Software Installation for Sound Blaster X-Fi Notebook

5Software Installation for Sound Blaster X-Fi Notebook[ Hello, I have searched through the sound blaster forum for an answer to my question, but have been unable to find it.
I recently recieved a sound blaster x-fi notebook. When I inserted the unit into my computer, the drivers installed just fine and I am able to use it, however, when I try to install the software bundled with the product on disk, something goes wrong. To be honest, I have no idea what it is. The problem seems to be with the install wizard itself on the disk provided me, because the install progress gets to about 20% and freezes while installing the Creative Console Launcher. I'm not sure if I just need a new CD, or if it is a problem with the software itself and nothing can be done.
If anybody can provide some insight as to what the problem is or how I can fix it, I would be very appreciati've.

Hi,
Glad that it work for you. I think someone is asking for feedback in that driver download thread. Maybe you can post your feedback there on how is it for your x-Fi Notebook with the new driver set. I believe there are others who would be like you and would certainly love to hear any good news. Everyone has always been posting on what's bad and what's not working, but i think we should also post to tell what's good and what's working.

Similar Messages

  • Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

    Hello!
    I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
    I do the following:
    1. Install Windows 7 x64, SP1.
    2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
    3. Install all Windows Updates from Microsoft
    4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
    Here is the log file for the first try (win7update.log):
    Update started 12\28\2011 at 21:11
    Installed TVALZ_O.INF
    Installed IO & Memory Access Driver
    driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
    util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
    Update completed at 21:29
    After reboot I run it again and the result is:
    Update started 12\28\2011 at 21:38
    Toshiba Bluetooth stack has already been installed.
    Toshiba Value Added Package has already been installed.
    Update completed at 21:40
    Any help is appreciated!
    Thanks in advance!

    You are right this notebook model was delivered without OS.
    Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
    What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
    Win7 SP1
    Intel Chipset SW Installation Utility 9.2.0.1015
    TOSHIBA Supervisor Password Utility 4.8.6.0
    TOSHIBA HW Setup Utility 4.8.6.0
    TOSHIBA Bulletin Board V2.1.10
    TOSHIBA ReelTime 1.7.17.0
    Intel Management Engine Interface 7.0.2.1164
    NVIDIA Display Driver 8.17.12.6669
    Intel Rapid Storage Technology Driver 10.1.2.1004
    TOSHIBA Value Added Package 1.5.4.64
    USB3.0 Driver 2.0.32.0
    NVIDIA HD Audio Driver 1.1.13.1
    Conexant Audio Driver 8.51.1.0a
    Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
    or
    Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
    or
    Realtek Wireless LAN Driver 2.00.0013
    TOSHIBA Wireless LAN Indicator 1.0.3
    Synaptics Touch Pad Driver 15.2.11.1
    TOSHIBA Software Modem 2.2.97(SM2297ALS05)
    Conexant Modem Driver 7.80.4.53
    TOSHIBA HDD Protection 2.2.1.12
    Atheros Bluetooth Filter Driver Package v1.0.7
    Bluetooth Stack for Windows by Toshiba v8.00.04(T)
    Atheros LAN Driver 1.0.0.46
    Realtek Card Reader 1.0.0.12
    TOSHIBA Sleep Utility 1.4.2.7
    TOSHIBA Face Recognition V3.1.8
    TOSHIBA eco Utility 1.2.25.64
    Intel Proset 14.0.2.0.1.s64_wCAT
    Intel Wireless Display 2.0.29T
    TOSHIBA HDD_SSD Alert 3.1.64.7
    TOSHIBA Service Station V2.1.52
    TOSHIBA PC Health Monitor 1.7.4.64
    ConfigFree 8.0.37
    TOSHIBA Web Camera Application V2.0.0.19
    TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
    TOSHIBA Media Controller 1.0.86.2
    TOSHIBA Media Controller Plug-in 1.0.6.1
    PatchFiles$$2 PCIIDEREG-1.2
    PatchFiles$$3 TosVolRegulator_x64_1.1
    It is very important to use right installation order.
    Please post some feedback.

