Software Installation issues via GPO

Hi there,
I have created a new GPO (computer configuration) that deploys Sketchup Pro 2014 to computerson the network.
My tester computer refuses to install it.
Here are the System Events i receive:
Event 101:
The assignment of application SketchUp 2014 from policy Application Delivery - Sketchup 2014 failed. The error was : %%1274
Event 103:
The removal of the assignment of application SketchUp 2014 from policy Application Delivery - Sketchup 2014 failed. The error was : %%2
Event 108:
Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was
: %%1274
Event 1112:
The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before
the next startup or logon for this user, and this may result in slow startup and boot performance.
I restarted the machine a few times with no result.
I also have: [Computer Configuration\Policies\Administrative Templates\System\Logon\Always wait for the network at computer startup and logon = enabled]
All of my computers are equipped with SSD drives, not sure if that would matter, i had a heck of a time with GPOs and SSDs before.
Any help?
Thanks,

I think I just found a solution.
As per this
thread:
Computer Configuration > Policies > Administrative Templates > System > Group Policy > Policy > Startup policy processing. Change from default to Enabled and 30 sec.
Does the trick.

Similar Messages

Software Installation fails via GPO

GP SERVER:
Windows Server 2008 R2 Standard 64 Bit
CLIENT PC's:
Windows 7 Professional 64 Bit
DEPLOYMENT INFORMATION:
General:Deployment
type - Assigned
Deployment source - \\SERVER\FOLDER\MSI.mis
Uninstall this application when it falls out of the scope of management - Disabled
Advanced Deployment Options:
Ignore language when deploying this package - Disabled
Make this 32-bit x86 application available to Win64 machines - Enabled
Include OLE class and product information - Enabled
Permissions:
Allow
XXXXXXXX\Domain Admins
Full control
No
Allow
NT AUTHORITY\Authenticated Users
Read
No
Allow
NT AUTHORITY\SYSTEM
Full control
No
Allow
XXXXXXXX\Domain Admins
Read, Write
Yes
Allow
XXXXXXXX\Enterprise Admins
Read, Write
Yes
Allow
NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS
Read
Yes
Allow
NT AUTHORITY\Authenticated Users
Read
Yes
Allow
NT AUTHORITY\SYSTEM
Read, Write
Yes
Allow
CREATOR OWNER
Read, Write
Yes
Administrative Templates:
Startup policy processing time – Enabled 30 seconds
Always wait for the network at computer startup and logon - Enabled
Error(s) on test client OC:
Sourced from Windows Logs > System
Error 1 - "The install of application XXXXXX from policy XXXXXX install failed. The error was: %%1612"
Error 2
- "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was:
%%1612"
Based on the information above, is anyone able to advise if there is anything I have overlooked?
Jeet S

Good Morning,
So despite numerous variations and permission settings we are still experiencing problems with this. So this is what has been done so far –
The msi file has been moved to another location on the network which we know works for other msi files –
This did not work although when we check event viewer, gpresult and RSOP the policy is being applied but the software installation is failing.
Added domain users to local admins. The share folder containing the source msi has
Everyone setup for read and execute permission –
This made no difference
Tried running the msi file logged in as administrator and also tried running the msi whilst logged in as myself –
The msi runs fine for administrator but will not run when logged in as myself and gives the following error:
Software installation failed due to the error listed below. The installation source for the product is not available. Verify that the source exists and that
you can access it.
The msi contains an upgrade to our antivirus software. I setup two machines one with the old antivirus software installed on it and the other without any antivirus software on it. Logged in as domains users on each machine and did a gpupdate /force /boot
After logging back in I ran RSOP and found that on the machine which had no antivirus on it to begin with there was an error for software installation stating –
Fatal error during software installation. For the machine that had antivirus already installed on it there was no such error and the software installation states that the installation was successful and yet the new A/V software is still not installed.
This morning I got in early to try and do some more work on this but my boss was already here and advised that even a login script will not work so he has installed it manually on one of the machines and it appears to have worked fine. Not really sure where
to go from here.
Jeet S

