Software Component in Integration Design
Hello,
I have just imported a software component for our IS-U system. Then I have created a namespace as well as a message interface. But when I try to locate this software component in the transaction "sproxy", I can't see it. The CPA cache causes sometimes trouble, but at the moment it has a steady state. It is also possible to add dummy namespaces to existing software component, these are displayed correctly.
Maybe this is a conceptual problem? Is it not allowed to create a proxy from an is-u software component on a netweaver system?
thank you very much,
Oliver
Hi Prasad,
thank you very much for your answer. I have activated all the changes in the int rep and I also checked my connection like you have suggested and still I can't generate the proxies for my new software component. Maybe this is really a conceptual problem, maybe it is not allowed to generate a proxy on a netweaver 04 system, that has not a IS-U.
I don't know.
Thanks
Oliver
Similar Messages
-
How to delete/remove the software component from integration repository
Dear All
How to delete/remove the software component from integration repository which we have created some Data and message types.
Regards
BlueHi,
Follow the steps below to delete the Software component:
1. Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, Interface Mappings and other imported objects like RFC's or IDoc's. Activate all changes.
2. Then delete the namespace and the default datatypes present with the namespace after checking "objects are modifiable".
3. Then delete the SW component, after placing the radio button in "Not permitted".
Regds,
Pinangshuk. -
Problem when import software component into integration
Hi all:
Could you please help me with the following problem?
I crated some software component in SLD. Then I tried to import it into integration builder design
through tools ---> transfer from SLD --->
import software component Versions, the system prompted
me that cann't access Ecc0101:500000(on which PI is installed).
Could you please tell me the possible reason why
such an error happen ? or how to trace the problem ?
is it regarding message server or something else?
Thanks in advance !Hi,
you should check your SLD connection:
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Regards
Patrick -
Duplicate Software component in Integration Builder Desing
Hi all,
I have a problem with the Integration Builder Desing, in the objects apperars the SAP_BASIS software component two times. One of them have the sofware component versions, but the other one is empty. How can delete the emptie one?
I can delete the one with SWCv, but when I import the SWCv the systems create a new one again. But I can not delete the emptie one.
Thanks in advance.
RPHi,
is it first time ?? then you need to update some patch , check in service.sap.com , i am sure , earlier , isaw one not related to this issue.
If it is not first time using XI , then better to update the Cache.
see the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards
Chilla -
Can't delete Software Component in Integration Repository
Created Software Component,technical system, business system in SLD. Imported SC into IR (didn't create any scenarios/Dt/Mt/mi/etc yet).
Want to delete the Software Component and remove it from Integration Repository. Was able to delete in SC SLD, but cannot detemine how to delete in IR. The delete option is gray out. Any ideas..Hi,
If you haven't activated it yet, then you can simply Reject Changes from the change list.
Otherwise, to delete SC you need to delete the SC Version (open for editing and choose "Delete SC version" from the menu). It is possible after you removed all namespaces and their objects.
The SC will be removed if it has no SC Versions in the IR.
Hope this helps. -
No software component in integration builder
hi all,
currently i just setup a cms using my single development server, i follow all the guides from creating domain, track, add the software component, but when i go to the integration builder, there was no software component in there, is there any solution for my case? thanks.Hariyono,
You are talking about two things here. One you dont find any software component in your IR. Did you mean any software component or the SWC you createtd in SLD. If you dont anything then it might be a new box and you need to import the XI content as given by Mark.
Else if you are talking about the one you have created in SLD you need to import.
Also you are talking about tracks, domain. This is for transporting the objects to a different system. So while transporting you using CMS we use this. For this we will first transport the SWC and then all the IR objects.
Also for correct exact responses, please state your issue in detail.
Regards,
---Satish -
Not able to import software component into Integration Repository from SLD
Hi,
I am new in XI(PI). I have created Technical system, business system and software component properly.
But when I go to IR and import the software component, it gives me an error message +*'Unable to read software component versions from System Landscape Directory "sapxi:50000".
Can anyone tell me the reason for this...and solution...Please help me out...
Thanks/Regards
Dinesh Singh.Hi,
As your question says that,your are not able to import your software component version in to IR.
First better you cross check your software component is available or not in the SLD.
Can you please go to SLD and got to search field and give your software component name and search for the availablity.If you are able to see your software component detailse and after referesh your cache.environment->clear sld data cache
and try once and also please check your SLD information like logical system name and everything and try If still your facing the same problem let me know.
Just check if the replies in this thread help you:
unable to import from SLD
Unable to read software component versions from SLD
Please reward points
Thanks
Vikranth -
Installation Software Component ADOBE LIVECYCLE DESIGNER 7.1
Hello,
I need to implement adobe interactive forms with SAP ABAP web dynpro.
The version of application server is SAP NW AS 6.40.
I am trying to download installation software of Adobe Livecycle designer in SAP Software Distribution Center but it says "data not available". Where can I find the initial installation of the builder?
Thanks for your help,
TanguyTanguy,
You can download the Adobe LiveCycle Designer 7.1 installer from SAP Service Marketplace itself.
Goto http://service.sap.com/installations
Select Entry by Application Group -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 04 -> Installation and Upgrade -> <Choose any OS and DB combination.>
There should be a file for ALD 7.1 called 01200615322000000711.zip.
Additonally please refer notes 962673 and 965548 for information regarding installation.
Chintan -
How to delete Software Component in XI ?
Hi,
I have created a Software component with a NameSpace Containing Some Scenarios. Now i would like to delete this Software Component as a whole from the IR.
I tried deleting :
1.From the SLD Software catalog - Deleted the s/w product and associated component , it was deleted in the SLD s/w catalog but no effect in the IR Side.
2.Deleted all the XI Objects and NameSpace in IR , but still empty software component exist in IR.
