Software Installation fails via GPO

GP SERVER:
Windows Server 2008 R2 Standard 64 Bit
CLIENT PC's:
Windows 7 Professional 64 Bit
DEPLOYMENT INFORMATION:
General:Deployment
type - Assigned
Deployment source - \\SERVER\FOLDER\MSI.mis
Uninstall this application when it falls out of the scope of management - Disabled
Advanced Deployment Options:
Ignore language when deploying this package - Disabled
Make this 32-bit x86 application available to Win64 machines - Enabled
Include OLE class and product information - Enabled
Permissions:
Allow
XXXXXXXX\Domain Admins
Full control
No
Allow
NT AUTHORITY\Authenticated Users
Read
No
Allow
NT AUTHORITY\SYSTEM
Full control
No
Allow
XXXXXXXX\Domain Admins
Read, Write
Yes
Allow
XXXXXXXX\Enterprise Admins
Read, Write
Yes
Allow
NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS
Read
Yes
Allow
NT AUTHORITY\Authenticated Users
Read
Yes
Allow
NT AUTHORITY\SYSTEM
Read, Write
Yes
Allow
CREATOR OWNER
Read, Write
Yes
Administrative Templates:
Startup policy processing time – Enabled 30 seconds
Always wait for the network at computer startup and logon - Enabled
Error(s) on test client OC:
Sourced from Windows Logs > System
Error 1 - "The install of application XXXXXX from policy XXXXXX install failed. The error was: %%1612"
Error 2
- "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was:
%%1612"
Based on the information above, is anyone able to advise if there is anything I have overlooked?
Jeet S

Good Morning,
So despite numerous variations and permission settings we are still experiencing problems with this. So this is what has been done so far –
The msi file has been moved to another location on the network which we know works for other msi files –
This did not work although when we check event viewer, gpresult and RSOP the policy is being applied but the software installation is failing.
Added domain users to local admins. The share folder containing the source msi has
Everyone setup for read and execute permission –
This made no difference
Tried running the msi file logged in as administrator and also tried running the msi whilst logged in as myself –
The msi runs fine for administrator but will not run when logged in as myself and gives the following error:
Software installation failed due to the error listed below. The installation source for the product is not available. Verify that the source exists and that
you can access it.
The msi contains an upgrade to our antivirus software. I setup two machines one with the old antivirus software installed on it and the other without any antivirus software on it. Logged in as domains users on each machine and did a gpupdate /force /boot
After logging back in I ran RSOP and found that on the machine which had no antivirus on it to begin with there was an error for software installation stating –
Fatal error during software installation. For the machine that had antivirus already installed on it there was no such error and the software installation states that the installation was successful and yet the new A/V software is still not installed.
This morning I got in early to try and do some more work on this but my boss was already here and advised that even a login script will not work so he has installed it manually on one of the machines and it appears to have worked fine. Not really sure where
to go from here.
Jeet S

Similar Messages

Software Installation issues via GPO

Hi there,
I have created a new GPO (computer configuration) that deploys Sketchup Pro 2014 to computerson the network.
My tester computer refuses to install it.
Here are the System Events i receive:
Event 101:
The assignment of application SketchUp 2014 from policy Application Delivery - Sketchup 2014 failed. The error was : %%1274
Event 103:
The removal of the assignment of application SketchUp 2014 from policy Application Delivery - Sketchup 2014 failed. The error was : %%2
Event 108:
Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was
: %%1274
Event 1112:
The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before
the next startup or logon for this user, and this may result in slow startup and boot performance.
I restarted the machine a few times with no result.
I also have: [Computer Configuration\Policies\Administrative Templates\System\Logon\Always wait for the network at computer startup and logon = enabled]
All of my computers are equipped with SSD drives, not sure if that would matter, i had a heck of a time with GPOs and SSDs before.
Any help?
Thanks,

I think I just found a solution.
As per this
thread:
Computer Configuration > Policies > Administrative Templates > System > Group Policy > Policy > Startup policy processing. Change from default to Enabled and 30 sec.
Does the trick.

GPO Software installation failing

Good Day,
I have a very simple MSI file (Screwdrivers) that I am trying to deploy via GPO. The permissions to the network share have both Authenticated Users and Domain Computers have both read and write rights.
Yet the workstations fail to install with the error message below.
The install of application ScrewDrivers Client v4 x64 from policy Install Screw Drivers failed. The error was : %%1612
thank you
Steve J.

