Software Center "reinstall" option
I deployed two items - an Application and a Package to my test client.
After successful install I noticed that the PACKAGE has an option for REINSTALL but the APPLICATION only has an option for UNINSTALL (greyed out if the deployment is mandatory).
Does this sound correct, by design and match the experience of others?
What if I wanted to do an MSI Repair of the application but cannot do an Uninstall / Reinstall via software center because it is greyed out - I assume the using Add Remove programs is the suggested approach?
Thanks Jeff, that is what I figured - thanks for the second set of eyes.
The only issue is with packages you can do a reinstall in case the package becomes corrupt since there is a reinstall option. With an application there is no reinstall option so one must go to AR Programs and select "repair" or "uninstall
/ reinstall" and that requires admin rights (our users are not local admins).
Regardless, thanks for the confirmation.
Similar Messages
-
Conundrum - PXE boot fails vs. "reinstall OS from software center" succeeds
Hi All.
I am facing a bit of a conundrum..
In our offices I am seeing some strange behaviour when trying to PXE boot into a TS to reinstall or install OS.
If I use F12/PXE boot then the deployment fails during OSD.
If I take a client (the same client as I tried pxe booting with) that is fully installed and reinstall OS via software center then the deployment completes.
Any ideas what could be wrong?
Kindest regards, MartinDaniel:
Clients are both laptops & desktops.
I "feels" like it's the network that's acting up but I really can't see where.
PXE boot works.. it's not until it tries to apply the OS...
whether it's a timeout or what it is I cannot say..
Gerry: After all will you be likely to rebuild your entire estate in-situ any time soon?
You know... we are actually On the verge" of upgrading & Streamlining our entire network infrastructure..
But I'd still love to solve the problem..
We never had this issue when we only had MDT as deployment tool.
it's not until sccm came into the picture that this issue has arisen.
Kindest regards, Martin -
Show Options in Software Center
Hi,
in the Software Center the default setting is Show "All". Is there a possibility to change this default to "Applications" or something else?
Thanks ExpertsNo.
Torsten Meringer | http://www.mssccmfaq.de -
I have some scenarios where I want to keep older or multiple versions of an application around in the Application Catalog website. The problem is when I deploy a script to remove one of these applications after removal it starts to appear under "Available
Software" in the Software Center. Our users have noticed this and discovered that they can go there, select the application and reinstall it. I need to find a way to prevent this. Is there some sort of setting I can enable to prevent certain applications
from showing up under "Available Software" but still have them listed in the Application Catalog Website?I show in the SDK about properties passed to the Software Center that deal with Applications but nothing on how to interact with it directly in dealing with the Check box for "Show Optional Software".
You can always see if there is a captured regentry when you click it. I don't know if this setting is wiped out when you close the SC. If so you could create something to create the key to force the check box. Sorry, maybe someone will
have a better answer for you.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com
Thanks for responding again Matthew. Yeah I googled around and got nowhere. I did find a thread here that touched on it where Torsten Meringer responded and seemed to indicate that it could not be done. I find that hard to believe (where there's a will there’s
a way right?). I did tag the Software Center with a registry watcher on my stet VM and tried unchecking that box. Got nothing so wherever the setting resides it does not appear to be in the registry. Very frustrating to have the solution staring me right in
the face and being unable to do anything about it. Hopefully someone who has a working method will see this thread and respond. Until then I guess I’ll keep digging.
Side note – I’ve worked in Oil and Gas now for 10 years. Awesome to have an admin from Schlumberger respond to my post. We energy people have to stick together right? ;) -
Software Center Stuck Installing
If a program has started running and is stuck at installing how can I stop it so that I can click on the Reinstall button? I have restarted SMS Agent Host and didn't help. I'd rather not remove the client from the collection and then re-add as
this is a workaround that may allow me to click on reinstall. I'd also prefer to not restart the computer.
