Software Installation Problems with Media Source and Nomad Explo

Hello Creative Users,
recently I had to reinstall my operating system on the PC. I have an IBM Thinkpad R30 with a Sitecom USB2.0 pccard. I am running WinXP Pro SP2 with all latest updates.
I have a Nomad Jukebox Zen Xtra with Firmware .20.08 and an update harddri've of 80GB.
As long as I was running the software on my previous installation everything worked fine.
I installed the driver .26.02. This recognized the Jukebox. Musicmatch is able to communicate to the Jukebox and recognizes all files on it.
When I installed Nomad Explorer I got an error ctregserv failed because ctin...dll is not found.
When I tried to install Media Source from the original disk it showed an error after 30% Media Source not found. Install Media Source before continuing.
This is what I received now with all verisons of Media Source and Noamd Explorer incl. .30.0.
Can someone help me as synchronizing with Musicmatch is a pain.
Thanks
Rolf

Hi everyone,
as I saw many questions regarding installation problems with Mediasource or Nomad Explorer
in this forum I will answer my own question right here. I was pointed to the answer by a friend with a similar problem on some other software.
When trying to install the Creative software under WinXP SP2 I happens that the registration does not work. the reason are missing write attributes to the keys for
Creative software. To correct that go to: Start, Run and enter regedit. Hit ok and you are in the registration editor.
Find the Creative location unde HKEYS_SOFTWARE. Click right mouse button and choose
properties.
Check full access for your user as well the system user. click on advanced and mark both all the users you want to install from. Check the lower box below the user window sayin something about roghts being propagetd to lower folders etc. Cklick conform and ok, click confirm on previous screen and close regedit.
Now you should be ok and able to install.
Regards
Rolf

Similar Messages

Problem with media player and the uploaded music

since i downloaded the new version of the nokia pc suite every time i upload a song to the memory and try to update the library in the media player, the phone just shows the updating bar but it doesnt do nothing,it just says updating and thats it i have to cancel the operation and close the media player, and the only i dont remember that well but i think the nokia music manager is uploading the songs to another folder, right now the default folder is e: sounds/digital can that be the problem ?
and another thing, if i go to the built in archive manager in the phone i can see the songs i upload but in the media player i dont see them. Any idea?
Message Edited by alex18 on 18-Apr-2008 08:39 PM

25-Apr-2008 03:56 AM
alex18 wrote:
well i found another thing on my phone , everytime i turn off the cellphone and then turn it on the media player is allways open on the background.
this is a normal feature of n73 ME...sad isn't it? that's one thing i didn't want with my old phone...
What you can do is to go to music player then click options and then exit...
hope this helps.
CeS
"The best index to a person's character is how he treats people who can't do him any good, and how he treats people who can't fight back"

Various Installation Problems with Portege R100 and Windows XP

Hello,
i recently purchased a used Portege R100. It came without OS and i wanted to install XP SP2.
I know that restores only work with suited PCMCIA drives, but the HDD is formatted, so there is no recovery possible i guess.
Here are my problems:
- with my very old Freecom PCMCIA CD-Drive the Windows Setup CD is recognized and it starts loading XP drivers until it wants to start Copying the installiation files --> then I get the Windows Bluescreen with the 00x7 error (virus or driver)
- the same happens with my old W2k Pro installation disk.
- With the even older W98SE strange things occur too: The installation seems to work properly, but when it comes to boot with W98SE for the first time the systems hangs up with pixelgarbage.
- Making the 6 Bootdisks with makeboot did not work either.
- I also tried MS-DOS! And guess what! That worked! Loading the Freecom drivers and copying the Windows I386 folder to my hdd with volkov commander (something similar to NortonCommander) worked too! So i had hav the files on my disk but after running winnt in the i386 folder, the system hangs after a while, when it starts to copy files to a temporary folder.
So i nearly tried everything i know. right now i am downloading knoppix to try that.
I have run Memtest86 and the Diskmanager 9 to test RAM and HDD, both finished withut errors, so the main parts involed in the setup process seem to work. May it be that my IDE controller is broken?
I have no idea, WHY windows won't install!
Help is warmly welcome!!
Thanks,
Christian
Does

Hello
i fixed the problem:
The method of installing the i386 files to the DOS Disk and running winnt works. I was to impatient. Windows setup starts copying the files to a temporary folder. Nromally you see the info bottom right, waht files are copied at the moment. This is a good indicator that the system is still working.
My setup does not show waht files are copied to the temporary folder. But it still works. HDD is spinning all the time. Due to the "non-Sound" of the R100 i was sure it hung up. But it simly did not. After lets say 20 minutes, the setup process went on as usual....
Now i have XP in the R100 and all teh drivers installed. What a wonderfull notebook, really!
Thanks for the hints anyway...

