Software needed for Pavilion dv2201ca web cam plus remote control function

HP Pavilion dv2201ca - Windows Vista Home Premium 32-bit
Replaced hard drive and reloaded software using System Recovery DVD and downloaded SP-1 and SP-2.
The web cam and the remote control features do not function after installing the above software and using online updating for the installed software.
Can someone please direct me to a link that will provide the proper web and remote software?

Didn't find the soft pac for the remote control installation, just instructions for using the TV functions. On a separate forum I found a reference to " sp40139 " to resolve the remote control problem on a different operating system. I downloaded the file (29Mb) but was afraid to install it for my 32 bit Vista Home Premium OS. If I could find the link to the location where this soft pac was located, I could probably find the correct one.
My computer dv2201ca is probably of Canadian origin ..... would there be a different support site for this?

Similar Messages

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?

-->Click HERE<-- Does item "B" (Turn video on/off) in the last topic on the page help?
You control the camera for Skype from within Skype, so Skype must be running to running to make video work.
Message was edited by: EZ Jim
Mac OSX 10.7.4

Software needed for the USB device, "USB Interface Controller TEST2.0"

My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
"Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
"Software Update is not able to connect to the Internet. Please check your configuration and try again."
I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

Which is the software needed for an installation on a production server

Hi,
which is the software needed for an installation on a production server (windows 2008) of Forms/Reports 11g ?
I mean the old 10g stand alone forms and report service but un 11g release ..
Regards

For application deployments (production), you will need the following software. The same is true for a design-time environment.
1. Weblogic Server 10.3.2
2. Fusion Middleware 11.1.1.2
See my update in the following:
Re: Some FORMS quesion...
All products are contained within the Fusion Middleware (Forms, Reports, Portal, Discoverer) distribution. This includes Builders, Runtime components, HTTP Server, Web Cache, etc. During the installation process, you choose which you want to install.

My HP-Pavilion dv6 web cam is not working properly, fluctuating always

My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always

re-install drivers and try again. ( also easy capture )

Set resolution the web camera from Remote Panel.

Hello all
I want to control the WEB-camera from Remote Panel
I created the VI and I must to set the resolution of the WEB-camera (640*480 or 320*240).
But I couldn’t to set resolution from Remote Panel.
What do I do?
Best regards
Iskander
Attachments:
USB_camera.png ‏15 KB

Dear John H.
Thanks for the answer
I created the VI to observe the image from WEB-camera
When I run the VI, I must to set the resolution the WEB-camera.
When I run the VI on the host computer , I can do this.
But when I run the VI on Remote Panel, I can’t adjust the resolution of the WEB-camera from Remote Panel and the VI are stopped
What can I do?
With respect
Iskander
Attachments:
image.png ‏237 KB

I NEED A DOWN LOAD WEB CAM FOR MY 520TOUCH SMART PLEASE.

520 TOUCH SMART WEB CAM DOWNLOAD

Best thing to do it to install Firefox Portable 3.6.19 to your hard drive and use that for the FAFSA website and use 5.0.1 everywhere else. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Pavilion dv2911 Web cam

How/where do you turn on the web cam for the Pavilion dv2911?. We're using IE and Vista. We've had this lap top since 2008 and still haven't figured it out. It has come on sporadically a couple times, but we don't have a clue how it happened. Thank you.
This question was solved.
View Solution.

in theory by default the webcam should be off by default and only activate when you use applicable software to use the webcam like skype or youcam. Try loading those programs to see if you can use the webcam, if you cannot then it could be a driver or hardware issue
Signature:
I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct.

