SOFTWARE FOR EDITING WITH SONY HANDYCAM ON IMAC

IM NEW WITH VIDEO EDITING. I WANT TO MAKE A VIDEO OF SOMEBODY SINGING BUT I WANT TO ADD THE SOUND LATER.DOES ANYBODY KNOW OF A SOFTWARE THAT CAN SYNC THE SOUND WITH THE IMAGE.THANK YOU IN ADVANCED

Normally you'd sync the video to the sound.
Normally you'd use iMovie, Final Cut Express, Final Cut Pro or Adobe Premier for editing.
Normally you'd turn off the Caps Lock when typing.
-DH

Similar Messages

I connected my iPod to my PC and got a message 'The software for communicating with the iPod is not installed correctly.

I connected my iPod to my PC and received a message box that read "The software for communicating with the iPod is not installed correctly. Please reinstall the iPod's software." Not sure what I need to do. I did uninstall all of my iTunes and related software components and then reinstalled the latest version of iTunes but that did not correct the problem and I now can't access my iTunes library at all.

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

The software for communicating with ipod is not installed correctly..

Everything used to work fine on my laptop. I'm fairly sure it was after I had uninstalled Zune crap from my laptop when my iTunes started messing up and saying "the software for communicating with ipod is not installed correctly".
I've searched the whole internet front to back about this error and most things I find are from 2005'ish. I've tried changing the registry permissions, reinstalling itunes, clearing out everything that has to do with itunes, doing all the msconfig things, manually starting the ipodservice.exe.
I still cannot figure it out and I've had this error for like 3 months. Only thing that I notice that MIGHT be odd is that I'll have ipodservice.exe running (from System) and when I open iTunes another ipodservice.exe will open (from my username) and then close after a few seconds and then I plug my ipod up and bam, the error from above comes up. Anyone have any clue? Like I said everything worked fine at one point!
Thanks!

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

My new IPOD "the software for communicating with ipod is not installed pro"

The message "the software for communicating with ipod is not installed properly keeps on showing up no matter what I do.
I have removed the program several times and reinstalled it several times. I have updated my windows. I have tried just about evertying. I have wasted several hours on this ipod, I am about to return it and be over with it..
I have even went to the homesite to download the updates and the newest version of ipod manager.
My ipod charges from the USB port but I think it is recognising it as a seperate drive.
I dont know what else to do.

Welcome to Apple Discussions.
Are you using Fast User Switching in Windows XP? If so, logout the other users first.
Check this: iPod shows up in Windows Explorer but not in iTunes, iPod Service Error or Please reinstall iTunes

Software for communicating with ipod is not installed properly error msg

after trying to install my ipod nano for the first time the error msg came up saying that the software for communicating with the ipod had not been installed correctly and needed to be reinstalled. I have tried deleting and reinstalling the itunes and ipod software and followed the trouble shooting steps from the web page but every time i plug my ipod in after reinstalling the same message comes up. when i try to use the updater a "service error" comes up and apart from restore i have also tried the five r's can someone please help me
hp pavilion a320a Windows XP
hp pavilion a320a Windows XP
hp pavilion a320a Windows XP

See these for the iPod service error.
iPod service error.
Fast user switching in Windows XP is not supported.

G5 Power PC vs Imac...which is better for editing with final cut studio 2?

This is my present computer:
iMac 3.06GHz Core 2 Duo (2008 model)
4 gigs of 800 mhz ddr2 sdram (this is the max ram for this computer! )
NVIDIA GeForce 8800 GS 512 MB
Hard drive: 465 gig (I use mainly external drives for editing)
I use this mainly for video editing with final cut studio 2.
Rendering in compressor takes forever!!!
A friend suggested I pick up a used G5 Power PC.
I found this one, here are the specs:
APPLE POWER MAC G5 PowerPC DUAL CORE (2 x 2 GHZ)
System Mac OSX 10.5.8
RAM 12 GB
1 Hard drive of 160 Gb
Superdrive 16x CD/DVD/DL DVD (32x)
Video card NVIDIA GeForce 6600 (VRAM 256 Mb)
3 open PCI-Express expansion slots.
1x FireWire 800
3x FireWire 400
4x USB 1 and 2
2x Ethernet Port
2x Displays ports
Is this insanity or a smart move to move over to the older G5.
According to my friend, the older G5s are much better at processing video.
Is a dual 2 GHZ processor enough or would I need a 2.3 or 2.5?
OR is there another option that someone might be able to suggest?
I would be so appreciative of any opinions regarding this issue.
Thanks in advance.
Bill

