Software not on the server

I am trying to download the latest version of Ipod Updater for my shuffle and it takes me to the download page, but at the bottom it says "The requested application was not found on this server". I have found no other location to find it. The site I went to was http://www.apple.com/ipod/download/
Any alternatives?

Along the top of this webpage click on Downloads -- this will take you to a page where you'll find the Updater you're looking for in a box at the right side. A warning, though, Updater 2006-01-10 contains nothing new for the Shuffle -- only for the other iPods AND any Updater after 2005-09-23 seems to screw up the operation of many Shuffles as evinced by the numerous entries in this discussion forum. My credo is: "if it ain't broke don't update it."
Roger

Similar Messages

Want to delete mails from Thunderbird but not from the server?

Hi,
Please tell me how to configure the settings of Thunderbird so that if i delete any mail from Thunderbird that mail would be delete only from Thunderbird not from server. I'm using IMAP configuration for all my mail accounts and I'm using Thunderbird in my laptop and tablet both.
Currently i'm using Thunderbird 24.4.0 and i just want to delete my useless mails from Thunderbird but not from the server without using pop-3 settings.
Actually the reason for this Question arises because whenever i use to uninstall and reinstatement Thunderbird, i use to take "profiles" as a back up and its size is increasing day by day that is making a big issue to me as i cant take a back up of such a big size file.

Imap mail accounts keep the emails on the server and you see a remote view of those emails and folders.
When you subscribe to see a folder, the headers are downloaded, when you select an email to read, the entire folder is downloaded to a temp cache facilitating quicker access. If you synchronize folders, then a copy of that folder is downloaded to an mbox file in your profile, so that you have a copy of the server folder. When you make any changes to a synchronized folder, read an email, delete or move etc, then Thunderbird will resynchronize with the server to update the server. A synchronized folder allows you to work in 'offline' mode and this is the best time to perform a backup as you know there is a temporary stop on synchronizing as you are offline. They will resynchronize when you go back into 'online' mode.
So, with IMAP mail accounts, the folders you see in Thunderbird are the same folders on the webmail server. If you make any changes via Thunderbird or webmail then you are changing the same folder. You cannot delete an email without deleting it from the server, they are one and the same.
What you can do is move/copy an email into Local Folders and delete the one on the server. The Local Folders emails are kept in your Profile on your computer, these folders/emails are not on the server, unless you chose to keep a copy of them on the server.
Pop mail accounts cannot see the folders on the server. They only access the server Inbox folder and download emails not previously downloaded to the mail account Inbox in Thunderbird. These emails are kept on your computer in your profile folder. You can select to keep a copy on the server or not. You can choose to delete emails off your computer and off the server or not.
If the mail account is gmail , have you subscribed or even synchronized to see the 'All Mail' folder ? Gmail's all Mail folder is their Archive folder, it keeps a copy of all of your non-deleted emails. So, you do not need to subscribe to see this folder as it only shows you what you can already see in other folders. It doubles the disc space.
Please read section on 'All Mail' at this link.
* http://kb.mozillazine.org/Using_Gmail_with_Thunderbird_and_Mozilla_Suite
You do not have to download/synchronize the entire folder. You could select to only synchronize the most recent xx days of emails.
see info here:
* https://support.mozilla.org/en-US/kb/imap-synchronization#w_configuring-synchronization-and-disk-space-usage

Not getting the server pool in the list of server pool

We are facing following issue. Can you please help on this. Or how can we get help on this. I would be thankful for this.
We have created a server pool which consists of two vm servers. Two vm servers we created manually.
We are using following steps to create third virtual server.
1. Click "next" on "create virtual machine" screen.
2. Click "next" on "installation media" screen
3. It asks to select a server pool from the list but we are not getting the server pool in the list of server pool which we created earlier.
We did this exercise before and we got the server pool name in the list which allowed us to create virtual machine. Now when we reinstalled the vm servers machine and also vm manager, we are not able to do this once again.

Hi,
please check the status in Server Pools ( it need to be in Active). then check in the Servers the status need to be in active in VM Manager.

