Software Distribution Flow between SCCM (2013) and BMC (8.1), using Orchestrator

Hi,
I see same question has been asked in the past with older versions of SCCM, BMC and Opalis...but would like to know if there are any specific benefits or advancements or even higher feasibility of implementing below, using Orchestrator
1) Data load: Load HW/SW Inventory from SCCM into BMC Remedy System. Is it even possible to load Asset Intelligence data so that both systems can correlate common data
2) Create a flow which connects both BMC remedy & SCCM using Orchestrator
a) End user to raise a request in BMC remedy system
b) Shoots an email to Assset Mgmt & Mgr etc for approvals
c) Record their approvals back (thru email or over webisite/url)
d) If approved to create an instruction (deployment) in SCCM for that system
e) Retrieve the status codes received by SCCM, if successful then short mails to user & service desk
f) Modify BMC Remedy Asset Mgmt for that software to reduce availability by one count
g) Close the ticket
or any other simpler connectors available out there ?
Vasu

Hi,
You can try IP for BMC Remedy from Kelverion’s website:
http://blogs.technet.com/b/orchestrator/archive/2012/03/26/bmc-integration-packs-for-system-center-2012-orchestrator-are-released.aspx
The website in the blog seems to be expired.
http://www.kelverion.com/resources/download-request/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Software distribution flow in SCCM 2012

Could someone of you help me to understand the software distribution flow in SCCM 2012 (Troubleshooting flowchart),
which includes the content library concepts..

There is also a troubleshooting book which explains it very well.
http://blogs.msdn.com/b/microsoft_press/archive/2013/11/12/free-ebook-microsoft-system-center-troubleshooting-configuration-manager.aspx
Cheers,
Thomas Kurth
Netree AG, System Engineer
Blog:
http://netecm.netree.ch/blog | Twitter:
| LinkedIn:
| Xing:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The Acrobat 9.x product family passed into "End of Support" mid-year of 2013.
Acrobat 9 support of MS Project via PDFMaker stops with Office 2007.
For Office 2013 support you must use Acrobat XI (11.0.1) or newer.
A good to have reference:
https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Acrobat Pro and Standard DC are what are currently available for purchase.
Be well...

Flow between oracle manufacturing and oracle financials

Hi,
can any one briefly describe what is the flow between oracle manufacturing and oracle financials modules.
if any body has documentation pls send me.
thanks

Hi Brain;
Please check below:
How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS
http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-connect-to-tibco/doc/how-to-connect-to-tibco.html
By the way i can not find any specific note TIBCO and Oracle Financial. I suggest log a SR and confirm your issue wiht oracle upport
Regard
Helios

What's the difference between SharePoint 2013 and Office 365 Team Sites?

Hi there,
What are the differences between SharePoint 2013 and Office 365 Team Sites?
If I would like to develop a professional corporate website with SharePoint technology (because the company allready uses Office 365), do you recommend using SharePoint 2013 (in the cloud) or Office 365 Team Sites? And why?
Thank you very much!

You cannot make SPO Team Sites anonymous-enabled, therefor they're a moot point for a public website.
While slightly out of date, take a look at this:
http://nikpatel.net/2013/01/17/new-sharepoint-2013-wcm-features-are-not-available-in-sharepoint-online-2013/
http://technet.microsoft.com/en-us/library/sharepoint-online-content-service-description.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

What are the major differences between hana 2013 and 2014 release

Hi Guys,
I am planning to learn sap hana and write certification exam. As sap release new platform 2014, may I know what are the major deference between 2013 and 2014 release or its just enhancement pack on top of 2013.
Please help me....thank you in advance.
Regards,
Tapas

Hi,
Good morning and greetings,
Please use the following link
http://solutionbrowser.erp.sap.fmpmedia.com
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Creating a Web Service to handle flow between BPEL process and XML Gateway

I am new to Web Services. I have never created one, yet I have the task of designing the following for a project.
Any help as to what steps I need to take would be very very helpful. There is a lot of information on XML, SOA and WSDL out there that it can get very confusing, and sometimes you just need someone to point the way
What I need to do is create a Custom Send and a Custom Receive Program (both web services) handle the message flow between an Enterprise BPEL processes and a Deployed XML Gateway.
BPEL compresses this XML business object document (for faster transmission), and sends remotely to this Custom Receive web service, which in turn calls a decompress java program and then send the document to the XML gateway inbound web service.
The Custom Send web service does just the opposite. It needs to take the business object document from XML gateway, call the compress java program and then send to the Enterprise BPEL.
In a nutshell...these Custom Send/Receive Web services handle the message flow between the Enterprise BPEL process and the Deployed XML Gateway.
What I need help on...
-Creating this in JDeveloper- where do I get started?
-How does a web service receive a compressed file sent to me via BPEL? Does it just sit there waiting for it?
-Is this a synchronous or asynchronous design?
-Will this be 2 web services (Send and Receive) or do I make 1 with 2 functionalities
-How do I call the java compress/decompress program within the web service? (this java function is already created and ready to be called)
-Is this decompressed business object file an XML schema and an XML message? Or just a message?
-I need to send this to the XML Gateway Web Service to load. How does that work?
-I have a Generic XML Gateway WSDL file...I assume I need to take all the info I get and map it to this template? Is this true? How do I do that?
Like I said, any help would be appreciated. Links answers to my many questions would be fabulous.
-Jason

