Software inventory report and PC show different information

Hi,
The scenario is the following:
SCCM 2012 R2.
Clients with windows 8.
The report "Software registered in Add Remove Programs on a specific computer" and "Programs and Features" show different information.
Programs and features screenshot(ordered by name):
Report screenshot (ordered by name):
The question is:
Is the above normal behavior?
if not
How to get in the report "Software registered in Add Remove Programs on a specific computer" all of the software listed in "Programs and Features"?
Thanks in advance!

Take a look at that device in Resource Explorer. Notice that on a 64-bit device there is an 'Installed Applications' class and and 'Installed Applications (64)' class. This data comes from the registry, and on a 64-bit operating system there
are actually two separate 'Add/Remove Programs' lists that are aggregated in the OS user interface.
If in Resource Explorer you see all of the software you expect to see, but not in the report, it is likely because the report is only looking at the 'Installed Applications' class and and not 'Installed Applications (64)' class.
If you enable the 'Installed Software' class (either by going into the client settings or the AI node), you will notice that the 'Installed Software' class is a combined version of both the 32-bit and 64-bit applications. This is much easier to report
off of.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Similar Messages

Reports and Console Show Different Information for Compliance

Hello,
Could someone enlighten me as to why for a specific Software Update deployment group I should see different compliance figures when I look at the deployment status in the console and when I run a Software Updates - A Compliance report?
For example for a recent batch of updates sent out I get the following figures from the Monitoring > Deployments part of the console; Total Assets 4,239, Compliant 2821, In Progress 37, Error 14, Unknown 1367.
If a run a report for the same batch of updates I get; Total Assets 4,238, Compliant 3343, Non-compliant 725, Unknown 170.
I suspect the difference might be due to a change having taken place for the set of updates e.g. Microsoft changed one of the updates to expired etc. and this has caused the clients to have to check their compliance status again.
What changes to an update that is part of a deployed update group would cause clients to have to check their compliance again and why would the report be different to the console?
Thank you for any help / advice.
Stephen

Hello,
I would be interested to know how the two different ways of looking at what should be roughly the same data can show quite different stats. At the moment for one deployment of software updates the Deployment Status pie-chart tells me that 3,006 clients are
compliant but the report tells me that 3,360 are compliant.
What seems to have happened is that an update that is part of the deployment changed its status so that the clients are having to check their compliance status again. This is slowly happening and I can see on the Deployment Status pie-chart the number of
compliant clients is slowly going up but on the report the compliant number seems to have remained high almost as if the need for the clients to re-check their compliance has not been taken into account.
Thanks.
Stephen

Software inventory reports being discarded

The software inventory reports are being discarded for our MP's, and I'm trying to determine why, so at the very least we can verify it's a non-issue. Attached is a copy of one of the discarded XML files. If anyone can take a look at it, or let me know what
I'm looking for (specific characters that would cause the xml to fail parsing and be discarded, or keywords, anything like that), would be much appreciated.
Discarded XML log

Enable Debug logging on MP, maybe this could give us more info of why the XML is discarded.
Juke Chou
TechNet Community Support

Run a software inventory report

hey...
I'm new with ConfigMgr and i'm trying to run a complete software inventory report... the report in asset intelligence is not very friendly, or maybe its because i dont understand them....
can someone please help?
i would basically like to see all software installed on all clients...

Hi,
I would start with the report "Software - Companies and Products > Count all inventoried products and versions " it will give you an installed count per application.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

I m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

i m updated my phone but some problems occured, so i connect it to itunes and it said "your iphone is detected in recovery mode" so i tried restore it but was unsuccessful and it shows different unknown errors such as 14, 2009,1611. Please help

Hello Mubashir surf google and try pressing power and home button at the same time untill apple sign shows up and then leave it .
Otherwise surf google you mite have to edit you host file in windows , system32
Let me know if it works

Software Inventory Report Filtering

I am needing to run a software report to only show Office 2007, but any computers that were upgraded to office 2013 spiceworks will still show on my report. I have tried to filter out does not contain office 2013, I have even tried to filter out the product keys but no luck. Any suggestions would be appreciated.
This topic first appeared in the Spiceworks Community

Peter,
Thanks.
I set 7 days interval for simple plan(hardware inventory),1day interval for software inventory.
But it seems not work now.
Hey, I am back
First I recommend changing both of these. Hardware should be set to daily and software should be set to every 14 days. Keep in mind that software inventory os almost never used anymore and I has too much over head.
http://be.enhansoft.com/post/2013/10/03/Slow-Software-Inventory-Cycle-in-SCCM-2012.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

