Software Metering Rule not working SCCM 2012

No usage data found to generate software metering report.
mean that the
machines ran meteriing, but there isnt nothing on the machiine that matches the
meter rule so it says
No usage data found to generate software metering
report, int the SWMTRReportGen.log?
Please help me in this issue.
Regards,
Faisal Alvi

a common mistake is to configure a specific language and/or version that is not present on all machines.
Kent Agerlund | My blogs: blog.coretech.dk and
SCUG.DK | Twitter: @Agerlund | Linkedin:
Kent Agerlund | Author:
Mastering System Center 2012 R2 The Fundamentals

Similar Messages

SCCM 2012 Software Metering is not working

SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
I ran runmetersumm.exe on our server, it did not work as intended. :
Summarizing data up to 0 hours old.
File Usage Summary added -1 rows in 0 seconds.
Monthly Usage Summary added -1 rows in 0 seconds.
I am stumped. Why would it add minus rows?
Any ideas how I can make software metering work on our environment?
Thank you

Finally figured it out.
mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
After searching for a while, I found the solution from the link below:
http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
1. Deleted RULECHG.RTA under policypv.box folder
2. Removed and recreated metering rules again.
Everything is working again now.
Thank you.
I do wonder how to avoid those problems going forward though.

Multicast not working SCCM 2012 SP1

Hi,
Am having issues getting multicast working with SCCM 2012 SP1 / Server 2008 R2.
We have followed all the guidelines in this forum but still no joy
- Multicast setting enabled on DP
- Multicast Enabled on OS Image
- Task Sequence set to down content when needed
- SCCM DP and Client are on same VLAN to rule out routing issues
- Network team confirm all ok there end anyway
- Boot images / WDS and PXE are all healthy
The PC Boots via PXE ok and runs our windows 7 task sequence, when the task sequence starts it says "Opening multicast session" for about 5 seconds and then disappears. Its as though it tries but then fails. Unicast works fine.
I then set the OS image to "Only use Multicast" which produces the following error in the client SMSTS.log
reply has no message header marker
Failed to open session request (Code 0x80004005)
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
ClientRequestToMCS::DoRequest failed. error = (0x80004005).
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
Request to MCS 'SererName' failed with error (Code 0x80004005).
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
Multicast OpenSessionRequest failed (0x80004005).
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
Sending status message: SMS_OSDeployment_PackageDownloadMulticastStatusFail
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
Any idea on how we get this working ?
Thanks

The logs related to multicast that you'll see on the site server are:
mcsisapi.log
Records information for multicast package transfer and client request responses.
Site system server
mcsprv.log
Records multicast provider interaction with Windows Deployment Services (WDS).
Site system server
MCSSetup.log
Records details about multicast server role installation.
Site system server
MCSMSI.log
Records details about multicast server role installation.
Site system server
Mcsperf.log
Records details about multicast performance counter updates.
Site system server
http://technet.microsoft.com/en-us/library/hh427342.aspx
>> Network team confirm all ok there
end anyway
This is something to double and triple check. If Multicast is not enabled on the routers/switches properly, this will not work. If there is a firewall between the client and the distribution point that doesn't have the Multicast ports open, this
will not work.
Client -- > Distribution Point Configured for Multicast
Description
UDP
TCP
Server Message Block (SMB)
445
Multicast Protocol
63000-64000
http://technet.microsoft.com/en-us/library/hh427328.aspx
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Client Push Not Working SCCM 2012

