Software/firmware updates on Mac
I was looking at the Nokia website to update any software on my N73 & all I could find was a .exe for a PC. Does this mean if I have a Mac I can't update my phone? (
Hi...
At this time Nokia has that list of Mac software
( http://europe.nokia.com/link?cid=PLAIN_TEXT_217191 )
But you can try the write to Nokia or Mac OS team support. Good luck!
Nokia! Take a care for me and we real say THANK YOU NOKIA and you can collect a more money
Similar Messages
-
How to know when a software/firmware update is out?
This is my 1st iPhone and was wondering when a software/firmware update is available do you get it through the iPhone itself or do you have to connect it to iTunes to get it?
When you connect your phone to iTunes, you will be notified of an available update. You may also see posts here or elsewhere announcing an update (after the fact).
-
How long does it typically take to update new apple products? I'm speaking in terms of software/firmware updates. My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working flawlessly.
I appreciate the responses, however my initial post was too vague. I apologize and will explain. The specific issues are the window closes occasionally when loading something large, that has ceased in the last day or two. My battery life is no where near the second gens, is that the extra hardware at work? I thought that had been accounted for? One of the frustrating, albeit humorous occurrences is when I placed the second and third gen within 1 foot of each other, turned off LTE, and streamed a video. From every location the second gen out ran the new model on 3G signal, lol. Not a huge deal since I have wi-fi or LTE pretty much everywhere I am, but disappointing none the less.
The new apple tv is great, except for the same thing everyone is posting about. HD iTunes library streaming taking overly extended load times. I don't expect it will take too long for apple to address that issue. I'm new to apple, last 6 months, but they seem to have excellent support! It is definetly highly rated. -
27" iMac very sluggish after recent software/firmware update
I bought my 27" iMac (2.7 GHz Intel Core i5, 4GB RAM) maybe 6-7 months ago...and it has had NO problems. Even after updating to Lion. Smooth.
But after the most recent graphics firmware update (Feb 29) and software update (late Feb/ealry March 2012...can't remember exact date)...now my iMac is so sluggish! Running more than one application really makes my iMac run slow. And I'm not talking about Photoshop...I'm talking about Firefox, Safari, Mail, iTunes. Basic ones. Especially bad when I play video...very choppy.
Any clue what's going on? I ran Disk Utilitiy (all good, repaired permissions), Clean My Mac, CCleaner...all say good and healthy. So I am at a loss.
Any help would be greatly be appreciated. I'm still under warranty...but I don't think I need to bring it in do I?
Thanks!Hi Linc Davis,
I am trying the Terminal commands as you suggested. I am copying and pasting the output below:
Step 1 output:
com.Cycling74.driver.Soundflower (1.5.1)
Step 2 output (after password):
com.microsoft.office.licensing.helper
com.machangout.glims.loader
com.citrixonline.GoToMyPC.CommAgent
Step 3 output:
com.citrixonline.GoToMyPC.LaunchAgent
com.adobe.CS4ServiceManager
com.macpaw.CleanMyMac.volumeWatcher
com.macpaw.CleanMyMac.trashSizeWatcher
com.macpaw.CleanMyMac.helperTool
com.google.keystone.user.agent
Step 4 output:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
GlimsAdditions.framework
HPDeviceModel.framework
HPPml.framework
HPServicesInterface.framework
HPSmartPrint.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
net.juniper.DSApplicationServices.framework
net.juniper.DSCoreServices.framework
net.juniper.DSNetworkDiagnostics.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
.DS_Store
AdobePDFViewer.plugin
Flash Player.plugin
GlimsAdditions.webplugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
huludesktop.webplugin
iPhotoPhotocast.plugin
net.juniper.DSSafariExtensions.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.CS4ServiceManager.plist
com.citrixonline.GoToMyPC.LaunchAgent.plist
com.machangout.glims.agent.plist
/Library/LaunchDaemons:
com.apple.remotepairtool.plist
com.citrixonline.GoToMyPC.CommAgent.plist
com.machangout.glims.loader.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Flash Player.prefPane
GoToMyPC.prefPane
Perian.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AC3MovieImport.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
Perian.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
Glims.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
Aladdin
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
YMsgrCallABPlugin.bundle
YMsgrMsnABPlugin.bundle
YMsgrSmsABPlugin.bundle
YMsgrYimABPlugin.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
BrowserPlus_2.9.2.plugin
GlimsAddition.notplugin
Picasa.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.apple.AddressBook.ScheduledSync.ABExchangeSource.1B4BA2C7-8ACA-4857-8BDE-B6F 9698BABA2.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.1F0D2067-5983-4134-AD50-A70 652DAED7C.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.A4130F93-370D-42FD-86A0-CD8 4B1494812.plist
com.google.keystone.agent.plist
com.macpaw.CleanMyMac.helperTool.plist
com.macpaw.CleanMyMac.trashSizeWatcher.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
Library/PreferencePanes:
BrowserPlusPrefs.prefPane
Growl.prefPane
Step 5 output:
2012-03-11 22:38:01.741 osascript[408:707] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
osascript: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
GrowlHelperApp, Skype, Nokia Multimedia Transfer, Quicksilver, Dropbox
Ok...I hope you can see if there are some 3rd party apps that are slowing down my system Linc Davis...please let me know okay?