What are the other options to reset this deployment back to status of Failed in Software Center?Hi,
What value have you set Maximum runtime to? if not configured that is 12 hours. Restarting the computer will solve it, most likely you have a setup process running as well that is causing the Software Center to wait for the installation to finish, killing
that process either with TaskKill or Task Manager should do the trick..
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Ovi suite doesn't provide "reinstall" option, Symb...
Hi guys
I am having certain issues with my Nokia N8 device, which was once bricked and the motherboard was changed by the service center. The product type is RM-596 and the product code is 059B288. Though I managed to install Symbian Anna without any troubles as soon as the update was made available, wondering with one particular annoyance!
I cannot see the "reinstall" option for my device after an update check using OVI Suite, when both my E7, E72 devices provide me the "reinstall" option. Could be this because of the Product Code? If yes, then how I could do a fresh firmware update on my N8?
Regards,@n80kwt
Not clear from your post whether Symbian Anna upgrade was via FOTA or Ovi Suite, as you usually need to have installed an update via this method (Ovi Suite) previously for the re-install existing software option to be revealed.
Happy to have helped forum with a Support Ratio = 42.5 -
Getting "Error: 0x80070654" when trying to install SCCM 2012 R2 Console from Software Center
What I did:
Created a Package Source share on the Site Server
Gave the Package Source Share the following Share permissions: SCCM Admins: Full Control, Domain Computers: Full Control, Local Admins: Full Control.
Copied the "Program Files\Microsoft Configuration Manager\tools\ConsoleSetup" folder to my package source (Since the Package Source is actually on the site server, I just copied the ConsoleSetup folder to it that is on the same drive)
Created a package and a Standard Program
Command line: ConsoleSetup.exe
I deploy it to my collection
Run Machine Policy and Reevaluation on my Right Click Tools
Go to one of my clients and open up Software Center and click the Install button
It fails with ""Error: 0x80070654"
I open up execmgr.log on the client using CMTrace and I use the error lookup tool and it shows that the 0x80070654 error is "This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer
package"
I also see a red highlighted line in the execmgr.log file with the following entry: "Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020"
I can run ConsoleSetup.exe using a command line to the package source.
Execmgr.log Contents
Policy arrived for parent package PRI00013 program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094048.938000+000";
MachineName = "My Computer";
ProcessID = 1548;
SiteCode = "PRI";
ThreadID = 3336;
execmgr
7/31/2014 2:40:48 AM 3336 (0x0D08)
Raising client SDK event for class NULL, instance NULL, actionType 6l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3568 (0x0DF0)
Validating chain of dependent programs for package PRI00013 optional program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Validating package PRI00013 program SCCM 2012 R2 Management Console in the chain. The content request ID is {00000000-0000-0000-0000-000000000000}
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Creating an optional execution request for package PRI00013 program SCCM 2012 R2 Management Console
execmgr
7/31/2014 2:41:04 AM 4612 (0x1204)
Requesting content from CAS for package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Successfully created a content request handle {CBABEBB0-D019-4421-8B2E-47ABF90A925F} for the package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094105.334000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
PackageVersion = "1";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4612;
execmgr
7/31/2014 2:41:05 AM 4612 (0x1204)
Successfully raised SoftDistWaitingContentEvent event for program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from NotExist to WaitingContent
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4260 (0x10A4)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: OnContentAvailable
execmgr
7/31/2014 2:41:10 AM 4756 (0x1294)
[{CBABEBB0-D019-4421-8B2E-47ABF90A925F}]: Content Version 1 is available for advert , pkg: PRI00013, program SCCM 2012 R2 Management Console.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Request a MTC task for execution request of package PRI00013, program SCCM 2012 R2 Management Console with request id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from WaitingContent to Ready
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 0 to 4
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: RemoveNotification
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC signaled SWD execution request with program id: SCCM 2012 R2 Management Console, package id: PRI00013 for execution.
