Software driver for iphone

my new iphone is not detected in my pc. is says my software is undetected.. need help please

If you did everything verbatim, try a Microsoft/Windows forum that may provide some help.
If you have a laptop and you live near an Apple store, you can make an appointment there bringing your laptop and iPhone and possibly the Apple Store can resolve it.

Similar Messages

  • HELP!! iPhone won't work! Software required for iPhone is not installed.

    Hey, I have a pretty big problem. I just got the iphone yesterday, and tried all night hooking it up, but no luck. I installed the latest iTunes, but everytime I plug in my iphone, i says it doesn't have the software required to install iPhone. Please uninstall iTunes using setup, then re-install.
    Well I do that, 4 times in fact, but same error every time. iTunes works, everything installs, but iPhone just won't activate. Windows sees iPhone and pulls up the auto-play dialog, but iTunes says to keep re-installing.
    I called tech support, but was on hold for 2 hours, then just hung up.
    If someone could help me out, that would help a LOT
    I'm running Vista, 64bit.
    ps: Windows says installing driver in the bottom right, and says the driver installs successfully every time. I uninstall the driver manually too, but no luck
    "The software required for iPhone is not installed. Please run the iTunes installer to remove iTunes, then install iTunes again."

    The same thing happened to me when i first plug in my iphone. it said that in order to use the iphone u needed the WINDOWS XP SERVICE PACK 2 or later installments. you can down load that from windows.com if you already have windows for you computer. then i tried it again and said that i had to uninstall itunes and reinstall it back on to my computer. i did that also. im not sure how u did it but did u completly take it off your computer? because thats how i did it, i took it completly off, and went back to apple.com and downloaded it again. i dont know if this was any help to u.

  • The software required for iPhone is not installed. Run the iTunes installer

    I install and reinstall itunes many times following the "Support instructions" but nothing solve my problem.
    At the end of each re-instalation, when i start itunes i get this message "The software required for iPhone is not installed. Run the iTunes installer to remove iTunes, and then install iTunes again".
    The driver USBAAPL.SYS, and the Apple Mobile Device Support is never installed.
    Please HELP!
    Thanks.

    jaffy,
    iTunes is not supported on 64-bit versions of Microsoft Windows Vista or XP. As is stated in this kbase article:
    http://docs.info.apple.com/article.html?artnum=301301
    To quote the article:
    "iTunes is currently not supported in Windows XP Professional x64 Edition or any 64-bit edition of Windows Vista. Features may or may not work correctly."
    Nathan C.

  • Software (driver) for Vodafone K3772 dongle especially OS X Mavericks?

    Hi,
    I was using Vodafone K3772 dongle, with three network driver (http://support.three.co.uk/SRVS/CGI-BIN/WEBISAPI.dll/,/?New,Kb=Mobile,Ts=Mobile,T=Device,Case=obj%282465%2 9). However its was working perfectly on my Mac OS X Mountain Lion, is not working on OS X Mavericks. When i open driver (three netwrok driver) its getting crashed. Please suggest me exact Software (driver) for Vodafone K3772 dongle esxpecially OS X Mavericks.
    Thanks in Advance,
    Suresh Balakrishnan.

    Using Mac OS X 10.9 Mavericks with 3 Mobile Broadband Huawei dongle
    So there I was in a meeting with a website client at our local coffee bar K Sue Raa in Chandler's Ford, my MacBook loaded up and trying to connect to the internet with my Three mobile broadband dongle (Huawei). To my surprise the '3 Connect' program crashed reporting that my OS is not compatible? I thought this was strange considering I had used it a few weeks before without any issue.
    What could be wrong?...... Ahhhh! I recently upgraded the OS to 1.9 Mavericks. That was the problem.
    As there was no free Wi-Fi accessible I continued the meeting using my iPhone as my website presentation tool.
    When I got back to the office I sought a solution, only to discover there is currently no driver update available from Three for Mavericks. However, this doesn't mean your 3 dongle will not work. There is an easy solution that will keep you connected until a driver update is available. It just needs you to set up the connection manually. To do this, do the following:
    Connect the dongle to your Mac then,
    Go to System Preferences > Network
    You will see something like the screenshot below...
    Simply enter the fields as highlighted above (Please note: these are the UK settings for Three). The password can be anything you like.
    Now click 'Connect'
    You should now be connected to the internet (provided you have signal of course!)
    I hope this helps!