  • Finding the ASIO driver for Sound Blaster ZS

    Finding the ASIO driver for Sound Blaster ZS
    And One More question
    Anybody are using the Guitar Rig (Guitar effect software)
    How to detect the Sound Blaster ZS sound card with WDM Driver

    shlomokg wrote:
    Hello,
    I am trying to use my Sound Blaster LX with the new Adobe Audition 2.0 with no luck.
    With the new version 2.0, Audition came with this ASIO solution that should make things easier.
    Somehow for me it does not work.
    Please advise, what should I do that Audition will work with my sound card?
    Thanks,
    Shlomo
    Perhaps Asio4All or USB-ASIO (LX not said to be supported) driver is needed to be installed to get a sort of ASIO support for that USB device.
    jutapaMessage Edited by jutapa on 07-2-2006 07: PM

  • Driver for sound blaster pc

    I search drivers for sound blaster pc28. Thanks

    If you don't mind I would like some more information about this like:
    Your operating system and the model of your dell, along with how the prompt was presented--i.e. the driver installation program presented the error.
    Thanks
    Johnathan
    Computer & Network Technician

  • Sound Blaster X-Fi Notebook Express Card and Wireless Recei

    I?purchased a Creative Wireless Recei'ver and a Sound Blaster X-Fi Notebook Express Card. At the risk of removing any doubt that I am an idiot, what is the purpose of the square piece of stretchy black material? It was nicely packaged, but I don't know what I'm to do with it. It's about 4 inches square and stretchy, like spandex. I sent an email to Customer Service. They have no clue and advised me to call Direct Sales. They don't know what the purpose of the cloth is either. Any ideas?

    Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
    I hope this at least helps some of you out.

  • Manual for Sound Blaster Live! CT4670 needed

    I'm looking for the manual of the Sound Blaster Li've! CT4670 card in English or German. Somebody has got this manual in PDF format or knows a source where I can download it's

    0Re: Manual for Sound Blaster Li've! CT4670 needed" CT4670 = SB Li've Value according to here,
    ?http://support.creative.com/kb/ShowA...=ws:,case=0846
    so using that here is a link to the manual,
    http://support.creative.com/manuals/download.aspx?nDownloadId=2386&prodName=Sound%20Bl aster%20SBLi've!%20Value%20User%20Manual

  • Windows Vista Driver for Sound Blaster 5.1 P

    I want driver for Windows Vista 32 Bit edition for Sound Blaster 5. PCI sound card. I have loaded the Windows XP driver but as a result of that it is playing audio in 2 speaker stereo mode, but i have creative 5. speaker system. As a result of that sound is coming almost only from the front two speakers. Creative MIXER is also not working. Please suggest a solution.

    Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

  • Announcement: New beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma - 21st Jan 2011

    Hi all,
    There are new beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma. For those who are experiencing low volume with the microphone, download the corresponding beta to see if it hel
    ps.
    For Windows:
    Beta firmware for Sound Blaster Tactic3D Alpha
    Beta firmware for Sound Blaster Tactic3D Sigma
    For Macintosh:
    Beta firmware for Sound Blaster Tactic3D Alpha
    Beta firmware for Sound Blaster Tactic3D Sigma

    Hi,
    I confirm that the two files SBTA_PCFW_BETA_US_D0_0_2.exe and SBTS_PCFW_BETA_US_D0_0_2.exe are corrupted (not Win32 applications). The downloads do not complete and stop respecti'vely at .36 KB and 05 KB.
    Creative, you have to reupload the files on your webserver.
    Download done with XP and IE8.
    Bye.

  • Hardware IDs for Sound Blaster World of Warcraft Headsets

    Hi all, If for some reasons your WoW headset is not functioning as intended and you have gone through most or all of the troubleshooting steps, please do a check on the hardware ids of the headset. If the hardware ids for your headset is different, please get in touch with our Customer Support to arrange for an RMA. Hardware IDs for:Sound Blaster World of Warcraft HeadsetHardware IDs for:Sound Blaster World of Warcraft Wireless Headset

    Hi Krusekontrol,
    Please PM me your email address. We'll try to get someone from support to assist you with the RMA.

  • Driver for sound blaster 1024 win

    Hello id like to know where can i download the driver for sound blaster li've 024 for WinXp?thanks a lot?