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Sending ack to MTC for task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program ConsoleSetup.exe in Admin context
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from Ready to NotifyExecution
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Checking content location C:\Windows\ccmcache\eo for use
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Successfully selected content location C:\Windows\ccmcache\eo
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program as a script execmgr
7/31/2014 2:41:10 AM 4328 (0x10E8)
Successfully prepared command line "C:\Windows\ccmcache\eo\ConsoleSetup.exe"
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Command line = "C:\Windows\ccmcache\eo\ConsoleSetup.exe", Working Directory = C:\Windows\ccmcache\eo\
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Running "C:\Windows\ccmcache\eo\ConsoleSetup.exe" with 32bitLauncher
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Created Process for the passed command line
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
CommandLine = "\"C:\\Windows\\ccmcache\\eo\\ConsoleSetup.exe\"";
DateTime = "20140731094111.028000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4328;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\eo\\";
execmgr
7/31/2014 2:41:11 AM 4328 (0x10E8)
Raised Program Started Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 4 to 5
execmgr 7/31/2014 2:41:11 AM
4612 (0x1204)
Program exit code -2147023276 execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Looking for MIF file to get program status execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094111.506000+000";
ExitCode = "-2147023276";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4756;
UserContext = "NT AUTHORITY\\SYSTEM";
execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Raised Program Error Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Execution is complete for program SCCM 2012 R2 Management Console. The exit code is -2147023276, the execution status is FailureNonRetry
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
MTC task with id: {C9942D47-8A99-4363-AE69-A6F813336239} deleted successfully.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
This execution request does not have a corresponding task in MTC.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : END Event
execmgr 7/31/2014 5:00:00 AM
2928 (0x0B70)
ThanksCool, mate it is then.
Yeah it either changed or there is a typo.
I re-created everything and I still get that same 0x80070654 error.
This is really frustrating
Anyway, here is what I see in the AppEnforce.log:
+++ Starting Install enforcement for App DT "SCCM 2012 R2 Management Console" ApplicationDeliveryType - ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision - 1, ContentPath - C:\Windows\ccmcache\ev,
Execution Context - System AppEnforce
7/31/2014 11:27:30 PM 4256 (0x10A0)
A user is logged on to the system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Performing detection of app deployment type SCCM 2012 R2 Management Console(ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, revision 1) for system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
+++ Application not discovered. [AppDT Id: ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision: 1]
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
App enforcement environment:
Context: Machine
Command line: consolesetup.exe /q TargetDir="%ProgramFiles%\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 2
Content path: C:\Windows\ccmcache\ev
Working directory:
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared working directory: C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Executing Command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server with user context
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Working directory C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Post install behavior is BasedOnExitCode
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Waiting for process 2792 to finish. Timeout = 120 minutes.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Process 2792 terminated with exitcode: 2147944020
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Looking for exit code -2147023276 in exit codes table...
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Unmatched exit code (2147944020) is considered an execution failure.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
++++++ App enforcement completed (0 seconds) for App DT "SCCM 2012 R2 Management Console" [ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef], Revision: 1, User SID: ] ++++++
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0) -
Windows 8.1 Software Center Issue
In my development environment I have two clients, one is Windows 7 SP1 and the other is Windows 8.1.
I have successfully deployed a required application to both clients. Now I am testing deploying an available application to both clients. The application is being deployed to a user group collection that separate users for each client are a member of.
The Windows 7 client can see the application in the Software Center and can successfully install it. However the Windows 8.1 client does not list anything in the Software Center but the application does show up in the application catalog when the link on
the Software Center is clicked.
I have been through numerous sites and tried removing the SCCM client and reinstalling it. I have made sure the client isn't still in provisioning mode.