  • HP officejet Pro 8500A software driver for Mac OS v 10.10.2

    Dear,
    could you please provide me the HP officejet Pro 8500A (A910a) software driver for MacBook pro (OS X Yosemite v10.10.2) while is it not available on the website.
    regards,
    This question was solved.
    View Solution.

    Sure,
    thank you again 7 best regards,

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

    Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
    I would like to strem movies from the hard drive to iphone.
    I have already seen the Goflex Stellite, which works this way.
    Is there any other device that could do this?

    I did a typo. My current computer is a 2010 1/2 iMac.  The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs  would be possiblities.
    Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

  • Why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

    why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

    Disasble the computer's security software during the download and update.

  • Windows 7 driver for iPhone 4 not reconized

    Hello,
    I have an iPhone 4 and windows 7. When I plug my iPhone to my laptop, iTunes reconizes it and all works in iTune, BUT it does not appears in my desktop menu and I cannot acces to my photos.
    Windows 7 doesn't manage to install the driver for iPhone 4.
    Can somebody help me please?
    Thank you very much
    VERSION FRANCAISE
    Bonjour,
    J'ai un iPhone 4 et windows 7. Lorsque je connecte mon iPhone sur mon PC, iTunes se lance et le reconnait bien et tout fonctionne corretement dans iTunes, MAIS il n'apparait pas dans le menu "ordinateur" (poste de travail)  et je ne peux donc pas accéder à mes photos.
    Windows 7 ne parvient pas à trouver et installer un pilote iPhone.
    Quelqu'un peut'il m'aider SVP?
    Merci beaucoup d'avance

    Help with what?  The Win driver won't do anything for you as the iPhone itself does not support any bluetooth protocols that can be used with it.
    http://support.apple.com/kb/HT3647

  • If there is no driver for iphone S4, how do I connect the phone and PC?

    If there is no driver for iphone S4, how do I connect the phone and PC?

    With the special cable that came with the phone. You must install iTunes on your PC in order to access the phone, sync it, and back it up.

  • TS1538 i receive an error code 10 ( the device cannot be started ) when i try to manually install driver for iphone 4s in windows 7

    Hi folks,
    Can somebody enlighten me on manually downloading the driver for iphone 4s on my windows 7?
    i tried reinstalling it several times as instructed in the artcle http://support.apple.com/kb/TS1538 but all i receive is an error code 10 saying that the hardware couldn't be started.
    Thanks in advance for helping me out

    Are you saying that you are running iTunes 10.7 now and it is still telling you to update iTunes?

  • Nigpib-linux-0.6 GPIB software driver for Linux and PXI GPIB board

    My I use nigpib-linux-0.6 GPIB software driver for Linux in a Compact PCI system running linux and equipped with your PXI GPIB board ?
    Thanks.
    Paolo Santinelli.
    [email protected]

    If you alter the device ID of the device from c801 to c821 within the driver module, you should be able to use the driver with the PXI board.

  • Can anyone tell me if there is a new printer software/driver for Laserjet 1300 for Windows 7 64-bit?

    I recently replaced my 2 Windows XP Media Center computers.  I have a new Desktop with Windows 7 Ultimate and a Laptop that has Windows 7 Professional.  I have an HP Laserjet 1300 printer that I would like to connect with my desktop.  This printer still works.  Keeping it would save me money.  Can anyone give me the link to the Laserjet 1300 software/driver for Windows 7 64-bit?
    Thanks in advance!