Httpd: Could not determine the server's fully qualified domain name, using

Hello, I am checking why the response time of the display of the pages of the sites are slow, then I checked the error_log file in /var/log/httpd and I got this texts: (I am hosting 3 sites in the server)
[Mon May 14 21:21:37 2007] [alert] httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
Processing config directory: /etc/httpd/sites/*.conf
Processing config file: /etc/httpd/sites/000010.129.0.37_80avepublishing.com.conf
Processing config file: /etc/httpd/sites/000110.129.0.37_80escuelamovil.com.conf
Processing config file: /etc/httpd/sites/000210.129.0.37_80sabiduria.com.mx.conf
Processing config file: /etc/httpd/sites/0003any_80default.conf
Processing config file: /etc/httpd/sites/virtualhostglobal.conf
[Mon May 14 21:21:37 2007] [alert] httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
[Mon May 14 21:21:38 2007] [notice] Apache/1.3.33 (Darwin) mod_jk/1.2.6 DAV/1.0.3 mod_ssl/2.8.24 OpenSSL/0.9.7l PHP/4.4.4 configured -- resuming normal operations
[Mon May 14 21:21:38 2007] [notice] Accept mutex: flock (Default: flock)
[Mon May 14 22:12:18 2007] [error] [client 10.129.0.37] File does not exist: /Library/WebServer/Documentsescuelamovil/robots.txt
[Mon May 14 22:12:18 2007] [error] [client 10.129.0.37] File does not exist: /Library/WebServer/Documentsescuelamovil/error.html
with the alert:
[Mon May 14 21:21:37 2007] [alert] httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
the virtual host file (virtualhostglobal.conf) is:
# This file is auto-generated by the Server Admin Web
# backend plugin whenever settings are saved.
# The Listen and NameVirtualHost directives are generated
# based on the VirtualHost directive inside
# each site configuration file found in this directory.
# Please add appropriate Listen and NameVirtualHost directives
# if a site is manually edited
# i.e. the site is moved from sites to sites_disabled (or vice versa)
# or the site's Virtual Host ip address and/or port is modified
# Last updated at 2007-05-07 14:22:34 -0500
Listen 10.129.0.37:16080
NameVirtualHost 10.129.0.37:16080
Listen *:16080
NameVirtualHost *:16080
how can I correct this alert?
thanks
Dual 2 GHz PowerPC G5 Mac OS X (10.4.9) 4GB DDR SDRAM, MAC OS X Server
Dual 2 GHz PowerPC G5 Mac OS X (10.4.9) 4GB DDR SDRAM, MAC OS X Server

>how can I correct this alert?
Fix your DNS.
This non-fatal error is Apache's way of telling you that it can't work out the hostname of the machine it's running on.
It uses reverse DNS to determine this information. If you don't have a reverse DNS entry for your server's IP address, this is what you get.
Fix your DNS and the alert will go away, or just ignore it.

"Reader could not contact the server to complete the request" error

While trying to tranfer a document into pdf format I have suddenly received the above error - "Reader could not contact the server to complete the request" I have already transfered three or four documents today, but now am suddenly receiving this error. I have tried rebooting my server to check for issues on my end but it is fine. Any suggestions? Thanks.

Hi there,
Here are some suggestions you can try:
a) Ensure your internet connection is available and try again.
b) If you are using an older version of Reader, try installing the latest (Reader XI) and try again.
c) Log into the web app (createpdf.acrobat.com) and click on Convert to PDF on the right hand pane and try converting to PDF from there.
Laura.

JCO.SERVER could not find the server function

Hi,
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
Please clarify.
Thanks,
Srinivasa

Thanks for the reply,
Yes RFC is in the Sender side.
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST(XI system name)
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST(XI system name)
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
These is what I gave,

Slow-Start Up and "can not find the server" dialog box

hi there -
2 year old Ibook G4. When I try to open either Safari or Netscape the "can not find the server" box pops up.. I have a solid connection wi-fi for the wireless signal is on full strength. I have cleared my cache. Also I am experiencing start-ups that are taking 2-3 minutes. The color wheel just keeps spinning.Also, I have done repair and I renewed the DHCD. Not sure what else to do?

as a guess, spinning wheel could be caused by failing hard drive.
often failing hard drives will pass all tests by the utilities.
you may want to back up any important files just in case.
if the iBook boots up from the OS install CD/DVD with no problems, issues could be caused by the corrupted files on the hard drive or failing drive.

Safari is not able to open this page because it can not find the server.

I too need help with this problem with my Ipod touch. Currently, I am in the Ukraine, go to a wifi cafe, access the wifi and get a clear powerful signal. Then I try to load the Google page, any page from my bookmark or write the web address in and I receive the same message; "Safari can not open this page because it can not find the server." Something is wrong with my settings and I tried to reset the options but it does not work. Can anyone help me with this problem? Thanks!!

Hello and Welcome to Apple Discussions.
The 169.254.xxx.xxx address indicates that there is a problem with DHCP server in your BT Digital Hub (Home hub?) because the iPod is taking a default IP rather than been given a suitable one. At the moment the iPod is not even in the same subnet as the router so it's no wonder that Safari can't find the Internet.
Ensure that the DHCP server is on and that you have an IP-address pool sufficiently large to serve all the devices you have. I'd expect it to be 192.168.1.1 to 192.168.1.253. If you have FON enabled you certainly need that wider range as other people may be using your router too.
mrtotes

Has anyone had this problem with VPN iPad vpn connection could not validate the server certificate

Has anyone had this problem with IPad 3 after upgrade to IOS 7,
trying to to connect VPN , but I get this messag, "could not validate the server certificate".
I am trying to connect to Oracle VPN.

