Software Duplicate in Report
Hi everbody
I have a doubt with software report. When a run a report for specific computer, visual studio appear twice like visual studio 2013 professional and visual studio premium 2013. But looking in add\remove programs that is only visual studio premium is installed.
Why does he do this confusion?
Vitor Cesar
Hi,
I assume that you are talking about the report - "Software registered in Add Remove Programs on a specific computer". The data in this report is the same as the data in the "Installed Applications" and "Installed Applications(64)"
of Resource Explorer for the specific device. The data is collected from
SMS_InstalledSoftware class and
SMS_InstalledExecutable class on the clients, not from add\remove programs.
Best Regards,
Joyce
Similar Messages
-
Software Requirements for Reports on NT
I am testing Oracle Reports on my personal
NT box and using SQL*Net to go against Oracle 8.0.5 on an NT server for my data. I will need the NT server/Oracle 8.0.5 to service my production reports. It is not clear what software (for Oracle Reports) will need to be installed on the server. Help please. I've seen references to a "Report Server" and don't know what that is or if it is needed or required. Any help would be appreciated.System requirements | Adobe Premiere Pro
(for initial activation of individual licensees, an adobe connection is required.) -
My KMS server is running on Windows Server 2012 R2 and activated by Server 2012 KMS Key.
I would like to use the KMS server to activate many Windows 2008 R2 server, however, Error message "0xC004F050 The software licensing service reported that the product key is invalid" is appear when adding Windows Server 2008R2 KMS Key. The Windows
Server 2008 R2 KMS key is confirmed and validated by Microsoft Telephone service.
Command used:
slmgr /ipk <Windows Server 2008 R2 KMS Key>
Anyone can help? thanks.Hi Samson,
Based on my research, we need to choose associated KMS key based on the highest product being deployed in the product grouping hierarchy.
To choose the right Volume License key, please refer to this article:
How to Choose the Right Volume License Key for Windows
Please type the cmd "slmgr /dlv" on KMS Host and check if it has been activated successfully.
After configure KMS host, By default these KMS client computers will query DNS and locate your KMS host and activate
KMS Client Setup Keys
To reset computers to be KMS clients type the following at elevated command prompt:
Slmgr.vbs /ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
Where xxxxx-xxxxx-xxxxx-xxxxx-xxxxx is the generic VL key from the following link.
https://technet.microsoft.com/en-us/library/jj612867.aspx
For more detailed information to activate KMS client, please refer to the article below:
Installing KMS Hosts
Configuring KMS Clients
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Software Applications Deleted Report
Seeing the applications installed report generating data, but I'm not getting any data from Software Applications Deleted Custom Inventory report and I have uninstalled apps through Zen. Any ideas on if this report is working for anyone and if so, any clues?
harrymsg,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Vendor duplicate payment-Report
Dear Guru
I have an requirement to develop a report that can tell about vendor duplicate payment considering Partial payment and residual payment and full payment.Is there any standard report available ? O r I have to develop a new Custom report.If Custom report that how can i do this ?Hi,
Standared report available to get Partial/Residual/full payment details T.Code: FBL1N
I think it is not satisfy your requirement, better to develop customized report by using tables BSIK,BSAK,BKPF
Regards
Viswa -
hi
i want to run report based on Duplicate Payment . which table contains this information? this report should return different and/ or the same vendors with the same invoice numbers, and/or identical payment amounts with different invoices and the same vendor -
any table contain this information?Standard Extractor 0FI_AP_4 brings data from BSIK and BSAK.
you should be able to query data from InfoProviders based on this data source.
You might be able to use standard DSO 0FIAP_O03 for this.
If you have two or more clearing documents with the same invoice number, you might have some partial payments or duplicate payments.
You might want to involve your busienss users to find out the exact criteria to identify duplicate payments. It will be lot easier to meet the requirements if you try to understand the functional requirements from the business and then locate the fields that are needed for this purpose and try to come up with the correct logic for this.
Good Luck.
MP. -
Hello,
I'd like to know if there is a way to duplicate, save as or copy the report on one tab to another tab without having to copy each element of the report individually.
Thank you
TracyHello,
There is not a straight-forward way to do this, but please give the following a try:
Excel 2013 PowerView: how to move/copy/duplicate PowerView worksheets?
Hope this helps.
Faisal Muhammed My Blog -
We have implemented duplicate document detection. There is supposed to also be a report but we do not have it. Does anyone have the part file?
Hello,
Report : [How to Enable Automatic Duplicate Check for Resources in KM Repositories|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70a984f4-5bae-2b10-b29e-ef3770c09bf4]
Service : [Automatic Duplicate Check for Resources in KM Repositories|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606e87c2-e4c4-2910-fea8-eb38bd2ed392?QuickLink=index&overridelayout=true]
Regards
BP -
Duplicate Post Report Rejected
On Aug. 28th I used the "Report this post" facility to report a post as a duplicate of one posted three minutes before. This morning I received to my mac.com account e-mail that my report had been rejected. Included was this text: "delivery temporarily suspended: host mail-in6.apple.com[17.254.13.9] refused to talk to me: 554 Open proxy list. Review your server settings."
