Software down load for HP Photosnart 7350

need to find a driver download for my HP photosmart 7350     I have Windows 7  Home  Premium 
This question was solved.
View Solution.

Hi Rowingscot,
There are no downloadable drivers for Windows 7, a basic functionality provided by using an Alternative driver.
Please follow the steps below in order to configure the printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&cc=us&dlc=en&lc=en&os=4062&product=728...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • New software down load for iPad

    I have just tried to download the new software update for iPad and it gets to 99% of the download completing and then stops with an error of 3259 and a box stating
    there was an error while trying to download your software for iPad the network connection timed out.
    my network is fine.
    Does anyone have an idea, or experienced the same thing. i think the software only cam on line today

    You can also try to download the update directly here:
    http://appldnld.apple.com/iPad/061-8801.20100811.CvfR5/iPad1,13.2.2_7B500Restore.ipsw
    and check the size, it should be 479'001'595 bytes
    enjoy your magic machine

  • Why did a ton of adware come with your Firefox down load for your browser? It corrupted my computer and crashed it several times.

    I down loaded firefox from your site and all of a sudden all this adware popped up on my computer. I thought I visited a bad site for a minute and tried figuring it out from there. I was wrong. It came with your down load for firefox. Did you intentionally add that to your browser? Or was your site hacked? Adware Linksy was what I found and it went ape on my computer too. I used to use Firefox because I loved the versatility of it. Now I have to use Chrome. I am not happy. Firefox was what I recommended to everyone and recently everyone I know has been getting the same issues.
    Is there a reason for all this?

    Are you sure you downloaded Firefox from the official link?
    https://www.mozilla.org/en-US/firefox/new/
    The download link there should not be loaded with adware. If you do not download from the official site, some sites will package Firefox with PUP (potentially unwanted programs). In these situations you should uninstall applications that look suspicious, including Firefox, and run a virus scan after removing them. Then download Firefox again from the link above (or if you prefer a different localization of Firefox: https://www.mozilla.org/en-US/firefox/all/)
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • What version do i down load for an ipad?

    what version of adobe flash player do i down load for an ipad?

    There is no Flash Player for iOS; Apple does not allow it.

  • Standard pf-status and program name to down load for alv

    standard pf-status and program name to down load for alv
    Regarding
    anil

    Hi,
    SAP Program for standard PF-Status is : SAPLKKBL
    PF-Status : STANDARD Standard for General List Output
                      STANDARD_FULLSCREEN Standard for    general   List Output in Fullscreen Grid
    Thanks,
    Kishore

  • Movies down load for Pakistan,how it possible?

    Mac app store does not offer rent or purchase movie down load for Pakistan, where as if choose the other region/country then it has but for payment through credit card a valid address of billing is equired. Can any one help me to convince apple to up grade the Pak Mac App Store so that I may enjoy the movies.

    The Mac App Store does not offer movies for download, only iTunes.
    Click here > iTunes Store: Which types of items can I buy in my country?
    Pakistan is not listed under Video Content. It may be a digital rights management issue.
    Your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • I could not find firefox 3.6 free down load for my mac 10.4 OS.

    I am working with Mac and operating system 10.4.11
    I reload my system software but could not down load Firefox 3.6.15 version as whereever I go on internet, it shows Firefox 4.0.
    I can not use ver 4.0 as I am using OS 10.4.11 and I can not afford to buy new mac with system 10.5 or 10.6.
    I need to down load browser firefox 3.6.15 so I can use my internet on Mac .

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • What to down load for Panasonic DVX-100A to work with PPro CS6

    DVX-100A Panasonic , wont connect to my Premiere Pro CS6. help  what should i down load...

    1st
    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    2nd
    According to http://www.amazon.com/Panasonic-AG-DVX100A-Proline-Camcorder-Optical/dp/B00024YOGU that is a miniDV tape camera
    So... what kind of Firewire port does your (unknown) computer have?
    3rd
    http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html may help
    -and Windows http://forums.adobe.com/message/4708997
    4th
    If your unknown operating system is Windows, read below for alternatives
    I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
    I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

  • Down load for HP model 3052A printer

    I am trying to find a down load driver for our HP desktop model 3052A all in one printer, so I can hook up to my new HP 2000 notebook. I cannot finr any, and when I do the page is not there any longer. Does any one out there know how to help me ?  I do not know where our install disc for the printer is, thats the problem ..

