Software for managing SNMP Pix failover traps
Hi, we need to monitor pix failover with snmp. Going through the pix readme shows as example how to do with Cisco Works for WIndows. Is this the only cisco product that can manage this? We are using LMS, is there a way with LMS to monitor failover events?
Kurtis Durrett
Thanks!
The command originally didn't work by itself, but after come changes to the other SNMP configurations the traps were then received.
SNMP configurations below:
Switch#show run | inc snmp
snmp-server community (removed) RW 5
snmp-server trap-source Vlan411
snmp-server chassis-id (Removed)
snmp-server enable traps fru-ctrl
snmp-server enable traps entity
snmp-server enable traps envmon fan temperature
snmp-server host *.*.*.* (Removed) fru-ctrl envmon
Logging:
Switch#show run | inc log
service timestamps log datetime localtime
logging buffered 16384
logging trap notifications
Similar Messages
-
Internet cafe software for managing 27 iMac Intel based
Dear all,
I am planning to setup a 27 iMac based internet cafe.
Do you know any software to run a typical internet cafe with Point of Sale for products and time and account management?
With best regards,
2pacyCheck out Hodoman Timer for an inexpensive product that claims to do what you need. Alternatively, ExpressPay, the same system used a Kinkos stores for billing copyier time, also supports Macs - although there's probably a higher up-front cost to their system.
-
My software for managing the NAS 220 crashes
Hi
Since I have installed Lion the software (Black Armour Discover) to manage my Seagate NAS 220 6TB Network Drive crashes. Is anyone else having this problem? The server still works and responds but I can't manage it.
Does anyone have any suggestions? Is there a way to manage directly from LionBack up all data, then follow the instructions in the support article linked below:
iPhoto '11: If you see a message that iPhoto can’t access one or more photo files
If you still have problems, try the other options in the "First Aid" dialog. -
I use the Darwin Streaming Server (~QuickTime Streaming Server) on Windows and look for some Windows-Tools with functionality/features like
- "QTSS publisher (QuickTime Streaming Server Publisher)" or
- "QTSS broadcaster (QuickTime Streaming Server Broadcaster)".
-Tools for create and editing chapters and export (Client and Server) Movies in a fast and efficient way (I must edit very long and many many movies!).
Other Windows-Tools around QT Server / Player are also welcome!My Canon EOS Camera can also capture 1080p Video it writes it to the memory Card as Name.MOV. I don't do video the file are huge. But you
made me want to see what CS6 video support could do to reduce the file size.
So I took one of my captured .mov files and droped it onto Photoshop the .mov file was 264,678,777 byte in size. I saw the Photoshop could render H264 .mp4 video anf that there were some presets for YouTube at 29.97 the rate my camera does for 1080p, 720p and SD 360p I also tried createin a 854x480 16:9 video 480P
These are the size file produced 480 make no sence it so close to 720 file size.
Canon EOS.MOV 264,678,777
CS6 H264 mp4
YouTube1080p 45,651,351 http://www.mouseprints.net/old/dpr/YouTube1080p.mp4
YouTube720p 29,193,697 http://www.mouseprints.net/old/dpr/YouTube720p.mp4
YouTubeSD360p 6,172,199 http://www.mouseprints.net/old/dpr/YoutubeSD360p.mp4
YouTube480p 29,190,029 http://www.mouseprints.net/old/dpr/YouTube480p.mp4 -
I use the Darwin Streaming Server (~QuickTime Streaming Server) on Windows and look for some Windows-Tools with functionality/features like
- "QTSS publisher (QuickTime Streaming Server Publisher)" or
- "QTSS broadcaster (QuickTime Streaming Server Broadcaster)".
-Tools for create and editing chapters and export (Client and Server) Movies in a fast and efficient way (I must edit very long and many many movies!).
