Software Recovery Framework ?

Does anybody hear something about Software Recovery Framework on Solaris 8? It's like you can register your own process to OS thru some sort of API, and if the process is dead, OS will respawn it.
I searched on the Sun web, but cannot get it.

The company does not support the end-user changing software variants, and so your wishes are unlikely to be granted. Your screenshot shows a version of the software intended for retail use only, and as it is a non-commercial package, ease of use is a low consideration.

Similar Messages

Software Recovery Tool Odd Result with Lumia 620

Good Afternoon,
One of our users bought his Lumia 620 to me earlier, it had hung apparently. He removed/re-inserted the battery and since then the screen just shows Nokia on powerup and nothing else happens.
I tried all the usual soft reset/hard reset/spinning in my chair whilst praying to the great Finnish gods of telecommunication etc. All to no avail.
I then downloaded the Software recovery tool (V1.4.3) and installed it, this again would not see the phone. I followed the instructions and then it picked it up.
According to the recovery tool, it found the right hardware revision for the phone and suggested the correct country version of firmware (3056.4000.1404.0004). Happy days.
I told it to go and do it's thing, upon which it downloaded the 1.37GB of firmware and flashed it to the phone.
At this point the recovery tool, was waiting for the phone to reset asking for a pin for 180 seconds. At this point it timed out. The phone itself just sat there looking at me blankly and then reset itself.
The phone itself re-booted and now has a screen with 3 red wavy lines and the word TIM on it. (see attached pic)
So my questions are......
1. Have I done something worng?
2. If I haven't, then does anyone have an idea what has happened?
Thanks In Advance
Attachments:
WP_20140718_002.jpg ‏1623 KB

Hi All,
Thanks to Abi99 and scoobyman for the replies and pointing me in the right direction.
It seems that the failing phone is indeed an Italian phone that I have been sold as a UK variant (thanks Amazon)
The product code for the UK one's I have is 059R4G7. The faulty phone begins 059S... (i'm at a different office today so don't have the full code) . Interestingly the firmware for the Lumia 620 TIM Italian version is the same number as the UK country variant hence my confusion.
So the software recovery tool is actually updating correctly with the TIM softwaredependant on the model number. So it's just that the phone is actually broken (written off to experience). I'll be more careful checking the ones I receive in the future.
As an aside I, it would be nice if the software recovery tool could allow you to choose which firmware to load. However I realise this opens a massive can of worms and is unlikely.
Thanks All.
Andy.

Software Recovery Tool : Lumia

Please a request
please add search button in your both recovery tool
Lumia Software Recovery tool and Windows Phone Recovery tool
as adding product code search is very helpful
like i have lots of lumia
and one lumia is in office and i know the product code
i can enter the product code in search bar and can download the firmware - when i am getting high speed
please please add a product code search botton
example : see in screenshot
@Aakash006sharma
( Microsoft Enthuasist - Tech Expert )
if you like : press star button
Attachments:
Screenshot (172).png ‏141 KB

The company does not support the end-user changing software variants, and so your wishes are unlikely to be granted. Your screenshot shows a version of the software intended for retail use only, and as it is a non-commercial package, ease of use is a low consideration.

Heads up: The Nokia Software Recovery Tool is bust...

Nokia Software Recovery Tool won't load
Anyone else having problems with Nokia Software Recovery Tool?
I've heard all the generic cookie-cutter responses "Try a different OS" "Try a different cable"... the problem is not with our OS or cables, but rather the update checking phase. It always returns the issue "Could not check application update". Apparently this just started recently as there were users able to use this software as recently as Wednesday.
Got ready to wipe two phones for selling purposes. This software was necessary because I didn't want to sell them while they were on the dev preview, and the typical reset doesn't take a Windows Phone off dev preview... I have mostly been met with this piece of work all throughout random times of the day.
Won't work for anything, and it also does not allow us to skip the update so there's no winning here. That update really should be optional simply for the sake of avoiding crippling instances like this. If the update is broken, we should at least be able to use what's there... as it is all I can do is open this software and close it.
...just bringing awareness to Nokia's home turf so that it will (hopefully) have a speedy resolution.

