Software not talking...

Just a little heads up for those that use the W540 as a real Workstation with the newer "State of the Art" software that sees designed for dumb terminals.
Adobe Acrobat works great, and communicates to the user what is happening while doing housekeeping.
Unfortunately, Adobe has gone CC, and into the cloud. There are serious cloud issues too long to address here. So I'm testing out ABBYY Transformer+ before going to their PDF FineReader. The New issues:
The new ABBYY interface does not tell the user when writing a file, deleting pages (particularly annoying when doing ^tag multiple pages to delete), the save icon or performed action barely shows a slight outline that something is happening often sowing nothing but a stalled/locked screen. The screen is ALWAYS locked, and if trying to perform another task within the application, it remains locked, and sometimes a [Not responding] sign appears and the user never knows when the next step can be done or if the buffer is clear.
This is not just a software issue, but really a hardware failure of not telling the user that the computer is busy performing a task. I'm working with 500meg to 800meg PDF files (color), so there are long lags where I know not what is happening and the program is either locked or crashed. This is NOT ACCEPTABLE from a Workstation AND as far as I can tell there are no workarounds.
There needs to be a dialog of the system to the user. I do not see in the specifications of the W540 replacement any mention of a HD light. Maybe a workaround? There are 4 wasted keys to the upper right... more than enough room for an LED to show activity and a hard WiFi disconnect. At least going back to a real trackpad/buttons is a move in the correct direction, but more needs to be done to. Software issues I can handle, hardware ?? ....

Hi Bauden
1. What is the power plan configured? If it's power saving, definitely performance would be slow. If you are running on AC and need performance, set the power plan to maximum performance.
2. You could try update your system driver with Lenovo System Update. Often, outdated driver may cause issues or less optimal experience.
3. Do you have any other ThinkPad running the same software, but run your application well?
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300 | Yoga Tablet 2 Pro
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet

Similar Messages

Photoshop & Bridge not talking

I have Windows 7 and a full membership to Cloud - all software.
For the past week, since the last update of Cloud Desktop, Photoshop requires licence validation every time I start my computer (which is taking a lot of time and shouldn't happen) and every once in a while when I use Bridge and ask to open a RAW image in Adobe Raw, it tells me I need to have a qualifying product to do so. Which I have - Photoshop.
It won't recognize Photoshop:
"Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature."
If I log into Cloud, it shows that I have Bridge and Photoshop as part of my downloads and they are up to date.
What is happening? Why is the software not talking to each other? What's with the constant license checking which is tedious and stops me from getting my work done?

This is a very old discussion but in short, each new camera has its own unique Raw code. Adobe offers free upgrades for ACR (Adobe Camera Raw needed to convert the Raw data to an actual image) several times a year but only for their latest version of Photoshop (in this case PS6 and PSCC)
Here is a list of camera's with compatible versions of ACR:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
And the versions of PS with the ACR versions so you can see the minimum required version you need to match your new camera:
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
For your 5D II this means at least ACR version 5.2 that comes with CS4
You can either use the free Adobe DNG converter to first convert your files to DNG and then handle them in CS2 but you can also try to upgrade and match the technology of the camera with your software.
Besides that, shooting Raw and batch process to tiff without first changes the settings of the Raw file to your custom wishes is sheer pointless. You don't profit from Raw unless you make the effort to first develop the files in ACR to your custom wishes (or use Canon Software that came with your camera which to my opinion is very clumsy and very very slow / unproductive) and then start batch process for further development in PS or whatever.

Graphic Software Not Optimised?