Save your pennies and look for a refurbished or used MacPro. Early 2008 or newer 8 core machines w/8GB of RAM running 4 instances in QMaster will chew through material.
Beyond running compressor, it is just a better all round machine for editing video.
• it has multiple internal drive bays which run via SATA connections - much faster than the FW800 limits of the iMac for external drives
• it has 3 slots which give you the option of an i/o card from AJA, Blackmagic or Matrox so that you can actually monitor your video properly as well as ingest high end formats
• the slots give you the ability to connect esata raids for even higher data speeds
• you have much greater flexibility with computer monitors
• you have much greater RAM capacity
and so on ...
x

Unable to capture "Sony Handycam" to iMac

I bought Sony Handycam 2007 and worked on PC windows but this year I bought a new iMac computer but when I captured the video to iMac from the Sony Handycam and it won't open or work.... iMac said that I need to download software called MPEG or MPEG2, so umm do I need to buy a software or download free from internet?? Or do I need to buy new programe called "OS X Lions" I'm new with iMac and patient to learn everything on iMac.

If the Vista install was a standard installation, Vista should recognize the camera automatically and install the correct drivers. Nothing you need to do. Make sure that you connect the firewire cable first between the camera and the on-board firewire connector. Do not try to connect it to the ATI card. Once the cable is connected, turn on the power on the camera and set it to VCR. Vista will then install the necessary drivers automatically and if they have been installed previously, show the autoplay box. Make sure that the menu in the camera is correctly setup to use the iLink connection and the format you shot in, so either DV or HDV. Consult the Sony manual for that. If the does not work, try a different cable first.

IPhoto compatible with Sony Handycam (with mini-DVD)?

I have a Sony Handycam and a MacBook Pro with iPhoto. The Handycam takes decent pictures and video, but it does not have a port for a memory stick. Also, the upload software that the Handycam came with... well... isn't so good. (I'm not sure if it's even Mac-compatible.)
Unfortunately, the Sony Handycam is not listed as one of the "cameras" that iPhoto comes with. (I put the word "cameras" in quotes because the Handycam is more a video camera than a still camera even though it takes still pictures.)
If anyone here knows of a workaround so that I can upload pictures from my Handycam to my MacBook Pro using iPhoto (or other appropriate software in the iLife suite), please let me know! I'm dying to have an excuse to not install the uploading software the Handycam came with.
Thanks in advance!

The Handycam's video format is one that in not OS X compatible. i don't know about the stills, however. I don't believe the mini-DVD disc that it create is Mac readable either. It's designed to go straight to DVD players and display the videos and stills on a TV set.
Do a search in the iPhoto 6 forum for "Sony Handycam" and you'll find previous topics on the subject. You might also try in the iDVD and iMovie forums.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

IMovies 08 use with Sony Handycam DCR-DVD 109

Does anyone know for 100% tried and tested, if you can just plug a Sony Handycam DCR-DVD-109 directly into an iMac using imovies 08 and import home movies directly so they can be edited. Many thanks

I can't seem to figure out how to import video files from the tape.
Since you say tape, I must assume you do not have a Sony DCR-DVD109. As Appleman indicates, "tape" camcorders use the FireWire interface/protocol for tapped video and USB for the Memory Stick "stills."
I looked at iSquint but I guess I'm not sure how it will recognize the tape source any better than the Memory Stick source.
iSquint was recommended specifically for the conversion of VOB ("muxed" MPEG-2) which have already been copied to your hard drive. It is not a dedicated "capture" application.