2014-10-05 03:18:42Z | 7140 (NokiaSoftwareRecoveryTool) | 0x00000001 | NokiaSoftwareRecoveryTool.exe | NokiaSoftwareRecoveryTool.States.AutoUpdate.Checking.CheckingState | Error | | <!CDATA[[System.Web.Services.Protocols.SoapException: Service specific exception: com.nokia.posti.server.caresuite.webservice.InternalErrorFault
at Nokia.Enterprise.Repository.InstallationPackets.InstallationPacketRepository.EndFindLatestPacket(IAsyncResult asyncResult, VersionComparisonResult& versionComparisonResult)
at NokiaSoftwareRecoveryTool.Connectivity.Castor.Firmware.GetAutoUpdatePackage.GetAutoUpdatePackageCall()
at NokiaSoftwareRecoveryTool.Logics.AutoUpdate.AutoUpdateLogic.CheckAutoUpdate()
at NokiaSoftwareRecoveryTool.States.AutoUpdate.Checking.CheckingState.BackgroundWorkerDoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)]]>
2014-10-05 03:18:42Z | 7140 (NokiaSoftwareRecoveryTool) | 0x00000001 | NokiaSoftwareRecoveryTool.exe | NokiaSoftwareRecoveryTool.StateMachine.BaseTypes.BaseState | Information | Getting Next Error state of CheckingState, error code: CheckingAutoUpdateFailed |
I get this in Romania. Very sad.

Lost software recovery usb

I have lost my software recovery usb that came with my macbook air.
Is it possible to get a replacement and if so how?

Since you are using Mavericks, it should not matter.
You have a recovery disk partition built in to your hard drive. You can recover by holding Command + "R" while booting.

Preview Dev program vs nokia software recovery too...

So i was a dev preview user, but when the 8.1 came out with the official version that included cyan i was impatiant that the dev preview did not have cyan, so i used the software recovery tool to install the version that had cyan... bad idea...
First off it wiped the phone and i had to put EVERYTHING BACK, with over 5 gigs of photo's that took forever!!!
Secondly while i got cyan, i did not get the most current version, i noticed that my cortana was not up to par with my dev preview buddies anymore (no cortana icon changes for impressions etc...)
I just realized today that i had to turn the dev preview back on, and now my phone has found a critical update to 8.1...
I'm in the process of installing the prev dev update now and hoping that it finally gets my phone current on ALL software, will post more once its done!

yes, reinstalling software wipes the device completely. but you should have had all your pix backed up to the cloud, which you shouldn't need to download unless you want to save to your device again.
the preview for developers will always have the most up-to-date updates as that is why it is a preview, but knowing that you could loose your data (which has never happened, that I am aware of, unless it is a user error)
you should be good now, and also have the ability to add folders to your start screen, like denim, though you will still see cyan in the about part.
it was my understanding that they fixed the ability to get the updates from the OTA carrier versions, ie-cyan, in the update after cyan.
I cannot, however, confirm this until "denim" officially is released by ATT in the US.

Nokia Software Recovery has Bricked my Phone!

My Lumia 928 died when I was recovering it and now I can't turn it on!
The phone doesn't seem to be charging and windows doesn't recognize it anymore.
Is there anything I can do?

Hi, AxleRose.
Let's further isolate your case. What's the current status of your phone now? Can you tell us why you're recovering your phone using the Nokia Software Recovery Tool? Are you trying to fix an issue? What's the software version of your phone before you use the recovery tool?
When you connect it to the charger that came with it and let it charge for about 20 minutes, can you confirm that the start key flashes? You mentioned that "windows doesn't recognize it anymore". Does this happen regardless the USB cable you're using and USB port it's connected to? If possible, try connecting the phone to a different PC.
We look forward to your reply. By the way, welcome to our community.
Good day, Sensonic.
Yes, it would still be under warranty. Learn more about the manufacturer's limited warranty by visiting this link: http://nds1.nokia.com/files/support/global/phones/guides/WC_B9229743_EN_1.pdf.
Cheers!