Thank you very much for your assitance!!! -
Firmware Update without Mac OS 9
I have an old Powerbook G4 15" Ti 500MHZ which I've been trying to fix since purchasing on eBay just over a year ago. The machine arrived with a major problem in that it would not recognise it's own HD after restart. So loading Tiger and any new software involved complete shut downs. After describing the problem to an assistant in an Apple shop I deduced the HD itself was the problem and decided to replace it myself with a Western Digital 120 GB Scorpio which went smoothly for a while, however the same problem of not finding an HD after restart soon came back.
Am I right in suspecting I need to update the Firmware on this model? If so, I am stimmied by the fact that I do not have Mac OS 9/Classic installed and this Firmware update will only run in that environment. I have tried loading the old CD of Mac OS 9 I still have from a previous Powerbook G3 model but of course, this won't load unless I have the Classic environment so I feel I am going round in circles: how can I load OS 9 if I don't have Classic and how can I upgrade the Firmware if I don't have OS 9/Classic!
So my question is, how can I strip down all the loaded software and start from scratch with the Mac OS 9 disc? or is it possible to go back to square one and load the Mac OS X Panther discs with Classic on them? Obviously the machine came to me with NONE of the original manuals or restore discs, so it could be this is a hopeless task, so far I have been using the original G4 software install and restore discs from my every day Ti G4 15" 1GHz.
I would appreciate a straight answer to decide whether or not to just ditch this Powerbook. The most recent problem has been trying to load the PCMCIA USB 2.0 card drive, which just doesn't register after installation, I don't know if this is because of the low processor speed of the machine or the installation requires 'restart' instead of the obligatory shut down and re boot I am reduced to right now. The same USB 2.0 card is working fine on the faster machine.
The old Powerbook serves well as a DVD player and for playing games online for my 7 year old. I recently bought eyeTV from Elgato to watch digital Tv and this works well on the faster model, using the USB 2.0 card reader, but I want to use the 500 Mhz as the second TV and I can't get it to load the USB 2.0 software. So that's why I'm trying to fix the thing!
Thanks to all who may be scratching their head with me over this!Once you sort out why you can't install OS X reviewing Mr. Gordon's links, note that you cannot update OS 9 to OS X. All you can do is install OS X as another operating system. That allows you to either run OS 9 or OS X, with the additional ability to run Classic (most but not all of OS 9) when booted into OS X. Further, to run Classic, OS 9 should be updated to 9.2.2. Search http://search.info.apple.com/ for classic for details.
-
Firmware update causes mac book pro to not respond
Hi all. I was hoping someone could help me out please? I just ran the latest firmware update for my 2011 mac book pro and after it installed it now won't start up, only getting to the gray screen before freezing there.
I've tried all the on line solutions I can find on Apple's site, but no luck. Can anyone please tell me how I can fix this??
Thanks heaps.See gray screen
https://support.apple.com/kb/TS2570
Hold the shift key down upon boot, this will perform checks and disable any third party kext files installed into OSX and called a Safe Boot.
(Kext files can also be installed by software itself and if you have it auto-launcing at log-in that could cause a freeze.)
Once in, copy your personal data off the machine to a external storage drive (in addition to TimeMachine if your using it) and disconnect.
