at BoinxTV.
    http://boinx.com/boinxtv/overview/

  • Problems with getting signal to my Video Mixer with DVI to Comp adapter

    hi, i have a MacBook Pro and a G5 Quadcore with an NVidia7800GT card. i am trying to get my G5 to detect my Edirol V4 video mixer. the MBP sees it immediately. the G5 cannot detect it!
    what i have tried so far:
    - swapped the DVI-Comp adapters i have on the MBP with the G5
    - tried the DVI to VGA adapter - works fine on the G5
    - swapped out cables (even though they are brand new)
    i have a show on the weekend and need to solve this asap. can anyone help me figure out why the G5 won't detect the V4??
    many thx in advance
    fj

    well normally i run using a dual output, where the external monitor is a VGA switcher or a video mixer. i run the video mixing software on my desktop monitor and the second monitor is the video mixed output.
    up to now i have only used DVI to VGA and it always worked. but i just picked up a better mixer and its inputs are composite. so i bought the DVI to comp adapters. as stated the MBP sees the V4 immediately. the G5 screen flashes but there is no detection.

  • Video Mixing Renderer, xvid

    Hi all,
    I've posted this on a forum which handles the product that I speak of below, but they recommend either updating the drivers for my video card, or getting a new video card.  I figured since I was getting the same error message on two separate machines with drastically different hardware configs, there must be some sort of incompatibility somewhere.  Hopefully someone here, who knows Windows and/or Boot Camp or virtualization can help.  The following is the post which I submitted on their forum:
    "Just got a computrainer 1 week ago- very nice machine! I'm a Mac user, and I'm running the CS and 3D software via VMWare Fusion (Windows XP, but I also have Windows 7), and also Boot Camp (with Windows 7, just to see if it worked). The software works fine with all of the listed methods. My laptop is a late 2009 MacBook Pro with an Nvidia graphics card, 512MB memory on the card.
    I recently downloaded the test version of the interactive video software to try it out. I keep getting a 'Video Mixing Renderer' error upon launching. I've adjusted all settings to numerous configurations with no luck. Same error with VMWare and Boot Camp. Just to make sure it wasn't my laptop, I installed the trial software on my Mac Pro (Dual Core Xeon, 8 GB RAM, ATI Radeon card with 1 GB memory), again adjusting all settings both within VMWare and within Windows XP- same error. I saw on this forum that someone with an iMac was successful in getting the video trial to work. Any suggestions?"
    John

    Mea Culpa- I ddin't know that I had to 'update' my video card drivers under Boot Camp (I assumed that the latest drivers would already be installed under Windows 7).  This also fixed the minidisplay port to HDMI issue that I was having (I posted on another area here).  Hope this helps anyone who may be having an issue with this.
    John

  • Capturing live from a video mixer

    We video our church services and want to make weekly DVDs of them. We have been using Final Cut Express with mixed success, but are about ready to switch to iMovie HD for several reasons.
    The question is, can we capture live video from the video mixer (mixing two cameras and one computer to a single signal) to our hard drive using iMovie HD? If so, how.
    Many thanks!
    Pastor Ron Heffield (macfiveo)

    First of all, if you're shooting either normal (4x3) DV or 'widescreen' DV, you'll have to select the appropriate format when you start a New Project. (..See items 6 and 7, and the accompanying pics, in my post here..)
    So when you slide the little onscreen selector from the "scissors" icon to the "camcorder" icon, and then click on the camcorder icon itself to choose the name of your mixer it may show "DV-VCR" or some other device name, as it's unlikely to know the exact name of your mixer. If no name is showing, and the iMovie screen says "No Camera Connected", just quit from iMovie and then restart iMovie.
    You should then see the live feed, and then just click on 'Import'.
    Alternatively, instead of importing with iMovie, you might try downloading and using BTV. You can then edit that captured material with iMovie.
    [..P.S: I don't think BTV, or BTV Pro, is a "universal" application, so it should work OK with your PowerPC Mac(s), but maybe not with an Intel-based Mac..]

  • Hardware or software based menu encoding?

    Under DVDSP preferences, under Menu options, how do I know which is preferable, hardware or software based encoding. Can someone please explain the difference?
    Thank you.