HP LaserJet CM1415fmw software installation issue

Hello.
I am having a problem with an HP LaserJet Pro CM1415fmw software installation. During the installation when the connect to printer stage is reached it takes a very long time to complete and fails with an error.
Kindly advise if you can help.
Regards

Hello Bsch,
I invite you to:
1- Unistall/remove all the network printers installed by your PC
2- Unistall/remove all the drivers installed by your PC specially the HP Universal driver
3- Delete/remove all HP software files from your PC (C: / register..)
4- Disable the Antivirus(es) and the Firewall then download again the HP Full Solution Software corresponding to your OS
5- Disable the HP Smart install from the printer's menu (or from its Web page if you can connect it to network)
6- Disable the HP Web services (by default this feature is disabled, then just go through the panel menu and confirm that, here you use the printer by USb so no need for this feature)
7- Run/launch the installation by executing the setup file and be sure to maintain the printer unplugged to your PC, no USB connection at this step.
8- Run the OS/PC device manager to check/update the USB port/driver connection-add during the printer's USB plugging (you plug the USB cable to the printer when the installation guide asks you (3rd step))
9- Continue the installation and let's see if it can finish correctly and succeed without delay or error.
10- Check a Print test page, Fax feature and the Scan module.
Note: This can lead to a Full software installation, but if you just need a printing driver only you can try the same steps, although you will download and install an UPD Driver through a traditional mode (LPT1 port)
Try to use this method for the first time when the network printers are still installed and try to see if it goes fine otherwise you step for the steps given (1-10)
Please tell me what kind of OS you are running on your PC.
Please tell me if this procedure is helping, then if not I can provide you with a new solution.
Please upgrade the printer's firmware through USB connection if possible (or Ethernet like step5)
Best regards
Soudani

Software Installation Issues

I recently had a new boot hard drive installed in my G5. OS X 10.5.8 was reinstalled on the new drive and all my software and settings was transferred to the new HD using Migration Assistant. After that I found that many of my programmes didn't work properly (particularly Abobe CS3 programmes like Photoshop etc) so I needed to do fresh installs for those affected.
Recently, I've noticed that when I try and install a new programme (by dragging its Icon to the Applications folder after downloading a DMG), a message is displayed saying "the item (name of programme) can't be moved because "Applications" can't be modified." The message has a button called "Authenticate." Clicking on this allows the installation to proceed. Then once the installation has been completed, another message is displayed asking me to input my administrator password.
I also get issues when installing software, ie sometimes I need to do it several times before the software works properly (this occurred recently with Toast 10).
When installing software, I used to be only asked to input my admin password before a programme was installed and I was never asked to authenticate anything.
I have tried repairing permissions.

Apologies, I posted the previous answer to your question by accident before I had finished typing: there doesn't appear to be a facility to edit posts once posted. My answer should have read:
Permissions on my applications take the form:
Most apps System: R&W; Admin: R&W: Everyone: R only
Adobe CS3 Pad (Me): R&W; Admin: R&W: Everyone: R only
One or two apps Pad (Me): R&W; Unknown: R only, Everyone: R only
The Applications folder and the System Folder have the following Permissions:
Applications System: R&W: Wheel: R only: Everyone: R only
System System: R&W: Wheel: R only: Everyone: R only
The Library and Users Folders have the following Permissions:
Library System: R&W: Admin: R&W: Everyone: R only
Users System: R&W; Admin: R only: Everyone: R only
Wheel is shown with a two person icon in the Info Window for the Applications folder, the same as Admin. I don't have a user called Wheel on my System. I am the only user. However, the person who installed the new boot hard drive and reinstalled OS X did create a new admin user when he did this. I added myself as Administrator afterwards and then deleted the user created by the engineer (I was told to do this).
As the Permissions on the actual applications seem to be as they should be, is there a reason why I shouldn't delete the User: Wheel from the Applications folder permissions and add either Admin or myself to the permissions list and set this for Read & Write? If this is OK should I also do this for the System folder?
Thanks for your answers so far.

