Software RAID0 for Video Editing+Storage: What Stripe Block Size ?

Hi
I'm planning to setup a raid0 with 2x 2TB HDD's to store and edit the videos from my digital camera on it. The most files will have a size of 5 to 15GB. In the past i had raid0's on RHEL with the (old) default stripe block size of 64kb. Since the new drive will only contain very big files would it be better to go with 512kb stripe block size ? 512 is also the default setting now in the gnome disk utility which i use for my partitions.
Another question: Does the so called "raid lag" exist ? I think i've seen occasional stuttering in movies when they're played from a raid0/5 without cache enabled in the player (with cache its fine). Games also seem to occasional freeze when installed on raid (I had this problem in the past with wine games installed on raid0, they sometimes freeze when they try to load data which never occurred ever on a normal HDD).
Many thanks in advance for your suggestions

That is a hard question to answer.. Nothing is best for everyone... However if i am to generalize it I would put it this way.. If you want to cut everything from a short promos to hollywood pictures..
A high end windows pc (only cause mac pro hasn't been updated in ages)
Avid Media Composer with Nitrus DX
Two monitors
Broadcast monitor
HD Deck
pimping 5.1 speakers
A good mixer
You are looking at over 70,000 or 80,000, could even approach even more.. HD decks run atleast 15k.
If price is not an issue then there you go....
However this is not realistic for most people nor best solution by no means... I run a macbook pro with Avid (as primary) Final Cut 7, Final Cut X (for practice, didn't have to use it for a job yet), and Premiere (just in case)
I am a final cut child who grew up on it and love it however everything I am doing in last few years is on AVID...
Have a second monitor..
I am very portable and rest of the gear I usually get where ever I work at.. I am looking into getting a good broadcast monitor connected with AJA thunderbolt..
Like I said this is very open question, there is no (BEST) it all depends what you will be doing.. If you get AVID (which can do everything, however is cluncky as **** and counter intuitive) but you are only cutting wedding videos and short format stuff, it would be an overkill galore.. Just get FCP X in that case... Simple,easy, one app...
Be more specific and you will get clearer answers..

Similar Messages

  • Best Raid 5 expandable external harddrives for video editing & storage.

    Hi,
    I'm hoping to get opinions and recommendations from the community concerning the best Raid 5 expandable external harddrives for HD video editing and storage. Initially, I'd like to start with an 8tb and have it expandable to 16tb, that will work with both Mac and PC. There seem to be a number of options, but it's difficult to find reviews from video editors. It would be nice to stay under $ 2,000.00.
    Thanks for any input.
    Heather

    If the brief includes "fast enough for video editing", you are looking for an editing solution.
    If you want it to be fast enough to edit video and be shared by two computers, you are looking at a server type system connected through a very fast network interface (fibre, dual channel iSCSI)
    If this is the case, $2k is not going to do it.
    What it comes down to is this - Basic backup can be had relatively inexpensively as can direct connect RAID systems. The complexity and cost comes from the shared network storage with enough bandwidth to support multiple systems.
    What do you want for your $2000?
    Regards,
    x

  • How Practical Is MiniMac for Video Editing?  What Other Limitations

    Now that I have two MacBooks (one for me, one for the Missus), I'm thinking about replacing -- or at least augmenting -- my nearly two year old Dell XPS 400 desktop with a high-end MiniMac. I thought about an iMac but I just don't like how the iMacs elevate the viewing angle of the display with 4+ inches of hardware in the case below the screen. I like my monitor right on the desk top, and if I get Mini I can adapt it to my existing display.
    What I do at the desktop is mostly photo processing and some web development. I'm going to presume that the Mini with 2GHz and 2GB or RAM will be quite adequate for those purposes.
    I have not done much video editing, but one of the reasons I'm moving to the Mac platform is because I keep thinking one of these days I'm going to. So the question becomes: without a dedicated, high-end video card/RAM, what are the limitations on video editing with a Mini?
    I mean, the all come with iLife, and iMovie, and now iMovie HD-08, so I assume that even the Mini is capable of SOME video editing chores. I'm just wondering at what point I might hit a ceiling and start to wish I'd gone a different route.
    I gather that the Mini is intended as an "entry level" Mac (not unlike the MacBook) so I wonder what other limitations users have encountered, if they've ever hit a point where they've said to themselves, "****, I should have gone another route..." ??
    I'll spend some more time with some of these other threads too, but that's my primary issue at the moment.
    Thanks,
    --PS

