Software repair assistant frozen.

I ran the software repair assistant on my S III, it made it to 75%. It was at the point where it was ready to restore. I then got a message to disconnect, and reconnect the cable. I did that. It now says "Restore Galaxy S(R) III, but I can't click the button. I tells me that, If I close the assistant, I will lose everything
PLEASE HELP !!

manloz
We definitely want to make sure you can get the support and assistance you need on your device! Which make/model are you currently working on? What are you locked out of?
RuthW_VZW
Follow us on twitter @VZWSupport

Similar Messages

Software Repair Assistant

im trying to use this program ,Software Repair Assistant.
so...I have my Samsung galaxy s5 phone attached to my lap top computer.
now what? where is this program ,I cant find it , your tutorial dose not say where to find it.
this link:
http://www.verizonwireless.com/dam/support/pdf/system_update/galaxys4-srt-06-02-14.pdf
thank you!!!

thanks but still have a problem
From the AutoPlay pop up window, click Run VZW_Software_upgrade_assistant_installer.
If the AutoPlay pop up window is not available, open Windows Explorer then click CD Drive: Verizon Mobile.
I get no pop up ,and when I go to internet explorer,i find no CD Drive: Verizon Mobile

Problems for download Recording Repair Assistant

Hi, yesterday (1 September 2014) was launched an update for Jaydeep's Recording Repair Assistant, the problem is that when i go to download it, i need to login on my.adobeconnect.com and i dont have any user for login for download it.
I work with about 1000 recordings of adobe connect every week, and always we have 3 or 4 with problems with audio or video that we repair with Jaydeep's Recording Repair Assistant.
Can anyone help us with an alternative link for download the update of Jaydeep's Recording Repair Assistant?
Thank you so much.
Eduardo.

Problem was solved, the link was fixed, we dont need loguin to download the software.
Here the link to download it:
https://my.adobeconnect.com/JRRA
Bye

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Impact of enabling Calendar Repair Assistant on Exchange 2010 mailbox server

We have a couple of iPhone users reported they were having calendar items disappear from their calendars. Many suggest to enable Calendar Repair Assistant for those users on mailbox servers. We are running Exchange 2010 SP2 RU7. Do
you know if there's any impact like performance when enabling Calendar Repair Assistant ? What's your best practice? Thanks in Advance !!
This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Hi,
The Calendar Repair Assistant is used to detect and correct inconsistencies with single and recurring meeting items for mailboxes located on the Mailbox server. Then recipients won't miss meeting announcements or have unreliable meeting information. Based
on my knowledge, there is no official article mentioning that enabling Calendar Repair Assistant has an impact on performance.
Hope my clarification can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Software upgrade assistant launches IE

Please help! Everytime I plug my phone into my computer, the Verizon Software Upgrade Assistant starts Microsoft's Internet Explorer and loads a verizon web page. I can't find any way to stop this from happening. I don't use IE because it's too great a security risk. I don't appreciate Verizon malware loading this program without my permission. I also don't need and don't want to see Verizon's web page everytime I plug in my phone. I tried removing the Software Upgrade Assistant, but then I get the "Software available for your phone" pop-up instead. How can I prevent my system from starting IE everytime I plug in my phone?

Bearone21,
      Thanks for your message. My PC still connects to the internet
just fine, but everytime I plug the phone into the USB port, the new
software launches Internet Explorer (on the PC) and loads Verizon's
Consumer Products web page. There are two problems with that. First, I
don't use Internet Explorer because of it's inherent security risks and
I don't want it running on my machine. Second, I don't care to be
spammed with the Verizon Consumer Products page every time I plug my
phone in to sync it or charge it (several times a day). I was hoping
there was an option to turn this "feature" off. A simple options menu
box that would let me choose between "on connect launch browser." and
"on connect do nothing" would be sufficient. I've reviewed all the
options and this choice doesn't appear to be available, hence my question.
      Note that this never happened until I did the 4.3 upgrade, so I
have to assume it is another one of the several defects in the upgrade
package. There are a couple of simple ways to fix this defect. The
first, and best way, is for the software to give me the option to
launch, or not launch Verizon's consumer products web page on USB
connect. That would solve the problem completely. Failing that, the
Verizon software should use the system default browser instead of
launching IE. That might still be annoying, but at least it would
resolve the security problem.
      I appreciate your response to my inquiry and hope that Verizon and
Samsung will continue working together to fix the many problems with the
4.3 upgrade. Hopefully Verizon will recognize that the browser market
has changed and IE users account for less than 23% of the browser market
today (see http://en.wikipedia.org/wiki/Browser_wars). Verizon needs to
adapt to the new browser climate and stop writing software that is
dependent on IE.
               Thanks again,
Dave *
>>Personal information removed to comply with the Verizon Wireless Terms of Service<<
Message was edited by: Verizon Moderator

Software Upgrade Assistant

I can't install the Software Upgrade Assistant via the instructions in the LG support site. Is there a direct download link for the LG Verizon Wireless Software Upgrade Assistant?

Verizon Wireless Software upgrade assistant Tool [LG G2]
Should work for G3 as well.