I am new to SCCM and have a test rig SCCM 2012 for testing, problem is the client push fails every time and I am at a loss to explain why. I have tried removing and reading the DP, FSP and MP roles (Both these are on the SCCM core server) I have run IIS
reset, removed all AD configured Boundaries and Groups in favor of IP range but I keep getting the same errors. Any advice here would be greatly appreciated... Below is this mornings logs highlighting the failure.
<![LOG[==========[ ccmsetup started in process 5764 ]==========]LOG]!><time="11:31:48.304-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="7628" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="11:31:48.305-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="7628" file="util.cpp:1837">
<![LOG[Updated security on object C:\Windows\ccmsetup\cache\.]LOG]!><time="11:31:48.305-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="7628" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="11:31:48.306-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="7628" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="11:31:48.306-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="7628" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="11:31:48.308-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows Server 2012 Standard' (6.2.9200). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="11:31:48.366-120" date="01-12-2014" component="ccmsetup" context="" type="1"
thread="6436" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="11:31:48.366-120" date="01-12-2014" component="ccmsetup" context="" type="1"
thread="6436" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="11:31:48.366-120" date="01-12-2014" component="ccmsetup" context=""
type="1" thread="6436" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="11:31:48.366-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="11:31:48.368-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE: 224]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8668">
<![LOG[FSP: VKYV-HV01]LOG]!><time="11:31:48.369-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="11:31:48.370-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:8778">
<![LOG[Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:4539">
<![LOG[Retry time: 10 minute(s)]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4540">
<![LOG[MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4541">
<![LOG[MSI properties: INSTALL="ALL" SMSSITECODE="VSI" FSP="VKYV-HV01" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="11:31:48.371-120"
date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4550">
<![LOG[ \\VKYV-HV01.VKYV.LAN\SMSClient]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:4557">
<![LOG[ \\VKYV-HV01.VKYV.LAN\SMSClient]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:4569">
<![LOG[ VKYV-HV01.VKYV.LAN]LOG]!><time="11:31:48.371-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:4584">
<![LOG[No version of the client is currently detected.]LOG]!><time="11:31:48.374-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:2748">
<![LOG[Updated security on object C:\Windows\ccmsetup\.]LOG]!><time="11:31:48.750-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:9281">
<![LOG[Sending Fallback Status Point message to 'VKYV-HV01', STATEID='100'.]LOG]!><time="11:31:48.750-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x8004100e]LOG]!><time="11:31:48.752-120" date="01-12-2014" component="ccmsetup" context="" type="2" thread="6436" file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="11:31:48.752-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {037AE2A1-3C8B-482A-A180-04392D0312BA} has been sent to the FSP]LOG]!><time="11:31:49.020-120" date="01-12-2014" component="FSPStateMessage" context="" type="1"
thread="6436" file="fsputillib.cpp:752">
<![LOG[Running as user "SYSTEM"]LOG]!><time="11:31:49.058-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:1995">
<![LOG[Detected 44815 MB free disk space on system drive.]LOG]!><time="11:31:49.059-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="util.cpp:628">
<![LOG[Checking Write Filter Status.]LOG]!><time="11:31:49.059-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:2024">
<![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="11:31:49.059-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436"
file="ccmsetup.cpp:2051">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=VSI))']LOG]!><time="11:31:49.179-120" date="01-12-2014" component="ccmsetup" context="" type="0"
thread="6436" file="lsad.cpp:656">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>VSI</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=VSI FSP=VKYV-HV01</CommandLine> </CCM><FSP> <FSPServer>VKYV-HV01.VKYV.LAN</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0"
/></Capabilities><Domain Value="VKYV.LAN" /><Forest Value="VKYV.LAN" /></ClientOperationalSettings>']LOG]!><time="11:31:49.228-120" date="01-12-2014" component="ccmsetup" context=""
type="0" thread="6436" file="lsadcache.cpp:236">
