[Software Correction]:The amount requested issue

Issue:
The amount requested in the confirmation email for a traveler doesn’t match the amount requested in SAP Cloud for Travel and Expense system. It shows 3 times the amount of the requested.
Cause:
There is an issue with the requested amount shown on emails for expense reports which were initially submitted with a amount of 0.0 then recalled and resubmitted with an amount > 0.0.
The issue affects only the amount shown on the emails, the posted/paid amounts are always correct.
Resolution:
SAP has rectified this issue and a software correction is created which will be deployed in a few days after the system upgrades to 1408.
Thank you.
Regards,
Cryssal

Hmm- added "sudo" and there was no error reported:
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize xxxxxx
I guess we'll see.

Similar Messages

How we will know the amount of issued P.O.

Hi All please suggest me,
When we issue a Purchase Order then there is accounting effect or entry.
If there is no accounting effect how fi user will understand from system how much Purchase Order
has been issued. Because according to that the accountant have to arrange the fund to meet those
expenses . Please tell me how it will show the cash flow of the company in the system .
Best Regards
Amitava Saha

Dear:
No accounting entry is generated at the time of PO creation. FI is only updated at MIGO and MIRO. However you can cater your requirement from ME2L.
Regards

I have subscribed to Adobe Export PDF for one year and paid the fee per my credit card. I just received an sms to inform me of the amount of R230.61 was deducted today by Adobe Systems Software. I did not request to renew for another year.

I have subscribed to Adobe Export PDF for one year and paid the fee per my credit card. I just received an sms to inform me of the amount of R230.61 was deducted today by Adobe Systems Software. If you have charged for another year, please cancel that service and refund me as I did not request renewal for another year. I don't find this service very useful as documents converted to Word is not really usable when trying to do changes and amendments to the document.
Please confirm.
Regards
Esther Grove
082-334-6786
Email: [email protected]@

Hi,
I have cancelled your Export PDF subscription for the order no.AD001162465AP..
Your refund no.is 66181102.
You will get the refund in 7 business days.
Regards,
Florence

Since downloading Mtn.Lion my epson printer doesn't work correctly & the entire system seems to be slower plus my iMac now disconnects from my wifi every time the mac sleeps. Can anyone help me with these issues?

I am having problems with my Imac (approx 1 yr old) every since I downloaded (from the App.Store) Mountain Lion. I am a working mom with 3 toddlers.....I have very little time to work on the computer which I primarily use for photograhpy needs. I am not computer savvy enough to figure out how to "fix" the new issues/problems and am frustrated. I am hoping someone can help me........
Issues just since downloading Mountain Lion:
1) My Epson R2400 printer is not printing properly. It wouldnt print at all from CS5 the first 2 days. Then just started printing. The prints aren't nearly as good as they used to be. I just installed Photoshop Elements 10 and have been able to print but the prints are just awful. I printed a test page and it was perfect. I've triple checked the settings in the print dialogue box to ensure the correct paper is chosen, etc. I've never let the printer manage the color before but it is the only option that gives a mediocre print at best.
     I've gone to Epson.com.   It says to update driver through Apple for Mtn. Lion. According to my computer I have no updates. Printer is connected via USB. Changed the ports, turned printer on & off. Emailed epson & they said to reset the print queue, which I did. Restarted the IMac Still no luck. (The error message I got when trying to print from CS5 is "filter failed." But, as stated before it just started printing today as I was typing this.
      I print out pics quite a bit and it seems the only time I have ever had problems is when I upgraded the OSX system. Why is that?? When I upgraded to 10.7 is when I first realized my print quality went down.
2) Now every time I "wake" up my computer it has become offline and has to go through the steps to reconnect to my wifi. Never did that before Mtn.Lion. I purchased the Airport Extreme Dec 2011. My computer was always connected before the update. Now I have to scroll down & pick my network & wait for it to connect before proceeding.   I double checked preferences and it is set up to check for updates automatically. What is that about??
3) It just seems that my system overall is slower. I love my mac but I am frustrated because I don't have the free time needed to do all this problem solving. I just need it to work properly when I have a few minutes to work on a picture. I imagine there are other issues, but these are the only 2 areas I've focused on since the upgrade.
I've read different views/feedback on Mtn Lion but haven't come across the printer issue or the wifi connection issue.
Can anyone direct me towards a solution? I really appreciate it!
T

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

HT1844 Library Issue: I just imported 2 CD's into ITunes. They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them.