Scanner and Software for Lion with document feeder to Scan thousands of photos

I have an older HP PhotoSmart Print 7280 that can scan photos. On the PC HP had software that would allow you to scan through the document feeder and batch correct/crop the photos before creating files. This printer/scanner doesn't have HP software for Lion. I am looking for a Scanner or Software solution that will allow me to scan through the feeder and to crop in batches. I have used Image Capture on the Mac to scan. It work great to crop and edit photos if you put them them on the flatbed. You can load 3 photos and it will allow you to crop them and to make them individual files. However if you use the "feeder" setting it treats what you are scanning as a document and you don't have the ability to edit/crop before accepting the files. So what you get are images that have a lot of white space around them.
I am looking for a solution that would allow me to do this in a quicker manner than 3 photos at a time on the flatbed. I Don't rule out buying a new all in one printer to do this. I also looked into other scanning software like VueScan, but it doesn't appear to have a batch edit/crop mode after running through the feeder.
Any advice on how to attack this would be great.
Thanks

tk3900 wrote:
what you get are images that have a lot of white space around them.
That should be easy to fix with something like SintraWorks PDF Nomand or PDF Clerk Pro.

What is best type of 'new' video camera to buy for editing with PE 10?

I currently own two Sony miniDV camcorders (models DCR-HC28 and HC40) and was doing fine in Premiere Elements and recently upgraded to version 10. I was in the process of using the HC40 cam as a 'pass-through' device to digitize some old VHS tapes, and it worked well for copying from VHS to miniDV tape. Then, I could capture in Premiere Elements and edit, etc. (It would never work to pass all the way through to capture in PE in one step using Firewire). Now, the HC40 camera has locked up on me halfway through my box of VHS tapes, and is stuck showing the Time/Date screen and the touch screen seems to be disabled. What to do?
There do exist plenty of used DCR-HC40 and 52s (which also support pass-through) on Amazon for sale in the $200 range, and that is one option. I also went to Best Buys this week and looked at all the new Sony video cameras, and they fell into basically two series: the DCR-SX series, which record in standard definition onto flash memory (SD cards), and the more expensive HDR-CX series, which record in Hi Definition (also on SD cards) but also, I was told, can record in standard definition. The miniDV camcorders are no more, apparently. I am not so enamored of HD recording that I would go whole hog for it, as I am happy with the results I have been getting with my miniDV cameras once burned to DVD or converted to MPEG or MP4 for playing on my iPhone, etc. Plus, HD takes up so much more memory and space on the hard drive compared to standard def files.
I called Sony tech services today to find out that none of the new cameras support the pass-through function for digitizing from old VHS cassettes, so I am looking at buying a VHS-digitizing device as recommended here on the forum such as the ADS Pyro AV Link or Grass Valley ADVC110. Since I would rather spend that money on a new video camera instead of merely the AV link device which I will have no use for once the tapes are digitized, my question comes back to the cameras. Which of the new cameras will be most ideal for editing in PE10 going forward, or is it best to stick with miniDV for now?
Steve G has always seemed to point out that miniDV tape and the ensuing AVI files are the best for PE to work with. Sony told me today that even the SD cameras such as the DCR-SX65SD ($219) now record onto the SD cards in MPEG2 format, and that AVI is a thing of the past that died with the miniDV tapes. I assume MPEG2 still comes out as different clips that one assembles on the Timeline in PE10? One probably could convert the MPEG2 files to AVI, but would that give the same quality as an original AVI file from a miniDV tape? And if MPEG2 is the new standard going forward, do the resulting videos made with PE10 have the same quality as those made from 'native' AVI files? I will buy a used DCR-HC40 miniDV camera if the end result is better than those to be obtained with the brand new DCR or HDR series cameras now available in stores. But if the quality is the same, I could perhaps opt for one such as the HDR-CX 130HD ($349) which also records in SD in case some years from now I decide I really DO want to switch to HD formats.
Any advice on choice/use of the newer cameras and their default formats such as MPEG2 is welcome, in relation to PE10 editing and output capabilities.
Thanks very much,   paultool3

Dear JM and Steve,
Thanks much for your replies. I plan to get my DCR-HC40 miniDV camera fixed so I can use it for pass-through digitizing from VHS tapes. I also recently bought one of the Dazzle Video Creator Platinum capture units ($84 at Best Buys) just to try it, and actually got pretty good results in digitizing a VHS-C tape using a VHS-C to VHS adapter unit to play it in our VCR, and then using the Pinnacle Studio HD (version 15) that came with the Dazzle unit to import and digitize through the Dazzle unit.
The Dazzle unit would not show up in Premiere Elements 10 as an option to capture from, but did in Pinnacle Studio 15.   I used our Sony VAIO with i7 processor and Pinnacle captured the one hour, twenty-five minute- long VHS-C tape to a single 18GB .AVI clip which I then was able to bring into Premiere Elements 10 and use for output in various formats.
When using a less powerful laptop initially, the digitizing failed, with 319 dropped frames in the first 5 minutes.. So it takes a more powerful computer to work with a capture unit like Dazzle, apparently.
I will eventually be shopping around for a new, AVCHD format video camera as well based on your recommendations, but the current group of Sonys in this category, such as the HDR-CX130HD ($349) which record video onto SD cards, are getting bad reviews from CNET, claiming they have poor quality HD and other issues. So for the forseeable future I will be sticking with miniDV using my Sony DCR-HC28 and HC40 camcorders.