    Hi
    +I gather that the Mini is intended as an "entry level" Mac (not unlike the MacBook)+
    The MacBook and Mac Mini are very similar in that they both use laptop components and the specs are almost the same. Both use an Intel Core 2 Duo processor, integrated Intel GMA 950 graphics, have a 667MHz FSB and a 2.5" 5400 RPM hard drive etc.
    Whilst it doesn't answer your question, I'd be tempted just to hook up an external display, keyboard and mouse to the MacBook and see how you get on. I'd imagine the experience would be very similar to using a Mini, and you'd need a display, keyboard and mouse for the Mini anyway should you then decide to buy one (they're not included).
    I expect hard drive speed and capacity would be one limitation, for the MacBook and Mini, but you could always hook up an external firewire drive etc.

  • What upgrades should I get for my MacBook pro for video editing?, What upgrades should I get for my MacBook pro for video editing?

    Hi,
    i am a student and I will use my MacBook pro to edit my movies, I will go to a film school and I think the preview of my previous works has to be professionally done. But I don't know what upgrades should I get to make the editing smooth, and have enough storage.

    as an hobbyist on a shoestring budget, but with the head in the sky, based on my own experience:
    8GB Ram is ok, 16GB is nice
    most important, aside 'skills': …
    <voice of Steve Balmer> ext HDD, ext HDD, ext HDD, ext HDD!!!
    I'm handling here 4k material on a MacMini, which doesn't even have a dedicated GPU. In Multicam.
    Distribute your materials on several hard drives, make a plan first, before editing, what & where, you get instantly messy and lost without a plan.
    What mentioned before: back ups! I'm not shy using a 99€ Raid0 (=two 2.5" drives + Disk Utility's feature, to create 'software raids' ) - Raid0 are NoGo for pros, 'cause it doubles the chance to 'crash' - no prob for me, having my backups - inconvenient to reload everything - but I'm no News Room
    For professional 'look' care for the other stuff :
    tripod with 'fluid head', lights, more lights, ND filters set, ext. microphone(s) at last a shotgun and a lav, ext audio recorder (I'm abusing my ol' iPhone4 and a tiny box called iRig, which offer XLR connector), did I mention lights? , a good bag and a waterproof, lockable aluminium box, soft boxes for light, maybe a shoulder rig (starting at 80€), 200sq ft of some green cloth for green screening (if your school doesn't offer a 'studio') FCPX does marvel with even really bad lighted green screens, those handy foldable 'brighteners'/reflectors, to bounce light ('Rembrandt lightning') … finally tons of odds and ends, starting with gaffer tape, ending with SDcards ...
    And DO things, try things, play with your stuff, make experiments just for the trash bin!
    Enjoy your film school (I'm envy… )

  • Storage options for video editing

    For video editing is it better to use an external drive as the scratch disc or use an internal (non-bootable) drive. I keep getting conflicting information. I would like to get an additional 500gb for my system (Mac Pro G5)but don't know what direction to go. Any advice/opinions would be greatly appreciated.