Zerizon Wireless Software Update Assistant

I have installed Zerizon's Software Update Assistant for my LG Revere Basic Phone. I have downloaded and install updates when I'm told there is an update for my VN150 with no problem but this morning I got and update notice and hooked my wireless up to download. It started to download and then if froze. Now all I can get is the white screen with the Verizon Logo, the LG Logo and the message: Downloading...Do not unplug
I've tried unplugging, restarting and taken the battery out and re-inserting. It goes back the that screen. I can't turn it off or anything.

Hi roperdoug,
I trust that your wireless phone issue has been resolved by now. Unplugging your phone and removing the battery for 30 seconds will most likely allow you to power on again. If you continue to experience the same software update issue, please do a Master Reset http://goo.gl/ucqOD and then attempt to update your device.
Let us know if this resolves your concerns.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/vzwsupport

Software repair fixed issues after 5.1.1 update

After getting the 5.1.1 OTA the other day, I was getting some serious jankiness in most apps, and even in the base OS UI. For example, web pages in Chrome would jump around without even touching the screen. It was to the point where using the phone was getting really frustrating. I was surprised not to find anyone else posting about a similar issue, but to most of the other issues, the recommendation from Sony has been "software repair" through PC Companion. I just wanted to say that running a software repair on my Z3C completely fixed my problem.

Actually, my pronouncement was premature... although the repair does seem to have improved the battery life quite a bit, so still reccomended! It seems like the issue crops up most often, or maybe exclusively, while I'm walking. I've turned off auto-rotate, but it'll take some time before I can be sure that's the culprit.

Updated software and phone frozen

updated software 4 hours ago and phone is frozen with white screen and black apple.
not sure what to do, cannot remove battery on iphone 6 plus.

Same thing happened to me, except I have the 6. I just got the phone, not more than two weeks ago. I decided to update to iOS 8.2 just to have the most recent software, and I was fine for a few days. Like I said, I just got the phone so I'm fooling with it, looking through my facetime application. I then get this notification that says something about a failure, and facetime closes, and it goes directly to the white screen with the black apple logo. Now, everytime I unlock my phone, it goes directly to that screen. I can't even use my brand new phone!!!!!!!!!!!!!!!!!!!!! I tried resetting it and all of the above. I visited my sprint repair center and the lady tried to hard reset it through iTunes and it wouldn't even go into reset mode with iTunes, so I have to order a whole new phone smh

Detailed Software Repair Instructions using Pc Companion(Win)or Bridge for MAC. (Update 8/5/2014)

We have an extended guide that should help you repair the system of your phone. This instructions are valid for all Android based units and for some legacy Sony Ericsson models(The list of phones that can be used with the application is displayed in Step 9 of the process). please follow the instructions carefully: Turn the phone off and disconnect it from the computer. 1. Visit this link:http://www.sonymobile.com/us/tools/pc-companion/Click on Download PC companion2.Run the software After the installation the first screen will show you the PC Companion Startup Guide which gives you a brief explanation on the main modules of PC companion (Support Zone, Xperia Transfer, Contact setup and Media Go) Keep clicking next.3.Now you will see the screen with the different modules.Select Support Zone> Click Start. The program will download the module. Then click on start on Phone/Tablet Software update. (Here you can choose to update an accessory, go to step 14 for instructions) Note: At this point if you get an error stating that "unable to install update components" or "server is busy" Please proceed to step 13 . If you not see that error then continue with step 4.
4. The program will show a window saying "could not find phone/Tablet” Do not Connect phone instead select Repair my phone/tablet. This will bring you to a window with a warning that says "data will be lost" (do you want to continue) Select to continue (Data in the phone will be deleted, only data in the SD card will remain. Make sure you have done all proper backups if possible)6. The program will issue a second warning stating that “data saved in the phone /tablet will be overwritten during the update of your phone”. Click on the checkmark box next to the acceptance text and select Next to continue.7. Next the computer will download the necessary files (Prepare stage, this can take several minutes depending on the speed of your connection) and then its done it will show you a list of recommendations for a successful update operation. When you are done reading this section click on the checkmark box and press Continue8. Next you will get a Battery level warning that states that your phone should have at least 80% battery. (If the issue in the phone does not permit the unit from turning on, then charge it connected to the wall charger for at least 2 hours and then comeback to this step) Then click on the checkmark and select Next9. Choose the Phone from the list then click on "next" then you will see a new section telling you how to connect the phone. (don't connect it yet) Again, at this point the phone must be off and disconnected from the PC. 10.. Connect the cable to the PC not to the phone, then while pressing and holding the indicated button (in the steps on screen an specific button will be shown for you to press on the phone) connect the cable to the phone and keep holding the indicated button until the program says "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.) 11. If you failed to follow the steps correctly the phone will turn on. If this happens disconnect the phone from the cable, turn it off and repeat from step 10). 12. If the phone is connected properly, PC Companion will proceed with the update ( It will tell you to let go of the key) then wait for the update to finish and follow instructions on screen to disconnect the unit. End of process. ----------------------------------------------------------------------If the software fails to install:13. If "unable to install update components" 1. Close Pc companion 2. Install Java from: http://www.java.com 3. start Pc companion again and try to do the software unlock process once more. 14.Select Accessories software update. Click on start and the computer will download the necessary files (Prepare Stage) it will take several minutes. Then follow the instructions from step 8. Note: Some computers may block the installation of the update service, if this happens use this:http://www.sonymobile.com/us/tools/update-service/ this is the Standalone update software. (Not globally available)If the Phone is unresponsive (Then do this extra step and when done proceed to redo the repair process:Press and hold the power button and the volume up button at the same time for 10 to 15 seconds. This will reset the unit)Note: This procedure does not work for the Xperia Play R800x (Verizon and other Non SIM card variants of the Xperia play that lack MTP support. It does work for the R800a At&t's model)Bridge For Mac instructions on my post below. Valid for all Android based units and most java Sony Ericsson units.