Installation Problems with Oracle 8i and Win98

Yesterday I tried installing Oracle 8i Personal Edition from CD. I completed installation up to "Database Creation in Progress", initializing phase. It stuck at 85%. The CD did not make any noise, and it stayed at 85% for 53 minutes.
Today, I downloaded Oracle 8i. It unzipped with no problem. I uninstalled, then tried to install. I got numerous .dll file errors in writing to file c.
The CPU is 500mz, 128 S-DRAM PC-133 Memory, there is 32 gig free on hard drive, Browser is IE Ver.5.5, O/S is Win 98.
Thank you
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename - psoracle81798
- Date/Time 02/08/02 10:05 am EST
- Browser + Version - I.E. Ver 5.5
- O/S + Version WIN98
- Error Msg: Error in writing to file C

Change Compiler to egcs 1.1.2-24.
Try again.

Problem with media encoder and re-opening projects

Dear all, I'm a newby and I'm having a very strange problem.
I've made my first premiere project and all seems ok in the preview. Then I've tried to exported it in avi using media encoder. This is a 1024x682 color movie, 25fps, duration about a minute. Avi export setting was xvid compression, and after a long wait (10 min) and nothing started, I've re-tried with divx. After some more time, media encoder blocked and I needed to put it down with windows task manager. Then I closed normally premiere.
After re-opening premiere I've selected the saved project, but it do not open and a message appear (in my language, so I'm trying to translate): "Impossible to open a sequence of the project. It was not possible to associate any sequence preview file or codec to this kind of sequence."
Moreover I've tried do create some other simple projects but none of them can be opened!
More info: Premiere pro CS4, Win XP sp3 32bit, PC AMD64 3200+, 3 GB ram.
Inside project: a couple of avi non compressed video and a couple of jpg still images. And some transitions and text. Background music. Very simple.
I hope you can let me know how to get back to my project, and also to export in avi. Help! Thanks!
Addition:
PS: maybe the codec error I attach can be the cause? How to solve?

Unfortunately, both Sherlock and G-Spot do not see the Adobe MainConcept CODEC's correctly. Adobe uses a naming convention, that they do not understand, but it's done to "hide" those CODEC's, so that other programs do not overwrite them.
Now, there have been reported instances, where a full-paid version of PrPro has "reverted" to the trial version. The trial version cannot do anything with regard to MPEG.
In those cases (do not know the causes), the fix has been to uninstall CS4, run the Adobe Clean Script CS4 several times, rebooting between each run, then installing CS4 again, then updating it. This has worked in every case, that I can recall.
What caused the full-paid versions to revert is a mystery to me, and I have yet to hear of the cause.
Sounds like your full-paid CS4 now thinks that it's the trial version. The steps above should get it fixed for you.
Good luck,
Hunt

SOftware installation problems with x-fi xtreme music - he

I just installed the card into my computer.
Of course I wanted to install the latest drivers so I went to creative support and chose everything properly. I downloaded "Creative Sound Blaster X-Fi series Driver 2.07.0004"
When I clicked on the downloada exe file I got message "error code 5002" and it wouldn`t install. Then i went to crati've site once again and looked for that error code - they don`t have anything on that!
Then I manually unpacked exe and started setup.exe - it worked this time. And now I got some "creative audio console". When I click on it I get apparently some cripeled version of software, since there is no equlizer controles and where is that fancy THX setup huh?
I was angry, because all the sites that tested x-fi had some pictures of that management software looking like this http://techreport.com/reviews/2005q4/soundblaster-x-fi/index.x?pg=4
-Why do i have some cripeled sound controls with half the features missing anyway. I tried to figure out the drivers version on that sites and it was "Creative 5.2.5.4"; why was then I offered the "Creative Sound Blaster X-Fi series Driver 2.07.0004" as the latest drivers on creative support site?
I tried to run some aditional setups in unpacked drivers from the creative; namely the setup.exe in "AUDCON" folder, but then I get the error code 6003.
WHat`s up with all that?Message Edited by infiniti on 0--2006 04:40 PM

Boy I'm sure glad I found this thread as I to just received and installed my new X-fi card, then went to Creatives drivers section online and got the drivers (They scanned my puter and said you need this one > critical) and once done I'm looking for my "Cool Blue" tools as I to got that error message on the first CD install but finally got the drop down menu deal from the top of my monitor screen.. I took you guys advise about putting the CD back in again and it was NOTHING like the first time I installed it..Cool graphics and sounds came blasting through my Bose..Sweet.. It was like a totally different set-up from the first and now my new drop down menu has all kinds of cool stuff on it and I now also have an Icon on my desktop.. Thanks to the guy who was peed off and posted or I never would have found my answer from you others. :smileyvery-happy: Winamp sounds GREAT now on the jazz stations..