    Well it all depends. Certainly, there's many good reasons to install a second internal drive. But I think it's better to use this as a "clone" of your startup drive. When I have a stable OS and application combo, I clone my startup drive to the second internal drive using carbon copy cloner (available at versiontracker.com). After cloning, I always try starting up from the clone to make sure everything's working. Then I can do a software update, install additional apps, and if my system goes south either from updates or some sort of corruption, I can quickly restart from the second internal drive and get back to work.
    I've installed a sata card and bought a 5 bay sata enclosure from macgurus. Trays are about $ 25.00 and drives keep getting cheaper. I can quickly swap out drives and you can also stripe the drives if you need faster thru put.
    I used to have as many as 11 firewire drives chained to my g5 and it worked great for years. But then things went seriously south and it took many months of troubleshooting to figure out the problem. It seemed like different brands of firewire drives did not play nicely together. I've been working with the sata enclosure for 2 1/2 years without any problems.

  • What Macbook Pro to get for video editing?

    For software like adobe after effects cs5, what macbook would be the best, I have pretty limited money so is the base model ok? if not whitch one works well?
    Thanks!

    The top end non-retina, 15" anti-glare is the best. SSD preferred, has a Superdrive. RAM and hard drive upgradable later by the user.
    The retina has a glossy screen which is hard on the eyes and using in various places, it's battery life is terrible and the images are not correct as it's blowing things up to mach the higher pixel rate. No Superdrive. You can't open the machine up, you can't clean the fans of dust you can't upgrade it later, you will have to max it out at purchase for a small fortune and go way over budget. Plus there really isn't too much difference in the quality of the screen with regular MBP's anyway, just eats battery life to drive that huge pixel screen. You'll be replacing it a lot sooner than the standard 15"
    Don't waste your money on the 13", it lacks a dedicated graphics, the CPU does it thus it's HOT. Won't 3D game well if your also into play.
    Top end 15" antiglare is perfect.
    https://www.youtube.com/watch?v=_X0wo6dIsMU
    Actually the MacPro is the perfect choice of power and performance for video editing, with it's substancial cooling. But you want a laptop , just know things will take longr and the machien will be hotter as a result and wear out sooner if your doing 3D gaming or video often.

  • What preset MacBook pro would be better for video editing and eventually college?, What preset MacBook pro would be better for video editing and eventually college?

    Hi,
    I am thinking about getting a MacBook Pro.  My current computer is very very old and can not be used.  I would like to use it for video editing and eventually to use when I go to college.  I want to get one of the preset 13 inch MBPs.  I do not know which one will be better for my purposes.  Could anyone please help me??

    Any computer made today, Windows or Mac, will be MILES ahead of what you are now using.
    Raw CPU speed is not the total benchmark of a computer. Look at it this way. A 2.6GHz CPU made today is much faster then a 2.6GHz CPU made just a few years ago, like 3 years ago. the difference between a 2.6 and a 2.9GHz CPU is 3 tens of 1 GHz, 300MHz. The percentage difference is about 8-9 percent (.08-.09). Back when CPUs were listed in MHz, 120, 300, 600, if you have a 300MHz CPU and you replaced it with one that was 300MHz faster that was a Big Jump. You doubled the computing power. Today 300MHz, .3GHz, is next to nothing. Especially for the price jump.
    Note that when you make the switch you will either need to update your program, that means Re-Buying most of them, to work on the Mac OS or install a version of Windows in either a Boot Camp partition, Dual booting the Mac, or into a Virtual Machine software program to run the Windows version of those program.
    If you decide on a Mac buy the BASE model that is offered for the CPU speed you want. The RAM and hard drive can be upgraded by you for much less then what Apple charges for those upgrades. With the hard drive if you upgrade it to a larger and faster drive, Apple supplies 5400RPM drives, like a 7200RPM drive you get to Keep the original drive to use in any way you like. Like an external drive.

  • What is the best set hard drive set up on an iMac for video editing?

    what is the best set hard drive set up on an iMac for video editing? i only have one internal 2tb hard drive.