Here are the basic Steps for Bridge for MAC.Download Bridge for MAC from:http://www.sonymobile.com/gb/tools/bridge-for-mac/The phone should not be connected to the MAC.
The phone should be off.After the Download unzip the file and drag the bridge for MAC icon to the Applications folder. (install then use finder to locate icon)In the Main "No phone connected" window, on the top menu (top application menu) Select "Phone" and scroll down to "Repair phone"
This will open the Phone Software Restore window with the 3 sections for Start, Prepare and Update.
Click on continue bellow. Doing so will popup a window warning you about the loss of your personal info. Click on the checkmark signaling that you understand the data loss situation,
This will take you to the Connection Procedure Screen. Follow the instructions in the screen and click on continue*.
*One key aspect of the last step to keep holding the indicated button before and after you connect the phone to the MAC until the update starts. IF this is not done correctly then the phone won't connect to the MAC

Im trying to install new version of itunes in my macbook but its always failed .i can download but cannot install says to contact with software manufacturer assistance....please solve my problem because of this i couldnt connect my iphone to my mac.....

im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....

Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to  > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com

Windows Installer Source and software repair

Hi everyone, I am looking at how the Windows Installer Source Location should work on SCCM 2012 R2.
Here is my problem:
We are using a Powershell wrapper to install all the software we have. When creating a new application, we are setting the MSI product code so that if the application have to be repaired, the msiexec will then launch the installer at the right place, which
is under the content of the DP.
The structure is really simple, we have an EXE, a powershell script and some folder at the root of the content. All the required files are under the File folder, one step lower. This is what it look like.
\\Server\Share\Software
Files: Files are in there
Support
Tools
Powershell Script
EXE File
So when specifying the correct MSI file to repair the software we are pointing to
\\Server\Share\Software\Files\MSIFile.
When configuring the installation, we are pointing to
\\Server\Share\Software\PowershellScript.
When we are launching a repair for a software, msiexec is not able to find the correct path on the DP. After taking a closer look at the path we noticed that it is stopping at the root of the content, it is not trying to launch the MSI in the File folder.
I was concern about why the structure is not kept when initiating a repair.
I was in the idea that the general path was kept in SCCM to make sure that it will remain when installing the application so that when launching the repair it will look at
http://Server/Content/Software/Files/MSIFile.
In my case it is stopping at http://Server/Content/Software.
But when launching the repair with the software still in the cache folder, the repair is able to happen without any problem.
Any idea of why does it behave like this?
I know it is not easy to understand, so if there is any question, please ask!
Mathieu

When trying the repair process, the url in the registry (HKLM\Software\Classes\Installer\Classes\GUID ID\SourceList\URL) SCCM is looking at stop at http://Server/Content/Software.
The files are located in http://Server/Content/Software/Files.
To be able to repair the software, I must manually add the /Files to be able to repair the software.
So basically, when hitting the repair button from Add/Remove Programs:
There is a prompt asking me to select the path to the MSI.
When selecting the URL path, it fail.
When choosing the URL path again and adding /Files, it work
When configuring the path to the MSI in the SCCM console, the MSI file selected is under the Files folder.

Migration assistant frozen

Got my new iMac yesterday and hooked up to start migration assistant (via wifi) from my Mountain Lion MacBook Pro. Last night it was saying it would take 18 hours, but this morning 19 hours. So, I decided to stop it. The MacBook seemed to break out fine, but the iMac was frozen on the screen showing 19 hours to go. I would now like to restart the migration process, hard wired to my Time Machine back up via USB, but am worried about how to get the iMac back to a position where I can restart the whole set up. Can I Command-Q out of the migration assistant? If that doesn't work, can I switch off and then what do I do to start over? Thanks!

Power down, using the button in back, restart, CMD+R, launch Disk Utility, erase the HD, quit DU, reinstall the OS, and, on first boot, restore from the MBP (should be faster than mucking with the TM backup), following the steps in Pondini's Setup New Mac guide.

Dowload assistant frozen

downloading Master collection onto mac book pro and download assistant stuck on extracting for 5 hrs

Try again using another browser or use this method:
Direct Download Links for Adobe Software
Mount and open the downloaded image manually then and run the install app.
Mylenium

Software repair assistant frozen.

Similar Messages

Maybe you are looking for