Software record voice and video

Dear All,
Do you know software record voice and video after record we can copy to Laptop...... Does everyone know this program??
Best Regards,
Rechard

griffin's italk records voice. and after you record, you can transfer it wirelessly to a computer on the same network. you need to download a small program from griffin tho. it works really well, i'm very pleased with it. and best of all, its free. look for it in the app store.

Similar Messages

  • Welcome to the Voice and Video over WLAN Discussion

    Welcome to the Cisco Networking Professionals Connection Wireless Forum. This conversation will provide you the opportunity to discuss issues surrounding Voice and Video over WLAN. We encourage everyone to share their knowledge and start conversations on issues such as bandwidth intensive wireless applications, and any other topic concerning Voice and Video over WLAN.
    Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
    We encourage you to tell your fellow networking professionals about the site!
    If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected]

    This is easily done with dial peer statements . The dial peer in your originating router must route the calls to the terminating router first. That would look like :
    dial-peer voice xxxxx voip ( the xxxxx is just a tag)
    destination-pattern 45... (that would route any 5-digit calls beginning with 45)
    session-target ipv4:xxx.xxx.xxx.xxx (ip address of the terminating router)
    If digitones are to be dialed after the connection is established, use the statement:
    dtmf-relay-h.245-alphanumeric
    You could also use a statement to specify the codec to be used:
    codec g711ulaw
    You would need multiple voip dial peers if the calls were going to different routers based on the dialed digits. If all calls are sent to the same terminating router, use all wild cards in the dest-pattern statement.
    At the terminating router configure pots dial peers:
    dial-peer voice xxxxx pots
    dest-pattern 45...
    port x/x (whichever port the call is to be terminated on)
    prefix 45 (this re-inserts matched digits which are stripped off by the pots dp)
    Repeat for other ports which will receive calls.
    Paul

  • Eight-Class Model QoS for voice and video

    One of the QoS recomendation in the SRND "Enterprise QoS" is to create a Eight-Class QoS Model utilizing a seperate priority queue for voice and video.
    It says that even though you have only one physical priority queue, that LLQ has an implicit policer that allows for time-division multiplexing of the single priority queue. This implicit policer abstract the fact that there is essentially a single LLQ within the algorithm and, thus, allows for the "provisioning" of multiple LLQs.
    My question is if anyone has tried this and if there are any limitations on the platforms that can support this "dual-LLQ design."

    Design guide which is basically the QoSDesign recommendation bible.
    http://www.cisco.com/univercd/cc/td/doc/solution/esm/qossrnd.pdf
    It has a large section for WAN recommendations...while you may not
    need to follow one of these Based on my understanding what what you
    have for a link (DS3) and what you are trying to accomplish, I
    believe the following section would be a good place to start.
    - WAN Aggregator QoS Design
    - WAN Edge Classification and Provisioning Models
    - High Link Speed QoS Class Model
    - Eight-Class Model

  • Has anyone tried installing the Google Voice and Video plugin?

    Hi,
    I wanted to check out the Hangouts feature at Google+, but I need the Google Voice and Video plugin for that. I tried unpacking the deb package supplied by Google and installing it manually, but the plugin does not work and Firefox just keeps crashing. Could anyone actually get it to work with Arch yet?

    Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
    Now trying to install from there!

  • ISight conflict when installing Google Voice and Video driver

    After installing Google Voice and Video driver, the iSight stops working on Flash based applications or websites.
    Two camera drivers are installed: Google camera 0 and Google camera 1.
    Even if I go to Settings and choose the correct driver (iSight Integrated), it does't works.
    The only way I found to solve this issue is removing those Google's drivers (Library/Application Support/Google/GoogleVoiceAndVideoUnistaller).
    However, this is not a solution since I can't use GTalk anymore.
    Does Flash Player 10.2 fixes this conflict?
    Regards,
    Flávio Mikami

    Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
    Now trying to install from there!

  • BBM Voice and Video calls not working

    Hi!
    I'm using BB Z3 OS: 10.3.1 and my friend using BB Z3 OS: 10.2.1, we both are using BBM over wifi and our BBM is upto-date but when i'm dailing call, "Connecting to BBM video service, please wait and try again" error apears, why we unable to make voice or video calls? any one tell me?

    The last I read, BBM voice and video is not available in Pakistan.
    I believe it is in UAE.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem with BBM voice and video on Z10

    i have problem connecting on my Z10 with BBM voice and video. before it works fine but i think after an update of BBM is not working anymore. the chat sesion works fine.
    i have a second Z10 but that one works fine.
    any solution ?
    THX
    Bryan

    On your BlackBerry10 device:
    Reboot: On the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
    Now, try again.
    Likewise, ask a BBM contact of yours to tell you if your BBM contact has the green icon for BBM voice/video.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I'm trying to record audio and video simultaneously using iMovie and an external mic and the computer is picking up the audio but when I replay the video there is no sound. Any ideas?

    Can't get iMovie to record audio and video at the same time using the built in cam and an external mic.

    iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
    You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
    (note: remember what you changed it from so you can change it back later, before you import another CD)
    Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

  • Trouble installing plugin for Google Voice and Video

    Just upgraded to Yosemite. After doing so, my Google Voice and Video stopped working. I have re-installed the plugin multiple times with each attempt reaching the "Install Successful" message. I've restarted Safari and my computer, but the Google Voice and Video for Hangouts is still not working. Any suggestions??? Thanks.