Win7 64bit Drivers needed for pavilion touch laptop

Hi
I have just bought a HP pavilion touchsmart 14-n056ea that came with windows 8. I am using it for work and they have given me a windows 7 pro 64bit OS to use instead as it works better with their systems. i have formatted the drive and installed the win7 OS now but the drivers online are only for windows 8. Can anyone please help me to source some windows 7 drivers. Below are the hardware id's for the ones that are popping up in yellow in the device manager.
ethernet controller
PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C&REV_08
PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
network controller
PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C&REV_01
PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C
PCI\VEN_10EC&DEV_8179&CC_028000
PCI\VEN_10EC&DEV_8179&CC_0280
pci communications controller
PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C&REV_04
PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C
PCI\VEN_8086&DEV_9C3A&CC_078000
PCI\VEN_8086&DEV_9C3A&CC_0780
sm bus controller
PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C&REV_04
PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C
PCI\VEN_8086&DEV_9C22&CC_0C0500
PCI\VEN_8086&DEV_9C22&CC_0C05
usb controller
PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C&REV_04
PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C
PCI\VEN_8086&DEV_9C31&CC_0C0330
PCI\VEN_8086&DEV_9C31&CC_0C03
unkown
ACPI\HPQ6007
*HPQ6007
graphics controller
PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C&REV_0B
PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C
PCI\VEN_8086&DEV_0A16&CC_030000
PCI\VEN_8086&DEV_0A16&CC_0300
i need a driver for audio too but windows is using its own one which seems to be working but would prefer the correct one.
many thanks in advance guys.
This question was solved.
View Solution.

Hi:
You can use all of the W7 x64 drivers and software from this model, except the audio.
DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
Audio: Install third and reboot. Accept the agreement, download and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
To save you time wondering what drivers you need for the ID's you posted, here they are...
sm bus controller. Install first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&dlc=en&lc=en...
graphics controller: Install second and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128860-1&cc=us&dlc=en&lc=en...
ethernet controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&dlc=en&lc=en...
network controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128935-1&cc=us&dlc=en&lc=en...
pci communications controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127794-1&cc=us&dlc=en&lc=en...
usb controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&dlc=en&lc=en...
unknown:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&dlc=en&lc=en...

Hardware/Software needed for WebForms?

My company is planning on migrating a Forms 3.0 application to
WebForms (we need to support both Win95/98 PCs and Macintoshes).
I understand the basic 3-tier structure (i.e. database server,
application server and browser based client), but I'm still
unsure of what hardware and software is actually needed for the
application server (especially since Oracle keeps changing the
names of their products). Can anyone tell me what the hardware
and software requirements are for a WebForms (w/reports)
application server assuming that I don't have anything yet (NT
or Unix)? Also, what are the general memory/disk requirements if
the server needs to support about 100 concurrent connections?
Thanks,
Douglas Scott
null

John Funk (guest) wrote:
: Frank Huether (guest) wrote:
: : Douglas Scott (guest) wrote:
: : : My company is planning on migrating a Forms 3.0
application
: to
: : : WebForms (we need to support both Win95/98 PCs and
: : Macintoshes).
: : : I understand the basic 3-tier structure (i.e. database
: : server,
: : : application server and browser based client), but I'm
still
: : : unsure of what hardware and software is actually needed
for
: : the
: : : application server (especially since Oracle keeps changing
: the
: : : names of their products). Can anyone tell me what the
: : hardware
: : : and software requirements are for a WebForms (w/reports)
: : : application server assuming that I don't have anything yet
: (NT
: : : or Unix)? Also, what are the general memory/disk
: requirements
: : if
: : : the server needs to support about 100 concurrent
: connections?
: : : Thanks,
: : : Douglas Scott
: : From my (low) memory.
: : Reserve 128 MB for OS and Web Server (NT).
: : For every connection guess about 10 Meg each and remember
: : running Reports out of Forms means another connection for
: : Reports. So 100 Forms users running reports are 100 more
: : connections.
: : Good idea would be to have load balanced servers.
: : If you are deeply interested I can dig somewhere for the
: : documentation.
: : Frank
: Frank,
: I am in a similar situation as Douglas. But I am not sure
: WebForms can handle a 250+ forms application. Are you aware of
: anyone running an application that big using WebForms (any
: version)?
: Thanks,
: John
John,
there is an Oracle marketing slogan about the Norwegian tax
ministery (or so) running with about 5000 users concurrently.
But they are only dealing with the number not further details.
I'm just pushing a customer with a +- 100 form app to the web
and they want ot go production in mid February. They (especially
their admins) are very open to the technology and there are only
some issues on prinitng from forms using customs documents,
invoices and delivery notes. But I think after some changing of
the print philosphy it will be working.
If you are interested mail me and I will try to give you some
hints after production.
Frank
null