Something seems to be broken.Eric W. wrote:
I am curious if anyone else has had this problem recently.
I just had one a little while ago.
<[email protected]>: delivery temporarily suspended: host
mail-in2.apple.com[17.254.13.5] refused to talk to me: 554 Open proxy list.
Review your server settings.
Reporting-MTA: dns; jiveasp-apple08.managed.contegix.com
X-Postfix-Queue-ID: 38C9ACDEF17
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Mon, 31 Aug 2009 15:01:20 -0500 (CDT)
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 4.0.0
Remote-MTA: dns; mail-in2.apple.com
Diagnostic-Code: smtp; 554 Open proxy list. Review your server settings. -
Highlighting field, if it's a repeat/duplicate throughout report
I want a field to highlight if it's an repeat/duplicate through out the report. I'm using =iif(Fields!PART_ID.Value =previous(Fields!PART_ID.Value), "yellow", "transparent") and currently it only works within a group section of the report.
Suggestions will be greatly appreciated.Hi Shi,
According to your description, you want to highlight an repeat/duplicate data for one field ([Group]) when the field isn’t a group section.
In your scenario, we can add a sorting based on [Group] field within the tablix. Then we can specify the BackgroundColor for [Group] field with pervious function. Please refer to steps below:
1. Open Tablix Properties, add a sorting based on [Group] field on Sorting page.
2. Open Text Box Properties for [Group] field, specify the fill color with expression below on Fill page:
=IIF(Fields!Group.Value=previous(Fields!Group.Value),"Red","Transparent")
3. Preview the report.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
LMS4.1 aggregated duplicate MAC-Report
Hello,
We want to quickly identify ports with probably attached mini-switches/hubs. Does a report type exist in LMS4.1 showing duplicate MACs aggregated with its count of occourence, not line by line?
Is it planed to bring out basic aggragate functions (avg,min,max,sum,count) into LMS/PI Report-Generator to be able for a real flexible reporting without the need for accessing database directly?
SteffenI can't disagree with your logic, I guess I just assumed such an enterprise solution (that is FAR from cheap) wouldn't require an export of my close to 20,000 records to a .csv in order to do simple sorting.
I will continue to look for a solution within the application, but if worse comes to worse i guess an export could suffice for some of what i'm trying to do. -
Software Inventory and Reporting Services Seems Broken..
Some basic info...
Server 2012, SQL 2012, SCCM 2012 R2. All products up to date. Enviornment has been running for about 2 weeks, with all the test clients being brought in a few days after server install.
I went to run the report "Computers with a specific product" two days and when I went to select my product, there were no values, as if the inventory process wasn't working. I verified in client settings and also saw that hardware inventory data
was coming back. I can run any of the hardware related reports and they have data.
I did add a couple inventory classes (Installed Executable & Installed Software) to see if that would help, but it did not. I've forced policy updates and run inventories again, still blank. Looking at InventoryAgent.log, it appears everything looks
good. I see the 4 software classes reporting back.
There is probably something simple that I'm missing, but I can't found out what that is.
Edit: Forgot to post the InventoryAgent.log file... http://pastebin.com/AkTWQurpThis goes back to the basic definitions of what the two different types of inventory actually do. Software Inventory is actually a file inventory and by default in 2012 collects *nothing*. To have it collect information about exe's, you would add *.exe (preferably
scoped to just C:\Program Files and C:\Program Files (X86)) to the software inventory configuration. This enables ConfigMgr to gather data from the PE header of the exe files which in turn is used for the report you called out (and others listed as Software
Inventory).
The question though is do you truly want information about exes or do you actually want information about installed applications? Just because an exe exists does not mean an application is actually installed. That's where Add/Remove programs information
potentially comes in. Information in Add/Remove Programs is *not* collected by Software Inventory though -- as mentioned Soft Inv collect file information. ARP data is collected via WMI by Hardware Inv in ConfigMgr. To get this info, use one of the reports
that lists info from ARP. This is collected and is available by default.
ARP isn't the end all be all either and that's where Asset Intelligence comes in. AI is a layer of intelligence on top of Hardware Inv that collects additional details and adds reports that takes the raw ARP data and combines it with other evidence to give
you better information about "Installed Software". The AI reports are conveniently under the AI folder in the reports. AI is not however enabled by default so you must enable it.
Finally, even AI is not perfect because, as we all know users aren't actually the only bane of our existence but so are vendors who do non-standard things. That's where third-parties like BDNA come in come that provide even better interpretatin of the raw
data collected by ConfigMgr.
Jason | http://blog.configmgrftw.com -
Software Updates Compliance Report issue
Hi all,
I came across a weird behavior in built-in reports and I am looking for a fix or explanation.