    CIANCIO.mov wrote:
    so is it best to edit directly off your LaCie fire wire drive, or off the internal HD and store on the external?
    The second.
    Which one is faster to edit with?
    The internal will operate  faster but editing uses both the Final Cut Application (on the internal), and the external which is used to store and access the video that you have shot and on which is stored the Capture Caches, and which also stores and accesses the various other caches such as Video Render, Waveform etc.
    Does a faster hard drive decrease rendering time?
    I think it must, but I have never timed it.
    whats Faster, having another internal drive or a thunderbolt or firewire 800 external drive?
    I think that a second internal drive would be faster than an external Firewire drive. However, a Thunderbolt drive is said to be very fast, but I do not know whether it would be faster than a conventional internal drive. This question would best be asked of the Final Cut Discussion Groups because thay might have experience.
    i would love some specs, and input on different drive setups for an imac with a single 2TB Hard dirve.
    Again, the discussion groups would be the best place to answer this.
    enyone. thanks,
    Rendering long sections of video in the Final Cut software does take a long time, especially when it is imported from another source, such as a .mov, and when something simple like a transition is inserted or even moved or altered, or a filter is applied, rendering must be carried out in that area to see the effect properly. So you are on the right lines in thinking about how to speed it up.

  • What format is best for an external hard drive for video editing on a mac?

    What's the best format for an external hard drive for video editing to be use with a mac only? I need to format my new hard drive and want to be sure I choose the right format.

    I concur with Kappy. His suggestion is correct.
    Allan

  • What is the best Apple notebook for video editing and pro music creation?

    What is the best Apple notebook for video editing and pro music creation?
    I know I could opt for the most expensive and probably get what I want that way, but I´m not made of money, so what are your suggestions for minimum criteria and which would you recommend?

    MacBooks Pro are great Macs with a good hardware, so all of them will work for the use you want, but I think that you want the biggest display possible because of your uses. In this case, it has to be a 15-inch non-Retina MacBook Pro, with the settings you want. Note that, after buying the Mac, you can upgrade the HDD and memory without voiding the warranty, so you are free to install as much memory and the HDD size you want after buying it. It's my opinion, but you are free to do whatever you think it's better

  • What is the best macbook pro for video editing dslr footage?

    what is the best macbook pro for video editing dslr footage?

    It is the GPU that is important.  All the CPU's will be fast enough.  If you can affords it, the 15" with the NVIDIA GPU is the best.
    Ciao.

  • I want to upgrade my Power Mac G5 Quad (Mac OS X 10.5.8) for video editing purposes. What upgrades should I make?

    Hello!
    I want to upgrade my Power Mac G5 Quad (Mac OS X 10.5.8) for video editing purposes.
    Rendering,editing and exporting takes some time on my computer. I just want things to go faster.
    What upgrades should I make?
    Thanks in advance!!!

    Here are other video cards that you can search for that will also work in your G5.
    NVIDIA GeForce 7800 GT with 256 MB of GDDR3 SDRAM, and NVIDIA Quadro FX 4500 with 512 MB of GDDR3 SDRAM
    http://www.amazon.com/nVIDIA-Quadro-FX4500-PCI-Express-631-0110/dp/B004XCYG10/re f=sr_1_3?s=electronics&ie=UTF8&qid=1365657320&sr=1-3&keywords=NVIDIA+Quadro+FX+4 500
    or
    http://www.amazon.com/Power-Nvidia-256mb-Geforce-Express/dp/B00BL30JQU/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1365657552&sr=1-3&keywords=NVIDIA+GeForce+7800+GT

  • What is the best Monitor for Video editing & Graphic Design?

    Hi every one,
    I would like to find out what is the best monitor for video editing and graphic design that you recomend, I am trying to buy one but not sure which one is good and not expansive.
    Thanks very much

