Software issues for Canon LBP7110cw printer

I recently bought a Canon LBP7110cw printer and after installing App Store updates, I am still unable to print.  I downloaded the driver and software through Canon, but I still can't print. Any other options?

http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_print...
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

  • Printer Dialog for Canon S9000 Printer

    I dug out my large format Canon S9000 printer and am having trouble color correcting the photographic prints. Part of the trouble seems to be that in OS 10.6 I don't seem to be able to get the printer dialog box from the printer utility. When you go into the printer driver all you get is Canon S9000 in the box and I don't seem to be able to get into change any of the driver settings. Can anyone help? Thanks.

    spinosaurus wrote:
    I did download the latest driver for the S9000 available, although it is updated I believe only through OS X v10.5 and not 10.6.
    The driver update is for 10.6. If you have v10.36.2.0 installed then at least there should be some level of comparison between my setup and yours.
    I talked to Canon support and they told me that Apple writes the printer drivers for the OS systems and not them.
    This is not true. Canon creates the drivers and provides them to Apple so that it they are available via Software Update.
    Since you are using the same driver from Canon, maybe you could answer some of the following questions: What color space do you use for importing your photograph, sRGB, AdobeRGB, ProRGB, etc.? What color space do you use for viewing your photograph? Do use any ICC print profiles to print?
    For the photo that I used to test, it was taken on my Canon EOS7D and imported using Image Capture. The Get Info for the photo shows the colour space as RGB and the colour profile as sRGB IEC61966-2.1.
    For printing I selected the Canon profile to match the Canon Photo Plus Glossy, which is shown as GL3/SG3 in ColorSync. When PS was managing the colour this was selected via the PS print dialog > printer profile. When I selected the printer to manage, I used the Quality & Media tab to select the paper which in turn sets the profile, as seen in the Color Options menu.

  • No Driver for Canon MP610 printer

    Hello! I recently updated to Leopard. When I went to print using my Canon Pixma MP610 printer I received a message that “no printer was selected.” I then selected to add my printer but then a follow up request asked to select a driver or printer model. The drop down listed the Canon Pixma MP500 & MP 700 but not the required MP610. What should I do? Please help. Mike

    Hi
    Get your printer software from the Canon website direct and install. I live in the uk so make sure you select your country correctly. For uk drivers and software go-to http://software.canon-europe.com/products/0010488.asp

  • How to install Windows 7 64 bit driver for Canon i9100 Printer?

    When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver.  Visiting the Canon website, I find an update module for the Windows driver.  Canon says the printer MUST be installed using Windows Updater before their driver update can be installed.  I have tried everything, but I cannot get Windows to find a driver.  Windows Updater says that my computer is Up To Date.
    What am I doing wrong?
    Thank you,
    David

    Hi Honeycutt,
    The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update.  Please try Microsoft's web page for assistance with troubleshooting this:
    http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Still no joy for Canon i450 printer

    Print problems with update
    this page is my test page
    printing with Safari
    http://news.yahoo.com/s/ap/us_cisco_restructuring
    Canon i450
    prints the framework but not the article
    not fixed with first update
    not fixed with second update
    Canon mp560
    fixed with first update
    not broken with second update thank god
    paranoid pat smells an abode rat
    anybody get their i450 to print

    I was just about to tell you the black tank was ok
    when it sunk in that maybe all that was being printed was color.
    So tried test page, nothing to compare to, but something printed, looked black.
    Tried to clean nozzle, no joy.
    Pages printed nothing but a blank sheet of paper.
    Tried to deep clean nozzle. no joy.
    So I thought maybe go back to basics and put a few lines in textedit
    and throw in a line of red font just for fun.
    I saw red and nothing else.
    I had a black cartridge at hand
    so I thought I would try.
    And, as you diagnosed, the old cartridge was dead
    Long live the new cartridge.
    and thank you very much

  • Looking for Canon i9900 print driver

    I am looking for a print driver for my Canon i9900 large format printer
    Canon support indicates no driver is available

    You will have to use the Gutenprint v5.2.10 driver package. That model is too old for Canon to provide a supporting driver.

  • Drivers for Canon S400 Printer HELP!!!

    Hello,
    I'm trying to get my old Canon S400 printing, but I am having no luck. I have downloaded drivers 4.1.5 and 4.8.3 however when it came to printing, my printer was recognized as a "Canon FJ360" and when I tried to print, blank sheets came out even though I have topped up all of the ink cartridges. Does anybody know any fixes or other drivers that I could use in this case? I have the printer connected through an AirPort Express N.