Hi Steve,
Thanks for posting.
Would you please help to confirm below items and we can narrow down the troubleshooting scope.
1. Check if this Group Policy has been applied when running “gpresult /v” on the client machines.
2. Check if the folder storing the MSI package can be manually accessed from the problematic client machines.
3. You may also create a new shared folder and put the MSI package for test.
4. Check if this issue occurs when applying another MSI package.
If the problem continues, please collect the following information:
Info 1: Please collect the MPSReport from Windows Server 2008 R2. ===============================================
1. Download proper MPS Report tool from the website below.
Microsoft Product Support Reports
http://www.microsoft.com/downloads/details.aspx?FamilyID=CEBF3C7C-7CA5-408F-88B7-F9C79B7306C0&displaylang=en
2. Double-click to run it, if requirement is not met, please follow the wizard to download and install them. After that, click Next, when the "Select the diagnostics you want to run" page appears, select "General",
“Internet and Networking”, “Business Networks”, “Server Components”, click Next.
3. After collecting all log files, choose "Save the results", choose a folder to save <Computername>MPSReports.cab file.
Info 2: Collect userenv.log and appmgmt.log files
================================ =================
Please find a client machine, then enable userenv.log and appmgmt.log on it and then reproduce this issue. For the detailed steps, please refer to this KB article:
http://support.microsoft.com/default.aspx?scid=KB;EN-US;246509
http://support.microsoft.com/default.aspx?scid=KB;EN-US;221833
Hope this helps.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

HP 8500 909g all in one wireless. acting up. software installs fail to complete.

My HP 8500 909g worked well for years.
I replaced my computer with a new Dell XPS with Windows 7Pro 64. Everything worked fine for several months now in the recent weeks i started having problems with the printer doing wacky things.
Sometimes when trying to scan the printer screen shows 'No scan options' refer to owners manual to troubleshoot. I can sometimes do a restart of the computer to make this work.
Sometimes when trying to print in Excel the printer jams all the infromation into an area of about 1" by 2" at the top left corner of the document in portrait, instead of landscape. Again, sometimes a restart of the computer will fix this problem.
I have tried completely unistalling and reinstalling the software several times and the installs fail at the end.
I have tried just installing the drivers (and not the full software suite) for the printer but that doesn't seem to help either, still problems.
It smells like a computer problem causing this. Is there a recommended way that can tell for sure if it's the computer or printer causing this?

@CarlS1, welcome to the forums
I read your post about the issues you are having occasionally, when printing and scanning. I'd like to help where I can!
What I would personally say for the scanning issue is, when scanning from the front panel of the printer, sometimes the connection is lost if the printer goes into sleep mode, or the computer goes into a sleep mode, or even if the router disconnects for a split second. All of those I just mentioned could cause the message you see when trying a scan from the front panel "no scan options". There could be other reasons as well, such as a driver issue, which is what I want to mention next, as the issue you're having with printing seems to be either within Excel, or the printer software itself. As the software will not install properly, leads me to believe the software could be to blame for one or both issues you face.
I would recommend running the Print and Scan Doctor to start with. The tool will scan through the printer hardware, printing software, scanning, etc, and look for issues to correct. Run the scan twice, once for printing and once for scanning. You could always run the tool more if you'd like as well.
The tool very well could fix what the issue is however, if not, it will alert you to where the problem is and that is what I would like to hear back from you. Please add a screen shot of the results, or details would suffice.
Here is an example of the results:
I hope to hear from you, enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Deploy FF 3.6.23 to 7.0.1 failed via GPO

<blockquote>Locking duplicate thread. 
Please continue here: [[/questions/928959]]</blockquote>
Hi, I tried to deploy the upgrade packet for Users from FF 3.6.23 to 7.0.1 via GPO.
(Environment: Windows 2008 R2 Standard Domain, Client PC: Windows XP SP3)
But some PCs can upgrade some PCs can not. (Other software deploy is OK, only FF)
Is there any guys also has the problem like this?
I doubt if any patch not install or reg not config?
Or something else may make this happen?

Why are you updating to such an ancient version as Firefox 7.0.1? The latest supported version of Firefox 13. You shouldn't use versions older than that as they have been dropped from support and have known and public vulnerabilities.
The only other vresoin that has some support if Firefox ESR. [http://www.mozilla.org/en-US/firefox/organizations/ http://www.mozilla.org/en-US/firefox/organizations/].