Does anyone have any other thoughts or ideas as to what may be going on with the 8.1 client?Hi,
Have you checked log about software center? Such as SCClient_<domain>@<username>_1.log, SoftwareCenterSystemTasks.log and SoftwareCatalogUpdateEndpoint.log.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
A custom task sequence to install software is always listed as Operating System on Software Center
Hello,
I have built several custom task sequences to install software in SCCM 2012 R2 CU1 environment, but the type of task sequence is always listed as Operating System on the Software Center. I tried creating a simple task sequence (Task Sequence 1) that contains
a single restart computer step only and tried deploying it to a test machine. This task sequence is also listed as Operating System. This task sequence fails because this is not the one for OS install and I do not specify a boot image for this task sequence.
All task sequences that I have created in SCCM 2012 RTM environment are working as expected. All task sequences that I create in SCCM 2012 R2 CU1 are listed as Operating System regardless of its actual type (I upgraded my environment from CM2012 RTM to CM2012
R2 CU1 last month).
Here is a test task sequence that contains a single step of restart computer. This is not Operating System install but listed as Operating System. Any thoughts?If you use OSD steps in your task sequence you will get this prompt.
http://social.technet.microsoft.com/Forums/en-US/3eb7569c-0b5a-4b40-86c3-d4f092c70aca/task-sequence-warning?forum=configmanagerosd
Per Mikko:
Using any of following steps (and possibly others as well, I did not check all of them) will change the task sequence type from generic to OSD:
General - Join Domain or Workgroup
General - Restart Computer (Only "The boot image assigned to this task sequence" option)
Disks - Format and Partition Disk
User State - Request State Store
User State - Release State Store
Images - Apply Operating System Image
Images - Setup Windows and ConfigMgr
Daniel Ratliff | http://www.PotentEngineer.com -
Software Center shows "No items found"
Hi,
Software Center is not updating the applications and shows "No items found". It is not showing the organization name too(instead IT Organization is displayed). Found that Configuration Manager in Control Panel shows only
"Machine policy & Retrieval cycle and User policy cycle".
Workaround: Tried to clean uninstall SCCM 2012 client and reinstalled it and initiated Machine policy & Retrieval cycle. Check after sometime but no luck.
Please guide how to work on this issue.
Thanks & Regards,
Lorin Jovita
Regards, Lorin DavisHi Torsten,
Found the below in entries in the log files:
ClientIDManagerStartup.log
failed to send registration request message. error: 0x87d00231
LocationServices.log
Failed to send management point list Location Request Message
ccmmessaging.log
Post to
http://xxxxxxxxxxx.xxx.local/ccm_system_windowsauth/request failed with 0x87d00231.
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7
From ClientLocation.g found that the client is assigned correctly.
Thanks & Regards,
Lorin Jovita
Regards, Lorin Davis -
HP Printer Assistant Software Missing Scan Option on DeskJet 2542
I have installed the Printer Assistant Software on both an HP Desktop and a Lenovo Laptop. I have two HP DeskJet 2542 Printers in two different physical loactions that I connect to with the Laptop. On the Desktop computer the install of the software has a SCAN function Button that launches a SCAN mode where I can scan files to PDF, etc. That option does not appear on the Laptop. I have re-installed the software on the Laptop and still cannot get that function. Why? Makes no sense that it woud install and show up on the Descktop computer, but not the laptop. Is it because the Desktop is HP and the laptop is Lenovo? How can I get the SCAN button and functionality in the Printer Assitant software on the Laptop???
This question was solved.
View Solution.Hi.
Uninstall the software, then reinstall its latest version from the HP site and not from the supplied CD:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-117577-4&cc=us&dlc=en&lc=en...
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
I am starting to test software center and when I publish Packages I do not get the option for Categories or the option to choose if it requires Approval or not.
Is this possible or to get those features do you have to create applications?How can you building and application tell it to import reg keys or set reg keys? I do this now via the package and batch file to import the reg keys.
Same way. There's nothing really different about a deployment type from this perspective -- it's a command-line which can be a batch file.
Also how can you or can you tell an application before it installs it needs to uninstall something first? Example I want when Office 2013 is installed with lync 2013 to uninstall Lync 2010?
