Software Lifecyle Manager Problem

Hi,
We have installed SOLMAN 4 ABAP+J2EE without SLD and Central SLD in standaone J2EE. we want to use SLM in the J2EE addin for solman. but the connection to SLD is not working even the SLD data supplier is configured correctly in the j2ee addin as we can transfer data to central SLD
we receive the error when connecting to SLM
Cannot connect to SLD server; CIM_ERR_FAILED: Object manager is not activated
How to connect SLM to SLD?
Thanks

Hi,
Plz use the steps provided below to make the connection in SLD.
1.Logon to portal, http:// username/passwd. Save it.
13.Goto "System Administration" à System Configuration à Connection Tests à Switch View.
14.Now use this system for connecting Portal to R/3 system or any other system.
The Forum site does provide a way to attach documents to answers. If such a facilty was provided, I would have attached the screen shots too.
Cheers!!!!
Sukanta Rudra
Note:Helpful answer, plz award points

Similar Messages

Problems with integracao of the JDeveloper with Software Configuration Management (S

1) Error with JDeveloper 9i and Software Configutarion Management (SCM)
I have a problem with the JDeveloper 9i integrated with the repositorio 6i (SCM). When I make checkout of a
source in java of the repositorio, after that I make the alteration and later I make checkin of this source,
some times occur an error of feed of checkin or occurs error of checkout in case that it obtains to
make checkin.
2) Error when I open one branch and later that the alteration was finished I want to finish this branch.
when beginning one branch to tabalhar and I make alterations in a source in java, and to the end I want to
finish this branch, appear a message informing that some source in state of checkout exists, but when I go to
verify in the stack of checkout, do not exist no source or to folder.
Somebody could help me?
In case that it has the solution or it passed for these experiences?

Hi Uwe :-)
We know, that we have to raise the parameter PROCESSES to solve our problem (for a while). But we want to solve and understand the problem once for all.
And we noticed, that the processes raise everytime, we open a web-page in the visual editor in the JDeveloper. And we want to know, if anyone knows why. Or should we have forgot to set any parameter. Maybe its a bug of the JDeveloper version, we are unsing.
I just have found the error, that occurs in JDev.
Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler foundMaybe this is helpfully? :-/
Regards
Majo
Edited by: DerMajo on 09.11.2009 07:49

Software Deployment Manager Starting problem

Hi,
I had installed netweaver for Java edition. I can open my portal using http://localhost:50000/irj/portal. i am wondering how to open the Software Deployment Manager. Can some one help me in finding Software Deployment Manager.
cheers
ram

hi Anil,
I am sorry, let me rephrase the question. I couldnot locate where can i find this SDM. can you tell me where can i find this SDM.
cheers
ram

Configuration of Software Lifecycle Manager with MOPZ

We want to use MOPZ and additionally the Software Lifecycle Manager functionality which is available as of SP15 of SSM. Where can i find documentation about this functionality? We have the problem if i call transaction /TMWFLOW/MOPZCA that the Web Services for SLM are not available. Which Web Services? I have created a http connection to the SLM server (Java stack) like the description in the help of IMG.
How can i connect a software repository to MOPZ/SLM ?

Hello,
For this problem I had many debug sessions with SAP.
Now a new note is availabe:
Hinweis 1154188 - SLM web service authentication 700 SP14
please check.
Unfortunately I'm stuck in the next problem - download doesn't work in MOPZ.
I think this is my next case with SAP.
regards,
Christoph

Prime Infrastructure 1.2 - Software Image Management

Good Day,
I have some issues with CPI 1.2. I've tried to Import Images from Cisco.com through Software Image Management
for test purposes by using my credentials. But it has finished success just a twice. Other attempt hadn't any result.
Then I try to choose Image for my test 3750E switch, sometimes I have error message like bellow:
After I choose another image and return to first that I need, and press <Submit>, I have a message that "Image collection job CCO Image Collection Job is Scheduled Successfully":
I wait some time and refresh, but I don't see any new Images. The same problem exist then I try Import Images from connected Devise. I use Shedule Start Time - Now.
Also, I can't view any information about Image in Device Work Center:
Any ideas, guys?

I'm having the same issue. I'm thinking there are still a lot of bugs in PI that Cisco needs to work out. LMS is still the better option for now in managing your switching environment. I know that Cisco hopes to role all device management under the umbrella of PI, but they still have some bugs to workout IMO.

