Software Component Version

Hi Friends,
I maintained two Namespaces(say Name1, Name2) under a Software Component version.
I developed a scenario under Name2. But i found it wrong. So I deleted all the objects in it like interface objects, mapping objects and also ExchangeFaultData, ExchangeLogData by mistake. Now iam trying to delete the whole namespace from SWCV. But Iam unable to go to the edit mode of SWCV and also iam unable to activate the SWCV.
Please do help me to delete the namespace under the SWCV

Sorry Typing Mistake.
First Delete all the objects that u have created in that namespace. Once that is done activate the scenario.
After that delete Exchange log, Fault data type. Then go to software component and delete name space. Save the SWC component and then activate the SWC.
Let me know if u face any problem.
If u delete any object by mistake, u can go to change list, select object and say reject change.
-Gouri

Similar Messages

  • Can not view a Software Component Version in Enterprise Services Repository

    Hello,
    I'm trying to import in ESR the software component version created in the SLD. I'm using SAP PI 7.3.
    Into to work area select  Software Component Version and click on checkpoint Import from SLD. Click in bottom Display (List of Software Component Versions) and it show me the list but cannot view the Name of the SWC created.
    I cleared the cache (Environment - clear sld data cache) and the result it's the same, not show the SWC the I created.
    Do you have any idea?
    Thank you in advance.
    --erva

    Hi,
    as it's a new installation, you certainly missed something. have you did controls of Readiness Check doc and tcode SLDCHECK ([see PI 7.1x oss note|https://service.sap.com/sap/support/notes/1143810]).
    and check these post installation controls (but it's for PI 7.1): [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e?QuickLink=index&overridelayout=true]
    Mickael

  • Some Software Component Versions do not show up in transaction sproxy

    I have a landscape with a CRM system, a PI system (with the SLD on it) and some other systems.
    In transaction sproxy in the CRM system the Software Component Version SAP CRM ABAP 7.0 shows up, but others that should be there like SAP ABA 7.01 are not there.
    So I went on the SLD and edited the technical system for the CRM system, I added the product SAP CRM 7.00 and set the checkmark for installed for the relevant SWCVs like SAP ABA 7.01.
    I then went to the business system for the relevant CRM client and there also checked those SWCVs.
    But still they do not show up in transaction sproxy in the CRM system.
    What am I missing?

    Hi Monika,
    There's several suggestions that you could look at to help resolve your problem in this thread:
    [Can't find  ESA ECC-SE 603 SWCV;
    Regards, Trevor

  • Unable to read software component versions from System Landscape Directory

    Hi XI,
    Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
    Could you please give me some hints?
    Thanks,
    Bruce

    hi,
    i have also problem with "import software componenet version "
    i got a message like
       "unable to import software component version from
    system landscape directory ......."
    than i gone for SLDCHECK...i got an error it is ............
    calling function LCR_LIST_BUSSINESS_SYSTEM
       Retreiveing data from the sld server function call returned   exception  code 4
      connection to sld does not work
      check sld function and configuration
    what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
    with regards
    Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
    Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM

  • Unable to read software component version from System Landscape Directory "

    I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
    A) Is my understanding on resolution correct?
    Should I go and apply notes 940309 and create client copy of existing client 001
                                        OR
    change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
    I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
    B) Here is what I have done and the error:
    1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
    2) When I import the SWC from integration repository getting error
    (Unable to read software component version from System Landscape Directory "server:5<system number>00").
    C) Pointers used from the forum to debug the issue, but still no luck
    Below are the points checked from the forum and all steps are correct, but still have issues with the import
    1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
    2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
    3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
    4) logged using PIAPPLUSER http://server:port/sld and it works
    5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
    Notes: 940309
    You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
    You don't want to use the default client 001, but another client as Integration Server.

    applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
    Note:
    I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
    A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
    http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
    1.      Call the wizard-based configuration tool as described in Configuration Wizard.
           2.      Select the scenario PI and the task PIPostInstallProcess.
           3.      Choose Execute.
    A list of the steps to be executed by the wizard is displayed.
           4.      Choose Install.

