Software needed for Audigy 2 Platinum

I've just bought a second-hand PC complete with the Audigy 2 hardware (including the external control box, speakers etc.), but no software!?I've downloaded the drivers from the soundblaster site, but first prize would be copies of the original CDs that came with the equipoment. If anyone has this kit and is prepared to make copies of the CDs for me, I'll gladly reimburse them. Many Thanks!

Visit?http://badboy.hub.io/?and download the ISO image.

Similar Messages

Software needed for the USB device, "USB Interface Controller TEST2.0"

My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
"Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
"Software Update is not able to connect to the Internet. Please check your configuration and try again."
I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

Which is the software needed for an installation on a production server

Hi,
which is the software needed for an installation on a production server (windows 2008) of Forms/Reports 11g ?
I mean the old 10g stand alone forms and report service but un 11g release ..
Regards

For application deployments (production), you will need the following software. The same is true for a design-time environment.
1. Weblogic Server 10.3.2
2. Fusion Middleware 11.1.1.2
See my update in the following:
Re: Some FORMS quesion...
All products are contained within the Fusion Middleware (Forms, Reports, Portal, Discoverer) distribution. This includes Builders, Runtime components, HTTP Server, Web Cache, etc. During the installation process, you choose which you want to install.

Need driver disk ISO for Audigy 2 Platinum

Hello,
I have an Audigy 2 Platinum EX sound card and need a driver disk ISO image.
I have already read the big ISO image thread and tried the Audigy 2 ISO from Badboy's site, but this ISO doesn't really work with my card.
During the setup it sais something like "No card found".
My Audigy 2 Platinum EX is called SB0320
Could somebody upload a working Audigy 2 Platinum EX driver disk ISO?
Thanks
Wolfgang

kampf-keks wrote:
Hello,
I have an Audigy 2 Platinum EX sound card and need a driver disk ISO image.
I have already read the big ISO image thread and tried the Audigy 2 ISO from Badboy's site, but this ISO doesn't really work with my card.
During the setup it sais something like "No card found".
My Audigy 2 Platinum EX is called SB0320
Could somebody upload a working Audigy 2 Platinum EX driver disk ISO?
Thanks
Wolfgang
?Just search using "BadBoy" "ISO" here so you'll get the link.
jutapa?

Install CD for Audigy 2 Platinum

So I had an ugly HD crash, and had to replace and reload.
I've had an Audigy 2 Platinum card for forever, but cannot locate the install CD which has all the goodies on it, including, apparently, some features that you can't get in the support download section, such as the mixer, the speaker setup utility, even the troubleshooting utility.
What I downloaded and installed was the driver package, and that gets the soundcard going, but any of the other updates/upgrades apparently assume you already have the mixer console and other features installed, and from what I can read here, it appears those only exist on the install CD, and it looks like..yup..no longer available from Creative.
can anyone give me some guidance?
How do I get an install CD?
Is it available any longer from Creative and I just need to ask?
Thanks!

Re: Install CD for Audigy 2 Platinumv Download and burning an ISO..no problem.
Went with installing the audigy 2 software, but not the mediasource stuff (first selection, but not the second).
First install, got a message about a missing handler, continued anyway, found that in the speaker testing/selection section i was showing "<<no strings>>" in the "speaker/headphone selection" dropdown. ?
Also, then, discovered the diagnostics were missing.
So I did a repair, seemed to go as expected, but still same issue.
When I run diagnostics, it tells me the following fail:
wave driver
midi driver
mixer driver
mixer settings check
So..next ste
ps.
going to reinstall, do a reg cleanup, and go with standard install defaults. I may have gotten too picky with the custom install. I hate to let this thing just bloatware me to death, but likely have no choice.
I have audio, the card works, etc..but I had that when I had just the basic drivers installed originally.

Hardware/Software needed for WebForms?