    I don't want 2 monitors, so a single 27inch model just what I need... plenty of room for PPro, or I can have a Word document and a Text file open and side by side
    John,
    That is personal taste and there is no discussing taste. However, from my perspective, and that is personal, I prefer 3840 x 1080 resolution with dual monitors over 1920 x 1080 with a single monitor, but that is because I very often have Firefox, Filezilla, Dreamweaver and some other applications open at the same time, switching between the Adobe forums, Gmail accounts, Notebook results from the PPBM5 data submissions, PPBM5 form submissions, MySQL access, phpadmin pages to update the database, the PPBM5 results pages and various DW .php pages for the maintenance of our database and switching back and forth between various versions of PR. I occasionally really run out of real estate with all these applications and could not consider a single monitor with only 1920 x 1080 resolution, even if it were a 105" screen. In the future I would even like to have a four monitor setup (with MPE hardware support) in a two by two configuration, so that I can freely move my application screens around.
    If that happens, notice I say if and not when, my preference for a monitor would be something like 4 Samsung F2380 monitors. Small bezel, great display and panel, affordable.

  • 3D Graphics Cards for Video Editing (what's the real deal?)

    Hi
    I've known for some time that 3D graphic cards offers no REAL significant improvements to VIDEO EDITING and RENDERING.
    I also know that for real video editing, one needs the likes of Quadro cards, not 3D Gaming Cards like GEforce/Radeon.. and that the SOFTWARE being used needs to have support for using GPU for rendering such as CUDA technology
    I tried to update myself and read around a bit... w/ the advancements of software today, 3D gaming cards now offer more improvements for video editing should software use 3D effects, transitions, or similar.. but still not that much really
    Q1: am i on top of things so far?
    And recently i found out that Adobe Premier CS4 (and other vid ed software) now takes advantage of GPU power.. (really?)
    Q2: HOW MUCH advantage though? like a lot like equally as useful as CPU power?? or a bit of gpu power to help cpu?
    Q3: So, would it be practical to spend $$$$ on a highend GeForce Card like GTX295 to improve video editing/rendering performance? or would it be rather more useful to spend that on higher CPU or overall PC specs?
    Would really like to hear your thoughts on these.
    Thanks

    In terms of impact on performance, you can rate the various components from most important to least important:
    1. CPU
    2. RAM
    3. Disk setup
    9. Video card.
    Even a mildly priced card like an ATI HD 48xx is not taxed to its full capacity on a very fast system, even on a 3.8 GHz overclocked Nehalem the CPU is the bottleneck, not the GPU.

  • What is the best External Hard Drive for video edition?

    Hi guys, I'm looking for a good firewire external hard drive for video edition.
    I have 2 HD already but the bigest is a Seagate and is a trouble cause this one have an auto sleep system that is impossible to put out and when I'm printing to tape this one fall to sleep and the video that I'm transfering get a delay horrible!!
    I'm looking for a 1 tb or 2 tb external HD.
    Can you recomend me something??
    thanks a lot!

    Gufa wrote:
    Thanks Jouu, great prices but I need to know if those discs doesnt have the autosleep function!
    Thanks
    That was why I mentioned the 24/7 live Chat support, they (should) know the products they sell.
    8^)
    Joe

Maybe you are looking for

  • Sype connect Cisco UC520 authentication problem

    hi,  i havce configurated a skype connect account with credit and a sip profile. I have it configurated in my pbx cisco uc-520 but  dont works.... skype page account said "El usuario de SIP no está registrado aún en sip.skype.com" and the log of my

  • Bose not optimized for iPhone?

    When trying to use my new iPhone with my Bose speakers it states that the accessory is not optimized for this iPhone, yet it plays my husband's just fine (same model).  Any ideas?

  • How does it work if you keep nano

    Hi, I use a nano with the nike plus running sensor ans want to carry on doing this. If I buy an iphone does anyone know if you can run two ipod devices off one itunes account? Thanks Josh

  • Making jpg or png images in Java...

    Hello everyone, Can anyone please post a simple class that simply does the following: //Create some sort of image Graphics g = image.getGraphics(); g.fillRect(...); //Export the image to a jpg file: e.g. a.jpg/a.png Thank you

  • AS3 loadVars and arrays

    I have a text file with variables and an swf that a friend made for me. Unfortunately i dont have the .fla file and i am trying to recreate it. the file contains 3 variables with values, repeated 4 times and a final variable (called varDone) that tel