Software Center displays no found items under all the tabs

Wanna ask, I often faced issues where the software center on my client machines shows no items found. I have double checked the agent, and it is installed properly (I can see under Actions tab got 11 actions and correctly pointing to the mgmt point). I have
also run the mplist and mpcert, and able to display all the MP's. I leave it for few days, kept forcing to run machine policy actions a few times, but still it displays no item found in my software center... Im assuming that it is not able to communicate
with the MP... Whats the log file to see if the agent is correctly communicating with the mgmt. point and able to get the latest policy?

In the locationservices.log whether the client is able to find the correct MP? Is the client is approved? 80004005 is unspecified error. We should have more details to help you. In the above screenshot client is requesting for the policies but not sure whether
the client received the policy or not.
Also, the following tool Deployment Monitoring tool may also help http://anoopcnair.com/2012/07/11/sccm-configmgr-2012-how-to-use-deployment-monitoring-tool/
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Similar Messages

When I click on the button to download the new IOS software, I get a message saying that all the items on my iTouch will be removed. Will I have to reload everything after updating the software?

When I click on the button to download the new IOS software, I get a message saying that all the items on my iTouch will be removed. Will I have to reload everything after updating the software? Because I had to have my hard drive wiped a while back, I have items on my iTouch that are not in my iTunes. Is there a way to copy everything on the iTouch into iTunes, if necessary, before I load the new software?

It is possible to transfer purchases from your iPod back into iTunes before updating the OS. If you had any CDs from your personal collection, these you have to put back into iTunes manually. Hope this helps you & good luck!

I can not publish my software I get "_An error occurred while signing: Failed to sign bin\Debug\app.publish\\setup.exe. SignTool Error: No certificates were found that met all the given criteria."

Error 2
An error occurred while signing: Failed to sign bin\Debug\app.publish\\setup.exe. SignTool Error: No certificates were found that met all the given criteria.
Yesterday I could publish, today no code changes, but I get the above error.
Help

Hi El-sid,
So glad that you have solved your issue, and thanks for your sharing.
Have a nice day.
Best Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling

SignTool Error: No certificates were found that met all the given criteria

I have a project which was developed with VS2010.
I tried rebuild this project with VS2013 Professional and I got the error messages as indicated in the subject.
What is this error? Why I got this error?
Hyung-Ho Kim

Hi Kim,
As you said that it is the VS2010 project, so it worked well in VS2010, am I right? If so, which kind of project did you create?
>>SignTool Error: No certificates were found that met all the given criteria.
I did some research about it, it seems that it is related to the setup project.https://social.msdn.microsoft.com/Forums/en-US/143a914b-1c45-467f-9827-d38b95db11a1/signtool-error-no-certificate-were-found-that-met-all-the-given-criteria?forum=winformssetup
Is it the Setup and Deployment project with the InstallShield tool?
If so, as far as I know we didn't support this tool in VS2013 IDE now, but you could post this issue to this forum here:
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

It shows the log sequence not found error while all the log seqences exist?

Why the database shows the log sequence not found error while all the log seqences exist?
SQL> select*from v$log_history;
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
1 657328345 1 1 519368 13-JUN-08 543434
519368 13-JUN-08
2 657370849 1 2 543434 13-JUN-08 567705
519368 13-JUN-08
3 657373012 1 3 567705 14-JUN-08 570408
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
4 657373039 1 4 570408 14-JUN-08 570464
519368 13-JUN-08
5 657374623 1 5 570464 14-JUN-08 573505
519368 13-JUN-08
6 657375015 1 6 573505 14-JUN-08 573856
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
7 657376537 1 1 570465 14-JUN-08 573543
570465 14-JUN-08
8 657377084 1 2 573543 14-JUN-08 575109
570465 14-JUN-08
9 657377094 1 3 575109 14-JUN-08 575114
570465 14-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
10 657377103 1 4 575114 14-JUN-08 575121
570465 14-JUN-08
11 657377106 1 5 575121 14-JUN-08 575123
570465 14-JUN-08
11 rows selected.
RMAN> flashback database to sequence=10 thread=1;
Starting flashback at 14-JUN-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=155 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of flashback command at 06/14/2008 13:03:15
RMAN-20206: log sequence not found in the repository

Apart from the output being hardly readable (please refer to the FAQ in the right upper hand corner how to post output), I don't see any sequence 10.
You seem to mistake the column recid for the sequence column.
The sequences are listed in -not surprisingly- the sequence# column.
Sybrand Bakker
Senior Oracle DBA

Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

Why in Ai CC 2014, when I use a pathfinder tool on two objects, their anchor points snap slightly off from where they were? I'm looking under all the snap to options under VIEW & cannot find the culprit. Please help!

You're welcome.
There are a couple of issues connected to it:
http://www.vektorgarten.de/problems-align-to-pixel-grid.html
I don't think that list is complete

HT4623 The software update option is not available under my general tab...now what

The software update option is not available under my general tab...now what

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases - you may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Send email of created item to all the staff

Hi SharePoint Designers,
I have simple workflow to send email to staff once the item is created.
I want to have in the body of the email as the following:
the title of the created item , the description entered for it, and the url link that open in a browser
what should be the fields of them?
thanks.