Nokia 112 Software installation failed

I download the latest software version of nokia 112 when i install it, it restarts and a shows updating and then it shows again software installation failed

I have same problem but I got solution for updating failed in nokia 112,110,113.follow these instruction to succesfull update.. 1.charge your mobile battery full. 2.restore your setting by reset factory setting. 3.switch off your mobile and Remove memory card and SIM2 . 4.then download your update again and install it. Plz reply if it works...

Installation fails via Creative Cloud App manager on windows 8 - can't find log

No information given in Creative Cloud App manager.
I click on "Learn More"
and get a window that tells me the following
Installation failed
Errors encountered during installation.(7)
More Information
"More information" is a link/button but clicking it does nothing.
Where are the logs on windows 8?

You can try checking out the logs, at http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
And this might be handy too: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Good luck,

Software Installation failed ----HP Laserjet M127fw

I got a fatal error during prepare-installation CD software. I disable internet security software. My computer OS is windows 7 64bits. Without installation software, I can not scan. Any suggestions to solve this problem? Thanks.

Hi @HPinksucker ,
I understand that you are getting a fatal error when installing the printer software. I can help you.
Most likely the print driver is already installed and you can print.
You can try to reinstall the scan software separately to see if that will resolve the issue.
Go to start, computer, right click on the CD for the printer installation and left click on open.
Open the setup folder, product folder, and then Scan_App folder.....HPScanLJM.....msi -
right click and select install or you might just be able to just double click on the hpscan.exe to extract the files. (might not be the exact path and name but similiar)
Then Go to start, computer, c:, program files or program files x86, HP, HPljm127mfp series, bin, look for hpscan.exe and right click and send to desktop. This will create a shortcut on the desktop again.
Try and open the shortcut on the desktop for the HP Scan software.
Usually when you get the time out error, you would do these steps in the document, right after connecting the USB cable. A Fatal Error Displays During Software Installation. After this is done the installation should continue.
How is the printer connected? (USB/Wireless)
Please let me know how you make out.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Ipod for Windows 2006-06-28 software installer fails

When I install the iPod utility for Windows, version 2006-06-28 (the current download), the install shield goes to 100% --- but then it reverts and deletes all the files it installs at the very end.
eventvwr tells me the last application event was:
"10:23:55 - Product: iPod for Windows 2006-06-28 -- Installation operation failed."
...and the second most recent event was:
"10:23:41 - Product: iPod for Windows 2006-06-28 -- Installation operation completed successfully."
Anyone know whats up with this?
PS - i had a similar problem with installing iTunes -- see this post for details on that...(reinstalling SP2 fixed the itunes installation error - http://discussions.apple.com/message.jspa?messageID=2675547#2675547 )
ipod first gen touch wheel Windows XP Pro
ipod first gen touch wheel Windows XP Pro

The iPod updater is now integrated with iTunes so that you no longer need the standalone updaters each of which only delivered a particular version of the software. You can safely delete them, you'll find a few of the later ones are still available for download should you feel you need one. If you need to restore your iPod this can be done through iTunes: Restoring iPod to Factory Settings with iTunes 7

Officejet 8600 Pro - software installation fails - "port monitor" issue

I am trying to resolve a completely different issue with my printer, so I thought it made sense to follow instructions from the very beginning. I have been printing successfully on this printer for a year at least. It is the best working printer I've ever had.
Back to the installation: Using Google Chrome as my browser, I downloaded the full package of software for the 8600. It came to about 118 MB. The installation process went smoothly - until the end. That is when I got the message that installation had failed. The error message said the software was unable to make connection with the "port monitor."
I am going to reboot and retry the installation. If it works, I'll come back and say so.
Thanks to all who assist us.
Jack Lavelle - Phoenix

Hello-
Uninstall the printer completely. Once the printer is uninstalled , try the install again. Make sure to turn off any firewalls that you have on your PC before installing.
Also , when you install the printer, you should run the setup as administrator.
Click on start button (if Windows PC) and type %temp% in the search box.
This should open your temp folder. Once your in the folder , look for a file called 7z and a series of numbers.
Open the folder and scroll down to the bottom. Find the Setup.exe file and right click and run as Administrator.
I hope this helps.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