<![LOG[Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.]LOG]!><time="11:31:49.229-120" date="01-12-2014" component="ccmsetup" context="" type="1"
thread="6436" file="ccmutillib.cpp:373">
<![LOG[The MP name retrieved is 'VKYV-HV01.VKYV.LAN' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="11:31:49.229-120"
date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="lsadcache.cpp:334">
<![LOG[MP 'VKYV-HV01.VKYV.LAN' is compatible]LOG]!><time="11:31:49.229-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="lsadcache.cpp:339">
<![LOG[Retrieved 1 MP records from AD for site 'VSI']LOG]!><time="11:31:49.229-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="lsadcache.cpp:287">
<![LOG[Retrived site version '5.00.7958.1000' from AD for site 'VSI']LOG]!><time="11:31:49.231-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="siteinfo.cpp:575">
<![LOG[SiteCode: VSI]LOG]!><time="11:31:49.231-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:2076">
<![LOG[SiteVersion: 5.00.7958.1000]LOG]!><time="11:31:49.231-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:2077">
<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="11:31:49.231-120" date="01-12-2014" component="ccmsetup" context="" type="1"
thread="6436" file="ccmsetup.cpp:2111">
<![LOG[Only one MP VKYV-HV01.VKYV.LAN is specified. Use it.]LOG]!><time="11:31:49.232-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:10080">
<![LOG[Searching for DP locations from MP(s)...]LOG]!><time="11:31:49.232-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:11018">
<![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="11:31:49.232-120" date="01-12-2014" component="LocationServices" context="" type="1" thread="6436" file="lsad.cpp:770">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="11:31:49.232-120" date="01-12-2014" component="LocationServices" context="" type="0" thread="6436" file="lsad.cpp:714">
<![LOG[Current AD forest name is VKYV.LAN, domain name is VKYV.LAN]LOG]!><time="11:31:49.235-120" date="01-12-2014" component="LocationServices" context="" type="1" thread="6436" file="lsad.cpp:842">
<![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="11:31:49.237-120" date="01-12-2014" component="LocationServices" context="" type="0" thread="6436" file="ccmiputil.cpp:117">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="11:31:49.237-120" date="01-12-2014" component="LocationServices" context="" type="0" thread="6436" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="11:31:49.239-120" date="01-12-2014" component="LocationServices" context="" type="0" thread="6436" file="ccmiputil.cpp:1172">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="VSI"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name="VKYV.LAN"/>
<Domain Name="VKYV.LAN"/>
<IPAddresses>
<IPAddress SubnetAddress="10.6.2.0" Address="10.6.2.2"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="11:31:49.256-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{CC48E819-7755-4650-83AC-8BC823C06C8C}</ID><SourceHost>VKYV-HV01</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:VKYV-HV01:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>VKYV-HV01.VKYV.LAN</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-01-12T09:31:49Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1096"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="11:31:49.256-120" date="01-12-2014"
component="ccmsetup" context="" type="0" thread="6436" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://VKYV-HV01.VKYV.LAN/ccm_system/request']LOG]!><time="11:31:49.257-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="httphelper.cpp:807">
<![LOG[Failed to receive ccm message response. Status code = 403]LOG]!><time="11:31:49.434-120" date="01-12-2014" component="ccmsetup" context="" type="2" thread="6436" file="httphelper.cpp:1694">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="11:31:49.435-120" date="01-12-2014" component="ccmsetup" context="" type="3" thread="6436" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'VKYV-HV01.VKYV.LAN'. Error 0x80004005]LOG]!><time="11:31:49.435-120" date="01-12-2014" component="ccmsetup" context="" type="2" thread="6436"
file="ccmsetup.cpp:11261">
<![LOG[Sending Fallback Status Point message to 'VKYV-HV01', STATEID='101'.]LOG]!><time="11:31:49.435-120" date="01-12-2014" component="ccmsetup" context="" type="1" thread="6436" file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x8004100e]LOG]!><time="11:31:49.437-120" date="01-12-2014" component="ccmsetup" context="" type="2" thread="6436" file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="11:31:49.437-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {1D445639-95B1-4EC5-A65F-FC7A721F8061} has been sent to the FSP]LOG]!><time="11:31:49.455-120" date="01-12-2014" component="FSPStateMessage" context="" type="1"
thread="6436" file="fsputillib.cpp:752">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="11:31:49.455-120" date="01-12-2014" component="ccmsetup" context="" type="0" thread="6436" file="ccmsetup.cpp:8835">