ODS and Infocube showing different results

Hi,
I loaded same data to Infocube and ODS but they are both showing different result in BEX.
ODS
ODS report is showing summarised values e.g
vendor               order value                   invoice value        date
00001                    20                               20                 01.01.2007
Infocube
result is showing not summarised values
vendor               order value                   invoice value        date
00001                    20                                 0                      0
                              0                                20                  01.01.2007
I would like to make the infocube result same as the ODS because I am remodelling so that we start reporting from Infocube rather than ODS.
thanks

Hi,
this is the scenario
currently we are reporting from ODS object which fetch data from 3 ODSes. now I am asked to remodel so that we can report from infocube not ODS.
steps I have taken so far.
- created new infocube
- created 3 update rules ( same Update rules that gives the reporting ODS data).
my target is to make sure that the current ODS report is the same as the infocube report but so far the report is not consistent
I compared the data in the ODS and infocube and they are exactly the same but the report is showing differently

Is it possible to query software inventory report for Oracle SQL developer installation?

Hi all
My company requires to generate a report of all kinds of Oracle database access tool. I can find Toad installation from Add/Remove Program and therefore can query for Toad.
However, Oracle SQL developer is using Java. I cannot see an entry for Oracle SQL developer from Add/Remove Program. Is there a way to query inventory for Oracle SQL developer installation?
Thanks a lot.
Regards
Lic

You might be able to use software inventory to report on the version of sqldeveloper.exe.
As the app looks like just a zip you extract to a custom location that might be one method.

Count and Sum show different in Summary tab

Hello friends,
Webi 4 version
I have a webi dcument with 4 report tabs. Summary, Expense,Revenue and Forecasting.
I have a SUM value in Expense tab and Revenue tab. I also have Count value in Forecasing.When I copy these SUM and Count values to Summary tab, they show different values than those in other tabs.
Please help me to resolve this
Thanks
Renpal

Hi Renpal,
Even if we write the aggregate values in to a variable and if you copy that variable in Summary tab it may not give the same result.For Example.
If count of Sales orders in Detail tab is showing as 500 and in Summary tab it may show as 489. This is because in Detail tab there might be some cells which are "#" or Not assigned. so due to granularity it will count each and every cell, incase of summary all # or Not Assigned are calculated as 1.
Can you check wrt the above example where exactly the data is not matching.
Regards,
G.SaiNath

Mac and Windows showing different hard drive space remaining?

Hello Guys,
I am using my 1tb hard drive with mac and windows and while checking the space remaining, my mac says roughly 600gb left and my windows comp. says about 500gb left. I am just wondering which one of the storage remaining statements is correct and why they both show different numbers (by 100gb)? If it helps, this also happens to my 16gb flash drive. mac says 10 gb left, and windows says less space left (dont remember actual number, but was roughly 6-8).
Just asking becuase I want to know why such a big difference in size remaining. Could it have to do with the way each OS sees what defines the harddrive as full?
if it matters, my hdd format is MS-DOS (FAT32).
Thanks a lot,
krm1897

haha its been 2 years. And no, i didn't figure it out, but i speculate it may have to do how Mac OSX and Windows reads the FAT file system (my tb hdd was FAT formatted so i could use it on both OS) and calculates remaining space.
That may be right, or it may be completely wrong lol
krm1897

Dba_index_name and dba_ind_columns showing different results

Hi All,
I am confused why it is showing different results:
[email protected]#>select index_name from dba_indexes where table_name='CRBTPROV_FINAL';
INDEX_NAME
CRBTPROV_INDX1
[email protected]#>select index_name from dba_IND_COLUMNS where table_name='CRBTPROV_FINAL';
INDEX_NAME
CRBTPROV_INDX1
MSISDN_IDX
When trying to drop index MSISDN_IDX it gives error:
ERROR at line 1:
ORA-00054: resource busy and acquire with NOWAIT specified
But when trying to check where all the index is used using v$access:
select * from v$access where object='MSISDN_IDX';
no rows selected
Regards,
Kirti

If I run the following query on a 9.2.0.6 database, no index is listed:
select type, count(*) from v$access group by type;CURSOR
FUNCTION
NON-EXISTENT
PACKAGE
SEQUENCE
SYNONYM
TABLE
TRIGGER
VIEW
It seems that index is not taken into account by v$access ?