I'm heading off to college in a few days, and i am looking into buying an iMac for my multimedia and graphic design course. We will be using Microsoft Office, Adobe Photoshop CS, Adobe Illustrator CS, Adobe InDesign CS, Macromedia Dreamweaver, Macromedia Flash and Final Cut Pro. I've heard that because of the iMac's increased processor speed there is a problem with the software not being fast enough, has the software been updated yet? If not when is it expected to be updated?
Regards,
Jack Nichols

The software you are talking about was written to run on PowerPC processors. Macs now have Intel processors, rendering PowerPC code unusable. To get around this, Apple have included an application called Rosetta with Intel Macs. This translates PowerPC code into Intel code as it is used, meaning PowerPC apps can be run on Intel processors. However, this uses up a fair bit of processing power and RAM, hence the reason they run slower than native Intel applications.
Final Cut Studio is now a Universal application (meaning it runs on both PowerPC and Intel processors), but as far as I'm aware the other applications you mention are not Universal. I would imagine however, it is more a question of "when" the Universal versions will appear, as opposed to "if" they will.
If I had to hazard a guess, I'd say they'll all be Universal apps within the next year.

NIC card on HCL list, but it's not talking. Why?

Hi, I just finished installing Solaris 10 (11/06) onto my computer. The whole installation installed without errors. Afterwards, I went to the log files and saw that everything seems to have installed OK.
After rebooting, I logged in with the CDE environment. Everything appears normal. I editted my /etc/hosts file accordingly. I hooked up this new Solaris x86 system onto my network. The NIC card is not talking. I can't ping from this new Solaris x86 PC to another system on the existing, working network.
My NIC card is the D-Link DFE-530TX+
This card is on the approved hardward compatibility list.
I have installed Solaris x86 in the past on many PC's without running into this type of problem, until now. Anyone knows what could be causing this problem, or how to know that my NIC card is being recognized by the Solaris x86 system, and how I can make this thing work?
Do you think I need to install additional drivers to make this particular D-Link NIC card work? If so, how do I install it? Thanks in advance.

Is there a NIC that is widely being sold in stores now that will work without needing to install drivers? It would be much easier for me just to go out to the stores and pick up a new NIC.
I live in Silicon Valley, so I can go to stores like Fry's Electronics, Best Buy, MicroCenter, etc.
Also, I already tried using Intel PRO/100 S and the 3COM Etherlink 10/100 PCI (3C905C-TXM). I downloaded a software from SUN, made a bootable CD, and when it scanned my PC, it says that likely my hardware will be compatible with Solaris 10. Yet,
At the beginning of the installing, I see messages like:
Using RPC Bootparams for network configuraton information.
Attempting to configure interface elx10 (or ipbr0)
Skipped interface elx10 (or ipbr0)
Does this mean the NIC won't work?

Why does iTunes say "Disc burner or software not found"

When I try to burn a CD using my internal CD/DVD combo drive, I get a message that says "Disc burner or software not found". I just upgraded to iTunes 6.0.1. The local Mac store couldn't get iTunes in 2 G5s and a G4 Powerbook to recognize the disc buners either, and they just upgraded to 6.0.1 too. Is this a bug?? Anyone else having problems??
Greg
G4 400 Sawtooth / 5 years old Mac OS X (10.3.9) CD/DVD combo drive

Greg, did the "Patchburn" really work for you?
I had the same problem today. I have a smart playlist made up of: Kind>is>Protected AAC audio file. This smart play list allows me to keep track of music I've downloaded from the iTMS after inadvertently deleting the Purchased Music default playlist. Yes, I know a new “Purchased Music” playlist is created when you buy music again, but it doesn’t contain any of the songs you’ve already downloaded.
When I went to burn this playlist (several hundred songs) to multiple audio CD format - I go the same result you got.
"After asking to burn a play list it asks to insert CD, checks the media, checks the play list and then stops with the apple icon reappearing and NO error message."
Apple tech support couldn’t help me - I found that out the hard way - after 1.5 hours on the phone. No, I haven't exceeded the 7 time burn limit either.
I tried selecting all the songs in the smart playlist and creating a new [regular] playlist and tried to burn from that, but got the same result.
Finally, I tried typing "Protected AAC audio file" from my main library in the search window, selected all the songs that resulted, created a new [regular] playlist from that selection and the burn was successful.
It was a real pain and took almost 3 hours to figure out, but it worked. I'm going to try the "Patchburn" download talked about earlier, but don't know if that's the real problem.
Yes, I have upgraded my SuperDrive, but iTunes recognizes it - Preferences>Advanced>Burning - if your drive shows up here then that's not the problem. Besides, I had the same problem when trying to burn to the original SuperDrive too.
I think the problem may be deeper inside iTunes itself. Duh! Maybe something with Apple tightening their DRM scheme which may make us unwitting beta testers to see if they tightened the noose too tight or not. Just a guess.
Any thoughts, anyone?
Power Mac G4 MDD Mac OS X (10.4.3)