IPhone Software/Recovery Mode Issue

After updating my iPhone Software a few moments ago, my iPhone appears to no longer work (I can't get past the apple icon start screen, which keeps refreshing) and iTunes is saying that the iPhone is in recovery mode. I now am being offered the option of restoring the iPhone as the only way to get it working again. Is there any other way here to not lose the 700 photos and other personal information I have amassed on my iphone and get my iphone working again (my software update seems to have also wiped all my photos of off iPhoto). Help very much appreciated.
Thanks,
Antal

Hey iPhone Owner 17,
Restoring the iPhone is the only option when it is in recovery mode. You can try resetting though: http://docs.info.apple.com/article.html?artnum=305743
You should have a backup in iTunes from the last time the iPhone was synced. Check iTunes> Preferences> Syncing. That backup will recover the pictures taken on the iPhone.]
http://docs.info.apple.com/article.html?artnum=305744
Just restore and after restoring, iTunes will ask you if you want to recover from backup or setup as a new iPhone.
Jason

Cyan update/ software recovery tool firmware

I may have already asked this question but maybe not in this way. After reading through a lot of resources and articles I have read Microsoft is suggesting everyone running the 8.1 developer preview downgrade to the commercial 8.0 firmware using the recovery tool. ( due to an issue with bitlocker,,, which I am NOT running on my phone) After looking at the firmware versions the firmware on the recovery tool is the exact same firmware already running on my phone. Is there a difference between the developer preview firmware and the firmware listed on the recovery too even though the firmware version number is the same. I really dislike resetting my phone, due to almost 6 gigs of information,, games/apps on my SD card. I know I can back up my phone which I have done several times in the last few days trying figure out if I really need to reset my phone or just wait for the cyan update an d see if it installs correctly...,,, any who thanks in advance for any replies, suggestions or comments. Have an awesome day and be great.....
russlee AKA 1badelf
Solved!
Go to Solution.

Many users who were already running the WP8.1 developer preview have received the cyan update and the process went on normally.
The problem only exists for the enterprise users who make use of bitlocker and AFAIK, general consumers are unaffected. You should be able to update normally.

How to purchase software recovery dvd

I will like to purchase the recovery dvds for a touchsmart 300-1000la desktop computer. I am unable to find the the url tp point me to the instructions for placing this order.
This question was solved.
View Solution.

Hello Dean:
           You provided the wrong link not a note book. cliveld asked for recovery disk HP Touchsmart 300-10001a . Here you are cliveld . Please check your HP Touchsmart model number again. I was un able to find what you wrote. So I am providing the the link for HP Touchsmart 300-1120 usa model http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&jumpid=hpr_r1002_usen&lang...
        I do not know what country you live in there for I could not provide you the correct link . This link is the first one listed under HP 300-1000 series. Might be helpfull.
         Here is the link for outside of USA for HP Support and Shopping  http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html   Just inter your country and ounce you are on the correct country in HP search box please type in your computers model number HP Touchsmart 300-10001a ok. It will bring up your computers web page. Thank you frrw

Software Recovery Issue

My computer has WAY too many adware and malware. I am following the steps to a factory reset on HP windows 7, but when i open the Recovery manager, i cant click the system restore button. Its like the virus wont let me remove it.
I DO NOT have a recovery disk.
the system recovery does say this:
(Disabled: Recovery Partition is Removed)
Can anyone show me steps on how to propertly recover my computer to factory settings?

Roman99, welcome to the forum.
The first thing that I recommend is running Superantispyware:
http://superantispyware.com/download.html
I use the FREE version and have for years. It will remove even difficult spyware and malware.
If this does not work, please furnish the full model of the computer. Once I have this information I will help you further.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

R&R version needed for "selective" software recovery?

The version of R&R that came on my machine is 4.0. Is it true what I've read that updating to a later version will allow a recovery to factory state however I will get the options to NOT install the bloatware e.g. Norton, MSOffice trial, etc?
If so, what version of R&R do I need for this function? I've read a number of posts that seem to be indicating the v4.2 is causing other issues and would like to know others experience.
Thanks in advance

Hi PK,
there is a sticky thread titled by 'Please read this before you start a topic'.
There are interesting statements concerning a standalone ITS. Do you have an idea
why somebody created this thread?
There is a second sticky thread titled with 'ITS FAQ...'. Also interesting - indeed.
best regards
Tobias

E55 original software recovery

Hi.
I have bought recently a new E55 (great phone) to substitute my damages N95 8GB and i have notice that after changing the original MicroSD with a new one (8Gb) and after made a new firmware install, i have lost some free programs that i want to recover. This programs are WiPresenter, Top Hits Solitaires, Ad. Com. Mgr. and another game, but i cannot find a way to install this programs and there is no option in Nokia site to download this programs as there is for E71.
What can i do?
Thanks,
Deepimpact
Solved!
Go to Solution.