I am trying to use "Software Updates - A Compliance" category -> "Compliance 4 - Updates by vendor month year" report, but when I choose the desired collection (All Servers) and keep the rest as "All values" (as I want to
list everything), report shows only 12 pages of results. By this I can't see all as the report is truncated. If I specify year, I get results which are not listed in "All values". I can get the list of updates by selecting each year separately and
export them, but...
Can someone explain why the report shows incomplete results and only 12 pages?
Thanks in advance!
ArnieI looked at the SQL Query what is been used in the SSRS Report .seems like the name all values misleading here.
as per the declaration of these input variables,the all values means ,Null or empty.
If at all,you need to get all KB information from very long date as you mean ,get all the values,then you should really modify the query.
SQL is mainly doing the filter based on the following (apart from joins):
(@FromDate is null or ci.DateRevised>=@FromDate and ci.DateRevised<@ToDate)
and (@VendorID=0 or @VendorID=ven.CategoryInstanceID)
and (@ClassID=0 or @ClassID=cls.CategoryInstanceID)
and (@ProductID=0 or @ProductID=prd.CategoryInstanceID)
order by ci.DateRevised desc
for Ex: If you select vendor as 'All Values' ,means nothing, implies vendor is blank. You can try selecting the vendor as All Values and you get the KB information for only with vendor as Null.
declare @VendorID int = case when @Vendor='' then 0 else (select CategoryInstanceID from v_CategoryInfo where CategoryTypeName='Company' and CategoryInstanceName IN (@Vendor)) end
from the above vendor select statement, you must supply some value to it either Microsoft,adobe or local publisher else ,the declare statement treat the vendor value as blank .
Next ,Year :
declare @FromDate datetime = case when @Year!='' then convert(datetime, @Year+'-'+case when @MonthNumber!='' then @MonthNumber else '01' end+'-01', 20) end
for year and month,you should select the value otherwise,you get the information with null values or so.
Same goes for Month ,product ,Update Class.
declare @ToDate datetime = case when @Year!='' then dateadd(month, case when @MonthNumber!='' then 1 else 12 end, @FromDate) end
declare @ProductID int = case when @Product='' then 0 else (select CategoryInstanceID from fn_rbac_CategoryInfo(@lcid, @UserSIDs) where CategoryTypeName='Product' and CategoryInstanceName=@Product) end
declare @ClassID int = case when @UpdateClass='' then 0 else (select CategoryInstanceID from fn_rbac_CategoryInfo(@lcid, @UserSIDs) where CategoryTypeName='UpdateClassification' and CategoryInstanceName=@UpdateClass) end
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr -
Software Updates Compliance Report for Specific Computer - DatePosted
Hello, I am using the default report to know the Software updates compliance state for a specific computer. The business requirement is to get date the software update has been posted in the same report. So the report should contain columns as follows:
Title
Update Class
Bulletin ID
Date Released/Date Posted
Article ID
Vendor
Approved
Installed
Is Required
Unique Up[date ID
The default report shows up all the columns except the date posted. Please help me with a query with which we can get date released with all the other columns.
Appreciate your help!
ThanksHi,
Please refer to the link below:
Troubleshooting SCCM Software Update Deployment Package distribution due to missing directories
http://blogs.technet.com/b/ken_brumfield/archive/2013/01/10/troubleshooting-sccm-software-update-deployment-package-distribution-due-to-missing-directories.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Attempting 1st time sync and software duplicates first name as middle name
I am attempting my 1st sync between my Blackberry Pearl 8130 device and my Microsoft Outlook. When I do this the software is automatically duplicating the first name of many of my contacts and then proceeding to add the same first name to the middle name as well. Is there a way for me to synchronize my Blackberry device without adding these incorrect duplicate middle names? If not, is there a simple way to edit anything in the synchronization process, and if so how?
Thanks!Thanks for your reply, but this script will result in the format "John Quincy"
I need a script that will result in the following format: "John Q.".
The script will need to extract the middle initial (first character) of the "EMP_MiddleName" field.
Maybe you are looking for
-
In the old version of Firefox I could save all my open tabs when I shutdown Firefox but now with the new version it does not give me that option to save the tabs before closing Firefox.
-
OIM 11g R1 - Request Type Description Customization (Translation)
Hello Experts, I'd like a little help to know if it is possible to customizate the following: OIM is using Browser locale to change the language on Web Console. Does any one know how to change the translation to the Request Type description (the list
-
Writing data DVD sometimes results in lost data.
Hi there First a bit of background on the Mac in question. We have an G5 running Leopard (10.5.8) here that we use as a file server. Operator copy files off the servers, work on them locally, and then copy them back when finished. After a job is fini
-
Got help fixing my youtube problem, now that is working. In the process of making the fix, lost my aol set up. Re installed it, but cannot access the icon. How do i get my AOL back?
-
OutOfMemory error in Weblogic jvm even when enough heap is still available
Hi Everyone, We get a strange OutOfMemory error that happens only once in our Weblogic server in production environment.The Server immediately recovers and there is no issue as far as the application functionality is concerned. This is the exact erro