Other Windows-Tools around QT Server / Player are also welcome!Have a look at http://www.movieoutline.com/features.html which in essence is a very nice scripting tool, not so much a project planning tool. Another nice tool is http://celtx.com/overview.html
-
I wanted to know if there is any software for management of code from sun ??
.. something like Visual Source Safe ...
If you know any others used popularly please let me know.. I am looking for something easy to use for windows users...Actually everyone will be using it... so i waslooking
for something easy for windows users to use.
CVS is more command based.. and I dont see Visual
Source Safe going anywhere... They dont have Visual
Source Safe.NET also..In my opinion Subversion and using the tortoiseSVN
client for win32 (http://tortoisesvn.tigris.org/) is
so infinitely better than source safe, it's laughable.
And its free!Unfortunately I'm stuck with VSS at my company, but thanks for the heads up on Subversion, dmbdmb. I didn't know about it. -
Opensource tool/software for code management
Hello everyone,
I am looking for an opensource software for managing code .. Does anyone know any ?
I have never personally used CVS but its version control? Is it like Visual Source Safe?
If you have used anything .. can you tell me which ones u used?I am looking for something that is web based... when I
looked at CVS... I am not sure if its web based..That term is too generic.
Can you use it via a network (and via the internet) - then yes.
Can you normally use it from a browser - no. But then I would suppose that before you can set up CVS (or any version control system for use via a browser) you must first have a web server. Do you have a web server? -
Need Backend Software for Shopping Cart
I have been looking into a Flex Store but I am concerned that
I can not find any backend software for managing an oscommerce
store. I have read that Flex is not good for Search Engines or for
SEO optimization. Can anyone advise me if it is possible to have a
working Flex OScommerce site or is it just not a good idea.
Thanks...For the SEO issues, Look at
http://www.onflex.org/ted/2007/08/flex-directory-seo-and-flex.php
and
http://www.riapedia.com/2007/03/28/having_problems_with_flex_and_seo_help_may_be_on_the_wa y
It's on Googles Radar and as RIA's advance the user
experience they will be forced to deal with it. Personally, I think
Ted's solution would work well for most eCommerce sites. As far as
the "Backend" for the Flex Store, while the App is a good start,
there are many features the best carts have that would take quite a
while to build into this one. News, sales, reviews, most viewed
items. Then there is the credit card and Paypal gateways and the
shipping company interfaces. Then there is the administration piece
for managing all the products, tax schemes and all the other
systems features that the user never sees, but have to be managed.
All require a robust backend either written in a solid scripting
language (PHP, .Net, Ruby) or Java EE, with interfaces to the
client.
Not to discourage you, but the manner in which you asked the
question indicates this may be a project beyond your current skills
and experience. However, The Flex Store is an excellent application
to start from. I would recommend tearing it apart and learning a
great deal from it about FLEX before looking into what it will take
on the backend.
If you need some help, private message me as I have a
customized Flex Store I am working on right now, It is for my
Yamaha Dealer, and people will be able to do everything the
application does now (and a little more), except instead of buying
bikes online, they will email their list of choices along with
their contact information to the dealership from what is now the
purchase button. This is something I can do and use XML or a simple
Java backend for the products. It already works with XML, so
adapting it to a Java Data driven backend will take some time, and
I've got years of experience at this!
Good luck! -
Need software for Intel ESB2 SATA RAID Controller for Windows 2012rR
I have installed Windows 2012r2 on my HP XW8600 and I found the software for the LSI Adapter (SAS 3000 series) but I am unable to find the software for management of the Intel ESB2 SATA RAID controller. The only software I could find was listed as a Windows 7 application but will not install onto my Windows 2012r2. Thank You
That looks exactly like the software I tried and an error reported this software will not install on this platform. I will try again tonite and see what happens. I will test all the apps on that list starting with the latest and see what happens. I thank you for your help.
-
Management software for VIC [M81KR] card "Cisco VIC Ethernet Interface" - Win 2k8R2
Hi,
I am configuring a blade presently that has a VIC (M81KR) card installed.