Library Issue: I just imported 2 CD's into ITunes. They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them. They show up in the search box, but when I click on the results it just kicks me to ALL my music. I have imported thousands of songs/CD's before and this is a new one.

Something may have gone wrong with the index of the Music playlist. Making another change to the library such as downloading the current iTunes Free Single of the Week, or deleting one track from your library and reimporting it, should fix the problem.
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up which ought to correct things.
tt2

We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize. We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process i

Hi
We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.
We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process in captivate 6. so we request you to create a plugin or give a best option which have batch render quality and optimize in file size,

Captivate is e-learning development software not a dedicated video convertor, you are better off trying something like Adobe Media Encoder or Super.

What is the correct fsck syntax for issue with invisible disk ?

Hello everybody,
My problem actually (I also have a problem with the 17" Install DVD) is to repair *3 disks* with *fsck command*, as the filesystems are damaged. I phoned Apple Assistance Saturday, for about 30 minutes, but finally the Advisor sent me a link to one of their thousands (and sometimes obsolete) articles, and the solution wasn't there entirely.
I'll describe you the problem :
One of my USB external disks (4TB data) *doesn't appear* after Startup, but when I use the Install DVD and Disk Utility, the application tells me it's OK, that the disk "SEEMS" to be alright etc. That's false.
When I reboot with *Cmd + S* (root level), and tell Terminal (I have been obliged to print the four states of an American Extended keyboard) :
"sudo fsck -fy /dev/disk4s1"
the reply is :
"BAD SUPER BLOCK: MAGIC NUMBER WRONG
LOOK FOR ALTERNATE SUPERBLOCKS? yes
SEARCH FOR ALTERNATE SUPER-BLOCK FAILED. YOU MUST USE THE
-b OPTION TO FSCK TO SPECIFY THE LOCATION OF AN ALTERNATE
SUPER-BLOCK TO SUPPLY NEEDED INFORMATION; SEE fsck(8)."
So, I use the *-b option* of *fsck command*, and :
"fsck: -b flag *requires a number*"
"-b size Specify the size, in bytes, of the physical blocks used by
the -B option."
So, I'm searching *since 3 days* (and *I'm learning a lot*, but nothing, of course, concerning my problem) the full info command to know *what sector address* I have to tell to -b to install an alternate superblock, because I need to know exactly at which places filesystems and *data start* and end.
You understand, I suppose, that I can't use any of my softwares, because the disk is INVISIBLE (doesn't exist) after normal restarting.
It's not MOUNTED nor UNMOUNTED.
It exists (very well, thank you) when rebooting *with Apple Install DVD*.
I'm under *Snow Leopard 10.6.5*, and I don't know if, perhaps,
*there wouldn't be a problem* (or more) with this update ...
That's what I've seen, in any case, on other places here,
about several different issues.
Please, Bob, Gary, Camelot, etresoft, Bill, Jun, Nils, Cole, Charles, Michael,
gimme some help !
If someone has the full solution, a beginning of solution,
or a path to solution,
thank you very, very much in advance !
With my best regards
Vialatte

