SOFTWARE CD WILL NOT LOAD ON NEW COMPUTER USING WINDOWS 7

IPOD NANO SOFTWARE CD WILL NOT LOAD TO NEW COMPUTER USING WINDOWS 7. ANY ADVICE PLEASE?

Software CD?  You shouldn't need to use that anymore.  You can download the latest version of iTunes from here.
http://www.apple.com/itunes/download/
B-rock

Similar Messages

  • HP3520 will not scan to new computer with windows 8.1

    Downloaded and ran hpp1W.exe but still no connection.   Printer connected just fine.... just can't scan

    Well that didn't really tell us anything.
    But we can't help you with your computer. We're just users, with no tech support resources. Expression Web is just a program, like any other; there's nothing special. You just have to install it after you download it.
    A horse walks into a bar. The bartender asks "Why the long face?" "Because I was born into servitude and when I die my hooves will be used to make glue." It was at this point that the bartender realized he would not be getting a tip.

  • Adobe Acrobat 9 Pro will not load on  new Windows 7 Home Ultimate PC

    Adobe Acrobat 9 Pro will not load on  new Windows 7 Home Ultimate PC

    When I double click on the AA9 icon to initiate installation, it whirls away for a while then asks if I want to allow "this program to make changes to his computer?"  I click Yes and it begins to process again for a few minutes.  Then it displays the following Invalid Unicode file error message...and simply stops processing or installing.  In that last process, it also reaches out for whatever reason and activates the magnifier tool in Windows.
    I have thought that perhaps upgrading to a higher version of Windows might help, but who knows for sure?
    P.S. – This is a brand new HP Pavilion dv6 series computer that is more than adequate to this task.
    Thanks for your interest in helping!
        b
    Bob Horton, MS
    972-786-6445
    [email protected]
    www.rshorton.com

  • Ipod will not sync to new computer

    I have setup itunes on my new computer. OS is Windows 7. My 80 GB ipod will not sync to this computer. Nothing happens at all. Any ideas?

    Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues

  • Email attachements will not load in New Email, but load in reply

    I create a new email, to a person in outlook office 365, It will not load and attachments or pictures. If that person sent a email, I can go to reply and attachments load not a  problem.   Only in new email it will not load.
    jack walsh

    Hi Jack,
    As S.Sengupta said, please submit a new case on Outlook support forum as they will be more professional on your issue:
    Outlook IT Pro Discussions
    http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.  Thank you for your understanding.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • I forgot my password and ipod will not sync with new computer

    I forgot my password and ipod will not sync with new computer

    You'll need to connect the iPod Touch to your iTunes library in recovery mode and restore it factory settings.  There is no other way.
    Here are instructions for getting your iPod touch into recovery mode.
    http://support.apple.com/kb/ht1808
    B-rock

  • Firefox will not open any new tabs since windows update

    I have windows 7 64, and recently, when windows automatically updated, my firefox will not open any new tabs, manually or when opening a link...

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.

  • Deactivated (signed-off) on old computer.  Still will not active on new computer, "maximum number of computers"

    Tried to load PSE13 on my new computer.  Said too many computers for that serial number.  Deactivated (signed-off) on old computer.  Still will not activate, same message.

    Are you waiting for Activation support? Because they're the only ones who can fix this. Don't waste time on regular support. If you aren't there already, go here:
    Activation & Deactivation Help
    And scroll down to "Still need help? Contact us" and work your way through the links there till you can start a chat session.

  • IPod will not sync to newer computer

    Friends,
    I have a perplexing problem. I am moving my computers around. I always move the faster one up to the office while the older one goes to another room. Currently I have the iPod synced to a MAC 450 GHz G4 computer. I wanted to move the iTunes and sync to my faster computer. ...I have a G4 dual 1GHz MDD. I inserted my pod into the dock and it requested that I sync to the iTunes new computer. This required that the iPod be erased. I have already moved the library to the new G4 1GHz via DVD discs as per the instructions for moving to a new computer. However, within about 4 minutes as it was writing the tunes to the ipod, a dialogue box popped up and said " Attempting to copy to the disk "my name" iPod failed. The Disk could not be read from or written to." I checked the iPod drive via disc utilities. Everything is fine. The iPod mounts with no problem. I even purchased music that the library disc is on ( I keep a separate drive for the library) every thing is good. I updated my OS (10.4.11 and the iTunes is 7.6.1 (9) For some odd reason my 1 Ghz MAC will not sync to the iPod. I then tried the ipod on the old G4 450 GHz and it re syncd...... no problem. Any suggestions ??? Trouble is .. in order to test it ..... you gotta see if it will write all your tunes.. I really want my 1 GHz to be the main "sync" one.
    Second problem, but not as serious... every time I insert my pod into the dock, BOTH MACs tell me that I should use 2.0 USB and connect the dock to the back of the computer. IT is connected to the back of the computer!!!!!
    Mike

    Did you download the ne iTunes?(i think its 11)
    If that's the case then you need to go to "music" and select that you want to sync your music.
    Hope that helps.

