Software install discs

Can I take Photoshop CS5 install discs thru airport xray security without them being damaged?
Would putting them in an anti static sleave help?
I have an anti static sleave that came with an internal HD, which I can use.
Thank you.

The information on CDs and DVDs is stored physically and not through magnetic fields and therefore won't be affected by xrays.
(82556)

Similar Messages

Flashing question mark/software install disc problem

Hello,
I'm getting the flashing question mark at reboot. I've followed these steps:
a. Insert the Software Install disc that came with your Mac.
b. Restart the computer and immediately press and hold the C key to start up from the disc.
c. When you see the Installer screen, choose Open Disk Utility from the Installer menu.
d. Select your hard disk volume in the left pane, click the First Aid tab, and then click Repair Disk.
e. When it's finished, restart your computer.
HOWEVER, when I restart my computer it STILL reads/loads from the install disc (as opposed to just booting from my hard drive). It's like a endless loop I can't get out of. Am I doing something wrong?
Any suggestions?
- Davey

Here's Apple doc.#106178 on Startup Manager.
Or restart while holding down the "X" key to bring you to your OS.
Cheers!
DALE

G5 Software install disc/restore broken

Does anyone know the process of obtaining a new Powermac G5 Software Install and Restore Disc? I was running disc utility today and it said I had tons of problems. So I open the packaging that has my restore disc in it only to find out it shipped with a 1" long crack in it. So well for booting and reparing my drive.
Anyone know the process of getting a replacement. I tried searching on the apple site but nothing.
Thanks,
adam
Powermac G5 Dual 2.3 Mhz Mac OS X (10.4.4)

Reminds me of the day I bought OS 8.5. I spent two hours round trip from the store only to find that the CD was cracked in half. After another two hour trip back to the store for an exchange I was finally able to install the new OS.
I'm sure if you call AppleCare they will send you a replacement pronto.

EMac software install discs on iMac, will it work right?

Hello, I've a couple of G3 iMacs that I've installed OS 10.3.3 on. The discs used are for eMacs (2 sets of discs) they came with universal installers. What I'm wondering is, is the build of OS 10.3.3 specifically for the eMac and the G4 processor or should they work fine with my G3 iMacs? I'ved had issues with older pre os x learning games for kids on these iMacs and am wondering if this could be the problem. I did not install the additional software and apps on disc 2 of the eMac software restore discs, but did use the OS 9.2.2 classic support install disc from my G5 iMac to install classic support on to the G3 iMacs. It sounds like maybe I've left myself plenty of room for problems to arise.
Hope you all can help clear this up for this computer late starter.
Thank You!
EZ
iMacs G5 & G3 Mac OS X (10.4.6) 10.3.9 on G3, Direcway 6k cnsmr sat. cnct., netgear ethernet swtch to 2 cmptrs.

Sorry, I got the wrong forum.

Software Install Disc Won't Boot

Please help, I found a Power Mac G4 that somebody had thrown away(M# 5183 450 MHz DP/2X1M Cache/128 MB Ram It has vertical sound ports and a AGP Card. Has the year 2000 on back) . It would not boot, I found a pinched wire on the power supply, now it boots with some version of X. But it is password protected, I want to wipe the drive and install an OS from an install disc I got off ebay(For a Power Mac G4 year 2000 SSW version 9.04 691-2739-A).
Now the fun begins. The CD will not boot with C depressed, I've tried resetting the PRAM, and sometimes I get a screen telling me to reboot and after I do the protected os will load. I tried booting with cmd-opt-O-F; this said I had a power mac 3,3 3.1f1 BootROM built on 6/28/00. Tried booting with options depressed it just shows me the drive I want to get rid of. Tried cmd-opt-shift-delete on startup nothing would load as long as the keys were down, the protected os loads when they are released. I also tried moving the jumpers on the hd from master to cable select.
Do I need an osX install disc to get rid of X ? any thoughts would be appreciated .
G4 Mac OS 9.0.x