Dear Camelot,
First, thank you very much for answering me and try to help me ;
Secundo, please read, if you have time, what I replied to Bill Scott,
and I have to thank you also for your slightly better contribution and understanding.
Some words of what I've replied to him are written for you too :
"I type *sudo fsck -fy /dev/disk4s2* (not s1, of course, and *Camelot is perfectly right*, having remarked this mistake, as *s1 is dedicated to partition map* volumes).
There's also *a strange thing* with Disk Utility when starting from DVD :
it doesn't display the s1 volumes as usual."
As you've read it in my reply to Bill, it's a *complicated issue* and *Apple has no response*.
You tell me : "+Good luck with that.+" It starts badly.
"+It's been a long time since I've had to deal with superblocks+"
I totally ignored their existence …
"+- they just don't come up any more,+" What is the meaning of this sentence ?
"+but I don't know any way of recovering the superblock address after a disk has failed.+" That's the matter of my question : *Is it a failure ?*
"+Typically (at least, historically) you get the superblock addresses in advance, storing them somewhere safe until you need them.+"
That's a total discovery for me.
You tell me then : "+Are you talking about in the Finder here?+" Yes and no, I talk about the Sidebar (see below), but it's part of the Finder.
"+Have you checked the Finder's preferences to make sure it's just not hiding external drives?+" I did, when you told me to do so.
"+Since everything else tells you that the drive is OK+" Yes, you're right, when starting from Install DVD, that's *very strange*, but remember fsck doesn't say *the same at all* as Disk Utility ... "+this just sounds like a Finder preference setting to me.+"
I'm sorry, it would have been wonderful. My settings are correct, that means :
NOTHING on Desktop, ALL (including Computer) in the Sidebar (and clicking on Computer allows me to check that *no volume* has vanished from Sidebar (it happens sometimes).
"+If it's not the Finder prefs, then please post the output of diskutil list in order to troubleshoot further.+"
Here it is (a little far below), but there's *none of the 2 4TB volumes* (yes, there are two disks missing now) here, because, as I already said that, they are invisible for the Finder and *Disk Utility*, and I think *it's the same for Terminal.*
You'll note there's *no BOOTCAMP partition* here (I removed it temporarly to solve this issue), and don't be afraid if there are several systems on the internal HD.
As I noticed it here and there, there are problems with 10.6.5.
So, I try to work with 10.6.4 (delivered with MBP 17"), but have also an universal 10.6.0 Snow Leopard, with which I can configurate 10.6 *at any state*.
Unfortunately, I *can't use* (it so that Apple decided to do) the DVD delivered with my 15" MBP (rejected by 17"), because it is with my MBP 15" that I formatted those disks.
*Another thing :* If I didn't want my wife *to install herself* (with me to help her) the 15" MBP I've gave to her (there's the 17" new 500GB 5400rpm installed in it by me), I would already have tried to connect these two 4TB, just to see.
Last login: Fri Nov 26 21:22:38 on ttys005
sys171064:~ OH$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *500.1 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Seagate 149.9 GB disk0s2
3: Apple_HFS System 17 64.9 GB disk0s3
4: Apple_HFS Sys171064 34.9 GB disk0s4
5: Apple_HFS For Alu Black System 149.6 GB disk0s5
6: Apple_HFS SL 10.6.x 100.0 GB disk0s6
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *16.1 GB disk1
1: Applepartitionmap 32.3 KB disk1s1
2: Apple_HFSX olivier_herrbach 16.1 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk2
1: EFI 209.7 MB disk2s1
2: Apple_HFS HSD 01 TM 600 Go 599.9 GB disk2s2
3: Apple_HFS HSD 01 400 Go 120.6 GB disk2s3
4: Apple_HFS DiskTools > Seagate ... 279.1 GB disk2s4
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk3
1: EFI 209.7 MB disk3s1
2: Apple_HFS HELP ÉNERGIE 1,5 To 1.5 TB disk3s2
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk4
1: EFI 209.7 MB disk4s1
2: Apple_HFS HSD USB 03 1To 999.9 GB disk4s2
/dev/disk5
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *32.0 GB disk5
1: EFI 209.7 MB disk5s1
2: Apple_HFS Patriot USB Key 32 Go 31.7 GB disk5s2
/dev/disk6
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk6
1: EFI 209.7 MB disk6s1
2: Apple_HFS WD USB 1,5 To 1.1 TB disk6s2
3: Apple_HFS WD 02 350 Go Seagate 349.9 GB disk6s3
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.0 TB disk7
1: EFI 209.7 MB disk7s1
2: Apple_HFS HSD USB 02 50 Go 49.9 GB disk7s2
3: Apple_HFS HSD USB 02 715 Go 714.6 GB disk7s3
4: Apple_HFS HSD USB 02 110 Go 110.0 GB disk7s4
5: Apple_HFS HSD USB 02 100 Go 99.9 GB disk7s5
/dev/disk8
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk8
1: EFI 209.7 MB disk8s1
2: Apple_HFS WD USB 2To 2.0 TB disk8s2
/dev/disk9
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk9
1: EFI 209.7 MB disk9s1
2: Apple_HFS FW 03 TM 2To 2.0 TB disk9s2
/dev/disk10
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *1.5 TB disk10
1: EFI 209.7 MB disk10s1
2: Apple_HFS FW 02 1,2 To 1.2 TB disk10s2
3: Apple_HFS FW 02 200 Go 199.9 GB disk10s3
4: Apple_HFS FW 02 CS5MC 50 Go 49.9 GB disk10s4
5: Apple_HFS FW 02 Leopard 50 Go 50.0 GB disk10s5
/dev/disk11
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk11
1: EFI 209.7 MB disk11s1
2: Apple_HFS FC 02 Time Machine 1.0 TB disk11s2
3: Apple_HFS FC 02 SL 1To 999.5 GB disk11s3
/dev/disk12
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk12
1: EFI 209.7 MB disk12s1
2: Apple_HFS FC 01A USB 1To 700.0 GB disk12s2
3: Apple_HFS FC 01C 300 Go Leo 299.9 GB disk12s3
4: Apple_HFS FC 01B USB 1To 699.8 GB disk12s4
5: Apple_HFS Leopard 125 Go 300.0 GB disk12s5
/dev/disk13
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk13
1: EFI 209.7 MB disk13s1
2: Apple_HFS FW 04 TM 2To 2.0 TB disk13s2
3: Apple_HFS eDrive 12.9 GB disk13s3
/dev/disk14
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *2.0 TB disk14
1: EFI 209.7 MB disk14s1
2: Apple_HFS FW 05 2To 2.0 TB disk14s2
sys171064:~ OH$
As you and I see, I strongly believe that disk15s2 and disk16s2 (with s3, s4, s5 etc. partitions) are missing.
I must find a way to prove what I say to you. Remember that we are not in the case where I use *Cmd + s* after rebooting with Install DVD, but under normal utilisation. What follows has no interest :
Last login: Fri Nov 26 21:23:55 on ttys006
sys171064:~ OH$ sudo fsck -fy /dev/disk15s2
Password:
/dev/disk15s2: No such file or directory
Can't stat /dev/disk15s2
Can't stat /dev/disk15s2: No such file or directory
sys171064:~ OH$
So, I will now restart my MacBook Pro with Mac OS X 10.6.4 Install DVD, and go :
—1 in *Disk Utility* ;
—2 in Terminal (with *Cmd + s*).
I'll *note all* what I see, and then write you what I found.
You'll be nice to tell me if there's a way, in these conditions,
a) to *save Disk Utility log* ; or/and
b) to *save Terminal Output(s)* (.txt) ; or/and
c) to *take and save screenshots*, ; or/and
d) to *print anything*. (?)
as I don't know how it's possible to save these informations.
Thank you once more for your help. I'll do things now, but as it is 23:02 here in France, maybe I won't write you till tomorrow.
But, if you can answer to a), b), c) or d) above, post it to me please, because I'll go back here tonight.
And, also, *but I don't want to bore you*, I'd like to learn how to *copy and paste parts of messages* as you did, and how to *insert a Grab item (.png)* in a discussion, because an image is better than thousand words (that's what we say in France, but I'm sure we are not alone on Earth — like in the Universe).
With my best regards
Vialatte