In the UCS profile, I configured 4 vNICS
- 2 vNICS for Public (One on Fabric A, one on Fabric B)
- 2 vNICS for Private (One on Fabric A, one on Fabric B)
I have installed the OS (Win Server 2008 R2) and the Ethernet Drivers (Cisco Ethernet Driver).
What I want to be able to do is to bond/team the links together and tag VLAN traffic.
-- I've downloaded the Utility ISO from Cisco, however there is no management software for the VIC (That I can see). There is only software for:
+ Broadcomm, QLogic & Emulex..
Any assistance is appreciated!
Cheers, Chris.Just to add to Simon's comments, we rely on fabric failover rather than a teaming driver. This take the load off the host and puts it on the adaptor hardware.
The only other use case I've heard of for the teaming is in full width blades such as the B250 & B440, where customers may want to team across the two adaptors for great redudancy. As the MTBF for the adaptors is extremely high, this wasn't seen as a priority/concern. If you have another business or technical requirement that FF will not solve, please let me know so I can feed this back to our development team.
As for the VLAN driver, at present you need to configure unique NICs for each VLAN. I've pushed on this request for some time and I'm told it has been planned for a future release. I'll check to verify which release the Palo VLAN tagging driver (for windows) is tentatlively planned for and get back to you.
Regards,
Robert -
Different Source Address for a SNMP trap paquet
We use a common platform to manage the CISCO routers for several customers. We are using to manage the devices w/ a loopback address as source of snmp paquet.
We use something like this ...
Router(config)#snmp-server host 172.25.1.1 ORATRAP
Router(config)#snmp-server trap-source loopback0
Router(config)#end
Now, there is some customers that request us to receipt the snmp-traps w/ an ip source of their own ip space (192.168.2.x/24).I cannot imagine how this can be achieve?... Please any idea?. Thks. Eduard.Thks., for your help. This is important matter to us. We also working in the idea of snmp track collector close to our own NMC... but this may cost also money... . So, we are going to try another approach first..
Somewhat like this below....
snmp-server enable traps
snmp-server informs
snmp-server source-interface traps
snmp-server source-interface informs
snmp-server host traps version 1 community string publicCust
snmp-server host informs version 2 community string publicBT
For the get's every MNC sends to the declared IP, so We thing that will use the same IP in answer.
I will let you know. Eduard. -
Best project management software for mac
Does anyone have any recommendations for the best project management software or strategic planning software for imac??
ThanksIf you are willing to spend money on professional tool with free support, if the team get's large, I would ask you to look at ConceptDraw Project. If you are dead set on open source and "free" software I would say that Redmine, Bugzilla or any other that has been around a while, and looking for plugins to make it suit your needs is one of your best bets.
-
Software Configuration Management for ABAP Development ?
Hi,
we are a software company selling a Data Capture Solution.
For this, we are currently in the process to develop an interface for transferring the extracted data into a customer's SAP R/3 system.
Since we want to develop this interface following certain software engineering principles, we are looking for a way to solve certain simple common Software Configuration Management issues, such as:
- Object Versioning (Similar to file versioning in classic software development): That means being able to:
-- Keep track WHO changed WHAT WHEN and WHY?
-- Revert to a former version of an object (e.g. when the fix of a former defect must be revoked for some reason)
-- Keep track which changes have been made for a certain Change Request (NOT meaning SAP Change Requests, but Change Request for our interface development)
- Label a certain version state as 'released' or 'tested' or whatever
- Perform a kind of 'Branching' (Classical Software Configuration Management task), e.g. when we release a version of our interface and start the development of a new version, we must open a 'Maintenance Branch' of our released version parallel to the ongoing development of the future release.
When I say 'Objects', I mean everything being concerned when developing something within R/3; that can be ABAP programs, forms, tables (structure and content(!)), etc.