BlackBerry Desktop Software Installation issue

Hi All,
I have tried to Upgrade BlackBerry Desktop Manager from 3.6 to 4.7 version, and it is successfully upgrade to BlackBerry version 4.7. But the issue is, it shows both version in Control Panel - Add/Remove Programs.
Note: After installation rebooted the PC
Example:
Control Panel --> Add/Remove Programs --> Currently installed Programs
BlackBerry Desktop Manager 3.6
BlackBerry Desktop Software 4.7
Kindly some please advice. Thanks... Shiva

the shortcut startup is the thing that adds (or not) the shortcut in the Startup menu, but the Desktop Manager starting at Windows start is stored in the registry.
I didn't bother to do all that, there is a clear option when you install the desktop manager that asks for automatic startup & automatic upgrade. I don't remember at which point (it's a shame, because I installed it less than 3 weeks ago and have already forgotten ! not eating enough fish), but it's there.
besides, I believe you can untick the option later, maybe in the Device Manager that is next to the windows clock.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

HP ePrint Software Installation Issue

I purchased my new HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g. It is on my network with all HP software and drivers that are up-to-date. I am running Windows 8 on my ASUS Ultrabook Laptop. I am also running McAfee AntiVirsus Plus Software in the background. When trying to install HP ePrint Software, I am receiving a "Fatal Error" during installation/required to Uninstall. There are no error codes being displayed. No references to the antivirsus software. I have turned it off and tried reinstalling but got the same message. Is there a work around to fix this issue so I can take advantage of HP ePrint?

Hi,
Please connect your printer (USB or wireless) then run the following tool :
http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Oracle software installation issue

Hi All,
as part of my learning exercise I am trying to achieve this -
I have a Sun box (SPARC 64 bit) running on Solaris 10 where oracle software is already installed (as oracle user) and a test database is created.
What I want is to install oracle 10.2.01 and then upgrade to 10.2.05 in a isolated environment on same serve as different user.
For this I have created another user, given access to the location where oracle software is kept.
Login as newly created user. I declare & export ORACLE_HOME and then execute runInstaller I get permission error on orainventory directory!!
One way of resolving this issue I thought would be to put newly created user to same group as oracle (as oraInventory has 770 permission) but my sysadmin says try to create a completely isolated environment and do not touch existing oraInventory dir.
I am kind of stuck at the moment and was wondering if someone can help me or guide me to right direction/document
Your help is much appreciated.

All,
Thanks for all your help and suggestions. After a lot of reading documents, I came to realise that to create isolated environment, I need to specify different oraInst.loc parameter to runInstaller. So I created a oraInst.loc in $ORACLE_HOME and changed contents of this file to point to oraInventory directory which again I created in $ORACLE_HOME. Then ran runInstaller-
./runInstaller -invPtrLoc /rabi/oracle/product/10.2.0.1/db_1/oraInst.loc
oraInst.loc has -
inventory_loc=/rabi/oracle/product/10.2.0.1/db_1/oraInventory
inst_group=rabi
Installer starts off well. All checks are done. Gives warning that SWAP memory is less than recommended. I check the checkbox to ignore this warning.
Installation process starts and then hangs @83%
Last few lines of log file are -
location = /u01/app/oracle/product/11.2.0/grid
name = oracle.rdbms
INFO:
Query Exception: HomeNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
INFO:
INFO: Setting variable 'b_ASMAlreadyUpgraded' to 'false'. Received the value from the variable calculation.
INFO: Calling Query ASMQueries10.2.0.1.0 IsRACASM
orahome_path = /u01/app/oracle/product/11.2.0/grid
orahome_sid = +ASM
And I am kind of stuck at this point.
Has anyone come across this issue?
Thanks in advance.