Support for HD (1280x720px) web-cams

Does JMF 2.1.1e support HD format (e.g. 1280x720 px, 30 FPS) web-cams?
After a recent purchase of a Netbook with web-cam, I finally got around to playing about with using JMF to access the inbuilt cam and grab sequences of frames (for time-lapse animations). Unfortunately the inbuilt camera is 640x480 and of otherwise low quality (as you might expect of a camera supplied as standard in a Netbook). Am considering buying a HD web-cam, but need to assure myself I am not spending $70+ for a camera that is not compatible with JMF.
Did a quick search of the forum for '720' and got 5 hits that were not relevant.
Side note: Checked the Netbook could take 4 hours worth of frames every 2 seconds and store them (into a Zip archive) at 640x480 using the internal camera on battery. It still had 31% charge left. It will be interesting to see how storing the images performs in terms of charge, using an USB based HD camera. ;)

AndrewThompson64 wrote:
captfoss wrote:
Andrew, if you don't mind learning something new, I think your best bet would be Adobe Flex. It's free and it's got excellent support for web cams... I'd take a look at some ActionScript code and see if it's something you think you could pick up fairly easily.Might be the way to go. ..That is probably a cleaner approach, but in the end I settled for a hack.
- A simple Java app. that will click a point on screen repeatedly using Robot.
- VLC media player connecting to the web cam and offering a snapshot button to click.
Connected to the new 'Fission'(1) webcam, I get 1600x1200 snapshots in .png format that I can further utilize to create either 1600x1200 4:3 ratio animations, or by cropping a little of the top & bottom and down-sizing, a 720p 16:9 ratio animation. I'd probably do the latter using JAI from an Ant task.
A test last night suggested it could only grab an image around once every 4 seconds. I set it for every 2 seconds over two hours, and while I expected 3600 images, I ended up with just 1836. Given the still camera could only manage one shot every 9 seconds or so, this still allows me to keep the same basic rate of progress of the animation at double the FPS (15->30) that I was seeking. The only other concern is the total length of animation obtainable via. a single battery pack. The 2 hour run took battery from 100% to 41%, but I am hoping I can stretch it to (at least) a 4 hour shoot using a 4 second delay.
1) I had never heard of the Fission brand before I saw it. I got it from Aldi(2) for $25 Aus. It supports a phenomenal range of formats, some astonishingly high.
2) Not sure if Aldi operates in your neck of the woods. They are a German based group that supplies groceries real cheap, and offer whatever other little nick-knacks that are also cheap.

Any other choices for communication with web cam

Hi all,
I have wrote a JMF program that takes the images from webcam. However, it really depends on lighting. When lighting is not enough, my whole application hangs. In fact, I have installed the software provided together with my webcam, it works pretty good nomatter how dark it is. Therefore, I really hope you guys can share some experiences to me, or are there any choices, such as, C, C++, etc, that allows me to capture the images from webcam continously. I am tired about java JMF. Thx a lot.