  • Unable to read software component versions from System Landscape

    Dear all,
    I have an ECC system with ABAP and Java installed.
    I already configured so that SLDCheck, RFC destination configuration run successfully.
    PIAPPLUSER is not locked and can logon.
    However, when I import software component version in Integration Builder, the system return error message "Unable to read software component versions from System Landscape Directory "Server:50000".
    Please tell me how to correct this error.
    Giang

    Hi,
    Check this
    http://****************/Tips/XI/SWComponentError/Resolve.htm
    "Unable to read software component versions from System Landscape Directory
    Unable to read software component versions from System Landscape Directory
    unable to import from SLD
    Regards
    Seshagiri

  • Migrate from XI 3.0 to PI 7.11 software component version question

    Hi,
    We are migrating from XI 3.0 to PI 7.11. there are about 2000 receiver determination, etc.
    We have to assign for every receiver determination, interface determination etc a new software component version.
    does anyone know how to do this automaticly.
    regards meinhart

    The SWVC in receiver determination is not relevant for service interfaces of type "XI 3.0 compatible".
    So you can leave the fields emtpy.
    The technical background for this SWVC in receiver determination is finding the correct operation for a message.
    But XI 3.0 compatible service interfaces have only one operation with same name as the interface.

  • Error in Integration Scenario: No software Component version exists

    Hi Experts,
    We have external product and software component like Product "Project Management" we have imported the CIM content for it
    Now when we create an Application Component for the same in Integration Scenario in ESR (PI7.1)
    while trying to do right click --> Edit Action it gives Error
    "" No imported software component version exists for product"
    Also note that it allows us to Add new Action there
    that is we can right click --> Add action
    Kindly help with your suggestions to resolve this << Moderator message - Everyone's problem is important >>.
    Regards,
    Jagadish
    Edited by: Rob Burbank on Nov 10, 2010 3:56 PM

    Hi Experts,
    Tried the steps given in SAP Note: 768148
    Still it is not resolved.
    I appraiciate if any one suggest some more options to resolve this.
    Regards,
    Jagadish

  • Could not read list of software component versions

    Hi,
    I am trying to import software components from sld into esr. When i click on display available components i get the error :
    Could not read list of software component versions
    The details show:
    Could not read list of software component versions
    from SLD (COULD_NOT_READ_SWCV)
    HTTP response code: 403 (Forbidden)
    we were initially getting access issue  also in details, but that has been rectified by assigning appropriate roles.\
    Kindly help.

    Hi,
    Use t-code SLDCHECK on ABAP stack to confirm the connection of XI system and SLD.
    Check whether SLD and XI system are on same server. Refer to OSS note - 720717 to integrate XI with other SLD.
    In the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
    com.sap.aii.connect.cr.httpport
    com.sap.aii.connect.cr.name
    com.sap.aii.connect.landscape.httpport
    com.sap.aii.connect.landscape.name
    GreatDay,
    venkatagiri
    Edited by: Giriii on Sep 15, 2011 8:14 AM

  • Proxy error-  unable to find software component version for namespace-

    Hi all,
    I need  help  regarding proxy. 
    I am using SAP standard package for one integration  PI 7.0 to SRM. 
    Here we need to use the datatype enhancement for adding some fields.  So I create one extension_datatype  in the datatype enhancement and add the fields . 
    ( I am using Inbount interface, where I am adding the new fields in  PI)
    Now when I go to SRM system and  Run SPROXY system  to regenerate the Proxy.  So that It can reload the New fields.
    Then it reloads and We activate the same. 
    Now at one place when I clicked the data type enhancement object  its giving the error  that  unable to find software component version for namespace" . I did not understand  why  its giving the error.  I added the new fields in the existing  running datatype enhancement.   and reload the reproxy. 
    I have one more datatype enhancement object in the same software component and in the same name space but its not giving the error. 
    Please  help ,  how to resolve it asap. 
    regards
    ram

    1.the datatype enhancement object may not be activated in the same software component .
    for this try these -
    after creating your data types and designing part. First close all the developement objects windows.
    then click on your sw component which you have created and activate it very first.
    then you will be able to activate all other objects
    or when you start activating your data types a new window with list of the objects which you want to activate opens
    in this new window you can see your sw component as the very last object select it first and activate it
    2. update the cache in both system
    i think these 2 reasons.u try it.

