Software download for hp 7000 printer on windows 7 64-bit does not complete

Hi HP. I was asked to download a full software for this printer hp 7000wide format on windows 7 64-bit, this i try to do with this file download- H8t5ubCr.part. It downloaded 183 MB out of 219 MB with this message PART thus the file cant open. What can i do to continue with my download or to open the file. And, is it possible for me to have just the software excluding driver as i already have the driver installed on my system. Pst. Copeland

Hi,
Follow the insntallation again till the license agreement step.
Click the 2nd link - Internet connection Usage Settings and select No, Thanks for botht of the listed options.
Confirm the changes, accept the terms and proceed with the installation which should go further that step now.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

ITunes 10.1.1 for Windows (64-bit) Does Not Run After Installation

I recently upgraded my laptop to Windows 7 and downloaded the 64-bit installer (iTunes64Setup). Although I recieve the notice that it was installed, when I start it up, I receive the "iTunes Library.itl cannot be read..." error message whenever I try to start it.
I have uninstalled the program, deleted the original setup file (iTunes64Setup), downloaded it again and re-installed it twice with no success.
Is there something I am doing wrong? Any assistance is greatly appreciated.
Thanks,
John

Finally got it installed and running.

Hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer?

How & where to get the hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer? The full hp solutions centre software features such as photo editing, etc that can be utilized for windows 7(64 bit) with photosmart 3110 printer

Hi Nogot7, you will have to share 3100 over your network.
On the XP computer .....
Open Printers and Faxes.
Right-click the printer you want to share, and then click Sharing.
On the Sharing tab, click Share this printer and then type a share name for the shared printer.
On the Win 7 computer ....
Go to Devices and Printers
Add a printer
Add a local printer
Select Create a new port:
Select Local Port for the Type of port:
Enter the network name of the XP computer ie. \\XPcomputername\share name
Install the 3100 driver when prompted (DO NOT use the CD but the Win 7 built in driver)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

TS3147 Software download for HP Photosmart D6100 series 4.0.2 for Mountain Lion 10.8.4?

Does anyone know how to get the download software for HP Photosmart D6100 series *
4.0.2 for Mountain Lion 10.8.4? Apple says it's not available from their website. :o(

There is no software download for this printer. It will all come through Apple Software Updates. Most likely you are getting that message because the list of compatible devices needs to be updated. You can find out more about this and how to correct it from the links below. Let me know how it turns out.
OS X v10.8 Mountain Lion: Installing and Using the Printer on a Mac with Mountain Lion
Basic Printer Troubleshooting Steps for Mac
I am a printer tech for HP.

EStore Software Downloader for PC

Hi,
Can someone help me to install the eStore Software Downloader for PC? When I run the said application, it's asking me to login my CEC Login but it always says "CEC User ID &/or password entered incorrectly or not found in the system". See attached file.
Thanks!

The first thing to try is this user tip:
https://discussions.apple.com/docs/DOC-3551
It suggests repairing Apple Software update.
If it is not listed under control panel>>Programs and Features then you cant try a repair.
So if you can't repair try this:
This problem can often be fixed with the Microsft Installer cleanup utility.
Unfortunately the Microsoft Installer Cleanup utility has been withdrawn by Microsoft because of compatibility issues with Microsoft Office so you will need to find a copy elsewhere – the installer is msicuu2.exe. You need version 3.
Google msicuu2.exe download
mydigitallife or MajorGeeks in the above search have a copy of version 3
Check for malware before installing it.
Download a fresh copy of iTunes
http://www.apple.com/itunes/download/
Save the file on your PC.
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista/Windows 7
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
If you get permission denied error, Try Run as Administrator – an option if you right click on the program.
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did *not* uninstall, look out for entries that start All Users that are blank entries or have numeric entries that look like version numbers
restart your PC and try installing iTunes
If you want Quicktime, that has to be installed separately
http://www.apple.com/quicktime/download/win.html

Get Software Downloads for UC520

I have a UC520 (I know it's EOL long ago) but I was wondering if it is still possible to buy a support contract so I can have access to software downloads for IOS/CME/CUE?
I would like to update the CUE to a newer version.

I realize the Uc is EOL but there are still downloads available which I cannot get access to without a contract. What I'm asking is if there is any way to access these files.
https://software.cisco.com/download/release.html?mdfid=277641082&softwareid=282786567&release=10.5&relind=AVAILABLE&rellifecycle=&reltype=latest
https://software.cisco.com/download/release.html?mdfid=283671889&flowid=45715&softwareid=282774361&release=8.6.10&relind=AVAILABLE&rellifecycle=&reltype=latest

Oracle gateway for Oracle 10g DB on Windows 64 bit server

Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.

yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database?

I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

I try download for premier pro and after affects but says page not found what happens?

I try download for premier pro and after affects but says page not found what happens?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Windows Media Player does not recognize new downloaded songs

I have a Pavilion a4310f Prod Nr: AY014AA-ABA running Win 7 Home Premium 64 bit.
I just discovered that Windows Media Player does not recognize songs I recently downloaded from the Wal-Mart Music Download Site. The songs can be seen in the Music Library in a folder named "Downloads" and I can open each song and it will play when double clicked. The problem is that I can not create a playlist containing the new songs and burn a copy of the playlist because the songs are not listed in the Media Player library no matter hot it is sorted (Artist, Album, Genre, etc).
Any help/suggestions would be greatly appreciated.
Mitch
This question was solved.
View Solution.

You might also want to consider moving the songs to my Music or the folder you have WMP set as your Music folder. You can find/change that folder in WMP by going to File ---> Manage Libraries
Launch WMP ----> Tools ----> Options --->Privacy and be sure that the Display information from the internet box is checked.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

"Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea.