Go around and update all your third party software, or remove some that don't have a update and do have kext files in the System/Library/Extensions folder (use the devleopers uninstaller preferred)
If that fails then hold c boot off the 10.6 disk (or command r boot into 10.7 recovery) and simply reinstall OS X, this will replace OS X only with a fresh copy, then software update.
If that fails, then you likely have a failed firmware install, you can install it manually
https://support.apple.com/kb/HT2213
https://support.apple.com/kb/HT1237
If that fails, you'll have to take your machine in for service and get the logicboard replaced.
If OS X boots, but you can't log in or have a problem after logging in, it's likely a third party program or user account issue, create another user account and test again when your problem occurs. If you can't log in, there is a trick to create a new admin account at the command s boot. -
Firmware Updates on Mac Mini Intel
I have a mac mini intel. Two firmware updates come up via Software Update:
- Mac mini SMC Firmware Update version 1.0
- Mac mini EFI Firmware Update version 1.1
I have tried to install both of these individually several times. Each time, after I double click on the icon in the Utilities folder I enter my password and choose "shut down". Each time, the system starts the process and never really shuts down. Instead, it hangs on my desktop screen. Eventually, I push the power button. Then, I hold the button down like the instructions say. There is a sound and then it reboots a second time and returns to the login.
The problem is that when I log back in, it says the update has not installed!
I'm using the original Mac Mini Intel (the higher cost version) and the OS is totally updated. I need to update the firmware so that my bluetooth headset will work properly.
Any suggestions?04-Dec-2006
01:20 PM
salimfadhley wrote:
I have a Mac (Power PC) and a Linux PC. I cannot run "boot-camp" and I do not have any emulation software or a copy of Windows.
I do not have a Windows 2000 or Windows XP computer, and I was not planning on getting one. The only task I cannot do is run the update for my Nokia N80.
I wonder if Nokia are planning to release a "over-the-air" update for this phone? It's a pain that the update process requires such particular software.
I believe v4 of the firmware is downloadable via OTA. It may be network/firmware dependant though. It does mean you'll have to pop along to the local Nokia shop for this update or follow the instructions above.
I have full End User experience of:
5510, 3210, 3310, 3510, 3510i, N80, N80IE, 7610, 2610, 1208 and current E90. -
HT200241 Do supervised iPad allow iOS software (firmware) update?
I would like to stop my iPad user update the iOS software / firmware, does Apple Configurator and supervision can stop user update the iOS version?
ya.. im getting the same thing. people are saying that it will come out for usa and canada at 1 pm reply to me or email me when something interesting happens
Hope this helped! -
Software/firmware update stalled
I was just doing an update of software and firmware "strongly recommended" by apple for all users. A firmware update was included in this package. The process has stalled. It got to the point where I now have a message on the screen saying it is installing software and do not turn off computer. It has been stalled at this point for over 12 hours. What do I do now? If I turn off or attempt to restart, what will happen?
I think I have answered my own question.
I was installing several software updates plus an EFI firmware update.
I just got off the phone with a guy at apple who told me when the software update process seems to be permanently stalled to try:
1) try force quit. Sometimes this will do the trick. (In my case it didn't)
2) Bite the bullet and turn the computer off. And hope for the best.
3) Upon restarting, hopefully everything will go smoothly and you can then run the check for updates routine to see whether the updates did or did not successfully install.
4) If upon restarting the computer stalls on the dreaded grey screen your choices, according to him, are to either call apple and pay for some tech support or take it to a genius bar at an apple store.
Happily, in my case, the restart worked flawlessly and I am back in business. The EFI firmware update has not been installed. Reading the description, I'm not clear why I even want it so I am going to let sleeping dogs lie. -
Is there any way to remove this week's automatic software/ firmware updates
I installed 4 or 5 of the automatic updates this week and have been having several problems since. First i was having problems booting but resolved this from the start disk. Then I was recieving a message saying that the superdrive firmware update was wasnt needed for any hardware on my computer even though i have a superdrive, so i deleted that....
Anyways now I cant seem to use my pro tools l.e. audio recording program. It just wont start up.
Is there any way to go through and remove all of these new updates to see if that resolves the conflict so i dont have to reinstall os x?Hello t:
A direct answer - no. I recommend to everyone that they have a good retreat/backup strategy. I make bootable clones of my iMacs on an external firewire drive using a little program called SuperDuper ($28 at www.shirt-pocket.com).