    Duplicate post.
    Jason

  • Rear Channel Sound Volume Controller for sound blaster Aud

    Hi?Every body Wish you a wonderful new year 2008,?I am using creative sound blaster Audigy? sound card and the speaker system is creative inspire 5. I have the volume controller for front and center and subwooferbut i don`t have the controller for rear channel and the same time the rear channel is working with the low volume?not able to hear the sound from the rear channel but its working fine if i go near to the speaker i can hear the sound very lowi need to increase the sound for the rear channel?If any body know how to control the rear channel for sound blaster audigy could you let me know .... System Specifications:Operating System :Win -XP Sp2Memory : GBVideo Card :Ausus ATI Radian card?

    op
    ps.
    i want to add. some additional information, my 5. speaker doesn't have digital output, the line out for the sub woofer and centre are red and white line just like the same as the other speaker line, i don't know weather it will cause the front doesn't work or not, but i had read some post it said "In the <B>Creative Mixer</B>, be sure to <B>disable</B> the option for <B>Digital Output Only</B>, and set the number of speakers accordingly. For example, if you have a 5. channel speaker system, select 5.."
    if, i didn't change the creative mixer to "disable the option for digital output", will it cause the centre and sub woofer have no sound at all? plesae reply A.S.A.P. as i don't know weather it is the problem of the sound card or just a problem of the setting.....thanks alot.

  • CMSS for Sound Blaster Z

    Hi All,
    Is there a way to enable a CMSS or to sterio upmix method for Sound Blaster Z soundcard,
    I found it rather disappointing since I'm using 5.1 setup (logitech Z-5500) I though it was an upgrade from X-FI Fatality series and found out there was no CMSS feature that comes with SBZ.
    Do we have a way to enable it manually, like a tweak or something?
    Thank you

    CMSS was superseded by THX TruStudio Surround, which itself was either superseded or renamed into SBX Pro Studio Surround. You'll find it on the SBX Pro Studio tab of the control panel, as the first checkbox.
    I personally prefer how the SBX version sounds compared to CMSS (which is just as well, since that's the only way I can really use headphones these days due to hearing loss). The only real limitation it has compared to CMSS is that you cannot specify it to simply do a dual-stereo or the like - it will always add a faux 3D effect to it.

  • Update for Sound Blaster

    Okay, so I have the most recent update(SBAX-PCDRV_LB_2_8_00) for Sound Blaster Audigy, when I try to install I keep getting an error message "set up is unable to detect a supported product on your system" so what gives here, is creative just playing games or what ?
    :angry:

    I have similar problems, not only on the front panel either. Basically many power spikes will rattle the card and cause all sorts of problems including the one you mentioned. Advice- power down before connecting or disconnecting anything.

  • Speaker setting software for sound blaster live 24

    helo,??i need the speaker setting software for soundblaster li've, i downloaded the latest driver and basic audio suite but it does not have graphic equilizer and many other stuff where is itt?

    Originally Posted by engineering
    Hi 115AAT,
    I notice that there is a link "application" that can be clicked. There are applications listed on the site. There may be applications that you are looking for.
    I have tried to use these applications, but once the setup starts it always says "Setup could not detect any Sound Blaster Audio Card on your system. Please ensure that your Sound Blaster hardware is properly installed before running this Setup program." Then it exits and the application never works.
    My sound card is working properly, and all of the drivers are installed, I just cannot seem to access the features that the CD allows you to, like the equalizer or bass boost.

  • Can't install drivers for sound blaster live Telling me there isn't a sound blaster card install

    I am doing a fresh install of xp on a machine. This machine had no hardware issues before I formated the dri've and re-installed windows xp.
    Everytime I go to install the drivers for the sound card I get an error message telling me that setup cannot find a sound blaster card installed on the system?
    I even pulled a known working li've card from the machine I have downstairs. Put the card in and started up the machine. The driver pack is still telling me there is no card installed. I've tried three different pci slots as well.
    I even went as far as re-installing windows xp without service pack 2 integrated and even that didn't help!!!
    Is there some kind of fix that I am missing?

    the unipack download from creative will not work. first, try asking around if somebody else has the same 5. creative card as yours. the only solution for your problem is to use the installation cd that came with your creative card. I lost mine so i went to a pc repair shop and inquired if they have a copy of such cd - they normally do.
    . you need to remove all the programs concerning creative from add remove programs. 2. shut down, and remove the sound card. 3. turn the pc on and let windows boot normally. install the the softwares and drivers using the cd that came with the box. 4. shut down and install the sound card 5. turn on the pc. windows will find a new hardware and will find the right drivers bec you have previously installed them. There is absolutely no need to reformat your hard dri've.

Maybe you are looking for