My company is planning on migrating a Forms 3.0 application to
WebForms (we need to support both Win95/98 PCs and Macintoshes).
I understand the basic 3-tier structure (i.e. database server,
application server and browser based client), but I'm still
unsure of what hardware and software is actually needed for the
application server (especially since Oracle keeps changing the
names of their products). Can anyone tell me what the hardware
and software requirements are for a WebForms (w/reports)
application server assuming that I don't have anything yet (NT
or Unix)? Also, what are the general memory/disk requirements if
the server needs to support about 100 concurrent connections?
Thanks,
Douglas Scott
null

John Funk (guest) wrote:
: Frank Huether (guest) wrote:
: : Douglas Scott (guest) wrote:
: : : My company is planning on migrating a Forms 3.0
application
: to
: : : WebForms (we need to support both Win95/98 PCs and
: : Macintoshes).
: : : I understand the basic 3-tier structure (i.e. database
: : server,
: : : application server and browser based client), but I'm
still
: : : unsure of what hardware and software is actually needed
for
: : the
: : : application server (especially since Oracle keeps changing
: the
: : : names of their products). Can anyone tell me what the
: : hardware
: : : and software requirements are for a WebForms (w/reports)
: : : application server assuming that I don't have anything yet
: (NT
: : : or Unix)? Also, what are the general memory/disk
: requirements
: : if
: : : the server needs to support about 100 concurrent
: connections?
: : : Thanks,
: : : Douglas Scott
: : From my (low) memory.
: : Reserve 128 MB for OS and Web Server (NT).
: : For every connection guess about 10 Meg each and remember
: : running Reports out of Forms means another connection for
: : Reports. So 100 Forms users running reports are 100 more
: : connections.
: : Good idea would be to have load balanced servers.
: : If you are deeply interested I can dig somewhere for the
: : documentation.
: : Frank
: Frank,
: I am in a similar situation as Douglas. But I am not sure
: WebForms can handle a 250+ forms application. Are you aware of
: anyone running an application that big using WebForms (any
: version)?
: Thanks,
: John
John,
there is an Oracle marketing slogan about the Norwegian tax
ministery (or so) running with about 5000 users concurrently.
But they are only dealing with the number not further details.
I'm just pushing a customer with a +- 100 form app to the web
and they want ot go production in mid February. They (especially
their admins) are very open to the technology and there are only
some issues on prinitng from forms using customs documents,
invoices and delivery notes. But I think after some changing of
the print philosphy it will be working.
If you are interested mail me and I will try to give you some
hints after production.
Frank
null

Help needed for Audigy and Audigy 2

Hi, I got a set of Audigy Platinum EX and I have a Audigy 2 ZS. Can I use the external I/o part of Audigy Platinum EX on Audigy 2 ZS?Thanks

Remember you pay your carrier every month for them to provide you with a quality service.
contact them again, and ask them to provision your account correctly.
Once that is done, go here and create a new BIS account.
https://bis.eu.blackberry.com/html?brand=tesco
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Is an Antivirus software needed for a Mac OS X Mountain Lion?

I am relatively new to the Apple Mac OS X Mountain Lion. Could anyone tell me if I need an antivirus program for my Macbook Air? And is there any software to clean my Mac of all unnecessary files. Thanks in advance.

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Use with caution.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
The free anti-malware application ClamXav is not crap, and although it’s not routinely needed, it may be useful in some environments, such as a mixed Mac-Windows enterprise network.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Software need for oracle rac 10g r2

Hi,
Can any one please give the exact link to download the Oracle Rac 10g r2 for the setup of rac.
Thanks & Regards,
Poorna Prasad.

Hi,
On linux rhel4 we are installing the Rac .I am new to this high technology i need to create a rac set up on my own can any one please help me
Here is the details of our san storage
I am going to implement the RAC set up on my san storage .Here i am having 3 blades in my san and each blade is divided in to 4 parts as Vm1,vm2,vm3.vm4 virtual machines here i need to setup the rac database on vm4 virtual machine can any one please help me how to follow .
Here first i need to configure the shared disk storage before installing the rac.
And on vm3 virtual machine we have installed the oracle database 10g software.
The rac configuration is between vm4 virtual machin on blade1 and vm4 virtual machine on blade2.
Please help me.

