Software Part Number..

Hi everyone,
can you help me generate the part number for this software? i know it should be a software/license, please what is the product/part number?
The description is given below:
CENTRAL CALL CONTROL SOFTWARE
The Central Call Control Software extends enterprise telephony
features and function to packet telephony network devices, VOIP
gateways and multimedia applications. It shall have the necessary
License(s) needed for the operation and maintenance of the software.
It shall have the following functions (but not limited to)
- Call Processing; Signalling and Device Control; Dial Plan
Administration; Phone Feature Administration; Directory Services;
Programming Interface to External Application; Backup and Restore
Trools; Cisco Unified Communicatioins Manager 7.0 or later Version
Thanks
samson

You can download the files at:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66973
The part numbers are different from yours, but give it a try.
If that doesn't work. You can use imgburn at http://www.imgburn.com/ to create a CD image on your hard disk, then use
Virtual Clone Drive http://www.slysoft.com/en/virtual-clonedrive.html to load the image. Your computer will treat as a CD drive and lets you run the software on the virtual drive.

Similar Messages

How do you register iLife software that came preloaded on an iMac (I cannot seem to locate the Marketing Part Number) on the DVD?

I just purchased an iMac with iLife and iWork preloaded.
I wanted to register the software, but I cannot seem to locate the Marketing Part Number (MPN). Help states the MPN is located on the product packaging near the barcode. I can locate the barcode on the sleeve of the disc, but the MPN does not seem to be there. Help states it starts with a letter and has the format M#####/#. I have tried to enter each set of numbers shown, but all are invalid.

You registered it when you registered the computer. Apple software bundled with a Mac can't be registered separately from it; that service is for standalone purchases only.
(58748)

SMARTnet 8x5xNBD part number for ASA5510-SEC-BUN-K9

Dears,
I am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco ASA5510-SEC-BUN-K9.
I browse cisco website, tried dynamic config tool, forums etc but no luck.
1: Please let me know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM
BR,
ABDUL MAJID KHAN

Yes there is. You can use Cisco Commerce Workspace which is a classical tool from Cisco. Cisco Commerce workspace provides one integrated commerce experience that allows cisco partners to register deals, configure and price products, software and related services, and submit orders from a single Workspace.

Need Urgent Help! Forms Developer CD Part number???

question 1:
I want to know then Software Product CD Part number, Part # ?????
for purchase.
Product name:
Oracle Forms Developer/Services 6i Release 2 for Sun SPARC Solaris
Release 2 , not Release 1!!
thank you !
question 2:
higher patchset includes lower patchset ???
for example: Forms Developer Patch 5a includes Patch 4a ???
if no, what's relationship between Patch 5a and Patch 4a ???
Thanks!!!

But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
What version of BIOS should I use?? Any recommendation ??
Thanks.

Adobe CS4 upgrade part number

I have an upgrade version of CS4 that I got sent when it came out and never used. Someone else wants it, but the part number (PN) is causing confusion. Does anyone know where I can find out more about the part number, and the compatibility of this software as I can't find any reference to it either. It's a Design Standard upgrade from CS3 to CS4.
Thanks!

I think the best bet here is to contact Adobe, as they would know what needs to be done in this particular case.
Cheers
Hisham

IVR Windows 2003 part number

Does anybody know the part number for Cisco Unified Communications Operating System to support IP-IVR 7?
This is an OEM Windows 2003 build for an HP DL380 G6 server, so needs to be version 1.5 of the operating system release. I'm struggling to find the exact part number that I should order to get a bootable 1.5 OS ready for an IP-IVR (UCCX) build
Thanks
Jed

The Cisco OS 2003 part number is 2003.1.2 or 2003.1.1; however, what version of CRS are you looking for? Please remember that software should be requested through PUT; go ahead and enter your Software contract under PUT, it should be listed there:
PUT tool (http://tools.cisco.com/gct/Upgrade/jsp/index.jsp)
Hope it helps!!!

How to find hardware part number

Is there a way to use software ("about this mac") or by looking on the case to see what the part number is for a Power Mac G5? I searched the Apple support site and these discussions and could find no information on locating the part number of a CPU.
This is needed because there are some issues of compatibility with an audio board and the refer to specific part numbers for different Mac CPUs. Of course, this problem comes about, because unlike most product makers, Apple doesn't label many of their products in a meaningful way - at least since the days of the Performa 650 or Mac IIsi when you could look at the case and know what model you had. Even the silly convention of referring to models as "bronze keyboard", "ATP graphics", "silver doors" or gigabit ethernet" was better than no indication at all.
So any help would be appreciated if you happen to know. Thanks.
G5 dual 1.8 .. probably "late 2004" Mac OS X (10.4.3)

Don't know about the part no. of the CPU, but the 'M' no. should be on the original invoice.
The serial no. will give you the build date
"The first two characters indicate the city where it was manufactured, the third number is the 200x year, and the fourth and fifth numbers combine to indicate the week of the year.
So, g8443a19qpp would be made in city "g8", year of manufacture = 2004, week of the year 2004 = 43."
[from Macintouch]
Knowing the build date you can see the likely specs. here
http://www.everymac.com/systems/apple/powermac_g5/index.html

HT1219 Is there any way to match an alphanumeric part # to a numerical part number?