    Hi donhkraft,
    I am not sure what would cause the issue you are seeing, but you can try to download the driver from HERE instead.
    Let me know if you need any other assistance.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • What is the right driver for iPhone 4 for iTunes 10.2.1.1

    I upgraded my itunes to 10.2.1.1 on Windows 7 and tried to upgrade my iPhone IOS to 4.2.1. Unfortunately, the apple recovery iBoot driver will not load and my iPhone has an USB cable icon pointed to an itunes icon and will not start.
    I see four drives Apple recovery iBoot USB driver 6.0.9999.52, 6.0.9999.53, 6.0.9999.55 and usb composite. All these drivers failed to load into Windows.
    What is the Apple recovery usb driver and how do I get the driver loaded so, y iPhone can start up?

    Jac -
    --Tom asked "what format are you capturing?"
    1. What camera (that the Church owns?) are you using now? Does it record to a small Memory card or to tape? -- What make & model is it? HD or SD?
    2. If the camera is storing to a media card, you can (a) copy the contents of the card to a thumb drive attached to any laptop at the church, take it home and import into Final Cut X there or (b) borrow the media card(s) and take it/them home.
    3. What laptop computer do you and/or the Church presently own? What is the operating system version? How much memory, size/type of internal Storage? Any external hard drive storage? You mentioned that you own a Mac Pro at home. What model? (Apple Menu/About this Mac/System Information) What are its specifications?
        Almost any computer would be able to simply copy files using the finder - without using Final Cut Pro X for capture at the Church.
      One can purchase 128 GB., USB 2/3 thumb drives for about $60 and up.
        If your Church's camera is a Tape based Camera, then you could just take the tapes home. No? "Capture" at home. Yes?
       You are currently capturing to an esata drive? which drive? which model Macbook Pro do you own?
       Finally, is your Church going to be purchasing whatever new equipment that you may need?

  • Software update for iphone 3g?

    Could you please tell me why there isnt a new software update for the iphone 3g latest being 4.2.1?
    Surely when you invest in an iphone and at the cost of them Apple should always provide update so you can actually use/download the apps?
    Can anyone tell me if i can do anything to get better software or how i can use the apps?
    Is there a software update due?

    Could you please tell me why there isnt a new software update for the iphone 3g latest being 4.2.1?
    Because the hardware in the iPhone 3G is insufficient to run the newer features of the newer versions of iOS.
    Can anyone tell me if i can do anything to get better software
    If you mean iOS, you can't. iOS 4.2.1 is the last version your iPhone will run.
    or   how i can use the apps?
    You'll need to find apps that the developers have kept compatible with older versions of iOS and older iPhone hardware. Or buy a new, or newer, iPhone.
    Is there a software update due?
    The chances that there will be any further updates to iOS for the iPhone 3G are vanishingly small.
    Regards.

Maybe you are looking for

  • No data in ecc variables in failover mode

    Hi all, got a problem with custom enterprise data layout when CAD is connected to secondary node. With "set enterprise..." I set a special layout for CAD enterprise data in my script. This works fine as long as CAD is connected to primary node. When

  • I was sent the 8 GB instead of the 16 GB, I paid with PREPAID, and no one can admit a mistake, no department take to other dept on your behalf!

    On June 26th  after 7:00 p.m. Central time I spoke to sales on the phone as the PREPAID website was having issues.  I was on an expired VERIZON contract and wanted my current telephone # which is not an option online. I called customer service to ord

  • Workbook in role but not on user menu

    Hi All I have a workbook saved under a certain role menu. The workbook apeears fine under the role when using BEx. However, the workbook has disappeared from the User-Menu in SAP-GUI. I have tried to refresh the user menu, change and re-save the work

  • Empathy 3.8.1 can't add AIM or Yahoo accounts

    Empathy can access accounts that are added through Gnome online accounts, but cannot add AIM or Yahoo accounts. Once I put in the required info and hit "login" nothing happens. All of telepathy is installed. Any ideas?

  • X86 custom pxe jumpstart question...

    Hello, I am trying to pxe boot any hardware and do a basic solaris 10 unattended install.. I have the pxe boot working but can't quite get the unattended install to work... It comes up and asks for the 6 options and defaults to the interactive instal