Hi , Need Help Understanding proper software needed for my new macbook first time having it

im using a macbook pro 13inch and i just want to know what software i have to install to keep it up to date and safe from the flashplayer problem

Keep the system software up to date is all you really need to do. The malware to which you refer had nothing to do with Adobe's Flashplayer.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using ClamXav.
You should upgrade OS X to the latest version, 10.8.3, provided your computer is able to run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Software needed for Primavera P6 Enterprise Project Portfolio Management

Dear All,
Please help me, i want the list of software to install the Primavera P6 Enterprise Project Portfolio management for server side.
Please provide the list in order to install.
Thanks in Advance.
Amit

Hi Amit,
Assuming you are going for P6 r8.3 EPPM and currently have absolutely nothing deployed the order I would recommend would be.
1) Install Windows 2008 R2 SP1
2) Install SQL Server 2008R2 SP1 (express edition is not officially supported for a server deployment)
3) Install Sun JDK 1.7u15 (64bit) (set the JAVA _HOME Vartiable)
4) Install Weblogic 12.1.1
5) Apply patch 16176831 to weblogic
6) Create the 8.3 EPPM database
7) Install P6 8.3 EPPM
8) Configure and start Weblogic
Regards
Alex

Sound blaster 5.1 software needed for windows vi

I have installed sound blaster 5. card in my computer and my model number is SB0680 but my soundcard software is not installing in my vista os so i cant adjust my center,subwoofer volumes so kindly any one tell my the link to download the software for vista so any can help me pleaseMessage Edited by srinathgoku on 08--20070:59 PM
Message Edited by srinathgoku on 08-2-200703:5 AM

Hi,
Someone seem to have uploaded the cd image in this forum post.

Software needed for Pavilion dv2201ca web cam plus remote control function

HP Pavilion dv2201ca - Windows Vista Home Premium 32-bit
Replaced hard drive and reloaded software using System Recovery DVD and downloaded SP-1 and SP-2.
The web cam and the remote control features do not function after installing the above software and using online updating for the installed software.
Can someone please direct me to a link that will provide the proper web and remote software?

Didn't find the soft pac for the remote control installation, just instructions for using the TV functions. On a separate forum I found a reference to " sp40139 " to resolve the remote control problem on a different operating system. I downloaded the file (29Mb) but was afraid to install it for my 32 bit Vista Home Premium OS. If I could find the link to the location where this soft pac was located, I could probably find the correct one.
My computer dv2201ca is probably of Canadian origin ..... would there be a different support site for this?

Cannot install Creative Sound Mixer for Audigy 2 Platinum card - he

I've have this card and software working fine in my system for a couple of years. I just did a clean install to clear up some issues, and when I try to insert my Creative application disc and install the software, I get a blue screen every time with a STOP 9C error. I installed most of the applications I actually wanted manually but I cannot find/download/install the Creative Surround mixer which I would like to have. Any suggestions would be GREATLY appreciated!

michaelsweeden,
The blue screen is puzzling. But you should find a setup.exe on the installation CD in /Audio/SurMixer. Run that to install the Surround Mixer.

Sp scan software needed for scanjet 4070

my new Macbook Air from Apple does not permit my scanner sofrtware to be installed. Basically it tells me the software is not authorized, or somesuch thing, when I attempt to do this.
The software is "HP Scan" from HP, and my scanner is the HP ScanJet 4070 Photosmart Scanner.
Does anyone know how to get OSX 10.8.3 to allow the installer to reinstall it?
Thanks for any help.
- Brent

Thanks stedman1 -
I found out I could hold down the control key while selecting the HP Scan installer, select "open" and it would permit the installer to be loaded (with a warning). Then I did the same with a short update from HP (going back to March 2011) and now my HP 4070 scanner is back working again.
It sounds like your method would have worked also, since it was the security system stopping it.
Thanks again.

Software needed for Audigy 2 Platinum

Similar Messages

Maybe you are looking for