Keep getting Disc Burner or software not found when trying to burn a CD

I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

Hi daurel,
Thanks for participating in the Apple Support Communities.
It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps.
If the situation continues, be sure to try the tips in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
Sincerely,
Jeremy

When trying to burn a CD I get the message "Disc burner or software not found"

Itunes is not recognizing my CD burnner. I have no trouble importing music nor do I have any problems burning CDs outside of itunes. I have actually been having this problem for some time now. I kept hoping that it would be fixed in an update but alas the problem has persisted. Strangly I noticed in the diagnostic it says the the user in not an administrator which is odd since I am logined in as an Admin. Can anyone help? Here is my diagnostic:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L305D
iTunes 10.4.0.80
QuickTime 7.6.9
FairPlay 1.12.20
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 002CAAD00BAA7700
Current user is not an administrator.
The current local date and time is 2011-07-25 23:04:10.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon X1250
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.4.0.80 (x64) is currently running.
iTunesHelper 10.4.0.80 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off.

Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2

Multi scanner software not working after E71 FW U...

Multi scanner software not working after E71 FW Update to 3.1

Nice bit of trouble-shooting. Thanks for sharing the final solution.

Remote desktop client software not active

I'm sorry if this has been asked before but I'm a bit bewildered by this errormessage (and I couldn't get a hit when I searched for it) when I try to drag a file from the xserv to the macbook pro desktop, remote desktop client software not active.
The macbook has the ard server and connects to the xserv ppc. It connects over the internet.
The xserv is behind a iptables fw and I have forwarded 3283 tcp/udp plus 5900 udp/tcp to the server. Have I forgotten a port ?
I've read through http://www.starkpr.com/ard.htm as well as http://www.macosxhints.com/article.php?story=20070302234400232&query=vnc%2Bsimpl e%2Bset%2Bup
and tried to find out more from the discsussions here.
The macbook pro sits behind an airport which is hooked into the dsl modem. Do I need to configure port forward in the airport as well.
Connecting to the xserv and working on it works great but the copy file transfer fails.

Hi there I took new try at this and this is what finally solved it for me.
The earlier answer I got was very good advise but I had already done that bit, actually I might have overdone it a bit I had checked all the boxes under the useraccount on sharing.
Back to business.
Firewalling. I realised I need to open and portforward at both locations and remeber it's booth tcp and udp.
So at the xserve location I needed to forward 3283 and 5900 both tcp and udp from outside to the IPnumber of the xserve.
At home with my macbook I needed to do the same.
However this did not solve it, I had forgotten one software on the macbook. On the xserve I had installed ARD upgraded it to 3.1 AND installed the upgrade for ARD 3.1 client. The client part I had forgotten at home. So once my ARD and ARD client software matched I could connect to the xserve and drag and drop files booth ways.
ARD wasn't running on the xserve I just had it installed along with the client software.
So portforwarding in firewalls and the same software and versions in all locations seems to have solved it for me.
A small note enabling/disabling the firewall in macbookpro did nothing for me since when enabled ARD rules were in place and active so it still worked.
I hope I made some sense.
Message was edited by: tindome
Message was edited by: tindome

I can't burn a CD from my Mac. Says "discburner or software not found".