  • Bridge CS5 will not open on new computer

    I deactivated ps cs5 on my old computer and used my ps cs5 upgrade disk to install it on my new win 7 ultimate computer. It should be clean install but I did migrate many files from the old win xp computer with windows easy transfer. Bridge will not open and I can not find it listed in my programs. I tried to run my old cs4 upgrade disk and it shows that I have bridge cs4 installed even though I never installed ps cs4 on this machine. Is it possible that some old migrated files are now blocking bridge cs5 from opening? I tried to reset preferences by holding the ctrl key and clicking on bridge but nothing will open. Would this be solved by upgrading to CS6 or will I still have the same issue if bridge cs5 does not open? I tried to run the bridge cs5 update but it will not install. I do not get any error message at any time. Adobe support advisor found an unnamed error but can not recommend a solution.

    I ran the creative suite cleaner and removed all files from cs3, cs4. But they are still there listed in c>programfiles (x86)>adobe. I can see adobe bridge cs4 and adobe bridge cs5. when i run bridge.exe from adobe bridge cs5 folder it opens bridge cs5. but i cannot open bridge while ps cs5 is open. I can't seem to delete the cs4 files as it says i need administrator rights, which are somehow not available.
    Update: Somehow it did work, even though the cs4 program files are still there. I opened mini bridge from within cs5 and it said something to the effect that it needed to close cs4 bridge and use cs5, i clicked okay and my files were displayed in mini bridge cs5. I closed that and then clicked the bridge icon from within ps cs5 and bridge cs5 opened. I guess I changed the preferences somehow. Thanks for your answer and suggestion, which may well have been the solution or it led me to the correct step. The big point is that I avoided the big reinstall I dreaded after two days of getting cs5 set up with all plug-ins,etc installed. Thanks for your help!

  • Itunes will not open on new computer just purchased???? Im going crazy here

    I just purchased a new Gateway computer and I downloaded the new version of Itunes,,,, all of that went well... When I plug my ipod up and when It comes up on the menu bar and I try to open it...it opens a screen that shows My ipod in picture, the version of it, options it shows the capacity of gigs. etc. but it will not open the contents of the ipod so I can move songs around and downloaded new ones onto it....I hope this makes some since..Im lost ..Please help...

    Just hit the arrow of the lefthand side of the ipods name then select "Music" below the ipods name

  • My iPhone will not sync with new computer... old computer stolen!!

    I have a new 27" iMac and when I try to sync through iTunes it only prompts..'I will lose all data if I sync with current folder'
    Has Apple not thought about the fact if someone has a computer stolen they are unable to transfer old data to the new
    computer? This is frustrating... any help and direction would be great! Thanks in advance.

    The demo restrictions are shown here: http://www.wideanglesoftware.com/touchcopy/download.php

  • Lookout 6.1 will not load on my computer

    I am trying to upgrade To Lookout 6.1 and get a message that I need Microsoft Data Access Components 2.8 SP1 I downloaded 2.8 and Lookout still will not install. My machine will not download MDAC 2.81. I am currently running Lookout 4.5 on my computer which is Windows XP Home Edition Version 2 Service Pack 1. What do i need to be able to load Lookout 6.1?

    Maybe you need XP service pack 2.
    Ryan Shi
    National Instruments

  • NEW COMPUTER USING WINDOWS 7 WILL NOT WAKE UP FROM SLEEP MODE. I HAVE TO MANUALLY TURN IT OFF AND BACK ON.

    New laptop with Windows 7 does not wake up from SLEEP MODE.  I have moved the computer, moved the cursor, pushed every key on the keyboard, moved the space bar but nothing wakes it up.  I always have to manually turn the computer off and then
    turn it on again.  I have searched the FORUM but don't see anyone having my problem.  I have searched under SLEEP MODE in GETTING STARTED WITH WINDOWS 7 but I don't find where they address the different modes.  Any suggestions?

    Hi,  I would suggest you to check allow this device to wake the computer have a tick mark.
     Here are the steps:
    1. Click Start, type Device manager in the search box.
    2. Go to Device manager.
    3. Click on keyboard, it will display your keyboard, right click and go to properties.
    4. Select Power management.
    5. Check Allow this device to wake the computer.
    Follow the same procedure for mouse, restart the computer and check if it works properly.
    I also suggest you to update your display drivers, you can logon to the manufacturers website and download the latest drivers and install.
    For more information:
     http://support.microsoft.com/kb/266283
    Also I suggest you to run the Power troubleshooter to adjust your computer's power settings, and check if it works properly.
    Here are the steps:
    1. Open the Power troubleshooter by clicking the Start button, and then clicking Control Panel.
    2. In the search box, type troubleshooter, and then click Troubleshooting.
    3. Under System and Security, click Improve power usage.
    If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    For more information, logon to:
    http://windows.microsoft.com/en-US/windows7/Open-the-Power-troubleshooter
    http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions
    If the issue persists, please collect the Power Efficiency Report for further analysis.
    Guided Help: Get a detailed Power Efficiency Diagnostics Report for your computer in
    Windows 7
    Regards,
    Leo  
    Huang
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Firefox will open but not load any new tabs or windows after a set amount of time.

    After about a day of my computer running, Firefox will stop being able to browse the web at all. Any attempt to open a new window, tab, or refresh an old tab will result in the program not doing anything, or opening a new window/tab with (Untitled) in it. The window cannot be navigated away from this, and will not refresh. Closing Firefox does not solve the problem, nor does ending the process. The only way to restore Firefox's functionality is to restart my machine.

    hello spitcher, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
    in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Maybe you are looking for