    Hello again,
    Seems to be fixed in the Firefox new version (4.0.1).
    Best Regards.

  • How do I use my web cam to record audio and video? I can get the video to work but no sound.

    I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • Trying to record Stereo Mix with a monitor through my headphones.  Using Screenium to record Audio and Video, using Avid MBox Mini with MXL 909 Microphone for the audio through the interface.

    Basically, what I am trying to do is this:
    Record my screen through Screeenium, record my voice as audio through an Avid MBox Mini (interface) with a MXL 909 microphone to pick up the audio.  I have all that figured out.  I'm able to efficiently record my audio and screenplay through these instruments and programs.  What I am having trouble with is the stereo mix.  I am running into a slew of problems here... My goal: Add on the audio of a game that I am playing (for example, Amneisia) so that the audio for my game will be picked up internally, and not through the speakers to be recorded through the microphone.  I want there to be no external sound except me talking into my microphone.  I also want to be able to HEAR the audio of the game through my headphones (and if possible, myself as well, through a monitor maybe?)
    Problems I have run into so far:
    -Haven't gotten it to pick up in game audio at all while using headphone.  Can't figure this out
         -Downloaded soundflower, have the output as soundflower.  Not picking up anything, will put all my sound and midi settings at the end.
    -When I do record through my microphone, it is only picking up a single channel (left earpiece only, no right channel)
         -I have figured out it is NOT the equipment, I use Pro Tools and am able to pick up both channels with my mic, recorded a few tests. It's settings and I can't      figure it out
    -Trying not to run 16 million programs while running the game, will cause lag.
    Summed up:
    Trying to record:
    -Audio from gameplay of any game I am playing through alternative route of speakers (do NOT want to record game audio through speakers, internally)
    -Record voice through Avid MBox Mini and MXL 909 microphone.
    -Record screen gameplay through Screenium
    I followed a guide that told me to achieve "stereo mix'' I need to download soundflower and follow "X" steps.  That is done and these are my current settings:
    Audio Midi Setup - Stereo Mix custom Aggregate Device, Soundflower (2ch) selected, Avid Mbox Mini selected, Soundflower Output #1 has 2 channels (1-2), using Avid MBox mini for "Input" in order to record.  Using Soundflower AND Avid MBox mini as "Output" in order to hear the sounds and replay game sounds (could be the problem? Maybe?)
    Sound Settings - Output Stereo Mix (custom channel)  Input Avid MBox Mini (recording)
    I'm hoping this isn't too hard to understand.. I'm VERY bad at explaining information regarding computers.. It's hard becuase I don't understand it.  I can clarify anything that I am able to, so any help on finding certain things would be greatly appreciated.
    My computer: Macbook Pro MAC OS X Lion (11G63) 10.7.5  2.4 GHz Intel Core i7 4GB 13333 MGz DDR3  (If any of this is imporant)

    Hey guys,
    I tried to do some research and it looks like you need to have an external device and its drivers, such as an external microphone, installed on the computer to record audio that can be saved as a sound file. Another Suggestion is to try an auxiliary spliter for your headphones and external speakers?
    What software are you using to record your game?
    If anyone knows anything different, please let me know.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • VOICE AND VIDEO OUT OF SYNC

    HEY, i made a huge imovie project.. and the sound and video is out of sync, the sound comes seconds before the video... HELPP!

    I must say I am still astonished how much this is a problem in general. I saw Seinfeld on TV once with the lips still moving for about a second after the voice stopped. I'm talking about cable TV, here! And there are the videos on You Tube. A lot of them are out of sync too.
    Synchronizing sound and picture was initially a difficult problem, but the movie industry pretty much solved this c. 1930. And now, EIGHT DECADES LATER, suddenly it's a big problem again.
    Yes, for this and other reasons, the world will end in 2012. (^_^)

  • Record voice and audio?

    Can anyonet tell me how I can record my voice and audio as background music with one of the ilife applications? I have ilife 06 I just don't know which program to use to do this.
    Thx
    Dorian

    Use Garageband... Click on the "plus" and select real instrument. You can record your vocie from there and edit them anyway you want later on.

  • Voice and Video out of sync after burn in iDVD

    We are having trouble keeping the voices and movement together after a burn. Can anyone give us a suggestion?

    Barbara and Amy
    You may have experienced what many of us have encountered. Cameras are usually set to record in 12 bit audio. When these recordings reach iMovie they edit and play fine but when they go on iDVD the sound is out of sync.
    Switch your camera to 16-bit in future to prevent/minimise the effect.
    You should also look at a couple of apple pages http://docs.info.apple.com/article.html?artnum=42974 and http://docs.info.apple.com/article.html?artnum=61636
    Also there is some good information on
    http://www.danslagle.com/mac/iMovie/audio/1001.shtml

  • Record Audio and Video Simultaneously.

    Hey,
    So I have Quicktime pro and I know how to record a video using my built in camera on the imac.
    I also have logic and am more than capable of recording through various input devices such as mics, keyboards and guitars.
    But how can I record a video of myself and audio input, such as a mic/me talking/whatever at the same time?
    I'm using a digidesign Mbox 2 for my audio input.
    Thanks

    What happens when you set your inputs properly and record a clip in, say, PhotoBooth? Do you get audio and video? It should be pretty much as straightforward as that.

Maybe you are looking for