  • Problem with importing software component versions from SLD to I.R

    Hi Guys,
    I have some problem in importing my software component versions from SLD to IR. While connecting to SLD it is using the port 50100. Instead of 50000. We are manually correcting it while connecting to SLD. but when we try to import the Software Component Versions from the SLD to IR. It is saying no objects available in 50100. It is not connecting to port 50000. Pls any body help me with some solution. Thanks in advance.
    Regard's
    Kiran.B

    In the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
    com.sap.aii.connect.cr.httpport,com.sap.aii.connect.cr.name,com.sap.aii.connect.landscape.httpport,com.sap.aii.connect.landscape.name
    Also check with Tcode SLDCHECK too

  • Unable to import software component version in IR

    Why i can't import software component version in IR by Tools->Transfer from SLD->import software component version?
    error message is "Unable to determine dependencies of software component version"
    i just create it in SLD before, anything else need to do?
    please give me some information, Thanks!

    Hi Robert,
    Please cross check with this blog on how to create a SWCV and import in IR.
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
    Regards,
    Sachin

  • Unable to import software component version  from sld

    hi,
    i have also problem with "import software componenet version "
    i got a message like
    "unable to import software component version from
    system landscape directory ......."
    than i gone for SLDCHECK...i got an error it is ............
    calling function LCR_LIST_BUSSINESS_SYSTEM
    Retreiveing data from the sld server function call returned exception code 4
    connection to sld does not work
    check sld function and configuration
    what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
    with regards

    Hi,
    Make sure you have did all the configuration.....
    http://help.sap.com/saphelp_nw70/helpdata/EN/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
    cheers
    Sunil.

  • Import of Software Component Versions

    Hello.
    My problem is in Integration Repository, in Import of Software Component Versions.
    Mensagge is:
    " Unable to read software component versions from System Landscape Directory ".
    I want import software component.!
    Help my please.!!!
    [email protected]
    In tx sm59, result.
    Exchange Infrastructure: Test LCR Connection
    RFC destination SAPSLDAPI does not exist
    => Create the RFC destination by using transaction SM59!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    Now checking access to the XI Profile
    RFC destination LCRSAPRFC does not exist
    => Create the RFC destination by using transaction SM59!
    Message was edited by:
            Claudio Leon

    Indeed, the instación this incomplete.
    It is possible that you indicate to me step by step like making these steps to finish the installation, since I have not been able to finalize and they appear to me new errors.
    In SLDCHECK resquest is:
    Exchange Infrastructure: Test LCR Connection
    Properties of RFC destination SAPSLDAPI
      RFC host:
    %%RFCSERVER%%
      program id:      SAPSLDAPI_UNICODE
      gateway host:
    plata
      gateway service: sapgw00
    Testing the RFC connection to the SLD java client...
    RFC ping returned exception with message:
    Error when opening an RFC connection
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    Now checking access to the XI Profile
    Properties of RFC destination LCRSAPRFC
      RFC host:
    %%RFCSERVER%%
      program id:      LCRSAPRFC_UNICODE
      gateway host:
      gateway service:
    Testing the RFC connection to the SLD java client...
    RFC ping returned exception with message:
    Error when opening an RFC connection
    help me.
    [email protected]

  • Error in IR Namespace is not defined in the software component version

    Hi All,
    Please provide your valuable inputs to resolve the issue.
    Namespace http://xxx.com is not defined in the software component version xxx_xxxxxx , 1.0 of xxx.com
    Though the software component was already created in SLD and imported.All the developers were able to access the software component and create the Namespaces for their scenarios, but when tried to Activate the scenario above mentioned error is displayed.
    Below are the checks done.
    1.In Exchange Profile checked the properties,
    com.sap.aii.connect.cr.httpport
    com.sap.aii.connect.cr.name
    com.sap.aii.connect.landscape.httpport
    com.sap.aii.connect.landscape.name
    2. Tried to import the software components once again through IR -- No results
    3. Restarted the Java Engine through SMICM -- No results
    4.Performed the SLDCHECK no errors.
    Inputs please at the earliest
    Regards
    Shiva.

    Hi Jochen,
            This is occuring due to that the created namespace is not getting activated. As mentioned in earlier replies that if you have copied objects from somewhere else then all the related information should also be copied. If the problem resists then you can create all the needed objects in IR again and activate it separately instead of activating all at once.
    Regards,
    Subhasha

Maybe you are looking for