Hi, macaraina -
Welcome to Apple's Discussions.
Your G4 450MHz DP machine is a Gigabit Ethernet model. Those models originally shipped with a model-specific version of OS 9.0.4; later models may have shipped with OS 9.1.
I suspect the CD you got on eBay is not valid for your machine.
In addition, the version of Drive Setup that came with OS 9.0.4 and earlier had a defect - when used to format a drive as Mac OS Extended (which is the correct format for OS 9 and also valid for OSX), such as when wiping a drive, it can leave the drive vuknerable to getting a wrapper error.
Article #31056 - HFS Wrapper Partition Damaged
For those reasons, particularly the second one, I suggest you get either a retail OS 9.1 Install CD or a retail OS 9.2.1 Install CD - either is suitable for your model. All retail OS 9 Install CDs those are white, with a large gold 9 on them; the retail OS 9 Install CD's have a universal installer; model-specific Install CD's do not.
You can often get retail OS 9 Install CD's in various versions at sites like these -
http://macsolutions.com/
http://www.allmac.com/
http://store.yahoo.com/hardcoremac/index.html - Apple Reseller
http://www.applerescue.com/

Laptop stolen and software install disc's as well

Hi, I was burgled does anyone know if apple will supply me with new discs? I purchased an upgrade from 7 and I still have my dongle. Can anyone advise me how to go about this and who/where/how to contact apple to ask.
Thanks Phil

At least you have your serial number, so assuming you can source the media you will be fine.
Same thing happened to me earlier this year, though in my case it was the hardware dongle for Cubase that was stolen. I still have the install disks and the serial number, but without the Syncrosoft license key it is useless. With iLok things would have been ok, but as a result of the dongle policy, the net result is that I would have to buy a new copy of Cubase. Instead I decided to stick with Logc and use it on the shiney new Macbook Pro and iMac that was supplied.
Steinberg's loss, Apple's gain (I replaced Nuendo with Logic last year).
These things are difficult and it's horrible that it happened at all, but with any luck something good will come out of it all in the end.

Which Software Restore Disc?

For some reason, iMovie 3 has been acting up on my MDD. Launching each time gave me the interface for half a second, and then the whole LCD screen went black. I had to force quit. After trashing iMovie, I connected to my other MDD which runs iMovie OK, same version, and imported the application over to it, but I still get the same issue.
So I have 4 gray Software Install discs...one of which has iMovie on it. Can I do a custom install of just that app? And which disc might that be on? Also, what do you think the problem was in the first place? Something to do with a pref needing to trashed? Restarting didn't help.
Thanks~!

Hi again Keith,
I don't think it's going to help to reinstall, the copy of the APP should have worked.
Usually iMovie would be on a separate iLife Disc.
I think I'd try this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.iMovie.plist
/Users/YourUserName/Library/Preferences/com.apple.iMovie3.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Can I restore my system from install discs when DVD drive is not working?

Can I restore my system from install discs when the DVD drive in my iMac G5 is not working?
There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
Is my only option to open up the iMac and get the jammed disc out?
Thanks

You need to set up the FireWire Target Disk mode installation with the iMac as host, so that it runs its own install disk. The G5 tower should be the target, so that you are "borrowing" only its DVD drive.
Shut down the iMac. Put the iMac install disk into the G5 tower, and reboot the G5 tower into TDM by holding down the T key. Connect the FireWire cable and then restart the iMac while holding down the option key. Hopefully the iMac startup manager will see the install disk that is in the tower; if so then select it and boot from there.

Reinstall of Tiger Missing Garageband; Software Install cd?

I noticed a previous post on this same issue. I, too, had to reformat my hd, and reinstall Tiger. In the process, Garageband was dropped. If the reply to the author's post is correct, the Tiger DVD Install Disc does not have Garageband on it? The app, he was told, is part of a Software Install cd? Unless that's Disc 2 of the OS X Install DVD's, I don't believe my first generation G5 came with a software install disc. What are my options? Buy iLife?

Hang Time,
Yes, Disc 2 only contained OS 9.2, etc. However, the prompt I got when I attempted to open Garage Band was:
Instrument Library is invalid!
The instrument library is invalid. GarageBand expects a valid instrument Library folder in/Library/Application Support/GarageBand.
Please choose a valid instrument Library folder or quit and reinstall GarageBand.
And a previous post prompted me to look at the backup I made before my hard drive got wiped clean, specifically:
/Library/Application Support/Garage Band/Instrument Library.
I determined that the Garage Band folder was missing from my reinstall of Tiger, and dragged it's contents from the external hd into my G5. It appeared that a copy was successfully made(a lot of files got transferred), but when I clicked on the Loop Browser, I got the prompt that there were no loops present, and the buttons were all grey. Why can't I access these Apple loops? Any idea? Your help would be appreciated.
Thanks,
Bill

Leopard install disc

The hard drive on my macbook died (13" white with osx10.5.8 installed) I replaced the drive and reinstalled the software but my disc had no installers for iphoto or imovie. The software was on the computer originally. Do I need to purchase ilife to get the software. I always assumed they were on the installation disc and never backed up the actual programs.

