Software doesn't seem to work in Bootcamp partition

I recently created a 32GB Bootcamp partition (FAT 32) and installed Win XP Pro SP2 in it. The Windows installation completed successfully.
After this I installed Palm Desktop 4.6.2 to enable me to use my Palm Treo 650 handheld and sync it with the computer. I also installed Handbase Pro 4.0 because I have Handbase databases on my handheld. When I tried to sync, it gave me an error saying "Unknown USB device". The attempt to sync also caused the Palm Desktop software to hang. After I closed the application and tried to restart it, it refused to start saying "Palm Desktop has encountered an Unknown error.......". Thinking that the application software had been somehow corrupted I thought I would do a re-install. However, when I try to uninstall Palm Desktop it refuses to uninstall it saying "Error 1404. Could not delete key \Software\Classes\.prc. Verify that you have sufficient access to that key, or contact your service personnel".
In addition to this, I installed McAfee Anti-Virus Enterprise 8.5, thinking that the Windows partition would be more vulnerable to viruses. The install went smoothly but the application hung after going halfway through the Update process, specifically when it was downloading the latest .dat files.
Internet Explorer seems to be working but intermittently gives errors when downloading files.
Finally although I set the Mac partition to be the default startup disk, using the Boot Camp Control panel, the computer kept on starting up in the Windows partition until I pressed the Option key during a Restart.
I have not yet installed other software in Windows, because there seem to be myriad problems using the software I already have.
I would be very grateful for pointers regarding solutions to these problems. I think it would be relevant to point out that I have recently shifted to a Mac form a PC and am not very familiar with the Mac environment. Are these sort of problems common with Bootcamp?
Thank you in advance.
Javed

First and foremost, XP SP2 is EOL on security updates. If possible I would strongly recommend Windows 7 instead.
When you install XP, or Windows, fully upgrade first, then add Apple drivers, get it working fine. They say that 15 minutes is enough time to compromise a default XP install, and used as a "honey pot" to test what malware is circulating.
I don't know about McAfee (I guess Google must) but for now or next time, try with just MS Security Essentials, free and gets high marks, it works.
There are probably a lot of things to learn on a daily basis.
But make sure what you install is current and compatible. And have backups and restore points so you can go back to earlier stable system state.
And yes seems like the Windows partition or OS is not functional.

Similar Messages

When using Acrobat - Adobe Software License Agreement Pops Up - Accept doesn't seem to work - Application then automatically closes when existing the License Agreement pop up - Whats going on?

When using Acrobat - Adobe Software License Agreement Pops Up - Accept doesn't seem to work - Application then automatically closes when existing the License Agreement pop up - Whats going on?

Please try :
Software License Agreement reappears after you click Accept
Adobe's "accept license agreement" pops up way too much and ruins UX
Repeatedly asked to accept license agreement
Hope it helps you.
Regards
Rajshree

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts. I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly i

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7

AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

Saving tabs doesn't seem to work anymore for me in 4.0.1

Since I've installed FireFox 4.0.1 the saving of tabs doesn't seem to work anymore. When I press exit I only receive the notification "are you sure you want to close x tabs?". When firefox or my computer crashes the tabs are saved, but when I try to exit myself I can't. Can someone tell me how to solve this?

Hi, I have a similar problem. When playing music, the screensaver has stopped working. Instead all I get is a white screen. I have checked all the settings and they are ok. The photos show and the albums show will work. But as soon as I switch back to slideshow I get the white screen back. It is even like this in 'Preview'.
Have you solved the problem now. If so, how?
Anyone else affected? I took a new software update to the Apple TV two days ago. Could this be the problem?
all advice welcome
regards
Michael

Email Security Plug-in - Doesn't seem to work with right click or save and send

I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
Starla

Andreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Added Devices' section. 2. Selecting any task specific product
   selector and clicking on 'My Added
    Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
         User ID (Cisco.com ID used to download software)
         Contact Name
         Company Name
         Contract Number
         Product ID
         Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