Using footage from DVD disc shot with sony handycam

I'm trying to import some footage that was shot with a sony handycam. The camera records directly onto a mini DVD disc. I put the disc in and copied the files onto my desktop. When I import the files into FCP, it recognizes the .vob files, but not the other ones.....so, all I have in FCP is the video, but no audio. Any ideas on how to get the audio into FCP? Trying to avoid playing the mini DVD disc on a player and recording the audio, then importing that and then trying to sync....but will resort to that if necessary.
Thanks in advance.

Get MPEG Streamclip (its free) from www.versiontracker.com. Use this to convert the files from your handycam to QuickTime videos using the DV codec.
Be aware that there will be a loss in quality as you convert your MPEG-2 videos to an editable format. Its unavoidable, and the reason professionals do not use direct to DVD cameras.

Laptop for editing with Adobe Premiere & After Effects CS6

Hi, I'm just started a company working with young people, and I need a laptop for editing some videos (short films/music videos).
I was looking at a cheap laptop to be able to run Adobe Premiere and After Effects smoothly. I was told that this laptop would run smoothly:
http://www.pcworld.co.uk/gbuk/hp-envy-m6-1178sa-15-6-laptop-17419990-pdt.html
Can anyone confirm this? The graphics card is not listed on the Adobe's website but I was told it's compatible?
Im new to this stuff so please help, thank you.

How realistic are the system requirements Adobe posts on their site?
System requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor with 64-bit support; Intel Core®2 Duo or AMD Phenom® II processor required for Adobe® Premiere® Pro, After Effects®, and Encore®; Intel Core i7 processor required for Adobe SpeedGrade™
Microsoft® Windows® 7 with Service Pack 1 (64 bit) and Windows® 8. Refer to the CS6 FAQ for more information about Windows 8 support.*
2GB of RAM (4GB recommended) for 32 bit; 4GB of RAM (8GB recommended) for 64 bit
14.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
Additional disk space required for disk cache, preview files, and other working files (10GB recommended)
1280x900 display with 16-bit color and 512MB of VRAM; 1680x1050 display required, and second professionally calibrated viewing display recommended for SpeedGrade
OpenGL 2.0–capable system
Sound card compatible with ASIO protocol or Microsoft WDM/MME
DVD-ROM drive compatible with dual-layer DVDs (DVD+-R burner for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
Java™ Runtime Environment 1.6 (included)
Eclipse™ 3.7 (for plug-in installation of Adobe Flash® Builder®); the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playback
Dedicated GPU card required for SpeedGrade (for optimal performance in SpeedGrade and for GPU-accelerated features in Adobe Premiere Pro and After Effects: NVIDIA Quadro 4000, 5000, or 6000 or other Adobe-certified GPU card with at least 1GB of VRAM recommended); visit www.adobe.com/products/premiere/extend.html for supported cards
Optional: Tangent CP200 family or Tangent Wave control surface for SpeedGrade
Optional: For SDI output, NVIDIA Quadro SDI Output card required for SpeedGrade
Optional: 7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
You have to be from another world to believe these requirements. Note the last optional statement. Up to and including CS4 this stated:
Dedicated 7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured) for video products.
Nobody in his right mind believes that system requirements get lower over time. It is purely a marketing lie to artificially lure prospective buyers.
The requirement to have two physical disks for CS6 is bogus.
If anything is bogus, it is the system requirements from Adobe and only fools would try to use a system with these minimum requirements, like this:
Pentium 4 with 4 GB of RAM, 24.5 GB of hard disk space is enough according to them.
Harm is confusing editing with getting high PPBM scores, I am afraid - again. Not all projects have 10 layers of H.264 stacked with heavy effects for two hours straight. The vast majority of editing is simple transitions and effects with 10 minutes of YouTube encoding twice a week.
Wrong assumption. I was thinking of a simple DV timeline with one single track. And however much you dislike the PPBM benchmark, it is the only available tool to show how well a system is setup and in balance. Question: Is your dislike of the benchmark based on the fact that your favorite HP Z820 does not do well?