Does you MP/DP use HTTP or HTTPS? I recommend to start with HTTP and when you have successfully installed a few clients, you can switch to HTTPS if desired. HTTPS based communication requires more steps e.g. client certificates.
Have you extended AD schema and do you see objects in \System\System Management container in AD?
Also, you might have DNS name resolution problem or the firewall is blocking the traffic from the client to MP.
The client is having troubles to successfully talk with MP:
Failed to get DP locations as the expected version from MP 'VKYV-HV01.VKYV.LAN'. Error 0x80004005
Panu

DP Job queue manager not working- SCCM 2012 SP1

I am getting below error when trying to open DP job queue manager in sccm 2012 SP1
Please find the details information
see the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException: The SMS Provider reported an error. ---> System.Management.ManagementException:
Invalid query
   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
   --- End of inner exception stack trace ---
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
   at DPJobMgr.Form1.SummaryRefresh_Click_real(Object sender, EventArgs e)
   at DPJobMgr.Form1.SummaryRefresh_Click(Object sender, EventArgs e)
   at System.Windows.Forms.TabControl.OnSelectedIndexChanged(EventArgs e)
   at System.Windows.Forms.TabControl.WmSelChange()
   at System.Windows.Forms.TabControl.WndProc(Message&
m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd,
Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1008 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
DPJobMgr
    Assembly Version: 5.0.0.0
    Win32 Version: 5.0.7958.1000
    CodeBase: file:///C:/Program%20Files%20(x86)/ConfigMgr%202012%20Toolkit%20R2/ServerTools/DPJobMgr.exe
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1002 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
Microsoft.ConfigurationManagement.ManagementProvider
    Assembly Version: 5.0.0.0
    Win32 Version: 5.0.7958.1000
    CodeBase: file:///C:/Program%20Files%20(x86)/ConfigMgr%202012%20Toolkit%20R2/ServerTools/Microsoft.ConfigurationManagement.ManagementProvider.DLL
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.233 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
System.Data.Linq
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1015
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Data.Linq.dll
System.Management
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
AdminUI.WqlQueryEngine
    Assembly Version: 5.0.0.0
    Win32 Version: 5.0.7958.1000
    CodeBase: file:///C:/Program%20Files%20(x86)/ConfigMgr%202012%20Toolkit%20R2/ServerTools/AdminUI.WqlQueryEngine.DLL
System.Configuration
    Assembly Version: 4.0.0.0
   Win32 Version: 4.0.30319.1015 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1015 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.237 (RTMGDR.030319-2300)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true"
/>
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Hi,
That is as expected, the new tools require Configuration Manager 2012 R2 to work. From the download page of Configuration Manager 2012 R2 toolkit.
"Note: Items with an * are new in the R2 Toolkit and require Microsoft System Center 2012 R2 Configuration Manager for full functionality.
Server Based Tools
* DP Job Manager - A tool that helps troubleshoot and manage ongoing content distribution jobs to Configuration Manager distribution points.
* Collection Evaluation Viewer - A tool that assists in troubleshooting collection evaluation related issues by viewing collection evaluation details.
* Content Library Explorer - A tool that assists in troubleshooting issues with and viewing the contents of the content library"
So you need to upgrade to R2 before you can use the new tools.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM- software metering rules.

HI All,
Can some one share the information on how we can create software metering rule for Adobe in SCCM 2007?
Also, where can we find the correct file name or product name for the software to be metered?
Rgs,

Here are the Technet information and a step by step guide about software meetering:
http://technet.microsoft.com/en-us/library/bb633043.aspx
http://blogs.msdn.com/b/minfangl/archive/2011/04/29/step-by-step-on-how-to-use-software-metering.aspx

Automatic creation software metering rules

hi
I have installed SCCM 2012 r2 with two servers .A site server and a database server .I enabled software metering on client settings and software and hard ware inventory .But I ve got a problem that sccm doesn't create software metering rules automatically
.I had already enabled Automatic create software metering rule on SMW properties . But no luck yet.
when I create a rule manually It works fine but Its not working automatically .

you have configured 2% of computers must use the disabled programs to activate automatically (Specify
the percentage of computers in the hierarchy that must use a program before a software metering rule is automatically created) .so pls check if any of the computers are using the disabled programs or not.Login to test computer and use the disabled
program and then check the status.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr
I have more than 500 clients with enabled software metering .Dont you think it is enough to create rules automatically .?