Crystal Reports Software Installation Issue

When I try to install Crystal reports on my Dell Optiplex 780 running Win XP SP3, 3.5 GB ram, with Adobe 9 installed and License accepted I get Error 1713 unable to intall one of it's required products. What do I need to do to complete the installation?
Ron

Error 713 is a generic Microsoft install error. E.g.; google the error, see if any of the suggestions apply. Also, use the search string 'Error 1713 crystal' in the search box at the top right corner of this web page. See if any of the results there help. E.g.;
Crystal Reports XI -- Error 1713. Crystal Reports XI cannot install one of
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Software Installation Issue

I have 5 disks in the package to install Adobe Photoshop Elements 10 and Adobe Premier Elements 10.
I have a machine using Windows 7 and the instructions require installation to begin with disk 2. I'm not prompted after a system reboot to do anything. Disk 3 doesn't prompt me for installation.
What am I missing here?

Thank you Barbara.
But tell me this. I did install Adobe Premiere Elements 10 because I do intend to use it and it was included on disk 2.
Is the idea now to install disks 4 and 5 which are labeled as content?
Warren

Nokia C2-01 Software Update Issue via Ovi Suite & ...

I purchased NOKIA C2-01 my phone firmware update ver is 10.5 but a month ago nokia release firmware update version 11.0..
But I try to updated from latest ovi verson 3.1.084 but they said no software updated is availble.
I tried from my mobile they also said no updated is available...
My region is MIDDLE EAST (PAKISTAN)...
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.
Solved!
Go to Solution.
Attachments:
Capture.PNG ‏119 KB

Please help me please am to check my Nokia country service but when am checking i will got this feedback "This service is not available in your country or region visit www.nokia.com for service available in your country or region.am from Ghana and my phone model is Nokia C2-01,
Moderator's Note: Your phone number and the IMEI number were removed. Please don't publish your personal contact information on a public forum.

3rd party software installation issue after Recovery procedure

I had software installed in my laptop which was working ok but i had to run recovery disc on my laptop,
I saved most of my stuff on a memory stick but when i try to instal a particular software i get message "This application is registered to John(me)" but when i click ok i get the message "The current key has been locked to a different machine.
Please contact [email protected] for a new key .
Can anyone offer any advice on how to rectify this problem?
regards John

Hello
I think you should give us some more informations about the software that you use, notebook model, OS,
Such an error message is not known to me and I dont know a program on the recovery disk where you could get such a message.
Greets

Unable to automatically install Flash 12 over Flash 11 via GPO Software Installation

We have a GPO software installation to install Flash 12 to a group of Windows 7 64-bit workstations. It works fine on a system that has no previous version of Flash already installed, but when the workstation has Flash 11 installed, the installation fails with an error in the Windows application event viewer saying something referring to installation failed because the previous version of Flash could not be removed.
If we log into the computer and manually uninstall Flash, then the Flash 12 GPO assigned to the computers works at the next reboot. If we manually install Flash 12, by running the Flash installation file as the user, then 12 installs over 11.
I have seen this kind of issue when someone tries to install and older version of flash over a newer version, but I don't think we should be having these problems installing the latest version of Flash.
We have to go to each PC and manually remove Flash 11 before we can install Flash 12 and it is too much time and labor to keep doing this.
What can be done to fix this so that a GPO software installation of the Flash 12 MSI will forcefully replace older versions of Flash without being stopped by this error?