Res.getPathTranslated() does not return correct URL of the page requested

Hi,
The res.getPathTranslated() statement in the below code (in doFilter method) does not return the correct URL of the requested webpage.
Whenever a web page is accessed using a return statement (eg : return "nextPage"; ) inside a button's action method or a hyperlink's action method, the res.getPathTranslated() returns the URL of the current webpage instead of returning the URL of the webpage that is actually requested.
For example if there is a button on the page http://localhost:29080/MyJaas/faces/firstPage.jsp
And the button_action() is as follows
button_action()
return "nextPage";
The res.getPageTranslaged() returns "http://localhost:29080/MyJaas/faces/firstPage.jsp" instead of "http://localhost:29080/MyJaas/faces/nextPage.jsp"
However, if the webpage is requested by populating the URL property of the hyerlink in creator IDE, the res.getPathTranslated() returns the correct (requested) web page.
How to make res.getPathTranslagted() return the correct URL when the webpage is accessed from hyperlink's / button's action method?
I know that the explation is not very clear, so please bear with me. Let me know if you need more clarificatons. Thanks in advance for showing interest in this issue.
And by the way, the code below is the same as that used in Jaas Authentication tutorial :- http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/2/jaas_authentication.html
package jaasauthentication;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.http.HttpSession;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class SecurityFilter implements Filter{
    /** Creates a new instance of SecurityFilter */
    private final static String FILTER_APPLIED = "_security_filter_applied";
    public SecurityFilter() {
    public void init(FilterConfig filterConfig) {
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws java.io.IOException, ServletException{
        HttpServletRequest req = (HttpServletRequest)request;
        HttpServletResponse res = (HttpServletResponse)response;
        HttpSession session = req.getSession();
        String requestedPage = req.getPathTranslated();
        String user=null;
        //We dont want to filter certain pages which include the Login.jsp/Register.jsp/Help.jsp
        if(request.getAttribute(FILTER_APPLIED) == null) {
            //check if the page requested is the login page or register page
            if((!requestedPage.endsWith("Login.jsp")) && (!requestedPage.endsWith("Register.jsp")) && (!requestedPage.endsWith("Help.jsp"))){
                //Requested page is not login.jsp or register.jsp therefore check for user logged in..
                //set the FILTER_APPLIED attribute to true
                request.setAttribute(FILTER_APPLIED, Boolean.TRUE);
                //Check that the session bean is not null and get the session bean property username.
                if(((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1"))!=null) {
                    user = ((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1")).getUsername();
                if((user==null)||(user.equals(""))) {
                    res.sendRedirect("Login.jsp");
                    return;
        //deliver request to next filter
        chain.doFilter(request, response);
    public void destroy(){
}