Migration of Anwers reports and Dashboard to different Machine

We are at very Inital level of development have created Repositories, Answers Reports and Dashboard on dev machine. Now i want to migrate to another box. So what are the files we will migrate. Please guide.

This one is based on TECHNICAL NOTE 369:
OBIEE: Migration from development to production environment.
DEVELOPMENT SERVER:
1. Stop Oracle BI Services
2. Take backups of the most recent development files (for recovery purposes):
a)Repository:           \OracleBI\server\Repository\*
b)Presentation Catalog:\OracleBIData\web\catalog\*
c)NQSConfig.ini:          \OracleBI\server\Config\NQSConfig.ini
3. If any Software registry strings were modified or added, export them.
4. Take backups of any customized GIF, CSS, GSP, XSL, and XML files from
                    \OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res
                    \OracleBI\web\app\res\
for postinstallation replacement of like production files.
PRODUCTION SERVER:
5. Copy any customized folder/file structures especially those of step 2 and 4.
6. Define necessary back-end database ODBC DSNs and/or native drivers required per repository Connection Pool(s) data source names definitions.
7. If created, import the saved development registry export.
8. Verify BI Server ODBC settings: There is an ‘Analytics Web’ ODBC System-DSN with the driver 'Oracle BI Server' installed on the Presentation Server box.
9. Verify Presentation Catalog Path: OracleBIData\web\config\instanceconfig.xml
10. Start Oracle BI Services
11. Verify Dashboard Web connection.
Regards, Thomas

Inventory report that can show min/max

Dear All,
Our client is looking for the inventory report for items that fall below the min levels (per warehouse and per item level). Is there an existing report can tell us those info? I cannot find it anywhere in SAP. Thanks.
Regards,
Yuka

Hi Gordon,
I suggested our client to use a simple user query but they said they were under the impression this was a readily available report. I don't believe there is any but just in case there is any. Thanks for the respond. I will let them know.
Regards,
Yuka

Mac and iPhone showing different number of songs

I have iTunes match enabled to the same (and my only) account on several devices. They are all showing different # of songs:
iPhone: 1,331
iPad: 1,328
Mac: 1,315
PC: 1,139
Why? How do I get all the tunes on my Mac and especially PC?
I have synched with the cable to my PC and received no errors.
Help!

haha its been 2 years. And no, i didn't figure it out, but i speculate it may have to do how Mac OSX and Windows reads the FAT file system (my tb hdd was FAT formatted so i could use it on both OS) and calculates remaining space.
That may be right, or it may be completely wrong lol
krm1897

Mac, iPad and iPhone show different iCloud Drive content

I'm getting mad about iCloud drive.
For hours I try to get all my devices in sync. But they all show different content. In Finder I can see only 4 app folders containing the documents (actually pages, keynote, numbers and pdfexpert). Browsing the iCloud drive on the iPad for example using the pages app I can also see a GoodReader folder and some more. Some of them are empty folders (maybe empty folders are hidden on mac by default?) but some of them contain folders and files which obviously won't download to my Mac.
There are also some folders related to apps I removed from all my devices. It's ok if these app's iCloud folders stay in the cloud if they contain any documents but they stay there even if they are empty and there seems to be no way to remove these folders manually (even the web interface of iCloud greys out the trash when such a folder is selected).
When I use OS X Preferences to remove some old app's iCloud content I can do this for some of them but then (all of a sudden - can be after two of ten removals) the list on the left side shows only "Backups" (or sometimes "Backups" and an unspecific "Documents") and you have to close the Preferences and reopen it a little later to see the complete list again. And showing the app icons seems to be a problem too (including the iPad / iPhone preferences -> iCloud) - some of them are shown, for some of them there are only placeholders.
Am I doing it wrong or are these common problems?

Same problem here – specifically, the CONTENTS of "iCloud Drive" are different when accessed:
A) in the Finder on Yosemite
B) on the web at iCloud.com
C) on an iOS device
The MAJOR problem for me is that my Goodreader folder only shows up on the iOS device, making it impossible for me to access my Goodreader files. This is a huge issue for me as my workflow depends on having access to those files.
In general, however, it's ridiculous that you can copy data to iCloud Drive on your iOS device and then you cannot read that data anywhere else.

Software inventory report and PC show different information

Similar Messages

Maybe you are looking for