That depends upon the application itself. In this case, you should be able to use Office setup as it will automatically uninstall previous versions of Office apps.
Jason | http://blog.configmgrftw.com -
Running Task Sequence from Software Center failed after rebooting to WinPE (0x8022001B)
Hi all
I have created a task sequence to refresh client OS to windows 8.1 x64. I ran this task sequence in software center on a windows 7 client, everything went well without any fails.
But when I ran the same ts again after it refreshed to Windows 8.1, it failed immediately after rebooted to WinPE. It shows a warning with error code 0x8022001B.
My test environment: SCCM 2012 R2 (Windows Server 2012 R2). Client Device: Lenovo L430
Any suggestions? Thanks in advance!
SMSTS.log file shows below:
<![LOG[Configuring 1 of 3 network adapters]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="netsettings.cpp:186">
<![LOG[Configuring DHCP]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:417">
<![LOG[DNS suffix: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:428">
<![LOG[DNS server search order: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:437">
<![LOG[DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:444">
<![LOG[Full DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:452">
<![LOG[Permitted IP protocols: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:457">
<![LOG[Permitted TCP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:461">
<![LOG[Permitted UDP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:465">
<![LOG[Tcpip Netbios options: 0]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:474">
<![LOG[Enable WINS: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:480">
<![LOG[WINS server(s): ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:489">
<![LOG[MAC address: a4:17:31:f3:e4:28]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:503">
<![LOG[Adapter index: 0]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:512">
<![LOG[Adapter name: WLAN]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:516">
<![LOG[Getting namespace "Microsoft-Windows-TCPIP" for architecture "amd64"]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="smiinterface.cpp:222">
<![LOG[Added list item with key value 'a4-17-31-f3-e4-28']LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="smiinterface.cpp:441">
<![LOG[Configuring 2 of 3 network adapters]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="netsettings.cpp:186">
<![LOG[Configuring DHCP]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:417">
<![LOG[DNS suffix: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:428">
<![LOG[DNS server search order: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:437">
<![LOG[DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:444">
<![LOG[Full DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:452">
<![LOG[Permitted IP protocols: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:457">
<![LOG[Permitted TCP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:461">
<![LOG[Permitted UDP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:465">
<![LOG[Tcpip Netbios options: 0]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:474">
<![LOG[Enable WINS: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:480">
<![LOG[WINS server(s): ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:489">
<![LOG[MAC address: a4:17:31:f3:e4:28]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:503">
<![LOG[Adapter index: 1]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:512">
<![LOG[Adapter name: WLAN]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:516">
<![LOG[spItem->CreateListElement( var, &spChildItem ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\smiinterface.cpp,439)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="smiinterface.cpp:439">
<![LOG[Failed to create list element with key value 'a4-17-31-f3-e4-28' (0x8022001B)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="smiinterface.cpp:439">
<![LOG[pSetupPass->addListItem( m_spSettingsEngine, pszNamespace, pszPath, pszKeyValue ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\smiinterface.cpp,1187)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="smiinterface.cpp:1187">
<![LOG[m_pSMIInterface->addListItem( SetupPassValue[eSetupPass], pszComponentName, pszPath, pszKeyValue ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\xmlanswerfile.cpp,738)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="xmlanswerfile.cpp:738">