    Hi,
    No "HP desktop model 3052A" around that why you can't find it. I believe it ts "HP Deskjet model 3052A". Please use the following link:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?cc=us&dlc=en&lc=en&product=5061073&
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Delta Down Load for Materials- R/3 to CRM

    Hi CRM Gurus
    I have set up MW to do intial load for material masters and have been able to download products after maintaining all pre-reqs (config etc)...
    Now I want to turn on delta download from R/3 to CRM for materials...I have tried CRM request R3AR2, R3AR4 to set up the request and also execute the request...
    In the montitor tcode, it says its complete but if I execute the SMW01, I do not see any incomming Bdocs for R/3 materials...I have checked SMQ1 and SMQ2 and do not see any entries there either..
    On the same note, if I re-run the intial load, my new material numbers appear in CRM..
    Please adivse on what might be wrong with delta replication...
    Regards
    Jai

    Hi Jai,
    First thing is that you do not need to do any extra settings for the delta load, the momenet you initiate the initial load R/3 maintains the event in table TBE31 for that perticular object and delta automatecally gets activated. So to get the new material in CRM you need not run the request load rather it should come automatically. If not the you should have some stuck queue in CRM inbound with the queue name R3AD*. Also you should get the corresponding BDocs in SMW01.
    If this is not the case then explain exactly what is happening in your system. Do you have any filter for the object MATERIAL?
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • Palm desktop software down load driver - Palm T/X

    Tried to sync on my new computer - Windows 7.
    It appears the Palm software I got on line is not working with Windows 7.
    Can you you pls attach the download software to my email.
    A Odunlami MD.
    352-433-2633
    Post relates to: Palm TX

    Hello aferhourspeds and welcome to the Palm forums.
     Please take a look at this thread.  It should point you in the right direction for picking a solution that will work for you.
    Alan G

  • I need to down load for mac 10.4 it was there last week now i can not find it

    help with download for mac 10.4

    As of Firefox 4.0 and newer a Intel and OSX 10.5+ is required.
    For the old OSX 10.4.x and also PPC Macs the last version from Mozilla to work is the 3.6.* as the current version can be found at http://www.mozilla.com/en-US/firefox/all-older.html
    Since you are using PPC there is a third-party option for Firefox 5.0 at http://code.google.com/p/tenfourfox/downloads/list as the tenfourfox.com is down at moment. There is no actual 4.0.2 or 4.0.3 releases and the 6.0b1 are test builds. I suggest to use Firefox 5.0

  • TS3297 Hi I was down loading IOS 6 to my iPhone through I tunes got as far as processing file and the error message of error 5000 came up and said I would loose everything off my iPhone if I proceeded. I managed to down load for iPad fine. I have an iPhon

    Just a beginner here first log in. Question is what do I do if I get an error message 5000 iF you progress you loose every thing - was trying to download IOS 6 onto my iPhone 4 and got to the very end when it ways processing file. Thank you

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • I have airport extreme and have windows 2003 what program do i down load for airport utility

    can any one help i tried one but was for windows 2007 no good need it for windows 2003 i have airport extreme just bought it today

    Ok thanks for the info - I am only familiar with Windows so I am going to suggest a typical setup using your Toshiba laptop - you can then use the network with any device - tell me if this works for you.
    Determine which version of Windows that your Toshiba uses.
    Go to http://support.apple.com/downloads/#peripherals
    You will be downloading Airport Utility
    Download version 5.6.1 for Windows 7 or
    Download version 5.5.3 for Windows XP or Vista
    Once you have done this let me know if you will be using this Extreme as your primary router after your modem or is your modem also acting as a router or do you have another router anywhere in your network

  • Don't believe that the software down loaded correctly

         I have downloaded a Trial Version of Adobe Acrobat XI for Mac at the suggestion of the support guy I spoke to (long story why).   Anyway he told me that I could go to the web site and retrieve the SN for that package, which I did.   At some point it asked me to provide a SN if I had one, which I did.   Yet the package does not open like the one on my Window Based computers.  I am not good enough with the MAC to take a picture of the screen, but can tell you it is a small screen with two columns.  One site is "Open a Recent File" the right hand side is "Select Task".  Do you believe this is the correct way for this package to open?

    You mean the startup screen? Sounds about right, but the menu bar should be somewhere there as well... Screenshots on Mac are done using Cmd+Shift+3...
    Mylenium

Maybe you are looking for

  • CDN does not work - tried twice

    This is weird. I've done this many times before but I can't create a CDN endpoint anymore. So I have a storage account, for example, myacc.blob.core.windows.net. And I have *public* container xslt. And there's an image inside it - logo.png. If I use

  • User-Exit - MIGO How to get the Number of Material Document

    Hi everyone!! I'm looking for an user-exit after saving in MIGO transaction. I need the Number of Material Document (MKPF-MBLNR) to generate an IDOC. Does anybody knows an user-exit to get this number? Regards, Rubens Kumori Edited by: Rubens  Kumori

  • Invoice Correction Request - RK

    I created an invoice correction request with reference to an invoice. Changed the quantity on it from 3 to 1. So the customer will need to pay less than what they were supposed to pay. No amount has yet been received from the customer. Now where do I

  • Problem regarding the transmission of video Through TCP/IP acquired from USB camera

    I want to transmit video using TCP/IP protocol acquired from USB camera. Acquisition is done well but when I place the TCP VIs in the acquisition VI then the trouble begins and I can't even get the video in that particular VI which was acquiring vide

  • View the Resource Performance in Resource Center

    Hello. I use ProjectServer 2013. I always check the resource's capacity and plan in Resource center. But There is no information about resource performance in Resource Center. Is it possible to view the all resource's performance(actual work) in Reso