Any help in this Regards will be appreciated...See this
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards,
Prateek -
Duplicate software componentn in Integration Repository
Hi Experts,
I have a scenario here in which I was trying to move my objects in Integration Repository from dev to prod by simply exporting it. I have done exporting all objects by choosing " All objects of Individual Namespaces ".
Now, my problem is when i successfully Imported my objects to production. It does not update the existing Software component version where my object is located, but instead, it creates a duplicate Software component containing the same Software component version and namespaces(old-running in production and newly created objects).
I haven't activated this yet, beacause I was trying to delete this, but whenever I try to delete what I have imported, it says that the old namespace would be affected since they have the same namespace in which this is already running in production.
Do you have any idea how can I delete what I have Imported, our Go-live would be next week. and also how will I export my objects in dev, without duplicating it in prd. Thanks in advance.Hi,
I hope you can try " Reject Changes" if didn't activated the SWCV. Else for deletion, you can use below weblog.
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Secondly have a look into below document for consistent changes for SWC while transporting,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/adb8f911-0d01-0010-82b9-a8134d7d89d5?quicklink=index&overridelayout=true
Regards
Aashish Sinha -
Hi,
Could you please let me know how to delete a software component in XI.
Regards,
ChandraHi,
Follow these steps to delete the software component:
Delete all Data Types, Message Types, Message Interfaces, Message Mappings, and Interface Mappings in all the namespaces present in the software component except the default datatypes in all the namespaces present in the software component.
Also delete the imported objects if any in the software component. Then activate all the changes.
By double clicking the software component, delete all the namespaces present in the software component, and do not save it.
Now delete all the default datatypes in all the namespaces present in the software component and now save the software component and activate the changes.
Now double clicking the software component> Goto Software component version menu> from the drop down select the delete option. this will delete the software component from IR.
Now goto SLD and select the software component and remove it.
Then clear the SLD cache. Now the software component will be deleted.
Also refer this blog:
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards,
Nithiyanandam -
Remove deleted software components from Integration directory
Hi,
I have several software components and products which have been removed from the SLD.
But I still can see them on the left tree in the integration directory. How can I remove them
from the tree?
Thank you!
Reward points guaranteedHi Michael Schmidt,
At first delete all the namespaces and imported objects under it :
1.Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, and Interface Mappings. If there are any errors during activation, try activating the Objects in the manner specified as specified below
Integration Scenarios
Actions
Integration Processes
Interface Mapping
Message Mappings
Message Interfaces
Message Types
Data Types
2.There should be no Imported SAP Objects in the Software Component. If any delete them and activate changes.
3.Delete all namespaces in the editor using sign. Do not save the changes.
4.Delete the two default data types that are created in the Interface Objects-->Data Types of the software component version (ExchangeFaultdata, ExchangeLogdata). Now save changes for the s/w component version and activate the changes. Ignore the warnings that pop-up. Your change list should look like the below.
Then u delete software component by:
Double Click on Software Component, On Right Hand side >Go to Software Component Version>Delete the software component.
U can also refer following link:
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards,
Vinod. -
How to delete Software Component Version From I.R
Hi,
Any Body tell me how can i delete Software Component Versions From Integration Repository there is no delete option showing on Right click. i already deleted dependent components thanks in advance.
Thanks
kiran.BHi Kiran,
Check this blog. It is stating how to delete SWCV :
<a href="/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder:///people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards,
Subhasha Ranjan -
Can we change the Software Component Version's Name?
Hi everyone,
Can we change the Software Component Version's Name in the Integration Repository? If we can, how can we change it?
Regards,
Nickhi Nick,
Procedure:
1. create a new software component in SLD
2. create a new version of this software component in SLD
3. import in into the repository
4. try using release transfer to transfer objects
from old on to the new one
http://help.sap.com/saphelp_nw04/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
5.delete the old software component
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
BTW
<b>do not chage it in the database!</b>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Error in Integration Scenario: No software Component version exists
Hi Experts,
We have external product and software component like Product "Project Management" we have imported the CIM content for it
Now when we create an Application Component for the same in Integration Scenario in ESR (PI7.1)
while trying to do right click --> Edit Action it gives Error
"" No imported software component version exists for product"
Also note that it allows us to Add new Action there
that is we can right click --> Add action
Kindly help with your suggestions to resolve this << Moderator message - Everyone's problem is important >>.
Regards,
Jagadish
Edited by: Rob Burbank on Nov 10, 2010 3:56 PMHi Experts,
Tried the steps given in SAP Note: 768148
Still it is not resolved.
I appraiciate if any one suggest some more options to resolve this.
Regards,
Jagadish
Maybe you are looking for
-
LDAP syntax of multiple values SSD in ldapclient command
Hi, I need assistance with the syntax of multi-value SSDs in a ldapclient command. Any help or pointing to the right direction/documentation is very appreciated. I am trying to use the ldapclient command to manually configure a ldap client with multi
-
Envy 4502 all in one won't print from Windows XP
I just set up and successfully installed the software for my Envy 4502 on an old PC running Windows XP. The internal test page comes out fine, but when I send a document it appears very briefly in the print queue then disappears and the document won
-
HELP! This latest LR4 update has somehow turned my RAW files into these wretched looking too bright, too yellow/orange, messes. I DO NOT have it set to auto import with any presets. I am not able to "reset" back to the usual dull, blah, flat looking
-
Why is my iPhone5 not being recognized in Finder?
Why is my iPhone5 not being recognized in Finder?
-
Safari4.0 Beta will not allow internet access
I lost all ability to wirelessly connect to internet after I installed Safari4.0 Beta. Tried to uninstall and it will not allow me to uninstall 4.0 Beta. It asks where to install program, only offers choice of HD and then says it cannot install there