LMS Software Image Management - Telnet failure

Hi all,
I had a problem with Software Image Management for the upgrade of a switch.
It seems that at the end of the upgrade, CiscoWorks was unable to save the configuration with telnet.
Yet, telnet seems to be ok because CiscoWorks manages to connect to the switch at the beginning of the upgrade.
Updating config file during software upgrade processDevice running-config is modified but failed to save the running-config to startup-config.Cause: Could not detect SSH protocols running on the device
TELNET: Failed to establish TELNET connection to 10.1.3.4 -Cause: Authentication failed on device 3 times.
I sent attached the logs of the upgrade.
Thank you in advance.

Hello,
The job fails last night after timeout.
I have reschedule job this morning for 2 switchs :
2960 with telnet and ssh enabled
2960 with telnet enabled only
The device credentials verification job seems to be coherent :
Device Name
Read
Community
Read Write
Community
Telnet
Enable
by Telnet
SSH
Enable
by SSH
1.
switch04-d
Ok
Ok
Ok(Primary Successful)
Ok(Primary Successful)
Failed to connect.
Did Not Try
1.
switch03-d
Ok
Ok
Ok(Primary Successful)
Ok(Primary Successful)
Ok(Primary Successful)
Ok(Primary Successful)
But the job fails again cause telnet authentication failed on device 3 times.
I do not understand why LMS does not use ssh if possible at the finish of the job? Why telnet authentication fails ?
Thanks in advance.

Installation of Sum (Software Update Manager)

Hello People
I have a problem with the installation of packets in my system BW in the stack to java.
The tool JSPM this not working and I opened a message in support sap and they comment that tool for packages update, is changed per SUM "Software Update Manager"
I don't have idea of how install this tool or how use this tool.
Someone has the how to for the installation this tool.

Hi Marco,
You need to read below section
Using the Software Update Manager (SUM) - SAP NetWeaver Identity Management REST Interface Version 2 - SAP Library
For guides and documents
refer - Software Update Manager (SUM): introducing the tool for software maintenance
Starting the Software Update Manager GUI - SAP NetWeaver Identity Management REST Interface Version 2 - SAP Library
Once you download the SUM, just uncar it and use above guide to start and run.
Regards,

CiscoWorks Vs TACACS+ ??!! sw management problem--Pls help me out

Hi Gurus,
I have a query to ask on the software image management.Please help me out.
There are many cisco devices in my client place, but only one device is creating a problem.
it is 2950 catalyst switch. CiscoWorks is complaining that 'it has no image to import', when we run a job to fetch the image from the switch. but it has image under root directory of Flash. After going through RME troublshooting and tips , I came to know that the connection protocol is telnet and ssh. Then I add the following commands in TACACS+ (to allow CW2K) user which is a centralized authentication system for all user including CiscoWorks.
Cisco has mentioned this error in following URL:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
It looks like it is having difficulty to recognize the Flash (though it shows the files in the inventory) and at the same time, I am not sure whether the commands are complete.
I allowed the following commands to be used by CiscoWorks through TACACS+:
1. copy tftp flash
2. copy flash tftp
3. erase flash
4. show version
5. show flash
Refer the URL: http://www.cisco.com/en/US/customer/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html#wp1045599
Screen shot of the error and Detailed inventory report of the device are attached here.
Please help me out with your expertise whether it is a TACACS which is stopping CW2K to view the Flash and files? or it is a problem with CiscoWorks to see the Flash.

This document describes the procedure to configure the CiscoWorks Hosting Solution Engine 1.8.1 (HSE) using ACS as a TACACS+/RADIUS authentication module.
ACS TACACS+ Setup for HSE
ACS RADIUS Setup for HSE
On Cisco.com, see also the Administration chapter of the User Guide for the CiscoWorks Hosting Solution Engine 1.8.1.
http://www.cisco.com/en/US/products/sw/cscowork/ps150/prod_connection_guide09186a00802b2bae.html

[ Helix ] Rear camera picture malformed, but video is fine. Software or hardware problem?

Hi, it's is my first post here, so welcome everyone
I've just purchased Helix 3702-3LO (i7, 8GB, 128GB, Win8Pro 64bits upgraded to 8.1) and today found some problem. Pictures taken by rear camera are malformed. The picture looks like:
https://drive.google.com/file/d/0B5MpmFU1Jqq8Ym5ucGt6WDhUQXM/edit?usp=sharing
But at the same time video taken by the camera is perfect. So how do you think, is it software or hardware problem?
I've already tried refresh drivers, update what was possible to update, but still no imrovement, I still want avoid sending the computer to the service. It looks like some part of the image (bottom) is paste in the middle. Looks like codecs problem???
But now I'm not sure if it is only software problem or may be some how hardware (video is recorded is fine).
Thank you.
Moderator note; embedded picture >100K removed About Posting Pictures In The Forums
Solved!
Go to Solution.