Looking to buy new MacBook Pro for editing with Premiere/After Effects, but wondering about trade-off between Processor Speed and Graphics Card

I'm a professional video editor (using Premiere and After Effects) looking to buy a new MacBook Pro and am deciding between two models. The slightly older model has a 2.8GHZ i7 (3rd generation) Quad Core processor with a 1GB SDRAM of NVIDIA GE FORCE GT 650M Graphics Card. Then newer model has a 2.3GHZ i7 (4th generation) Quad Core preocessor with 2GB SDRAM of NVIDIA GE FORCE 750M/Intel Iris Pro Graphics Card.
Which makes the most difference (processor speed vs. graphics card) with editing with Premiere and After Effects?
Any help/guidance would be greatly appreciated.
Thanks!
mike

Poikkeus wrote:
1. Your MBP will be somewhat slower than your iMac, as reflected in the general speed; desktop Macs have more RAM and storage.
You recon? If he get's the 17", he would have up to 8x more RAM, 4 x more GPU,, and a bit faster CPU;.
2. Be aware of the advantages and disadvantages of extra RAM. Loading up the slot will make juggling multiple applications easier, like Photoshop, VLC, and Safari. However, more than 4gigs of RAM will make loading your MBP on startup twice as slow - at least a minute, probably longer. That's why a MBP user with extra RAM should sleep their machine nearly always when not in use, rather than powering off.
I did not know this, I just upgraded from 4gb to 8gb the other day. Have not noticed it being slower, but I don't often shut it down. It's nice to not even have to bother with ifreemem.
3. Additional storage and RAM will maximize the basic capabilities of your MBP, but you won't be able to make a 2.3ghz machine any faster than it already is.
SSD
4. I still feel that your iMac will be faster than your prospective MBP. The only way to dramatically increase the speed would be the installation of a SSD drive (like the lauded OWC series). But they're not cheap.
I don't want to rain on your parade, but want you to get a more realistic idea of your performance.
I chose a macbook pro, 17" of cause. I use it for gaming. Yes a iMac is better for gaming. But, it's nice to be able to move around. Set up a man cave in the lounge 1 week, or in the bedroom, the next. But you fork out a lot more dosh for that luxury. And yes, not as much power as Poikkeus has said.

ITunes 9 install problem: software for communicating with ipods not install

I downloaded and installed the update for iTunes 9 via apple software updater last night, and when I started iTunes I got the error "The software required for communicating with iPods and Mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?" I click yes, and it says it couldn't fix the problem.
I followed the instructions here (http://support.apple.com/kb/HT1923) to completely uninstall itunes and quicktime and all supporting components, including mobileme and bonjour and then reinstalled iTunes9 using the setup file downloaded from apple.com. Still no luck! I get the same error when I start iTunes.
any suggestions? Help! Should I go back to the older version of iTunes?
btw, when I uninstalled iTunes, I kept my library files and two plugins around: last.fm scrobbler and mmkeys. Does this matter? I don't think so: I tried removing the plugins and I still got the same error.
I'm running Vista 64bit, and I used the 64 bit installer.

For those using Windows 7 64-bit, I also experienced this frustrating installation error. However, tonight, I was finally able to install iTunes 9 without getting the communication message by setting the compatibility tab under the properties tab of the installer to the following settings:
- check "run this program in compatibility mode for Windows Vista Service Pack 2"
- check "run this program as an administrator"
- launch the installer by right-clicking and selecting "run as administrator"
After selecting those options and also uninstalling iTunes and the Apple Mobile Device Support, iTunes 9 finally installed without any glitches on my Windows 7 OS.
Unfortunately, I don't have any advice for Vista users except for the already posted recommendation to use the 32-bit installer.
Message was edited by: Peter Lee

SOFTWARE FOR EDITING WITH SONY HANDYCAM ON IMAC

Similar Messages

Maybe you are looking for