To communicate with web cam, you can avoid JMF using the JavaTwain package http://www.gnome.sk
This package enables you to connect to your camera or scanner directly from a java application.
If you just want to see how Java Twain works with your scanner or camera:
- java (1.2 or higher for Windows, 1.3 or higher for Mac OS X) has to be installed on your computer
- a scanner or camera has to be installed on your computer
- download the trial package from http://www.gnome.sk
- unzipp it
- go to the examples directory of the unzipped package
- in Windows: doubleclick the runExampleShow.bat
- in MacOS:
- open the Terminal window
- change the working directory to the examples
- run .sh file (type ExampleShow.sh or sh ExampleShow.sh)
This will pop up the Twain Source Selection user interface. There, all your scanners and cameras which do have a twain driver should be listed. (About 90% of scanners and cameras on the market do have a twain driver for Windows, only a few do have a twain driver for MacOS.) Select one of them. The user interface of the selected scanner (camera) will appear. Confirm the scanning (you can set the scanning parameters first). The scanned image will be displayed in a separate window. To end the application, close that window.
Running different examples, you can test scanning with hidden UI, saving the scanned image, using ADF, ...
If there is any problem, do not hesitate to inquire about it at the technical support, email: [email protected] . I am the member of the staff :)
Erika Kupkova

What settings do I need for high quality web video?

I've created a video via animoto.com for my website. The video resolution they recommend for web is 432 x 240 @ 15 fps. I used this and it's not as crystal clear as I'd like. Still looks pixelated a bit and I'd like a higher def version. So I downloaded the hi res version (864 x 480 @ 24 fps). This looks great but takes forever to load due to buffering. Then the video stops every few seconds. I understand this res is not meant for web.
What is the resolution I need for best quality & fast loading? I've seen great videos on the web before that loaded very quickly. This is what I'm looking for. I have Quicktime Pro for Mac and can pretty much save in any formats & resolutions. So what's recommended?
Thanks!

Hi
There are some important things.
• Set down burn speed to x1. In iDVD08 You can do this in preferences.
• Use high quality media. I only use Verbatim
• Use right type of DVDs. I only use DVD-R (Single Layer)
• Best quality - I use Pro-encoding Quality.
• IMPORTANT: Secure a minimum of 25Gb free space on Your internal (start-up) hard disk
• Use a CD/DVD cleaning disk from time to time
• Don't burn more than three DVD at a time then let Your DVD-burner rest in 15 minutes to cool down.
Good Luck
Yours Bengt W

MSI TV@Anywhere PLUS remote control shut down problem

Hi!
I have a MSI TV@Anywhere PLUS card working fine. I use the remote control without problem. Except that, when i want to shut down my PC with it. I push "POWER", the app closes, and after that i push "RESET" and I get this: "Press "Power" to shut down your computer, or any other key to cancel" . But whatever I try to push on the remote, nothing happens...but by the mouse, the OK or Cancel buttons work.
Can somebody help , what is going on?
thanks much!

Hi All,
I solved my problem with some trying, this msi remote is really funny....
Okey, so It appears that, when the above mentioned "shut down or cancel" window comes up pushing the "RESET" on my remote, the remote app. stops receiving commands/stops working. If i close this window, I am able to use again my remote controller. phhhh....
All right, lets use the built-in mouse/pointer controller to click (5) on OK in the window, when it is asking for shut down... NOT working either, because as i mentioned above, when the window appears, the remote stops working... jejeje :D
So, I made a shutdown.exe command icon on the desktop, and I can click on it with my remote...solved...
(the remote controller cannot navigate the cursor above the windows taskbar i do not no why..., besides this, it is ridiculous how difficult to move the cursor with he controller, pushing like crazy :D )

Sony camera Smart RemoteControlsony camera smart remote control installation

I am trying to install the Smart Remote Control app on my iPhone for use with a6000. I install the PlayMemories parent app on my iMac (running Mavericks) but that parent app does not show up in Applications? ??? Any help in getting the latter installed or the former would be appreciated

I never heard of such a device but there's a bunch of stuff in Google:
"Results 1 - 10 of about 611,000 for "long distance remote control."
Your best bet would probably be a telephone, with the person at the other end in the same room as the camera.

Software needed for Pavilion dv2201ca web cam plus remote control function

Similar Messages

Maybe you are looking for