Has anyone found a solution for this yet? I am still getting the could not validate server certificate error. I have tried importing the entire certificate chain as well as importing each individual cert in the chain. My certificate works perfectly with the cisco vpn on my pc.
This is my first experience owning an apple product, and I am very disappointed with the customer support that I have received. I tried calling the help line and no one would even attempt to answer my question. I was then told that the Mac "geniuses" wouldn't know either and that I may be able to find an answer on the message boards. So I am reaching out to the community...Has anyone been able to figure out how to resolve this issue or even the specific cause? Any help is appreciated.

Reader could not contact the server to complete the request........how to fix this?

New to Adobe..........trying to convert a .doc file to .pdf............but all I get is, "Reader could not contact the server to complete the request."
Ideas?

I believe I figured how.to do it.
Sent from my iPhone

Windows could not start the Server service on local computer Error 193:0xc1

Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
Jose

Hi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Can not shutdown the server 206

Hello,
On adf & non-adf servers I am getting following error with opmn command
/apps/std/1022/opmn/bin/opmnctl stopall
opmnctl: stopping opmn and all managed processes...
opmnctl: graceful stop of processes failed, trying forceful shutdown...
Can not shutdown the server 206
This happens more often than I like, and wondering what may be the cause?
This especially happens after I undeploy or deploy application.
Thanks
s

s,
For OC4J we use the admin.jar:
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28950/startstop.htm-Michael

When I try to access the App Store the app crashes. Recently I got a message that said my 4th generation iPod could not verify the server. What should I do?

The message said that my iPod could not verify the server and said accept,details, and cancel. I chose cancel and now I can get on to the App Store and many of my apps that require the Internet. This message has came up many times. What should I do? Thanks in advance.

Settings -> Store --> AppleID

Opmn 'Can not shutdown the server 206'

Hello,
On adf & non-adf servers I am getting following error with opmn command
/apps/std/1022/opmn/bin/opmnctl stopall
opmnctl: stopping opmn and all managed processes...
opmnctl: graceful stop of processes failed, trying forceful shutdown...
Can not shutdown the server 206
This happens more often than I like, and wondering what may be the cause?
This especially happens after I undeploy or deploy application.
Thanks
s

Thanks shail,
I didn't see any useful error in opmn.log or ipm.log
didn't see any error in log/states/* either
Currently my script ignores the shutdown errors and call startall
However I see following errors (shutdown appears to be ok) in opmn/logs/OC4J~spfstd~default_island~1 log file
09/04/20 12:01:24 Stop process
09/04/20 12:01:27 Shutting down...
09/04/20 12:01:27 JAM Agent: jaminit.destroy()
09/04/20 12:01:27 JAM Agent: jamagent.destroyJam() called
JAM Agent: Shutdown signal received, shutting down
09/04/20 12:01:27 JAM Agent: Shutdown complete
09/04/20 12:03:37 Start process
09/04/20 12:03:58 log4j:ERROR setFile(null,true) call failed.
09/04/20 12:03:58 java.io.FileNotFoundException: /logs/idp/idp.log (No such file or directory)
09/04/20 12:03:58 at java.io.FileOutputStream.openAppend(Native Method)
09/04/20 12:03:58 at java.io.FileOutputStream.<init>(FileOutputStream.java:177)
09/04/20 12:03:58 at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
09/04/20 12:03:58 at org.apache.log4j.FileAppender.setFile(FileAppender.java:272)
09/04/20 12:03:58 at org.apache.log4j.RollingFileAppender.setFile(RollingFileAppender.java:156)
09/04/20 12:03:58 at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:151)
09/04/20 12:03:58 at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:247)
09/04/20 12:03:58 at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:123)
09/04/20 12:03:58 at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:87)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:645)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:603)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.parseCatsAndRenderers(PropertyConfigurator.java:524)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:408)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:432)
09/04/20 12:03:58 at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConverter.java:460)
09/04/20 12:03:58 at org.apache.log4j.LogManager.<clinit>(LogManager.java:113)

Weblogic - 10.4.5 404 Not Found - The server has not found anything matchin

if you create a new web project in the WSAD IDE and then add a new JSP file it puts it in the web content directory. is this the default directory that will be searched for JSPs? the web.xml file has <welcome-file> entries for index.jsp but when i type
'http://localhost:7001/Test/'
at the browser i get the error message..
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI........
could you tell me what the possible causes of this error are

Make sure that u have deployed ur Test application in the weblogic server and not in the WSAD server...
regards
shanu

Software not on the server

Similar Messages

Maybe you are looking for