SCCM software installation failed with error for 1603

Dear all
I was trying to deploy Open Office 4.1.0 using SCCM.
As per many threads the issue might be with the MSI. but I could not figure out.
Please help me.
install fails with error code 1603
-sumeet

is this application failure or client installation failure ? with just one error code,difficult to find the exact issue. 1603 is generic error that refers to Fatal error during installation. Are you sure that the command line what you have used is correct
and is working manually ?
Check the logs for additional information that might help to trace the problem.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

IDT (Beats) software installation fails during configuration phase

System: HP Pavilion dv7-6b70ed
OS: Windows 7 Ultimate 64 bits
I lost access to the Beats Audio Control Panel for reasons unknown and decided to reinstall the software. The installation seems to go fine, until I got the configuration screen one gets after restarting the system. The installation terminated with an "unknown error", after clicking the finish button.
It appears to be a problem, because my laptop sounds like having a severe cold. Anybody an idea?
thanks .... H

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load,
Now use the Microsoft 'Fixit' on the link below to install the IDT Audio software.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Software installation failed

Hi all. I see that I have to update my software but every time I go to do this, it always ends up saying "Configuration..." (aka, it stalls and the installation never takes place). I tried doing it manually through the library folder but it says that there is no connection to the internet.
Any suggestions? Should I use the two install discs?
Thanks

Hmm. Sounds like Software Update doesn't like you. If it's an OS update you need, you can download it from Apple's website instead of using Software Update.
If your computer doesn't have 10.5.5 running on it, use this link: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
If you are running 10.5.5, use this link: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056update.html
Did you check out a brody's link? There's quite a few useful tips in there.
Also, have you tried downloading updates one at a time? Does that help any?
~Lyssa

Installation Fails via Update Site for Eclipse 3.2.1

<img src="http://farm1.static.flickr.com/163/395847965_01aaf8f849.jpg?v=0" alt="Install Failure" width="500" height="220" />This is the error I get when I try to install Crystal Reports for Eclipe (1.0.2.v795) using the update site. http://www.businessobjects.com/products/dev_zone/eclipse/Why is it requiring org.eclipse.ui 3.1.0? I think 1.0.0.v555 worked with Eclipse 3.2.Screenshot Image: http://www.flickr.com/photos/ctaggart/395847965/ Cameron 

Hi Cameron, I believe the error message is indicating that our plugin is requiring a version of org.eclipse.ui 3.1.0 or higher. Does your current version of Eclipse have Crystal Reports for Eclipse already installed? If not, then it is likely you will need additional plugins from the Eclipse.org site which are not installed by default. I just tried this on my end and selected the Callisto Discovery Site as well as the Business Objects site. After selecting the latest version of CR4E, I expanded the Callisto Discovery Site and clicked the "Select Required" button. This allowed my download to go through. Can you confirm that you are following these steps? If you like I can upload a doc with a selection of screenshots demonstrating the steps I followed. Let me know and I will post it in a follow-up. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

Install Adobe Flash Player 9 via GPO

Hi All,
I am attepting to roll out Flash player 9 from an AD GPO and
am getting the following errors from rsop.msc
Primary install:-
20 August 2008 10:34:51
Software Installation did not complete policy processing
because a system restart is required for the settings to be
applied. Group Policy will attempt to apply the settings the next
time the computer is restarted.
System restarted (as requested)
20 August 2008 10:39:22
Software Installation failed due to the error listed below.
The installation source for this product is not available.
Verify that the source exists and that you can access it.
Additional Information:
The install of application Adobe Flash Player 9 ActiveX from
policy se-Deploy-Flash 9.0 failed. The error was : The installation
source for this product is not available. Verify that the source
exists and that you can access it.
Failed to apply changes to software installation settings.
Software changes could not be applied. A previous log entry with
details should exist. The error was : The installation source for
this product is not available. Verify that the source exists and
that you can access it.
I am able to install the application from the same location
as the policy both in interactive and quiet modes.
Does anyone know how i may acheive this (preferably without
having to use a separate script to do the install for me!!)
Mikie364

Check Applications/System Preferences/Accounts and confirm that you are still listed as Administrator. One of Leopard's install "bugs" causes Admin. account to become a Standard account. If that has happened read this:
http://docs.info.apple.com/article.html?artnum=306876
If that is not the problem and you are still the big kahuna, then just try /Utilities/Repair Permissions
......... RESTART.
DIXIE

Software Installation fails via GPO

Similar Messages

Maybe you are looking for