Guys any solution for the above problem?
Right answer fetches 10 duke dollars..

I am getting entries which are 'all day' entries duplicated 8 to 9 times. I have updated my software on the phone to the latest version. Entries in iCal are only once. I have completely emptied my iPhone of all data. Has Apple resolved the issue yet?

I am getting entries which are 'all day' entries duplicated 8 to 9 times. I have updated my software on the phone to the latest version. Entries in iCal are only once. I have completely emptied my iPhone of all data. Has Apple resolved the issue yet?

Simple solution. Get a real internet service and not a cell phone internet connection service it was never meant to be used as the primary internet service
And how do you lose a home and job and be sued as you claim. What over 10 Gb of data? Give me a break
In my city small claims is $5000.00
And over that amount you can go to a superior court to have your issue settled.
http://www.bbb.org
Good Luck, Elector

SQL Server upgradation Issue : 2012 to 2014. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job.

Message
Executed as user: CORPTST\XXXXX. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job. The error information returned
by PowerShell is: 'Security error. '. Process Exit Code -1. The step failed.
I receive this error during the sql server job 'syspolicy_purge_history' execution when sql server got upgraded form SQL Server 2008 to 2014.

Hi Vishnu,
According to the error message, it also occurs in SQL Server 2012. Here is a feedback about the error in the link below.
https://connect.microsoft.com/SQLServer/feedback/details/754063/sql-server-2012-syspolicy-purge-history-job-step-3-fails-with-security-error
To resolve this issue, please change the value of the following registry key from ‘RemoteSigned’ to ‘Unrestricted’. For more details, you can review this similar
blog.
HKLM\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.SqlServer.Management.PowerShell.sqlps120\ExecutionPolicy
Thanks,
Lydia Zhang

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Try this:
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).

I recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?

I Recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?

Ari343 wrote:
No, the external hard drive does not show up on Disk Utility. I don't have another computer to try it on.
Perform a PRAM reset:
http://support.apple.com/kb/ht1379
Have you tried all the ports?
Have you tried with a different cable?
Have you tested all the ports with other devices to see that they are functioning?
Ciao.

Iphone 5 - Not working and usual options are not correcting the issue

My iPhone 5 will not start. I have tried many options listed on this site, however I have been unsuccesful in resolving the issue myself.
This is an issue that I had last May, which resolved itself after 2 or 3 weeks. I was discussing this with Apple support but got no answer on how to fix it. As it 'self fixed' (i.e. I did not do anything new that I was not trying for 2-3 weeks already and the phone just began operating normally) I guessed it was fixed so I stopped looking for a solution to a problem that did not exist any more.
However, the problem started again last week.
That is to say, the iphone powered down and could not be restarted immediately. I used the 'hard start' option which worked a couple of times, but now it will not restart. During an 'up' period, I upgraded the software to the lastest public release thinking that this might help. However, it has not.
Now, I only get a visual of the USB cord and a message to connect to itunes. When I connect to itunes it does not recognize the phone but does recognize that there is a software error. When I try to restore, it does not work as it brings me back to the error message.
Anyone any ideas? I am trying to organise the final pieces of my wedding in 6 weeks and I really need the phone to work right now! I will be contacting apple directly in the mean time, but if anyone has any ideas I would be very grateful.
Thanks.

Still I can't do anything ... the phone still same when i tried to re do the steps again given that itunes can't restore the phone " unkown error "
What to do ?/??

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

What is the exact error message you are receiving? Have you checked to make sure the connections on each end of the USB cable are nice and snug?
B-rock

[Software Correction]:The amount requested issue

Similar Messages

Maybe you are looking for