We are using an SAP System version ECC 5.0 for development; as for now, we have come to the conclusion to use the versioning that comes with the Transforms, although they do not really cover the above requirements as we would like to.
Is there anybody out there who had the same idea and solved it somehow?
My impression is that in the SAP world, classical Software Configuration Management is not a part of the way of thinking; and that development for SAP R/3 has little in common with classical software development.
But maybe there is an add-on or some hidden features of NetWeaver or anything that can solve these issues.
Hope is the last to die...
Thank you very much for any feedback,
Regards,
JörgThank you very much for your answers!
@Pushkar:
No this is not exactly what I meant;
What we want to do is a kind of classical configuration management or at least version control of
development objects like ABAP programs, table definitions, table data etc. that are contained within our SAP development system.
It's not about version management of external documents imported into SAP.
I know that there is a kind of version control via Transports, but this does not cover all classical version control mechanisms; what we are missing there is
- the possibility of reverting to an older version of an 'object'
- Branching / Merging mechanisms
- the possibility to choose which changes I want to release with which transform and which objects
- view differences between arbitrary versions of an object
I was hoping there is maybe a kind of 'add-on' or maybe even a built-in tool that provides classical version control mechanisms or something similar.
Thank you for further help,
Regards,
Jörg -
I tried sending an e-mail through NI.com and never got a response, so I thought I'd try the forums.
I'm interested in purchasing the course materials for "Managing Software Engineering" and "Advanced Architectures" as part of my CLA prep. There aren't any courses being taught in my area, and nothing seems to be scheduled for an online course. I couldn't find the information searching through the course pages on NI.com.
Does anyone know how much it would cost to get just the course material for self-teaching?
Thanks.
http://linkd.in/mikeleHi,
You can purchase the course kits.
Here is a link.
http://sine.ni.com/tacs/app/fp/p/ap/ov/lang/en/ol/en/oc/us/pg/1/sn/n5:selfpaced/
You can go to each link, and within the links there is a link to add the product to the basket, so to speak.
Here is some more FYI, sometimes these links can be a bit hard to find.
Here is a link for the online courses. http://sine.ni.com/tacs/app/fp/p/ap/ov/lang/en/ol/en/oc/us/pg/1/sn/n5nline/
Inside each link you can see the schedule for that course.
Also, at this link you can look over a schedule of courses for your area and online, it shows them all on one list. http://www.ni.com/training/
Under the section "Build your knowledge with training", there is a link "find a course near you". On my PC it defaults to my area.
Mark Ramsdale
Project Manager and CLD
Customer Certification and Training at National Instruments -
To Expert
i need to know about management software for Access Point i know that there is WCS which work as Management software but it deploy on Controller and manage only LAP
Thanks/RegardsFor autonomous, Cisco has the WLSE:) or you can look at 3rd party management tools like Wavelink http://www.wavelink.com/solutions/management.aspx
Scott
Maybe you are looking for
-
I am having trouble using itunes with my ipad. I connect my ipad to my PC and itunes. I go to apps and on the lower half my app for pages comes up. On the right are the documents that are on my ipad, except that some documents that I have deleted
-
Restrict copying text while allowing commenting
I'm using Acrobat 8 Professional. I need to restrict users from copying or editing the pdf text, but I want to allow users to make notes the pdf, like adding comment and highlighting text. I tried to set password security in "Restrict editing and pri
-
Safari will not open pdf files. I have 8.1.3 and this is still an issue on my phone and tablet. It will not allow to open Safari files in iBooks either. Is there a solution?
-
Problem with capture image from wc
hi all, i want to capture image from my webcam and play it, but it's not work please help me, here's code public class Demo extends JFrame { * @param args public static void main(String[] args) { // TODO Auto-generated method stu
-
Hi Team, I would like to know how the FEBKO table gets filled as I need to find out how the field KUKEY in the table FEBKO gets filled. Please help me. This field is displayed in FEBAN transaction.