Is there any way to match an the part # listed in the article for a drive module (ie MB837G/A) to a numerical part number (ie 607-1661)?
Thanks!

Not really. Other software would have to be installed on the device to locate it. That's what Find My iPhone is for (and it's free).
File a report with your local police.

How can i find marketing part number?

how can i find marketing part number?

The marketing part number for the single-user package is MA790Z/A, for the family pack it is MA791Z/A. The only way I've ever been able to find the marketing part number online is to add the item to my cart then edit the cart where it will then show the number & I can remove the item. This is how I just found the single-user number for you. The family pack number is from my Apple Store invoice.I never even think to use the registration web page for Apple software, I just assume when I put in the serial number & it says my registration was sent to Apple, that's it. And I've been using iWork '08 on the family pack license since I got it around August 11 without any further registration.
<Link Edited by Host>

Numbers09 marketing part number

I recently purchased an iMac and got iWork 09 at the same time. I sent in the bar sticker with the marketing number on it before i registered the software. When i open Numbers it want the part number. Any ideas?

Rick Klausman wrote:
I recently purchased an iMac and got iWork 09 at the same time.
As you "purchased" the iMac and "got" iWork 09, I assume that what you got is only the trial version.
If I am right you must buy a registration code.
If you bought the iWork 09 package, there is no need for a registration code.
Yvan KOENIG (from FRANCE jeudi 2 avril 2009 12:03:57)

Marketing Parts Number?

A few months ago I purchased Logic Pro 7.2 with the intent to use it on a project I was starting. For various reasons I ended up using my old software, a different program. Now, I'd like to start using Logic. When I tried to register the program I was asked for my Marketing Parts Number, which they say is on the outside of the packaging, near the barcode. I cannot find any such thing on the box. If they mean the label that was on the original shrinkwrap, that was discarded months ago. I still have everything else in the original package and, of course, my key. I can prove I purchased it if that's necessary.
How can I register my software?
G5 Mac OS X (10.4.6)
G5 Mac OS X (10.4.6)

THE MARKETING/PART NUMBER, WILL BE ON THE SIDE OF THE PACKAGE THAT LOGIC/PRO CAME IN, THE BLACK-BOX I WOULD CALLED IT, SOME-WHERE ON THE SIDE, A WHITE-STICKER, STARTING WITH THE LETTER M/ FOLLOWED BY A FEW NUMBERS.
THATS THE ONE, HAVE FUN AND WELCOME!!

What does full name on Part number?

Dear all,
Does any one know the full name of part number as below?
1- WS-C3650-48FS
what is full name WS, FS?
2- WS-C3650-48TQ
what is full name TQ?
3- WS-C2960X-48FPD-L
what is full name X , FPD-L
do you have link to show on this ?
Best Regards,
Rechard

There is not a publicly published complete and explicit definition of the letters Cisco uses in their product nomenclature. the best one can do is look at either the product data sheet or Cisco Commerce Workspace (partner / reseller only) and see what the product description is.
For instance, WS-C3650FS (-E or -L) is "Cisco Catalyst 3650 48 Port Full PoE 4x1G Uplink IP Services" (with Enhanced or Lanbase license), WS-C3650-48TQ is "Cisco Catalyst 3650 48 Port Data 4x10G Uplink IP Services" and WS-C2960X-48FPD-L is "Catalyst 2960-X 48 GigE PoE 740W, 2 x 10G SFP+, LAN Base".
WS generally is a prefix on part numbers for all Wire Speed switch products. (Though that breaks down a bit on some of the smaller Catalyst models.) I've also seen it refer to "Workgroup Switch" class products.
FS means is is a switch with fiber user ports.
X distinguishes the newer 2960 models from the original 2960 series.
FPD-L mean it has Full PoE+ and comes with Lanbase software feature license.
Generally the letters at the end refer to the uplink type and license level.
Also please see this earlier discussion:
https://supportforums.cisco.com/thread/2135341

What is the correct part number for dvi to vga adapter for macbook pro model A1260

Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
My adapter has reached the end of useful life.
Thanks!

You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
The DVI connector connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

How to find part number on Motherboard?

Hi all - I've got a G4 MDD dual 1g mac that I fear has a bad motherboard. I have done some preliminary research into buying a replacement board, which leads me to my question (2-parter):
1. Can anyone tell me how to find the part number or identify the motherboard in this computer? (so I don't buy the wrong thing)
2. Other than eBay, can someone recommend a good source for finding a replacement board?
Any info would be MUCH appreciated. Thanks in advance!

G4ce,
The part number is at the end of PCI card slot 5. It will say "APPLE COMPUTER 820-nnnn 2002" (or 2003).
820-nnnn is the part number, it'll always be 820 in the first part, but the last 4 digits can be different depending on model and manufacture date. Typical values are 1308, 1440, 1445.
If you're planning to re-use your existing processors, the new board number should match exactly.
I say"If" because you may find a complete MDD or one sold without certain parts a lot easier than the exact model number board.

R835-P56x motherboard Part number

Toshiba R835-P56X
Part number PT324U-008003
I need a motherboard but there is no part number on original motherboard. would anyone know the part number or know where i can go to find out what it is? Its a I5 systemboard
Thank you
Solved!
Go to Solution.

Portege R835-P56X (PT324U-008003)
P000542730 or P000549190
-Jerry

Software Part Number..

Similar Messages

Maybe you are looking for