    Pamela:
    how do I know which is preferable, hardware or software based encoding.
    That depends on your graphic board (GPU) configuration. If you have a slow/old GPU board, you better start using software based and check results. Ussually that must work fine.
    Under certain combinations of FCS + OS + GPU, changing from one to the enother settings have solved some weird encoding issues (missing fonts, images, ...) to some users.
    But remember that those settings only affect Menu elements encoding, not your video tracks encoding.
    Hope that helps !
      Alberto

  • Video mixer with effect

    im looking into  Video mixer units.
    I would like to know which one would work with Pr?  I d like to set up studio,  Help! Thanks   anyone of you use video mixer unit for your video editing?

    If your budget is low, I'd highly recommend this video mixer. As shoot mentioned though the product you listed isn't a video mixer.
    http://www.bhphotovideo.com/c/product/766069-REG/Blackmagic_Design_SWATEM1ME_ATEM_1_M_E_Pr oduction.html
    I don't know of any switcher at this price point that will match up with this choice, it's software controlled but for the price you can't beat it IMO.   It has a built in audio mixer, several keyers etc. It also has several AUX outputs, as well as many other features.
    This switcher is also a good option however it doesnt' have as many keys or inputs and it also strips the audio on input of any siginal. Which is kind of deal breaker if you want to mix audio without a mixer. It also has no analog audio inputs.
    http://www.bhphotovideo.com/c/product/766072-REG/Blackmagic_Design_SWATEMTVSTU_ATEM_Televi sion_Studio_Production.html
    However from what you've said it doesn't sound like you want a video mixer.

  • Software Based Waveform Monitors

    I would like to know if anybody out there knows if there is a software based waveform monitor available like the "Serious Magic DV Rack 2" which is sold by Adobe and only PC based. I don't necessarily want to have to be running FCP in order to use it, all I want to do is get a waveform and vectorscope up on the Powerbook I use on location.

    I've used Videoscope and it's ok. Though it's not a piece of hardware, either. And it gets confused sometimes when FCP or Quicktime is open. So if you want to use the same computer to capture the video, you have to make your measurements, shut it down, and then open up whatever you're using to capture. I admit to only using it as the free tryout, so maybe this gets fixed when you buy
    $30 after the trial.
    http://www.versiontracker.com/dyn/moreinfo/macosx/4749

  • How to watch flash based videos without adobe flash installed using Safari

    How do I watch flash based videos without adobe flash installed using Safari?

    Once you have Chrome installed, activate the Develop menu in Safari (go to Safari Preferences > Advanced > Show Develop Menu). You then will see under the Develop menu the Open Page With option and Chrome will be listed there.
    So each time you open a page with Safari requiring Flash, you use that menu option to open the same page in Chrome.

  • Will Imovie 08 allow me to edit video from a hard drive based video camera?

    I'm a new mac user, a recent convert from a PC. I love it!
    I've read and heard conflicting information about hard drive based video recorders. I currently use a tape system and it gets on my nerves. I never re-use the saved taped info and usually overwrite the tapes anyway.
    I would really like to buy a hard drive based recorder because I like the idea of not having to spend 2 hours importing a 2 hour video. But I've heard that on my new mac that I would not be able to edit the video once I've imported it. I've heard that marketing material reads that imovie "supports hdd video" but that this means it will import only, no editing.
    Where can I find out what is correct? Any advice?
    Thanks.

    Actually editing your imported content from a HDD camera is not a problem at all. Importing it in the first place seems to cause one or two problems for some, but providing you get a compatible camera you should have no problem at all. I have a Sony HDR-SR8 and have no problems at all with imovie, whichever camera you are considering just make sure it works with imovie. Post your choices on these forums and someone with the same camera will share their experience with you.