Hi,
According to your post, my understanding is that you wanted to send email of created item to all the staff.
It will be better if you can explain ‘the description entered’ more detail.
To get the url link in the email body, we can use [%Workflow Context:Current Item URL%].
In SharePoint Workflow 2010 platform, the reslut is
http://sitename/Lists/ListA/DispForm.aspx?ID=1
However, in SharePoint Workflow 2013 platform, the reslut is Lists/ListA/1_.000 .
I recommend to create workflow using SharePoint Workflow 2010 platform.
Or call the SharePoint 2010 workflow by using Start a list/site workflow action inside SharePoint 2013 workflow.
In the SharePoint 2010 workflow, we can add action as below and start the workflow automatically when an item is created.
Thank you for your undertstanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Often when Firefox is closed and reopened ALL the tabs and tab groups are missising. FIX!!!!

For reasons that are unclear to me I sometimes close Firefox and later re-open it. In some cases ALL the tabs and tab groups are gone. Today it opened in MSN.com and ALL tabs were gone. I put a lot of pages on these and have NO WAY to find them all again. If this continues and you cannot give me a way to recall them I simply will have to go to another browser. It always happens when I need them most and don't have time to even track down one. It completely upsets my day, week, month whatever!!!.
Is there a way to get them back? Someone asked a similar question and was never given a useful answer.

I've begun having this problem as well. Reviewing the above, I seen no errors that I' making. A few weeks ago, without being aware of an update to Firefox, it began behaving differently than it has for years. I've always had it set to open to an empty tab, now it often opens to the 'Firefox Home Page' (which I've never used)... this despite resetting my opening page to "Show my windows and tabs from last time" (upon troubleshooting the 'home page issue' I found that the opening page had reset to FF Home somehow. I store a lot of pages in tab groups and having them disappear is a major bummer since they're news articles I'm waiting to copy.
Also... I run CCleaner weekly and I know that will erase the group tabs I've stored so before running it I have to store those URL's another way. Does anyone know what I can uncheck in CCleaner to keep those tabs?
Thanks.

How can i print all the tab pages not just the first page (tab)

how can i print all the tab pages not just the first page (tab)

You would need to do this programmatically. Here's one way:
Attachments:
Example_VI_BD6.png ‏3 KB

Can you print all the tab control's contents and include the tabs?

We are trying to generate a report that includes the contents of a tab control (graphs, text). Using the Append Control Image to Report.vi, we are only able to print out the active tab and the tab is cut off of the image. How can we generate reports that include all the tab pages and their contents and include the labeling tabs?
Thanks in advance.
Jim

I do have a workaround for makinging the prints but it looks like some sort of cropped screensave that cuts off the tabs. In my sample I was printing out 3 of the tab controls and you can see there are three by the cut off tabs. Is there a setting to allow for more of the graph and its surroundings to be "captured"?
Attachments:
Document.pdf ‏53 KB
Document (2).pdf ‏51 KB
Document (3) (2).pdf ‏58 KB

HI,I am unable to see all the tabs in ACC, getting the following error

I am unable to see all the tabs in ACC, getting the following error.
ERROR [ComponentAgent] Request for URL:
http://sathya-PC:8080/dyn/init-session did not return a valid session.
Please check your settings for siteHttpServerName, siteHttpServerPort,
webApplicationPrefix and initSessionURL for component
/atg/devtools/DevSessionManager/_2/atg/devtools/ComponentAgent
serverport : 8860
servername : localhost
Note:I included DCS in Manifest and Run the DCS in SQL
Please Help me out from this issue
Thanks

Verify and chage if required.
Ports are configure at /atg/dynamo/Configuration component,
httpPort , httpsPort , drpPort , fileDeploymentPort , rmiPort , fileSychronizationDeploymentPort , adminPort , siteHttpServerPort
Noramly :
siteHttpServerPort and adminPort: app server port
Thanks,
Nitin.

Firefox closes all the tabs on its own unexpectedly and we have to start everything afresh.why does this happen?

our browser closes on its own unexpectedly, all the tabs and everything closes down (esp when playing games in facebook), we have to start everything afresh, just worried if this is not a sign of crash because we haven't received any crash report and if so how can we prevent any further damage.

Your user agent is '''corrupted by Fast Browser Search (FBSMTWB) '''and that identifies you as '''Firefox/3.5.5'''
see your user agent:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.5) Gecko/20091102 '''Firefox/3.5.5''' GTB5 (.NET CLR 3.5.30729) '''FBSMTWB''' TTLSkins
you must [https://support.mozilla.org/en-US/kb/Websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent reset user agent]
see also these pages and threads about Fast Browser Search (FBSMTWB in the user agent).
http://help.fastbrowsersearch.com/
http://www.pccybertek.com/2009/05/remove-fast-browser-search
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

My SCCM Client does not show all the tabs in the Config manager control pannel

Hi All,
I have a issue Post pushing a installation on a client. It was installed successfully. But i do not get all the options in the control panel as per the below screenshot.
I reinstalled the client via push from the console during the re installation i got the below errors as per the below screenshot.
Can any one tell me why is this issue happening.
I get all the options in my SCCM DP / Site server control panel but not in the client.
I got the DP role re installed, As well as well as checked the DNS. Iam able to ping from my client machine to the Site server / DP via ip as well as FQDN.
Can any one please help?
Gautam.75801

Got the solution.
1. Reconfigure the boundary and boundary groups and rebooted the SCCM DP / Site server.
2. Turn firewall off in the client and uninstall the SCCM setup in the client and Rebooted the client and re install the client via push method from console
3. Turned off the UAC in the client machine.
Now i am able to get all the tabs s well as Console shows the server as a client.
Gautam.75801

Software Center displays no found items under all the tabs

Similar Messages

Maybe you are looking for