My FaceTime with the new software upgrade is not working

My FaceTime with the new software upgrade is not working.how do I fix this

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

What works in 2008R2 is not working in 2012 SP1

Setup:
Visual studio 2010 and 2012.
Database: both 2008R2 and 2012 SP1
Issue:
I have a CLR routine that does bulk update.
I have trigger on the tables that are being updated.
Using the same code and the same data, This bulk update query works in 2008, but does not work in 2012, WHEN there is more than one record to be updated.
My query is simply an update statement, updating table 1 from fields in table 2
I get no errors when I trace through it in Visual studio 2012, the data simply doesn't update.
However, if I run it in studio manager, I will get a range of errors, like, 'statement is terminated', or that there was an error in the trigger, or that it completed successfully, but the data does not update.
Disabling and re-enabling the trigger works, but that's not a good idea, and since I have many bulk update queries (and have been plagued with issues for the sites that have updated to 2012), I need a solution.
Any one run into this? Any ideas about what I can do?

Well, earlier you said:
sometimes I get 'the statement was terminated' (nothing else), or I get some error occurred in the trigger, or I get query completed, but the data did not update.
So there is some confusion about what exactly is occurring. But without code, there is nothing to do but speculate. Now you say that when there are multiple records that match the criteria it does not work. I assume that your context here
is the update statement - when it updates multiple rows the trigger does not have the desired effect. If that is not correct, it would help if you could clarify a specific (and hopefully simple) scenario for this case.
But based on this information, it seems that the trigger may have an assumption built into it that is not appropriate. A trigger does not execute for each row - it executes at the statement level and the virtual tables (inserted and deleted) can contain
any number of rows (from zero - yes, zero - to any number). Often developers do not realize that the logic must be written to handle a variety of rows; rather they assume that only 1 row is present. I would also suggest that perhaps a
similar assumption is made in the update statement you posted - but I don't know the relationship between the 2 tables (Invoice and Cust) so I could be wrong. Perhaps the update statement joins a customer to multiple invoices in some cases (rather than
an assumed 1 invoice per customer)? Perhaps there is some other oddity that is not evident from a distance.

Infopath form load rule not working in browser forms but works on Client

Hi
I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
It works when I open it on client, but on the browser it fails.
Have anyone encountered such an issue.

Check below:
http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
This look like a bug. Here are the steps below that will lead you to the bug:
Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
Open and Save category, click the Rules button and add a new rule in it and save it.
Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
If this helped you resolve your issue, please mark it Answered

Defaulting Rules Not Working for Repair Orders in OM?

Hi,
Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
But in our project we are using Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
Please help me to solve this issue ASAP.
Thanks,
Kishor

Hi,
You have like this:
1. Price list
2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
You have to make
1. XXOE_DEFAULT_PVT.custom_code
2. Price list
3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
Did you made own custom code to pick currency?
Regards,
Luko

XP software disc does not work on 8.1 HP PSC 2355v All in One Printer

Please excuse my novice actions in the subject description as I put my problem and request there. Basically: My XP software Disc will not work on my Windows 8.1 computer for my HP PSC 2355v All In One Printer. Needless to say I can print with a downloaded driver but can not use the Managerial software on the XP disc. When I try to work from the printer it does not recognize the computer, so is there HP software out there that can be downloaded simply to my computer? If so, Where and How can I get it. Thanks again.

Hi,
Unfortunately no more support after Vista but you can use basic function of the printer using the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N135752
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business!

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business! I could understand if they didn't know, but it is all over the Internet! When I went in to have it revert back to os6 (which worked fine!) I was actually asked if I had done any research before I installed the upgrade! As if this is the consumer's fault for being dumb enough to fall for the upgrade!

That is not what I have discovered, nor what others have discovered, nor what I was told when I went the Genius Bar. I cannot remotely mirror to my MacBook Pro and it only started the day after I installed the upgrade. We tested it with an iPad that had not been upgraded, no problem.

HT1338 my software update does not work using OS X 10.6.8: update icon just stays static and times out, although web is online

My software update does not work: the icon jams and then times out, although web is online. How to resolve??

Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs>

Software Metering Rule not working SCCM 2012

Similar Messages

Maybe you are looking for