  • ANN: Half-hour webinars (free) -- Web-based videos in PDFs (Apr 18) / Metadata in PDFs (Apr 25)

    (free; no fluff, no hype, no nonsense; starting 9am PT)
    Integrating web-based videos in your PDFs
    (with FrameMaker-to-Acrobat TimeSavers + Multimedia Asst)
    Thursday, April 18
    https://www3.gotomeeting.com/register/954869454
    Metadata in PDFs authored with FrameMaker
    Thursday, April 25
    https://www3.gotomeeting.com/register/578895294
    Shlomo Perets
    MicroType, http://microtype.com
    FrameMaker/Acrobat/Captivate training & consulting * FrameMaker-to-Acrobat TimeSavers/Assistants

  • Web based videos (youtube etc) have no sound and then stops after 4 seconds

    When i try to play a video clip from any web site, the video plays with no sound for exactly 4 seconds, then it stops.
    I can 'scroll' the time line anywhere, and the video plays from that point for another 4 seconds -still without sound.
    Ive tried to upgrade to the lates version of flash player, and no difference.
    This aplies to all web based videos that uses a flash based video player.
    I'm using the Linux version of flash player on a Acer laptop with intel CPU and graphics, the computer runs Kubuntu Linux V11.10 Oneiric Ocelot kernel version 3.0.0-12
    Any ideas?

    Hi sorry for the delay in responding.
    I'm not using any client side code as far as I am aware.
    I think I should have said: Flash CS3 video Encoder, as I am
    running both Production Premium Creative Suite 3, and also CS3 Web
    Premium.
    All I did was convert some AVI files that went through
    Premiere Pro CS3 and After Affects etc, in Flash Video Encoder. I'm
    not doing any live streaming.
    THe FLVplackcomponent is the one generated in Dreamweaver
    CS3, I choose Insert / Flash Video and choose the Streaming
    options, I fill out the rtmp details ( I have another thread on an
    issue there as a firewall blocks some of the files and I cannot use
    rtmpt) and it works!!
    If you have a suggestion for a better workflow or precedure I
    would appreciate it.
    It is just this one FLV file that seems to do this. I have
    since chnaged this one file to Progressive and it plays fine.
    I hope this helps.
    These files are then placed in the applications folder in
    Flash Media Server 2.0 directory.
    This works fine

  • Need solid pro dj software for live mixing-any suggestions?

    Tried Traktor, PCDJ and Virtual DJ with my Dell-with good results-recently converted to the MacBook Pro and love it.
    PC gone bye bye! Need solid pro dj software for club mixing.
    Thanks,
    ps I saw Michael Dell recently at a Texas Rangers game....with a Mac! hee hee hee-I should have took a picture.

    Final Scratch
    http://www.stantondj.com/v2/fs/index.asp
    [update: except that I see it says not Mactel compatible at the moment]

  • Unable to view web-based videos

      For the past few days, I have been unable to view web-based videos with the exception of YouTube. I am running Windows 7, IE 10, and am using Flash Player ver 11.8.800.94. Have tried using Beta ver 11.8.800.115 with no change. I have run 2 different anti-virus/anti-malware programs, and nothing was found. Have un-installed/re-installed Flash Player several times, and still receive messages telling me I need to download Flash Player. My system shows that I am running Flash Player 32-bit, but no videos besides YouTube will play. have been in contact with Microsoft for assisstance, and have followed all their suggestions, but still no luck. I am down to rebooting my laptop from scratch but thought I would see if you might be able to assisst me first.Any suggestions?

    Check
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Adobe Flash and Flash based Video Players and the ps command

    OK, I have two v20z servers. I just reinstalled Solaris 08/07 on both of them. These are both Sunray servers. One of the servers is fully patched and has SRSS 4.0 installed and serving Sunrays just nicely. I just finished installing Solaris on the 2nd server.
    On the first one I'm not sure what whacked things, the patches or SRSS
    If I go to a site with a flash based video player like youtube, Firefox or Mozilla will freeze untill the video is fully streamed.
    Also on this server the "ps" command is super slow. I like to do ps -efa|grep whatever to find processes. This unbearably slow on this 1st server.
    On the 2nd server I haven't yet patched it or installed SRSS. I think though it's the patches and not SRSS
    On this server the Flash 7 that comes preinstalled works fine on streaming videos. It also works fine with Flash version 9,0,47,0. I even copied the 9,0,47,0 version of flash from the server that where flash is freezing, so it's not flash that is the problem I don't think.
    Normal flash animations work fine, it's just flash based streaming video players.
    Something after patching seems to have done this
    Anyone else have a really slow ps and flash that freezes the browser while watching videos?

    *** BUMP ***
    Really? No one else has experienced this? I can easily recreate the issue, but can't find any fix.

Maybe you are looking for