If you are talking about simple XML transformation of the SOAP payload between the client calling your service and the final destination of the message you are routing, the ESB approach may be a better fit.
If you have more complex transformation in mind, with major processing and rework of the message in the intermediary, you may be better of with using the POJO approach. Write your service and embed a callout to the other service in your implementation. If the two services share the same Java Model, you may even be able to re-use the same Java Bean.
To get SOAP Element instead of Java bean, you just need to use the noDataBinding option with either genProxy and topDownAssemble (or assemble). See the WS-Guide [1] for details. Chapter 18 will give you all the details about the different WSA command line parameters.
Hope this helps,
-Eric
[1] http://download-west.oracle.com/docs/cd/B31017_01/web.1013/b28974/toc.htm

Process flow between edit ,renderlistitem and show form in XML form builder

Hi all ,
i'm building from in xml from builder . i'm confused with the process between edit ,renderlist item and show froms .can any one please explain me the Process flow between those
thanks,
rajeev.

Hi Rajeev!
There is no process flow between those forms. They are seperate views of the same document, nothing more.
The Edit form is always used if you create or edit a xml document based on the form.
The renderlist item form is used if more than one XML document is shown, for example in a list.
The show form ist used if the document should be displayed in full, eg by clicking on an XML document in a list.
It is even possible to add more custom forms and display them. If you "preview" an XML document, you get the choice to display the document with all display forms available (default Renderlist item and Show). If you watch the URL when previewing a xml document you'll see an URL parameter selecting the form to show.
Regards,
Jürgen

Sync calendar and contacts between Outlook 2013 and iPhone 4

I am trying to sync my calendars and contacts between Outlook 2013 (Office 365 Home Premium) and my iPhone 4 (iOS 7.0.4). I have created a confusing mess for myself and do not recognize all of the calendars that appear in Outlook or the iPhone. I
abandoned the use of the iCloud because the iCloud calendar invitations my coworkers received in MS Outlook are too confusing to read.
Is there a proven process for syncing when i add a new contact or calendar event in one device so that it shows up simultaneously in the other? If the process is too laborious, is there an Outlook add-on?
I have tried the Exchange ActiveSync but I can't get this to work smoothly. I can't move recurring calendar events that started in the past. Further, I have to navigate 2 separate data files in outlook to find the right calendar or inbox.
I am not sure if Exchange and Exchange ActiveSync are the same or not.
Additionally, this is a private domain address (my work email).

Hi,
Basically, Exchange ActiveSync and Exchange are two different sets of protocols, but both of them have the feature to sync contacts and calendars between different devices.
If your company provides an Exchange account for you, just setup it in Outlook Client, it will sync the contacts and calendars between clients and the Server.
If you have an Outlook.com(Hotmail) or any other email account that supports Exchange Activesync, just set it up in Outlook, the contacts and calendars will also sync.
As for iPhone, just make sure it also uses the same protocol.
If there's anything wrong with the account sync on PC, rename the current data file to ".old", let Outlook create a new one to sync, or we can create a new profile to setup the account:
http://support.microsoft.com/kb/829918/en-us
Regards,
Melon Chen
TechNet Community Support

Stop the Sales Orders flow between R/3 and CRM systems.

Hello Experts,
I am facing one middleware related issue.
I am creating a quotation and Order in Crm system an those are replicated to R/3.
But I am creating some orders in r/3 and those are alos replicating to CRM, I want to stop the flow of Orders between R/3 and CRM.
Please let me know where I have to do the changes.
Thanks

Hi,
What Debolina suggests would stop flow of Orders from CRM to R3.
But what i learn from your post is :
you wanna stop Orders flowing from R3 to CRM.
If m coorect in above, then teh solution for you is different:
You have to filter out the orders.
Goto: R3AC1
Select object : SALESDOCUMENT
Goto Filters tab and set the filter as desired.
This would stop the flow of Orders from R3 to CRM
Kindly reward with points in case helpful
Sharif.

Html flow between mobile devices and server?

One last question. Sorry for flooding this board.
I need to write a paper on oracle lite for my database class...
My focus has to be on the communications between the remote devices
and the server.
As I can't seem to get Olite installed and working, I was wondering if one
of three things:
1) Is there an apnote that explains the protocol flow between devices and
server?
2) Is there a public, open, olite server that a remote client could connect
to? (I know, not likely)
3) if anybody had some non confidential ethereal traces of the html flow they could offer?
Anybody have any other ideas to offer?
Thank you,
Mike

Hi Mike,
There are all kinds of white papers out for this information.
http://www.oracle.com/technology/products/lite/TWP_Lite_10gR3.pdf
There isn't an open public olite server for someone to connect to. Although that is a good idea.
What type of HTML flow are you looking for? Sync, Webtogo/OC4J? The Webtogo/OC4J containers work like any other Servlet containers. The sync is the blackbox. Page 6 of the pdf has a little diagram showing what happens during a sync.