    I "think" the included Gimp-Print drivers include the S400 - you should try that for troubleshooting. (I say "think" because I have updated my Gimp-Print to Gutenprint:)
    http://gimp-print.sourceforge.net/MacOSX.php3

  • Software issue for creative!!!

    I have to say that i cannot understand a company that sells you a product and doesnt have the software available for download if somthing goes wrong is this another pathetic money making idea from creative board room cigar smoking fat cats to force you to buy another cd have creative merged with AOL? i have been reading loads of posts in this forum with people having the same issue i think you should take note and count then add all the pruducts we have bought from your greedy company and rethink about your greed for the $ get the software back up for download and stop being so stupid.:angry:

    for anyone thinking of buying a webcam and needs the software Logitech still has it ready available on there site with no hassel or con to order another CD

  • Text Window rotation issue for SATO GL412e printer

    Dear Friends,
    I am working for Labels to print in SATO GL412e
    I have read the SATO documentation for Smartforms and done the same accordingly the documentation but the window text is not rotating as 270 degrees.
    I have used the command also as given.
    ROTATE_270_1 <'Window NAME'>
    Please help me on the same.
    Thanks & Regards,
    Tarun

    actually here is a much better one:
    http://www.sapfans.com/forums/viewtopic.php?f=14&t=105845

  • Notice of Software Issue for Printer; Is it spam?

    I ahve a All in one e printer Product ID is CQ140A and Model C510a. I received a notification claiming I may have faulty software. It asked I download something called "Troubleshoot HP Printeroftware Install."  I did.  When I stareted it, it stated that the first step is to remove old software, then run troubleshoot, then reinstall software.  I stopped.  The "help" feature referred me to what appeared to be HP website, and it is there that I used password to get into site, but I could find nothing referrencing the above.  Was it Spam?  If not, should I try to find the troubleshoot software again.  I deleted it fro  my desktop where it had been downloaded. I use Windows 7, recently installed in new computer from a crashed earlier computer
    This question was solved.
    View Solution.

    I am not sure about the email you got, but you can update the printer directly from its front panel assuming you have it connected to the internet.  See the document here for information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Color Printing issue on Canon MP600 Printer and Mavericks upgrade

    I realize that some people have been having problems scanning with the new upgrade on their printer, however, I am have trouble printing in color with the new Mavericks upgrade. Black and white is fine, but if there is any logo or color fonts, they are distorted. How do I go about fixing this?

    I too was having the same issue where I was unable to print in color on my MP600 with Mavericks. It printed incorrect font, colors and distorted the size and placement on page .  I followed the above instructions to download the MP600R via the Canon UK website and it has solved my problem. 
    If anyone is as computer illiterate as I seem to be: After downloading the MP600R driver and installing it, I went to System Preferences>Printers and Scanners> delete the printer currently listed>add a new printer and select the MP600R from the list of software to choose.
    I have yet to delete any software/driver files related to the old printer, so I was able to correct the problem simply by downloading the new driver, deleting the current printer, and adding a "new" printer selecting the MP600R.
    So happy it is now resolved as this has been driving me crazy for months!

  • Looking for driver updates for canon 1133iF printer for 10.9

    before I upgraded to Maverick I had no problem printing on the company wirless printer Canon 1133if all in one. Does anyone know of any new drivers / updates that can solve this issue?
    thanks,
    R

    It says in here it supports Mavericks.
    http://software.canon-europe.com/products/0011046.asp

  • Installed driver for Canon MP640 printer but when I use comes up with communication error

    Hello
    I have just purchased a new IMac and have had very little to do with Apple before so everything is foreign.  I used the help desk today to download the driver for my printer Canon MP640 which came up as connected with the green light.  When I went to print my first document it is now coming up with an error that ther is a "communication error".  I am not a techno person and don't have a great deal of patience with technology.
    Please helllppp.

    See the second box of  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Where do I go to get software updates for my wireless printer hp 4620 series

    I have a wireless printer hp 4620 series. It came with an installer cd that only allows use of OS X , Mountain Lion, and Lion. My system is OS Yosemite. The cd told me that the installation was not recommended and I should get software update from Apple. but did not give me a link as to where I could go. Please help! I need to re-establish my wireless connection between my Apple and my printer. ASAP.

    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-125737- 3&cc=us&dlc=en&lc=en&os=4159&product=5191646&sw_lang=
    It should print with old drivers but you need the updated drivers for scanning.
    Also see:
    Troubleshooting printer issues in OS X - Apple Support

Maybe you are looking for