If you decide to retreat, I would use the archive and install approach.
Before you do that, I would run repair disk from your software install DVD to see if that addresses your problems.
Barry -
Software behaving badly after firmware update intel mac..
strange things are happening eve since installing the firm ware updater.... such as i tunes opens its slef randomly, msn wont close with out ahveing to be force quit microsoft word lost its dictionary..... anyone experienced anything simular? i have tried reseting permissions ect but it dosnt change anything
Hi make,
Do you another another user login setup on your Mac?
If so, are you experiencing the same abnormalities within that user account?
I would also suggest setting up another user account through System Preferences > Users. That should give you an idea of whether or not it's an isolated problem. -
N91 Firmware update with Mac OSx
How do you update firmware on the N91 with a Mac running OSx (Tiger)? Any help much appreciated!!!
You don't, I'm afraid. At least not by yourself or without a PC with Windows, as the update software is Windows-based.
You can take your phone to your nearest Nokia service/repair center, though:
http://www.nokia.com/repair
Or you could find a friend, relative or colleague with a PC running Windows. -
Nokia 3120 Classic Software/Firmware Update
I cannot update my Nokia 3120C firmware from v7.16 to v9.41. Whenever i do it from software updater it shows me updated version but it fails and gives error that make sure your Phone is directly connected to ur PC and not via USB Hub. I update it from my Dell Studio Laptop.
Kindly helpAnyone with information or link to the latest firmware?
-
HT1338 cannot get software to update on mac
I cannot install ITune because my software is too far behind, but it will not update it says there is no updates available.
Your Tag says you have Leopard OSX 10.5.8
If this is the case... read on...
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes...
Be sure to make a Backup of your Current System Before Upgrading... -
How to disable phone software (firmware) updates?
Hi,
Every time nokia suite connects to my nokia c3, says there is software update available for my phone. And doesn't sync anything until i press "update later". I always forget to do, because syncing should work in background without my intervention. Later I see empty calender in my phone, because it isn't synced at all. Tried googlint it, and searching your forums, can't find the answer.
The problem is that nokia suite doesn't update phone through bluetooth. I tried searching for update through phone menu (using phone's wireless connection), but it says no update available. Strange...
How do i get to rid of that ************* message and start syncing automatically again?
Solved!
Go to Solution.I'm doing more experiments. Tried blocking trough firewall, but couldn't manage it. How it is called in windows 7 firewall? I tried removing these, but didn't help, nokia still finds update and doesn't sync: http://dl.dropbox.com/u/2504695/cant%20find%20nokia%20to%20remove%20from%20firewall.jpg
But later i just removed internet cable from laptop and it worked! My nokia suite automatically synced after i launched it. So, I just need to figure out, how to block nokia suite trough firewall not to access internet. Any help here or in fixing this bug?
I've just restarted my laptop, but it didn't help. Firewall still doesn't block nokia suite despite my efforts. And after finding an update it doesn't sync automatically.
Maybe you are looking for
-
I am trying to upload photos from my iPhone to my macbook but each time I plug my iPhone into the macbook, a message comes up which says my device is locked with a passcode and I cannot load the photos. When I plug my phone in, it is on the home scre
-
hi frnds Can you please tell me that wht is the integration for PP and product costing? how the value come into Product costing from PP? Wht are the objects we have to create? thanks
-
DOM to string in C++ Parser
I see this has come up in various forms before, but what's the best way to convert from a DOM Document instance to a string (for saving to a file) using the C++ tools? I found Node::print(...) in the header file, but get a link error as if it's not r
-
Using Struts Example in IPlanet web Server 6.0
Hai i am new to struts and i was trying to run the example application shiped along with the binary distribution in iplanet webserver 6.0. I have extracted the struts-example.war file in to a folder named strutsexamples under my iplane
-
Exception Description: Unable to process XML tag [driver-class] with value
Hi I'm newbie with TopLink. I try to write a litle application with TopLink: - First, I create a session.xml file: <?xml version="1.0" encoding="UTF-8"?> <toplink-sessions version="11g Technology Preview 3 (11.1.1.0.0)" xmlns:xsd="http://www.w3.org/2