Installation problem with LV8.2 and VISION 8.2

I have installed LV8.2, then installed NI Vision v8.2 Development Module. When I made a new blank vi and put vision function icon into it, the dialog box came out ( as attached below). I don't know why, please help me.
Attachments:
error3.JPG ‏13 KB

Good morning Trinight,
The VI that you are using, IMAQ Create.VI, is actually installed by the Vision Acquisition Software cd, and is part of the NI-IMAQ driver. What is the version of the IMAQ driver that you have installed? Is this error consistent among all IMAQ VI's? Does the same thing happen with Vision functions, such as IMAQ Overlay.VI?
Please respond and I'll do my best to help out!
Jeffrey P.
LabVIEW Product Management
National Instruments

Software mirror problems with disk management and diskpart

I have a small server. It was originally using a single 250GB drive and one partition. It was a Dynamic Disk. Using Acronis I successfully did a backup/restore of the system to a 1TB drive to provide for storage.
I have two new same model Western Digital Blue standard format (512 sector) 1TB drives. One has the restored working system mentioned above. The other is empty. It is showing as a dynamic disk unallocated.
I attempt to mirror the system by using disk management, right-click on system drive and select "Add Mirror", get and choose 2nd disk selection, and the system churns for a few seconds and returns error message about DiskMgt not having up-to-date
info. I close and restart DiskMgt and get the same thing.
I invoked DiskPart and executed Select Volume 0, ADD Disk=1, after a few seconds I received the same error message.
I have tried both of these methods numerous times. I ran chkdsk /f/r on the primary drive and retried with same results.
Tom Fleischmann

Hi Tim,
à
the system churns for a few seconds and returns error message about DiskMgt not having up-to-date info
Would you please let me know the complete error message that you can get when mirror?
Meanwhile, please refer to following thread and check if can help you.
Windows
7 Pro Mirror
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

ATI Radeon drivers problems (both open-source and proprietary)

Hi 2 All!!
I have a problem with my ATI Radeon 9000-series. The open source drivers (xf86-video-ati) don't work very good for me, my monitor's fresh rate isn't "at-top" and the monitor projection is slightly translated to the right (say 8-12 pixels). So I've tried to build the official drivers with ABS, all is gone successfully, except for some worrying warnings, but I thought that it's normal. I have a customized kernel, build through ABS... So, when I've tried to load the fglrx module it says:
# modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.27-ARCH/video/fglrx.ko): Cannot allocate memory
Please, help me! My machine is slow, I can't run any OpenGL-accelerated application, even Quake III!!! If you can suggest me how to improve the performance and how to resolve problems with open-source drivers, it also would be very good... Thank you and sorry for my poor English please.

I had some problems with installing ATI drivers recently (could not build fglrx module, not even manually, I had to change some installation script), but with latest driver version (8.11 I think) from ati.amd.com was everything fine (I have Radeon 9600 Pro)
Try to do this (and write here the output)
glxinfo | grep vendor
fglrxinfo
In both cases, it should write something like OpenGL...: ATI... if there will be MESA or DRI, that means that you don't have loaded your fglrx module.
If fglrxinfo output will be something like: no permission for...(should be first or second line of the output), then write this somewhere in your xorg.conf:
Section "DRI"
Mode 0666
EndSection
run:
modprobe -a fglrx - and give here the output. If there will be none, run:
lsmod | grep fglrx - to see wheter fglrx module is really loaded in kernel
if you will have no module, you can install one, type:
cd /lib/modules/fglrx/build_mod
sh make.sh
cd ../
sh make_install.sh (as root)
and post any warning or error here at forum, drivers (but not fglrx module) are installed at /usr/share/ati
After installing drivers, you also need to configure your system (notice your system that it's there), commands:
aticonfig --initial (for editing your xorg.conf)
aticonfig --overlay-type=Xv (acceleration support in xorg.conf)
Showing your xorg.conf file here is also good idea, here is mine (sections Device and Screen):
Section "Device"
#VideoRam 262144
# Insert Clocks lines here if appropriate
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

Anyone NOT having problems with ITunes 8 and latest firmware update???

I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

My iphone 4 was crushed on the road. Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact mean

My iphone 4 was crushed on the road. Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact apple store. What does that mean please?

Is the replacement exactly the same as the original ie same memory size & same version? If so it may require updating the OS software before trying to restore your stuff from the backup.

Software Installation Problems with Media Source and Nomad Explo

Similar Messages

Maybe you are looking for