<![LOG[AddListItem( eSetupPass, XML::TcpIp::ComponentName, XML::TcpIp::Interfaces::InterfaceElement, sIdentifier ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\xmlanswerfile.cpp,1063)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="xmlanswerfile.cpp:1063">
<![LOG[m_pImpl->AddAdapterTcpIpSettings( XMLAnswerFileImpl::WindowsPE, adapterInfo ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\winpeanswerfile.cpp,176)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="winpeanswerfile.cpp:176">
<![LOG[pAnswerFile->AddNetworkAdapter(adapterInfo), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\netadaptersettings.cpp,575)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:575">
<![LOG[Failed to configure adapter 1 (0x8022001B)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="netadaptersettings.cpp:575">
<![LOG[adapterSettings.Configure( pAnswerFile ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\netsettings.cpp,188)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netsettings.cpp:188">
<![LOG[Failed to configure network settings for adapter 2 (0x8022001B)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="netsettings.cpp:188">
<![LOG[m_pNetSettings->Configure(pAnswerFile), HRESULT=8022001b (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootstrapsettings.cpp,191)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="bootstrapsettings.cpp:191">
<![LOG[this->createAnswerFile(sAnswerFilePath), HRESULT=8022001b (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootstrapsettings.cpp,140)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="bootstrapsettings.cpp:140">
<![LOG[pSettings->configureAnswerFile(), HRESULT=8022001b (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootshell.cpp,595)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="bootshell.cpp:595">
<![LOG[Execution failed with error 8022001B.]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="bootshell.cpp:703">
<![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="environmentlib.cpp:553">
<![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="utils.cpp:809">
<![LOG[RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="2" thread="808" file="utils.cpp:809">
<![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="2" thread="808" file="utils.cpp:842">
<![LOG[End program: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="bootshell.cpp:725">
<![LOG[Finalizing logging from process 800]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="tslogging.cpp:1583">
<![LOG[LOGGING: Setting log directory to "E:\SMSTSLog".]LOG]!><time="14:10:49.130+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="tslogging.cpp:1808">Then it's using a different boot image that doesn't have the NIC driver. The OS that the TS starts out in has no impact on the WinPE environment. Either the driver is there and properly loads or it doesn't -- there is not and cannot be any connection to
the OS the system was booted into prior to PE booting.
Thus, the only possibility here is that the boot image does *not* have the NIC driver in it. You need to verify which boot image I being used in both cases.
Jason | http://blog.configmgrftw.com | @jasonsandys -
Client's Software Center is Empty
Hi everyone,
I have been working on an issue here for a couple of weeks and cannot figure it out. Our clients are no longer getting an updated list of available programs when they access they look at the Software Center. This is most obvious with new
clients that have just been added or with rebuilt systems. I have checked dozens of different logs and settings and have reinstalled the client on a number of machines to no avail. I have run the SCCM 2012 R2 configuration analyzer, but
it didn't tell me anything. Reinstallations of the SCCM Client did not resolve this issue, nor did a fresh installation. This particular system has been upgraded a few times, so it is possible something broke during an update recently.
Has anyone had this issue as well? Does anyone have any recommended things to check?I opened the logs in "C:\Program files\Microsoft Configuration Manager\Logs", "C:\Program files\SMS_CCM\Logs\" as well as the inetpub logs and found these errors that might mean something. I could not find any of the Site Server
logs listed in that link on our server.
P.S. I forgot to mention that it is running SCCM 2012 R2 CU4.