Bridge Offset Nulling Doesn't Seem to Work With SCC-SG24

Does anyone know if the DAQmx "Perform Bridge Offset Nulling Calibration" vi works with the SCC-SG24 modules? We have used our NI-9237 module in the past to acquire dual-channel load cell (thrust & torque) measurements, and calling that vi does a fine job of zeroing out the values before applying the load. However, it doesn't seem to work when we try to take the same measurements using an SCC-SG24 module.
We are able to zero the values manually, by using the nulling resistors and potentiometers in the SCC-SG24. But, whether the nulling resistors are installed or not, we are not able to zero the values using the "Perform Bridge Offset Nulling Calibration" vi. Running that vi does induce a significant offset in the values, but it is not the correct offset needed to bring the values to zero. For example, with no load applied, a torque reading before running the vi may be +1090 in-lbs, and be "zeroed" to -465 in-lbs after running the vi. Running the vi multiple times (to check repeatability) always brings us back to approximately -465 in-lbs.
An additional issue (not sure if it's related or not) is that if we try to run this vi to offset just one of the channels in the task (such as just thrust, but not torque) it will still induce a small offset in the other channel, which doesn't seem right.
I guess I'm not clear on whether the subject vi is performing an operation on the hardware, the software, or both, so I'm not sure whether the SCC-SG24 modules may not be compatible with this vi?
Thanks for any help you can provide.

Hello Dhruser1,
I think that the DAQmx Perform Bridge Offset Nulling Calibration should work for the SCC-SG24 module. Take a look at this article: Removing Large Initial Offset for Load Cell or Strain Measurements with SCXI-1520 or PXI-4220 in particular it mentions that using this VI in addition to the auto zero can introduce an offset. If you're doing both these is likely the cause.
Also, when you specify specific channels using the channels input are you also setting the "skip unsupported channels to false? If not this may be why it affects other channels.
I hope this helps, and if not please feel free to post back with an update after trying these things.
Cheers,
Brooks

SQL Batch doesn't seem to work; How to eager-fetch related objects?

Hi,
I have two technical questions with Kodo.
1. SQL Batch doesn't seem to work. I have tried batch size of -1, 0, 1, 25.
But the performance from batch creating objects is not affected by batch
size.
kodo.jdbc.DBDictionary: BatchLimit=25
2. How to use custom fetch groups to eagerly fetch related persistable
objects? Example only showed attributes, not relationships.
Enviroment:
* Kodo 3.1.0 RC1
* Oracle 9i release 1.
Qingshan Luo
Senior Software Engineer
Open Harbor
1123 Industrial Road
San Carlos, CA 94070
Phone: 650-413-4251
Fax: 650-413-4298

try poracle 10g driver. At least they fixed terrible CLOB bug may be batch
to. BTW 9.2.x has problem with batching with deferred constraints so be
careful
"Greg Campbell" <[email protected]> wrote in message
news:c3dmnu$rmj$[email protected]..
>
"Qingshan Luo" <[email protected]> wrote in message
news:c3dg7q$mdl$[email protected]..
Hi,
I have two technical questions with Kodo.
1. SQL Batch doesn't seem to work. I have tried batch size of -1, 0, 1,25.
But the performance from batch creating objects is not affected by batch
size.
kodo.jdbc.DBDictionary: BatchLimit=25You may be running into a bug in the Oracle 9.2 driver. That driverdoesn't
reliably give update counts when using batching and prepared statement
caching. By default, Kodo will turn off batching. You can manuallyenable
batching by setting the BatchLimit on your DBDictionary, as you've done.If
you do this, though, you may want to turn off prepared statement cachingby
setting MaxCachedStatements to 0 (see
http://www.solarmetric.com/Software/Documentation/3.1.0RC1/docs/ref_guide_dbsetup.html#ref_guide_dbsetup_builtin).
>
2. How to use custom fetch groups to eagerly fetch related persistable
objects? Example only showed attributes, not relationships.You can find information on setting up eager fetching of relations at
http://www.solarmetric.com/Software/Documentation/3.0.3/docs/ref_guide_
perfpack_eager.html
Basically, you'll need to add the relations to your fetch group, and
set the eager fetching mode.
Enviroment:
* Kodo 3.1.0 RC1
* Oracle 9i release 1.
Qingshan Luo
Senior Software Engineer
Open Harbor
1123 Industrial Road
San Carlos, CA 94070
Phone: 650-413-4251
Fax: 650-413-4298

How to reset the iPad - the Location Services doesn't seem to work?

How to reset the iPad - the Location Services doesn't seem to work?
I can not get NFL Game Pass or Siri to work???

Well you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).

How do you reset/repair javascripts? Enabling doesn't seem to work

When I enter various websites, they list an advisory message that I must enable javascripts in order to use their sites. When I enable javascripts from the contents section from tools in firefox, it doesn't seem to work. How can I reset or repair the javascripts function in the firefox program to allow me to access and use various websites?