The original software included with the computer at point of sale,
was a two-disc installer set. The first disc is a bootable install-
restore disc with most of the original software and the second
disc includes some apps and extras; in some configurations, both
discs would be asked for, in process of restoring the original goods.
Some computers may have included more than two software discs.
Did the computer ship with Leopard 10.5? Some earlier white 13"
Intel-based Macs shipped with a special version of Tiger 10.4. The
first Intel-based MacBooks shipped in about 05-2006 ~ 11-2006.
The 'Late-2007' MacBook 13" computer was the first to ship with
Leopard 10.5, and Mid-2009 was last to ship Leopard, 10.5.7.
The Mid-2009 version was the transition, as later it had 10.6.x.
The original software install disc #1 would also include an official
version of the Apple Hardware Test in a partition on that DVD; it
requires a different key on start-up to launch, than to boot installer.
If you have a Leopard 10.5 install-restore DVD for that computer,
the disc #1 should have this Apple Hardware Test.
The second disc would have the rest of the applications, including
iLife, and other apps offered with the unit at time of sale.
If you are missing discs or have a damaged disc, you could contact
Apple Sales by phone, and have your computer serial number handy;
there is a fee for replacement software. 1-800-MY-APPLE. Or you
may also be able to contact AppleCare by phone to get this item.
You should also be able to better define the computer model you have
and other details by using a serial number identifier web site; where a
serial number is entered and configuration info appears on their page.
Or, check the discs you have against the OS X version shipped with
similar Macs by using MacTracker's database app. Download it from
http://mactracker.ca web site and check your hardware version specs.
Good luck & happy computing!

Can I restore my system from install discs when DVD is not working?

Can I restore my system from install discs when DVD is not working?
There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
Is my only option to open up the iMac and get the jammed disc out?
Thanks

Problem solved - I posted on the general Tiger Discussions as well.
I had the wrong machine started in Target Firewire mode.
http://discussions.apple.com/thread.jspa?threadID=2180754&tstart=0

Dutch iMac tray loader software install problem

Hello there.
I've got a near mint, boxed, tray loading iMac that I acquired for a collector friend of mine. It was originally sold in Holland and has a Dutch version of OS 8.5 installed. Not speaking dutch I cannot work out whether I can change the language within the current install.
Also I have been unable to install an English version in it's place. I have an appropriate English set of discs for the right model but when I put in the software install disc it says it cannot mount an image to install the software. When I put in the software restore disc it says the hard disc is locked and tells me to quit. I'm not familiar with this early type of iMac, my first iMac was a slot loader and that was a long time ago so I am at a loss as what to do.
My friend is coming to collect it tomorrow and I promised him I could get an English copy of the OS onto it. It's midnight here. (doh)
Can I install a copy of OS9 over the top? I have the discs (OS 9.1 I think) from my original slot loader.
Rapid solutions will be gratefully received !!
Cheers, L2K8

Hi Kenichi,
You read my mind !
I didn't start from the disc last time so was just trying that when you posted. I get further in the process if I ignore the 'no destination' message and it starts to install then stops saying 'No destination chosen'.
I have the original Dutch 8.5 discs and a set of original English 8.5 discs from a trayloader but they all stall at the choose destination point. There is no disk available to choose.
Can I erase the hard drive from one of the install discs in the optical drive like you can with disc utility on OSX ? Maybe that would override the locked disc problem.
Cheers, L2K8

Bought a new iMac 27" yesterday. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

update manually,: http://www.adobe.com/downloads/updates/

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I down

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here. The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

Hi Jeff,
Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
Sincerely yours.
Peter

Just got a macbook pro, no disc drive. how do I install disc-based software? Do I have to buy an external drive? ARgh.

Just got a macbook pro, no disc drive. how do I install disc-based software? Do I have to buy an external drive? ARgh.

Yes, an external drive will be necessary. You may purchase the Mac superdrive from the online store or one from another manufacturer. All will work.
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
Ciao.

Software install discs

Similar Messages

Maybe you are looking for