Logical flow between User forms and workflows

Hi,
I want to know the logical flow among jsps,UserForms and workflows in IDM.
This may appear as a silly quest. But I want to know how exctly the workflows are getting excuted when we click the buttons on the forms....
For eg While creating the user after gving the user details in Tabbed User form when we click on save how it is calling Create User Workflow....
where is the link and how its happening.....
If any one know this please reply me....this a quest remaining in my mind since so many days....
Thanks in advance....

I dont think, there is any xml codes in any of the forms for calling workflow. One needs to render a form for any workflow. Whenever you hit new User , the create user workflow gets initiated and the form and the default form for create user is Tabbed User Form. activities and forms are mapped according to the authorisation level. If you create any Admin role, then we need to specify a form for the admin's capabilities. I guess for configurator , to create a a new user, the form has to be Tabbed User Form by default. For a custom Lanch user process, one needs to include a form along with the workflow. We can do that. Thats what I know till date.
Thanks,
Manila

Mail flow problem between Exchange 2013 and 2010

Hi,
we have 4 exchange 2010 servers, 2 mailbox and 2 hubcas. we are migration to 4 exchange 2013 servers, 2 mailbox and 2 hubcas.
exchange 2013 user can send and receive emails from/to internet without problems, but when i try to send email to internal users located to 2010 server i have no success.
i also can receive from exchange 2010, so the problem is only i cannot sent emails to exchange 2010 users.
is this a problem with receive connector of exchange 2010 or something else ???

one more thing, when i open exchange queue i got this error:
451 5.7.3 cannot achieve exchange server authentication. attempted failover to another host but that did not succeed. either there are no alternate hosts, or delivery fail
For this error refer to the following article:
http://support.microsoft.com/kb/979175
Thanks, MikeV MCSE 2012

Mail flow in exchange 2013 and lotus domino coexistence

scenario: Exchange 2013 CU3 running Windows 2012. coexsisting with lotus domino 8.5.1
there two cas server and two mailbox server. users migrated using quest tool. distribution groups are still lotus notes.
in one of distrbution group which containing around 5 users, 4 users are migrated to exchange 2013 cu3 one user still in lotus notes. the above mentioned distribution group members complaining they are not reciving mail which address to distribution group.
I used exchange shell for message tracking and I found below entries.
in source field the entry is mailboxrule i have verified there is no mail box rule in the user front
in eventid field the entry is receive
in the sourcehostname its show exchange 2013 server.
recipientstatus {unknown}
Since the distribution group is in lotus notes I want find event which sates that the message or exchange 2013 forwarding or checking the members of DL .
which field will give the required details currently i am finding anything.
please suggest

Thanks.
In current scenario we cant create any dl in the exchange 2013 front. I want to know what this mean
recipientstatus {unknown}.
secondly I have followed the link below
http://social.technet.microsoft.com/Forums/exchange/en-US/194c0bd8-9c77-4750-9f47-944451f2dd40/message-tracking-in-large-distribution-list-challenges-please-help?forum=exchangesvrgenerallegacy
I ran the below command:
Get-MessageTrackingLog -MessageSubject
"messageTrack" |select eventId, sender,@{l="recipeints";e={[string]($_.recipients)}}|ft
-Aut
oSize -Wrap
I am getting enventid, sender field details but recipeints field is empty.
Please suggest.

Data flow between R/3 AND APO

How the chars and Navigational attributes are flowing in-between the R/3 AND APO ?
Why we need to maintain the chars and nav attrr in APO? . Any input will be highly appreciated
Thanks

Hello Nick,
Navigational Attributes : Characteristic attributes can be converted into navigation attributes. They can be selected in the query in exactly the same way as the characteristics for an InfoCube. In simple words an attribute is a characteristic that is logically assigned and subordinated to another characteristic. Navigational attributes offer a way to plan multiple objects while achieving optimum system performance in Demand Planning.
e.g. Costs of the cost center drilled down by person responsible: You use the attribute u2018Cost Center Manageru2019 for the characteristic u2018Cost Centeru2019. If you want to navigate in the query using the cost center manager, you have to create the attribute u2018Cost Center Manageru2019 as a navigation attribute, and flag it as a navigation characteristic in the InfoCube.
Characteristics : A planning object such as a product, location, brand or region.
The master data of Demand Planning or Supply Network Planning encompasses the permitted values of the characteristics, the characteristic values. Characteristic values are discrete names or numbers . For example, the characteristic 'location' could have the values London, Delhi and New York.
Regards
Rahul Chitte
Edited by: Rahul Chitte on Aug 30, 2010 5:07 PM

Software Distribution Flow between SCCM (2013) and BMC (8.1), using ﻿Orchestrator

Similar Messages

Maybe you are looking for

Software Distribution Flow between SCCM (2013) and BMC (8.1), using Orchestrator