MP_Status (repeat events) - Mp Status: processing event: SMS_SUMScanAgentError_ScanFailed, for machine: SITE-LAB-23 MP_StatusManager 2/18/2015 1:40:30 PM 4320 (0x10E0)
MP_Policy (Every rows contains the same thing)- Detected at least one row in the result set from PolicyAssignment table which does not have a Signature, rejecting all rows. MP_PolicyManager 2/19/2015 10:51:09 AM 1616 (0x0650)
MP_GetPolicy (This entry is calling for existing Package IDs)- MP IP: Policy ID=DIV2005F-DIV00026-4B929717 Version=614.00 not found MP_GetPolicy_ISAPI 2/18/2015 2:08:31 PM 7164 (0x1BFC)CProcessPolicyBlobRequest::GetPolicyBlobFromDatabase():
QueryDatabaseForBlob() failed MP_GetPolicy_ISAPI 2/18/2015 2:08:31 PM 1520 (0x05F0)
CCM - ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account HFCRD37\svc_TheAccount (00000035) SMS_CLIENT_CONFIG_MANAGER 2/19/2015 10:00:25 AM 6936 (0x1B18)
CCM - ---> ERROR: Unable to access target machine for request: "2097153677", machine name: "SITE-CART4-22", access denied or invalid network path. SMS_CLIENT_CONFIG_MANAGER 2/19/2015 10:00:47 AM 6936 (0x1B18)
SMSWRITERLOG - *** [08001][-2146893051][Microsoft][SQL Server Native Client 10.0]A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct
and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. SMS_SITE_VSS_WRITER 6/14/2014 11:43:30 PM 1548 (0x060C)
DISTMGR - Failed to process package DIV00037 after 46 retries, will retry 54 more times SMS_DISTRIBUTION_MANAGER 2/19/2015 10:19:32 AM 4672 (0x1240)
CERTMGR - Failed to get connector certificate SMS_CERTIFICATE_MANAGER 2/19/2015 8:44:46 AM 4576 (0x11E0)
PATCHDOWNLOADER - Failed to create directory
\\TheServer\sccm_updates$\6d8590bd-038e-4455-9764-30875ccbf0c7.1\, error 5 Software Updates Patch Downloader 11/6/2012 11:14:49 AM 5092 (0x13E4)
SMSDBMON - Warning: Could not create file C:\Program Files\Microsoft Configuration Manager\inboxes\ccr.box\308202F5308201DDA003020102021015834949D30B51824A6B1FAAA17B7667300D06092A864886F70D01010B05003016311430120603550403130B53697465205365727665723020170D3132313032333136343734395A180F32313132303933303136343734395A3016311430120603550403130B5369746520536572766572.CPC,
Error=3. SMS_DATABASE_NOTIFICATION_MONITOR 2/19/2015 9:58:48 AM 4620 (0x120C)
SMSDPMON - Failed to create certificate store from encoded certificate..
An error occurred during encode or decode operation. (Error: 80092002; Source: Windows) SMS_Distribution_Point_Monitoring 11/5/2012 2:18:42 PM 3008 (0x0BC0) -
Hello,
We do not have a need for the Software Center as we use another product to present applications to users. At the moment we use SCCM for inventory, wsus and software we can't push through our other product. Do we need to keep Software Center for anything we
don't plan on having a software catalog? Is there a way to prevent it from installing? I did not see an option in client settings.I would recommend not doing this. The Software Center can be really useful for administrator troubleshooting.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Maybe you are looking for
-
I want to send emails to List in my contacts
I have several lists in my contacts, which I can see when just accessing contacts, but it won't let me 'select all'. then if I go to compose, and call up contacts, it doesn't let me see the lists. and I would like to copy from one email and paste to
-
How to change the order of picture folders loaded from my Computer to my TV via Apple TV?
My picture folders have this format: YYYY-mm Folder name. In iTunes I activate homesharing and chose my photo gallery on my PC. I would like to have folder, say 2012-08 "Folder name" to appear on the top(not at the bottom) of the long list of folders
-
Oracle 9i 9.2.0.6 on HPUX 11, now want to migrate HPUX 11i migration
Hi, Query 1:Currently our database is running on HPUX 11, we would like to migrate the OS to HPUX 11i. Can anybody help us whether the 9.2.0.6 is compatible with HPUX 11i? If yes, is there any list of patches that needs to be applied on Oracle 9.2.0.
-
Hi, Bapi or function module to update RBCO table from an internal table.
I have a requirement to update RBCO table from an internal table. is there any Bapi or function module or any other method other than update, modify statements. Moderator message: Welcome to SCN! Moderator message: please do more research before a
-
Non Admin System User in Oracle Linux
When installing OL 6-3 I am asked to specify the root user and at the end of the installation a non admin system user. I am slightly confused as to the purpose of this non admin system user. Q1. What is if for / not for and how does it differ from ro