Thank you kroe, you were absolutely right!
I rolled back the driver and it's fixed now, I should think about this in first place! :-)
"Device manager" > "Imaging devices" > "AIT Webcam" > Right Mouse Button Menu > "Properties" > Tab "Driver" > "Roll back driver" > OK
and now I have, like you wrote, "Integrated Rear Camera" instead of "AIT Webcam"
And the photos are perfect now :-) Thx again.
So.. problem SOLVED! Thx

Software Download Manager not downloading files?

I am working with software download manager and it gives me the error message about the download cannot be completed. My internet connection is fine but I think their might be a problem with the download manager. What are some possible reinstallation areas
I can consider and what could possibly be the problem?
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering
- Yoda. Blog - http://www.computerprofessions.co.nr

Hi,
You can check this issue in Clean boot to see if other security app or Firewall blocking the downloading behavior.
Also we can use Process monitor and Network monitor to track the downloading events and see if any component of this program was blocked or the network communication was interrupted.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Network Monitor 3.4 Downloads
http://blogs.technet.com/b/netmon/p/downloads.aspx
Kate Li
TechNet Community Support
Sorry for the later reply, I have resolved this by using an alterative internet connection at a relatives house which was faster.
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering
- Yoda. Blog - http://www.computerprofessions.co.nr

Apple MacBook Power Management problem

Many times when I notice my battery running down quickly, when I check open programs, I see Pages and Numbers. These programs were typically used to view an attachment when I was in email and I have forgotten to shut them down.
When they are running in background, they often appear to use a lot of battery. My battery can drop 20-40% faster when these programs and a few others are open in background.
I have sent Apple several feedback requests over the past year with no apparent fixes happening. I would like to see the program hibernate to low use. If necessary, I would like to see them add an option that let's me manage background apps sue of power better.
Rather than get 4 hours on my MacBook Pro with Retina, It often drops to around 2 hours.
If anyone else agrees that this is a problem, please go to Apple Feedback and let them know so we can get better battery life.
I have spent the past several months researching and turning off everything that I can that impacts the battery. I did find that allowing sync,etc while in sleep mode was also drawing down the battery a lot so i had to turn it off as well.
I have contacted Apple, they have checked my battery, I have done appropriate resets, and I have also reloaded OS and software. The problem with Pages, Numbers and other programs persists....
Again, if you are also having battery life problems, check this out and send feedback if you are also seeing this problem.
Thanks,
TC10

sending apple feedback won't do much, it's not a problem from the OS in general, as all other MBPretina have 6+ hours of battery.
- I only have verbal from Apple, but they told me the 3-4 hrs that I was getting was normal
" I would like to see the program hibernate to low use.": it already does, it's called App Nap.
Did you check in the activity monitor that the Pages app is indeed the app that drains the battery?
- I checked the activity monitor, Pages and Numbers show up on a regular basis
"I have contacted Apple, they have checked my battery,": this 2 hour battery isn't normal, they haven't noted anything. didn't they have an explanation for this?
- they told me to try the resets and try a reinstall which I did. I then took it to one of their Apple certified service depots and they told me the battery is within spec... so it was not their problem ...
- This problem has been ongoing since I bought the Macbook Pro. Not sure what to do next when they say the battery "passes their tests"... That is why I have seeing what else could help.

Software / class management

Hello,
i have done one project in lvoop : a T° calibration software
now i have another one with humidity but software are used separatly
I see i could reuse most of the first one but i don't know how to manage it :
1) i can use the same project but softwares are distinct and T° classes and devices linked to will be loaded for nothing
or maybe i could load them dynamically but for the moment it isn't the case
2) or creating a differente project so how can i reuse classes used in the first one
and how to do when changing class parametes or functions. how to have shared classes
i think the first solution could be the best way but as i am new to sofware management
i would like to collect points of view of experimented developers
What do you think about ?
Best regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

Hi tinnitus,
It is quite hard to answer your
question....
In fact usually in Object Oriented you should think about the
maintenance and upgradability of your application.
What I can suggest you is
to create a general class (the parent class) then different children depending
what type of measurement or sensor you use. Then you can implement your code
using Dynamic Dispatch (the VI Server for LVOOP ;-). So your code will
automatically invoke the proper method depending the class he's got as input.
Using this approach you can have a very generic top level VI calling
dynamically the class children.
A dynamic dispatching subVI
has some small overhead when LabVIEW looks up which subVI to invoke. The
overhead is constant. It does not increase as you add more classes or as you
add more dynamic VIs to a class. There can be a performance hit if the subVI
call has to make extra copies of the parameters to match the functionality of
the actual subVI LabVIEW invokes. You can avoid this by wiring the input front
panel terminals to output front panel terminals even on dynamic VIs that you
never expect to call (for example, parent VIs that exist only to
define the connector pane for children to override). You can also use Data By
Reference in you class to optimize memory management.
Feel free if you have any
further question.
upgradability
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/

Software Configuration Management for ABAP Development ?