Hi lord_knikon,
I understand your frustration. We've had several users report this, however, we've not been able to reproduce. This happens with the online installer downloaded from get.adobe.com/flashplayer. We've not seen this with the offline installers, posted at the bottom of this help page, http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html. Please try using the offline installer and you should be able to get Flash Player installed on your system.
Maria

LaserJet Pro MFP M276nw software installer not detecting printer via USB or wi-fi - Windows 7

I am trying to install a LaserJet Pro MFP M276nw on Windows 7 Home Premium x64, and I know the printer functions fine, as I have installed it on both Windows Vista Basic x32 and Windows 7 Professional x64 all on the same desktop. The operating system has been changed a couple of times, hence the multiple installs.
I downloaded the full featured software from HP.com and went through the routine of installation as per usual, except that now the software doesn't detect the printer when it requests that I connect it via USB. Trying to install via wi-fi doesn't work because the printer still needs to be attached via USB in order to create the proper wireless handshake. Windows 7 detects the printer, and in-fact installed the drivers for it automatically. However, the printer installation software suite does not respond to the printer being connected, and just hangs there, waiting for it to appear.
I have tried multiple USB ports and it's the same issue. I've installed the basic driver also available for download on HP.com, but that software does not appear to include an option for scanning files to the computer. The printer itself will scan to email or to to a USB thumb drive, and even to a network folder, but not directly onto the computer. If it wasn't a necessary function of an all-in-one printer, I wouldn't bother with the scanning feature and simply make do with the basic printer driver.
Anyone have some sort of idea regarding this issue?

Hi @KP_ ,
I see that you are having issues with setting up the printer on the one computer. I would like to help you out today.
I would uninstall the software, turn off the Startup programs, Antivirus software and update the driver during the install by the post I have provided.
Disconnect the USB cable.
Uninstall the software.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Download, save and then run the latest drivers. Don't Connect the USB cable until prompted during the install.
HP LaserJet Full Feature Software and Driver.
Right after connecting the USB cable, follow this document immediately. A Fatal Error Displays During Software Installation. Disregard the title. If the printer stays listed properly, don't worry about updating the driver.
Test the printer.
Then you will have to go back and enable the Startup programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Configuring WMI Filters or GPO for Software Installation restirctions

Good day all,
I am trying to configure a first time WMI filter to prevent my users from installing new software. I don't want to restrict anything they currently have as it is working fine. They have very minimal programs installed as is (MS Office, IE, Java, etc..).
I would like to keep what they have and prevent new installations using either GPO or WMI filters.
I have checked a few posts prior to writing here, but I am not familiar with alot of the code or jargon that is used. I am as I said, trying this for the first time. I have been checking the below link and got as far as step 7. This is where I get lost.
http://technet.microsoft.com/en-us/library/jj899801.aspx
http://technet.microsoft.com/en-us/library/cc947846%28WS.10%29.aspx
I just need something very basic that says "You can't install this, call IT" with any new install attempts.
PS. You guys have been a great help in the last few weeks for me.
Dario Garcia

Hi Dario,
Based on your description, I understand that you want to prevent domain users from installing software via
group policy. If anything I misunderstand, please don’t hesitate to let me know.
As you know, you can use
Software Restriction Policies. May also be able to use
AppLocker. For more details, please refer to following thread.
Block
software installations -GPO
In addition, from your this thread, I noticed that you focus on
WMI filter. Did you mean that you want to know how use WMI Query to filter correct Windows version or any other? Sorry for my confusion.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

GPO Software Installations always require configuring on first run.

Whenever I push out an MSI through a GPO, the first time a user runs the software after logging in requires Windows 7 to configure the product before it will load up. With the exception of VMWare 10, this only happens once per usage of the software
per login and is avoided if the shortcuts created with the install aren't used. If I navigate to the software installation folder and manually run an executable, there is no please wait while windows configures .... For some lesser applications,
removing the shortcuts from the msi and creating manual shortcuts through GPO, I was able to work around the problem, but it's becoming too much of a hassle to keep doing.
So, my question is, how do I stop Windows from configuring applications on first run that are installed through GPO?
Thanks

Kevin,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Software Installation issues via GPO

Similar Messages

Maybe you are looking for