!!!!!Software Is Corrupting My Cameras!!!!

Anyone come across this problem.
Once I have downloaded photos from my camera using a USB connection I can not turn the Camera back on. Its broken about £1000 worth of digital cameras. At first I thought it was just my camera but when it happened a second time I realized it was Adobe Album Starter 3.0 that was the common factor!! Can the Camera's be fixed as it would seem that the camera is not broken but the software has some how prevented the camera from turning back on.

You should be able to send it in to the manufacture and they can delet any corruption to your digital camera program. Call your camera manufacture. I am not saying you did, this is why you do not buy disount items off the street.
Old Man of the Sea

Similar Messages

How can i re install the OS if the software gets corrupted in OSX 10.8 ?

how can i re install the OS if the software gets corrupted in OSX 10.8 ?

If the hard disk is damaged:
1. Press Command and R keys while your Mac is starting.
2. Open Disk Uitlity, select Macintosh HD in the sidebar and repair the disk. If it can't be repaired, take your Mac to an Apple Store

I cannot install itunes from the apple site .. it keeps saying the software is corrupted and cannot install correctly.. help!!!

I have tried to install the software from several sites including the apple site and they all say that the software is corrupted and did not install correctly to delete and reinstall. this seems unlikely as it has been weeks since I have been retrying the sites with the same results...is there an apple download that will check my pc for any errors that may be keeping the itunes from installing.. or is there anything else i can do to fix the issue.. its unlikely that itunes could stay corrupted for so ling without noticing it and fixing the issue..thank you...

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HT1414 why wont iphone4 download ios6 without saying the software was corrupted during download

why wont iphone4 download ios6 without saying the software was corrupted during download what do i do n how do i resolve this i jus need an update as it is on ios4 still and *****

im having the same problem. i talked to a friend of mine who is basically a genuis and he said it probably is Apple's server...that so many people are updating and its causing this. i havent found a true answer yet, i tried to call apple support, but that was hopeless. i thought maybe restoring my phone or something, but i dont want to do that and then realize that if i waited til tomorrow or so that i didnt have to. but im stuck just like you guys!

My computer reads my iPod as if its software were of a camera's. i've already reset it, and it still hasn't changed the iPod's software format. What do I do??? Please help me!

My computer reads my iPod as if its software were of a camera's. i've already reset it, and it still hasn't changed the iPod's software format. What do I do??? Please help me!

To get iTunes to see the iP{od see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
It is normal and expected for the computer to see the iPod as a camera.

Lost the software of my pc cam what can i do?

hi i lost the software of my pc-cam 300 i can't not erase the pic i have n i can't not take the camera no where , is working fine like web cam how can i download the software ?
thanks

Which OS are you using now? If you are using Windows 2000/XP, you can check this knowledgebase article SID5079 on how to retrieve the pictures from the PC-CAM using Windows Explorer.
Jason

7210 Supernova Software got corrupted

Hi,
My Nokia 7210 Supernova's OS or software got corrupted 2 days ago. I took it to a repair shop and shopkeeper reinstalled the software. But since then I am not able to run any of the downloaded applications including the Browsers like Bolt or Opera mini. I can't even download the apps from the net. It says "Certificate not on SIM or phone". What should I do? Thanks in advance.
Regards,
Shashank Srivastava.

Do one thing since you can not go to nokia care you can use nokia software updater to update to latest software version & reinstall the software version, might be that can solve this problem.
If you like my post then Plz click on Green Star on left side to add Kudos
Also, if you find my this post suitable to answer then plz click on "Add to Solution" tab on right

My vista software was corrupt so Microsoft remotely reinstalled it but I lost my itunes library. My songs are still on touch is there any way to get them back into my library?

My Vista software became corrupt so Microsoft reinstalled remotely but I lost my Itunes library even though I thought I saved to an external HDD.
Songs are still on touch but how do i get them to back into library so I can manage and back them up. Is there a way to back up the itouch?

Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

My iphone software was corrupt

hi... i need help. When i first received the iphone, i accidentaly erase all the setting ( the icon application) and nothing was left. How can i return it? So i visit a cellphone repair and they install me the software, the icon was return. After 11 days, my phone was totally block out, cannot be on, no longer functioning. Wken it was connected to computer itunes, it says it's in the recovery mode. What does it mean? When i bought it to technician, he told me that it was " SOFTWARE WAS CORRUPTED" is that possible? So they install me again a new software and it cost mich...Where can i get that software? is that possible i install it myself through i tunes? pls help me

No one here can help you. You're using a hacked phone which is not supported by Apple. You'll need to take it back to whoever hacked it for help.

How to update iPhone if the software is corrupted

please help me,
how to update iPhone if the software is corrupted???

amol rampurkar wrote:
sill it is not happening..... showing same error.
Do i have to take the backup or not?
It would help if you told us what the "same error" is.

When I am trying to update software to iOS6 on a Iphone 4 in India, it gives a message that software is corrupted. Please advise what to do.

When I am trying to update software to iOS6 on a Iphone 4 in India, it gives a message that the Software is Corrupted. Please advise what to do and how to rectify it.

Are you running a Developer Beta Copy?
Pete

Software update corrupt. Can't update or restore :(

I have an Ipod Touch 5th gen running iOS 6.1, however I am trying to update it to iOS 6.1.2 but no matter what I do it will not update or restore and Itunes keeps giving me an error saying that the software update was corrupted during download after waiting an hour for the update to download each time.
Things I have tried:
Tried updating over the air by going into settings > general > software update on the Ipod - but the ipod just hangs forever where it says checking for updates with the spinning pinwheel and does not go any further (I let it sit for about an hour at that screen and it still said that it was checking for updates!)
I have tried disconnecting and reconnecting my Ipod many times - didn't work still get the error when updating
I have tried restarting my computer many times (my computer is running Windows 7 Professional x64) - didn't work still get the error when updating
I have tried soft-resetting (I think that is what it is called) the Ipod by holding down the sleep/wake and home button until the apple logo shows up - still didn't update got the same error
Tried reinstalling the Apple mobile device USB driver in the device manager in windows.
Tried connecting the computer and Ipod to my other wireless network.
I have tried putting the Ipod into recovery mode (where it shows the connect to itunes screen) and then tried updating or restoring through itunes - didn't work either still get the same error
Tried putting the Ipod in DFU mode and then tried updating and restoring- still didn't work get the same error
Finally I have tried manually downloading the ipsw file and then holding shift while clicking on update to select the downloaded firmware file like I read in another thread on this site - but that STILL did not work and I got an error that it could not be updated because the firmware file was corrupt.
I have even tried the last option with the Ipod in DFU mode - still no luck.
It seems like I have tried every single option and at this point am really frustrated since I cannot update or even restore my device. Is there anything else I can do or do I need to take it into an apple store to see if they can update it? Will they be able to update it for me in the apple store and will they charge me any money for doing it? (my Ipod is still under warranty as far as I know).
I also thought that maybe it was a temporary glitch with apple but I have tired this for THREE DAYS without any luck. I have NEVER had this issue before and was always update to update over the air or through Itunes
Nothing is wrong with my Ipod other than not being able to update it over the air or through Itunes. The only reason why I am trying to restore or update it to begin with is so I can have the latest iOS.
Has anyone else, or does anyone else have this issue, and if so how did you fix it?

All I can suggest
- Is to download the update file on onother computer/network and try to copy to your computer and try again
- Make an appointment at the Genius Bar of an Apple.
Apple Retail Store - Genius Bar

I am trying to reset my 4th generation ipod touch via itunes (as I cannot remember parental controls code). In itunes it does a download but then says the software was corrupted during download. Itunes is up to date. Operating system is vista. Any ideas?

I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
"The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
Any advice very much appreciated.
Thank you
UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.

A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to
         update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Did Lightroom software update and now camera won't tether

I have been using my Canon 5D Mark II tethered to Lightroom 4 successfully for quite some time. Last week I downloaded the software update and now the camera will not tether. I have tried two camera bodies and neither work. Both cameras will tether with Lightroom on a different computer (that didn't get the update). So, it's the software. Help!

Hi
try a safe boot - holding down the Shift key until it starts up -
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
More info on what a Safe Boot does at http://support.apple.com/kb/ht1564
also follow the rest of the troubleshooting guide at http://support.apple.com/kb/TS2570

!!!!!Software Is Corrupting My Cameras!!!!

Similar Messages

Maybe you are looking for