Then download the ones from the E71
http://europe.nokia.com/get-support-and-software/product-support/nokia-e71/software
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I need to reboot my computer but I lost the software recovery disk.

how do i get the disk again?? Is there any way I can use my serial number to get the disk for free?

Not for free, but AppleCare will send you a replacement for a nominal fee.
But . . . what do you mean -- do you mean your Mac won't start up at all?

Software agent framework/TREX

hi friends
In CRM 5.0 if we go for indexing the system asks for the hostname and ip address of the server. we have istalled TREX on a different server. i have 2 questions:
1. as the host name and ip address are not being populated what can be the reason for that?
2. is it necessary to install TREX on the same CRM server or it can be installed on some other server and used in CRM
thanx & regards
nitin

Prevent Duplicates in BP with BAS and TREX:
To prevent duplicates from being created in transaction BP
- set up the TREX connection, indexing, and all that stuff and test it with program RS_SIC_CONFIGURATION_TEST. This works as expected.
- activate BADIs SIC_ADDRESS_SEARCH and SIC_ADDRESS_UPD_TREX
Setting up Duplicate Prevention
To use duplicate prevention, you must perform the following steps:
Index the Existing Data
Before you can use duplicate prevention for existing data, you must perform initial indexing. To do this, the system stores the attributes of the data model of the business partner that are relevant for the search in the search engine together with the content. Using the business partner data, the system checks in the search engine whether there is a possible duplicate for each newly created or modified business partner.
To start the initial indexing, start program SIC_BAS_RSADRINI (transaction SE38) with the following parameters:
Field Name     Entry
Object Type     BUT000
Object Subtype     PARTNER
Index Pool Table     BUT000
Index Pool Field     PARTNER
Service Name     NORMALIZE_INDEX
Service Profile     Profile defined in the configuration of the services
Define Settings for Duplicate Prevention
To use duplicate prevention, you must perform the following actions:
●     Search and Classification (TREX)
TREX must be fully installed and configured.
●     Search Engine Service (SES)
You must perform the following activities in SES (transaction SES_ADMIN):
u2022     ○     Enter the server for TREX (Goto ® Customizing ® System Settings).
u2022     ○     Enter the delivered index BAS_BUPA. Use CL_IC_INDEX_SES as class and make any further required settings (Goto ® Customizing ® Business Objects and Indexes).
u2022     ○     Activate index BAS_BUPA (Index ® Create/Activate Indexes). The system creates an index ID according to the naming convention of the SES in which system information is integrated in the name as well as BAS_BUPA (for example, nwt_003_bas_bupa__1).
●     Configuration of the Services
The shipped services are already fully configured. To change the configuration of the services, perform the IMG activity Information Consistency Configuration in Customizing for Information Quality Management.
●     Business Address Services (BAS)
To use BAS for duplicate prevention, you must perform the following activities under Application Specific Settings in Customizing for Information Quality Management:
u2022     ○     Activate Duplicate Check and Determine Limit for BAPIs
u2022     ○     Set Limit for Duplicate List in SAP Dialog Boxes
u2022     ○     Business Address Services (BAS) Configuration
●     Activate Business Add-Ins
Activate the given implementations for the following BAdIs (transaction SE18):
u2022     ○     BAdI ADDRESS_SEARCH implementation SIC_ADDRESS_SEARCH
u2022     ○     BAdI ADDRESS_UPD_TREX implementation SIC_ADDRESS_UPD_TREX
Please refer the following link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/551c3b99d44de2e10000000a1553f7/frameset.htm

Software Recovery Framework ?

Similar Messages

Maybe you are looking for