The website you mentioned http://www.arbitersports.com is opening fine (see attached screenshot) without any error messages or warnings on my Win Xp & Firefox 9.0.1..
-> [[JavaScript]]
* http://kb.mozillazine.org/JavaScript
-> [[Using the Java plugin with Firefox]]
-> Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
-> Update Firefox to the latest version (9.0.1)
* [[Updating Firefox]]
-> Update All your Firefox Plugins
* https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
* Restart Firefox

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

Port mapping doesn't seem to work - AEBS

I have a dsl connection to an Alcatel SpeedTouch 530 modem, linked via ethernet cable to the WAN of my AEBS, which shares the connection to three Macs and 2 Win boxes. I want to connect to aMule and get a High-ID. In the wiki.amule.org FAQ it states that to achieve this, I must use port mapping behind a firewall, and map ports 4662 (TCP) and 4665 (UDP) to my machine (which, after reading http://discussions.apple.com/thread.jspa?messageID=607426&#607426, I have assigned to AirPort TCP/IP address 10.0.1.201, by the way).
Unfortunately, it doesn't seem to work, and I'm still getting the annoying 'low-ID' warnings on aMule.
Following some advice on the aMule forum, I mapped port 80 and verified that the WebServer is accessible inside the wLan, if that's of any help.
Thanks, people.

Hi Tim, a couple of questions:
1. If I go ahead and un-check the 'Distribute IP
addresses' box, how will the three Macs and two Win
computers on this wlan be affected? Do we still have
access to each other's shares, and do we still access
the internet through the AEBS?
Once you turn off the 'distribute the IP address box' then your alcatel router will then distribute ip adresses and your macs and wintel boxes will still be on the same network and using the sharepoints will remain the same if you setup the shares using the bonjour names.
I am making an assumption here in that your alcatel box is setup as a NAT router and not as a Bridge.
2. Do I just give a static internal IP to my own
powerbook, or to all the above computers?
You only need to give a static ip to the mac your doing the port forwarding to. So that is the mac that is running the p2p software, infact you would do the same for any computer on the LAN that would run a server, such as a webserver, email server etc.
Many thanks, as always.
You are welcome.
PS I had the impression that the basic idea of what I
need to do to successfully map the ports to my Mac
was to map ports from the DSL modem to the AEBS, then
from AEBS to my Mac. Is this not right? Or is this
another kind of solution to the same problem, albeit
slightly more complicated to your suggestion above?
If the alcatel modem was just behaving as a modem then you would use the AEBS as the NAT device and do the port mapping on that. However the Alcatel modem is also a router.
If you setup up your alcatel router as a bridge you would then use the AEBS as your PPPoE client and then port mapping would work.

Wacom Tablet doesn't seem to work all of the time?

I have a Wacom Intuos 3 tablet, not more than a year old. I recently installed it onto my Macbook Pro and it worked fine, but when I unplugged it and came back to work with it later, it doesn't seem to work. The mouse doesn't respond to where I click on the pad.
So, I've reinstalled this a couple of times and was able to make it work perfectly, but today when I went back to work in photoshop, it doesn't seem to be responding again.
Does anyone have any tips? I know that Leopard likes you to eject USB devices instead of just pulling them out of the slot, but I don't see anywhere to eject it.
Does anyone know what's up?

Downloaded a driver from website, tablet works now.

Safari on my iPhone 6 running 8.02 doesn't seem to work right. Some Java scripts don't show correctly and they do on other browsers I have downloaded. I tried almost everything and nothing seems to work to fix it. Please help.

Some websites like the one of my college uses JavaScripts and they seem to load correctly to a certain point but then not really. For example in one it would say select an option from the left menu. And I do it hut nothing happens. But when I go to the same website in another browser on my phone. The JavaScript works completely and allows me to see whatever I was clickig on that menu. I have seen that there are other websites being affected too. I tried clearing my cookies and data. even restarted my phone. And doesn't seem to work. I don't know how change the configuration any more to make it work like normal. At first I thought it was my school's website but it never got fixed. And now I realized is my safari browser! I wanna keep using it since I am really familiar with It. If someone knows how to fix this please let me know!
Thanks

You can reset the SMC and see if that helps. If it's a unibody or Retina, follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Software doesn't seem to work in Bootcamp partition

Similar Messages

Maybe you are looking for