I can't burn a CD on my iMac. Done it a thousand times with no problems. Says "discburner or software not found". Ideas?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

Help please - iTunes disc burner or software not found... with full troubleshooting details

In iTunes 11.1.3.8 on my Windows 8 HP Laptop, when trying to "Burn Playlist to Disc", I get the Burn Settings window "E: hp DVD A DS8A9SH", then I select MP3 CD and click "Burn", I unfortunately get the dreaded iTunes "disc burner or software not found...". I think this is the second time this has happened (first time I think a simple reboot fixed it), and I assume because iTunes was updated this issue came back again and I cannot burn MP3 cds anymore because of it!
I've followed all steps outlined in this support article "iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install" (http://support.apple.com/kb/TS2308)
Solution 1, no updated firmware was available for dvd drive.
Solution 2, not relevant because those files were not present when I looked for them.
Solution 3, I'm familiar with regedit and did exactly what the step by step instructions told me including rebooting multiple times to completely remove Gear drivers/keys, installing the new Gear driver files with their official setup file "For 32-bit and 64-bit systems:" from http://www.gearsoftware.com/support/drivers.php (and gave another reboot just in case) and opened iTunes at the very end of the entire process.
Still getting the dreaded "disc burner or software not found..." error when trying to burn a playlist to a CD. The weird thing is when I click Burn playlist to a CD, I see the DVD drive "E: in the next prompt which asks for Data CD/MP3 CD, Audio CD.
So I clicked on Help > Run Diagnostics, selected "CD/DVD Drive tests" only and clicked "Next".
Window says "To begin the test, please insert a prerecorded audio cd..." so I did that and clicked "Next".
Under "Choose an optical drive to test:", the drop-down menu only shows "[Choose a Drive]", no other options. Under "Optical drive:" it says "No drive chosen for testing.", and I click the "Next" button.
Here are the diagnostics output I got:
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion g6 Notebook PC
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002AB1700B7C4780
Current user is not an administrator.
The current local date and time is 2014-01-20 18:23:52.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
I'm extremely confused as to what to do next. I was thinking I should try reinstalling iTunes but I'm not sure that would even work and I'm so paranoid about installing it correctly and referencing the right existing library files that I'd like to see other suggestions first.
Any help from the community or Apple would be tremendously appreciated and I would be glad to do more testing and provide more details. Thanks!

Hi there aaxim,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
-Griff W.

When I try to burn a cd, itunes says "disc burner or software not found"

after I upgraded my itunes, (I previously had 7 or 8) I had to uninstall it in order to upgrade to 10. Now I am not able to burn discs.
here is a copy of my diagnostics
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
TOSHIBA Satellite L305
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
VoiceOver Kit 1.4 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL Not Available
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0023AE1809B1BCC0
Current user is not an administrator.
The current local date and time is 2011-06-28 20:46:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: dc5f66d755b2d8ff8f7e9a2c9cc000fe
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: PIONEER DVD-RW DVRKD08L on CDR media at speed 20X.

Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

I am receiving the message "disc burner or software not found" when trying to burn a playlist to a blank disc.

I ran the diagnostics test and the program was unable to detect a prerecorded cd. This is a fairly new problem and I am not sure what to do.
The results to the diagnostics test are below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron 5520
iTunes 11.0.4.4
QuickTime 7.7.4
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0035BB400AFA2018
Current user is not an administrator.
The current local date and time is 2013-07-14 17:29:40.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is supported.
Core Media is not supported. (16002)
Video Display Information
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.

Hello queenabs,
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found." I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.

Itunes says "disc burner or software not found" when trying to burn a playlist

I ran diagnostics on my CD/DVD Drive and got this. This is all greek to me
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
HP-Pavilion GN561AA-ABA a6230n
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL Not Available
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 001CAD4403BE4F90
Current user is not an administrator.
The current local date and time is 2012-05-22 08:54:12.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 6150SE nForce 430
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: HL-DT-ST DVD-RW GSA-H60L on CDR media at speed 40X.

Refer to following articles:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
iTunes for Windows: Troubleshooting CD issues caused by device filters
http://support.apple.com/kb/TS2372?viewlocale=en_US
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

I get "disc burner or software not found" when I try to burn a playlist.

I am now getting "disc burner or software not found" when I try to burn a playlist from iTunes version 10.6.1.7 on Windows 7 PC. I've not added any new burner software or made any software changes of any kind. I have NERO 8 and I checked the "burn rights" is set for "everyone".
Is the any solution?
NASA_1967

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Software not talking...

Similar Messages

Maybe you are looking for