A friend gifted me a copy of The Amazing Spider-man, I redeemed the code, now it tells me I can't download it onto my Ipad (1st Gen) because it does not have a gyroscope. Is there a way for my friend to get his money back, or a way for me to download it?

A friend gifted me a copy of The Amazing Spider-man, I redeemed the code, now it tells me I can't download it onto my Ipad (1st Gen) because it does not have a gyroscope. Is there a way for my friend to get his money back, or a way for me to download it?
As a second option I can play on my 1st gen Ipod Touch. Does that have a gyroscope?

Contact iTunes Store support staff through the report a problem links in your account history or,
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store - Apple states all sales are final, but you can always ask nicely. Your friend should have checked the specifications of your ipad before making the gift.

I purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!

i purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!

Yes, I have a TLP license, so which kind of upgrade should I buy?
I'm an Italian user and I would prefer to contact support by web chat but I can't find it in the website, please can you help me? Thank you, I'm desperate!

I have a Macpro Book and I just downloaded new software to my ipod touch(3rd gen). Now itunes does not recognize it nor will it turn on. I believe it just downloaded but did not update the software. What do I do?

I have a Macpro Book and I just downloaded new software to my ipod touch(3rd gen). Now it does not show up in itunes nor does it turn on. I believe it just downloaded the software and never updated it. What do I do?

You appear to have a second generation iPod touch, not a third, and those can't be updated past 4.2.1. Apple sold 8GB second generation models at the same time as the third generation ones.
(70782)

Windows 8.1 does not go to sleep reliably anymore

I recently did a clean install of Windows 8.1 Pro x64 (final version). Before doing the clean install, all hardware being identical, my Windows 8 was ran smoothly and went to sleep fine automatically after the set time.
Now, after the clean install, although I believe I have installed and set up everything as before, the computer does not reach standby automatically anymore most of the time. To be precise, when I reboot or log off and on the PC, the sleep functionality
is re-established for a while, but after 1 or 2 hours of work it invariably gets lost.
However, as soon as I disable the Ethernet adapter, the PC sleeps as expected.
I do not seem to be able to figure out why this is, or how my configuration is different than before.
Here are a few specs about my hardware: ASRock Z77E-ITX mainboard (http://www.asrock.com/mb/Intel/Z77E-ITX/, has the Windows 8.1 compatibility sticker), Intel Core i7-3770, 4x 3.40GHz including Intel HD 4000 integrated graphics (no external graphics installed),
Intel 530 Series SSD, Intel 520 Series SSD, WD HDD. I have use a wired Ethernet connection, my Ethernet chip is from Broadcom. Wifi chip is disabled.
Since this has been a pervasive issue with all Windows versions, the internet is full of suggestions how to resolve this matter. Why I am not convinced that the old advice still has any bearing as I tend to think Windows 8.1 introduced new issues (bugs?),
for the sake of covering all bases, I tried almost every tip I could find on the net and will list my fruitless attempts in the following. It might also be useful as reference for other people trying to tackle such issues.
1) Installed latest Windows 8.1 drivers from Asrock's homepage. I also tried chip manufacturer's like Intel's own drivers, did not make any difference (so far).
2) Left the homegroup and disabled homegroup functionality as for example in these threads it has been argued that this is a new issue with Windows 8.1: http://www.eightforums.com/general-support/28226-windows-8-1-refuses-sleep-2.html
http://www.eightforums.com/general-support/33221-windows-8-1-does-not-go-sleep-standby-automatically.html
3) In the Ethernet adapter's settings, I unchecked ipv6. I also made sure the device cannot be awaken through the network.
4) I even went so far to disable network discovery as
file and printer sharing (both in private and public profiles) and disable
public folders.
5) Even though sharing is disabled, I also made sure that within the energy options the computer is
allowed to sleep when sharing media.
6) powercfg /requests returns "none".
7) ran powercfg /energy duration 300 from an elevated command prompt while the ethernet adapter was enabled. It found 9 errors, mostly related to USB hubs, but the same errors were also recorded when I repeated the exercise having the ethernet
adapter disabled. So these errors are probably not relevant for the problem at hand.
8) powercfg /devicequery wake_armed : just the mouse and keyboard appear
9) I tried netstat which shows many connections but do not know how to interpret them or what to look for. Same for
Wireshark. If anybody can guide me on how to use these tools, I am happy to learn about it.
10) powercfg -requestsoverride DRIVER \FileSystem\srvnet SYSTEM
did not help, reverted it.
11) Uninstalled software some would find suspicious: Cisco Anyconnect VPN Client, Shadowprotect Desktop backup software, VMware player. Did not help.
12) I also have a MySQL server installed, which I did NOT uninstall because it would be too much point reinstalling and reconfiguring it. However, I doubt this is the culprit as with Windows 8 it did not prevent any sleep. Even when I stop the server the
PC does not go to sleep.
This is more or less it. I am out of ideas and welcome any feedback.
Again, when the Ethernet adapter is disabled, the PC sleeps as programmed, but I cannot figure out what communication is responsible for keeping it awake.
Thanks,
Steve

Hi Steve,
I don't know if you'll feel better but - You are not alone facing the same problems, I am sure that all the power handling in 8.1 is a mess. If I force the comp. to go to sleep mode, after a while it is
not staying in the sleep mode but shutting down autonomously. I suppose there is more hidden bugs.
Tazlam
Isn't your computer just switching from sleep mode to hibernation mode after the amount of time set in your power management settings? This sounds like it, as in hibernation the computer is effectively shut off. This is also intended behaviour.
As you guys, I hope MS releases a fix soon.

Software download for hp 7000 printer on windows 7 64-bit does not complete

Similar Messages

Maybe you are looking for