Hi,
we are a software company selling a Data Capture Solution.
For this, we are currently in the process to develop an interface for transferring the extracted data into a customer's SAP R/3 system.
Since we want to develop this interface following certain software engineering principles, we are looking for a way to solve certain simple common Software Configuration Management issues, such as:
- Object Versioning (Similar to file versioning in classic software development): That means being able to:
-- Keep track WHO changed WHAT WHEN and WHY?
-- Revert to a former version of an object (e.g. when the fix of a former defect must be revoked for some reason)
-- Keep track which changes have been made for a certain Change Request (NOT meaning SAP Change Requests, but Change Request for our interface development)
- Label a certain version state as 'released' or 'tested' or whatever
- Perform a kind of 'Branching' (Classical Software Configuration Management task), e.g. when we release a version of our interface and start the development of a new version, we must open a 'Maintenance Branch' of our released version parallel to the ongoing development of the future release.
When I say 'Objects', I mean everything being concerned when developing something within R/3; that can be ABAP programs, forms, tables (structure and content(!)), etc.
We are using an SAP System version ECC 5.0 for development; as for now, we have come to the conclusion to use the versioning that comes with the Transforms, although they do not really cover the above requirements as we would like to.
Is there anybody out there who had the same idea and solved it somehow?
My impression is that in the SAP world, classical Software Configuration Management is not a part of the way of thinking; and that development for SAP R/3 has little in common with classical software development.
But maybe there is an add-on or some hidden features of NetWeaver or anything that can solve these issues.
Hope is the last to die...
Thank you very much for any feedback,
Regards,
Jörg

Thank you very much for your answers!
@Pushkar:
No this is not exactly what I meant;
What we want to do is a kind of classical configuration management or at least version control of
development objects like ABAP programs, table definitions, table data etc. that are contained within our SAP development system.
It's not about version management of external documents imported into SAP.
I know that there is a kind of version control via Transports, but this does not cover all classical version control mechanisms; what we are missing there is
- the possibility of reverting to an older version of an 'object'
- Branching / Merging mechanisms
- the possibility to choose which changes I want to release with which transform and which objects
- view differences between arbitrary versions of an object
I was hoping there is maybe a kind of 'add-on' or maybe even a built-in tool that provides classical version control mechanisms or something similar.
Thank you for further help,
Regards,
Jörg

How to install Software Deployment Manager

Hi!,
I have downloaded the PDK files and want to deploy it? How do I deploy them? As per help I need SDM ( Software Deployment manager to deploy this files, from where I will get software deployment manager and how to use SDM to deploy PDK files...please help...
Also I have more query...
In my netweaver studion, when I goto window-->preference, why I can't see software deploment manager link? this SDM is used to deploy WebDynpro application with Enterprise portal....
Please help me....
Thanks !

hi
software deployment manager installed automatically in central instancc while installing sap netweaver .
Thanks
Bharathi.Ch

Software Related Graphics Problem

Hey Guys,
My iMac C2D 17" early 06 has been having some software related graphics problems. It hasn't occured a lot but it has happened a few times. Small black dots or bars may appear but when I click or hover over them with the mouse, they go away. So, I am thinking that it may be the hard drive because it could be misreading something that could make it not show certain pixels but I am not really sure.
Any help will be well appreciated.
Thanks

RAM Specs:
2 sticks of 512 MB PC2700 CL 2.5 Apacer RAM. I don't know if this matters but they're in DIMM slots 1 & 3.
I downloaded nForce drivers (version 5.10 as Richard suggested) and everything installed fine. However, the computer freezes whenever I'm using MSI liveupdate.
So, instead of using liveupdate I downloaded the nvidia drivers directly from Nvidia.com. During installation the screen flickered three times, and immediately after this the only thing appearing on the screen was a blinking cursor in the upper left; the computer just hung at this point.

Software Lifecyle Manager Problem

Similar Messages

Maybe you are looking for