Software synth patch help

Does anyone have a simple way of getting a good "falling pitch" analog sound using the software synths included with Logic Studio 9?
I am starting to do a lot more project studio work and programming of cover songs, and although it's hard to relay the sound I'm looking for in words, the best examples for the sound I am looking to create is audible in No Doubt's Hella Good & more recently in Kesha's Tik Tok. For lack of better reference, it's reminiscent of a "cartoon space gun" where the pitch drops off at an adjustable rate.
Any suggestions, help, advice, etc would be greatly appreciated.
Thanks!

Basically, you just want a pitch envelope to make the pitch do what you want on the attack, decay or release.
The ES synths have routable envelopes, so you can route any of them to pitch and do what you want.

Similar Messages

  • Software Synths

    How do you record software synths with garageband. i just got Fab Filter Twin 2 off the mac app store (which is a sick deal for only 30 bucks, a lot of great sounds, and a really user freindly and intuitive interface, deff check it out). i want to record with it though on some of the stuff on working on, and i have no idea how to, or if its even possible. any help would be appreciated
    mo t

    Since this seems to be a standalone software, you can't use it within GB. There's software ways to record it: AudioHijack and WireTap will allow you to record the program's sound into a sound file, you can do that even while GB is running. Or you try Soundflower, an application that lets you route the program's sound into GB.

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • Using a second computer as a software synth

    Hi Folks
    I'm just thinking of running an old computer as a software synth and was wondering what I would need, i.e. midi interface, sound card and any advice that could be give so that I can sync the two machines up and get them working.
    TTFN
    Lotus Eater

    Hi
    Several ways, some more complicated to setup than others!
    Basically, you either need to run the Plugins in Standalone mode or use some kind of host software.
    You will definitely want to check out Vienna Ensemble Pro:
    http://vsl.co.at/en/65/71/1738/1356.vsl
    MIDI and audio transmitted via gigabit Ethernet.
    HTH
    CCT

  • The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do?

    The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do? When i go to the camera, it is stuck on a black screen. the only way to use my camera is through other camera apps, but if I try to switch it to the front camera, it freezes again.

    If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required.  You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

  • My Iphone 4s is not being recognized by itunes at all. There is no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

    My Ihone 4s is not being recognized by Itunes.There seems to be  no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

    Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

  • I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

    I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!

    Nobody can help you with at least some system information....
    Mylenium

  • How can i get ios 7 in my ipad 2? i have tried to update it but in my setting general there is no icon for software update.so help me please!

    how can i get ios 7 in my ipad 2? i have tried to update it but in my setting>general there is no icon for software update.so help me please!

    If you are using iOS 4 (or earlier) there is no Software Update in Settings. That feature was first added in iOS 5.
    To update you will have to connect your iPad to iTunes on a computer (preferably the one you sync with and backup to).
    See here: http://support.apple.com/kb/HT4972

  • I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?

    I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
    The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
    I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
    My dj mixer works on another mac computer with the same soundcard and different firewire cable.
    Hope someone can help
    Thanks
    Wayne

    kmiddlet88,
    yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

  • Software Distribution & Patching Design Issues - Migration of Packages SCCM 2007 to Application or Conventional Packages in SCCM 2012

    Hi All
    I am starting in discussion to deep root on Software Distribution & Patching model in large environments from SCCM 2007 migrating to SCCM 2012.
    Below are certain assertions i am putting forward for your expert views or you may in a similar situation
    1- I have migrated the packages from SCCM 2007 to SCCM 2012 as conventional methods, now i am deploying them [ not migrated the advertisements and collections ], so while deploying i am facing a peculiar situation that the deployment when created is of the
    name "<<Package name>>(program)". I am not able to rename the deployment for the conventional packages. is there a way out to that??
    2- Will the collection queries work the same in SCCM 2012 as was in SCCM 2007??
    3- In SCCM 2012 Primary site there is default role called Site System role in that there is tab for proxy settings. I have observed that if do not check the proxy tab there and punch in proxy IP and port then after some time in the WSUS server the update
    source and proxy server tab the proxy option gets unchecked and hence the sync in software update point status appears failed. Is that anyone else also has observed !!!!!
    Regards Sushain KApoor

    This is a duplicate of
    https://social.technet.microsoft.com/Forums/en-US/2ddb8170-529b-4652-830e-fd0ade384b98/software-distribution-patching?forum=configmanagermigration
    Please do not double post.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software. Please help me.

    There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software.
    Please help me.

    Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
    As to your issue, Apple does not and never has made a wristwatch as such. The only thing close to a watch that they have made was the 6th-generation iPod nano:
    http://support.apple.com/kb/ht1353#iPod_Nano_6G
    which has a clock feature and which some people have worn as a wristwatch. Is that what you mean?
    Message was edited by: varjak paw

  • Software synth output disappears and won't come back

    On every song I work at some moment one of the software synths stops. The tackactivity meter moves, but the audio output dropped dead. The only way to get the sound back is to quit logic and start logic again. The behavior is random; it can happen to any softwaresynth at any moment. Any possible causes?
    Thanks
    Budy

    This hideous bug bites me on average at least once per session.
    The best part? Doing a bounce to find that killer pad swell in measure 73 is missing because of a dead instrument. (Hope you catch that before it's off to reproduction!)
    This really needs to be fixed ASAFP, and is inexcusable for a Pro app.
    (I read someone's post about a possible workaround, though it's never worked for me: the next time this happens, leave to song open and go to open another song. When it asks to "Close current song", cancel the entire action (taking you back to the original song). Allegedly the instrument should work once again, but it hasn't ever for me. A restart of Logic is the only thing that works. >:-[

  • I need to retouch images of silver jewelry, is lightroom the software that can help me?

    I need to retouch images of silver jewelry, is lightroom the software that can help me?

    It depends on what “retouching” means.  If you mean doing image-wide adjustments making things brighter and darker or changing the color-cast across the entire image then LR is ok for that.  If it is about changing smaller areas of pixels, colorizing or cloning in other details, otherwise pushing pixels around, which is what I’d call retouching, then that’s a Photoshop operation.

  • Is it possible to use a third party software synth to record tracks in GB3?

    I bought a Korg K49 MIDI keyboard to use with the software instruments in GB3. It came bundled with the M1Le synth software, which I installed on my Mac. Is it possible to use the M1 software synth to record tracks in GB3, and if so how?

    I imported three different softsynths on my Intel iMac. They were all AU plugins, and deleverd as Uninversal Binaries. They are all great sounding syths, and completely free! The sytnhs are: Zoyd (mono-timbral, but "fat" sounds), Crystal (multi-timbral, many many knobs and sliders) and Automat. I made reviews on them on my website, but they are in Dutch. There al links on my pages to the websites where you can download them. I made some audio-samples, which you can hear on http://homepage.mac.com/videoholiday/.Public/Muziek/u_he_zoyddemo.mp3 (Zoyd) and http://homepage.mac.com/video_holiday/.Public/Muziek/Preset34%20en%2086.mp3 (Crystal). Please let me hear if you like them.

  • I want to install the latest version of i tunes. I recieve an error that the MSI file is missing. It won't load the new version and I can not delete the software either. HELP!

    I have a windows computer running xp. I can not load the latest version of I tunes. I receive an error message that the 'msi" file can not be found. I can not delete I tunes for the same reason.
    HELP

    ItIt is the the ituens msi file
    From: Apple Support Communities Updates
    [email protected]
    Sent: Monday, February 27, 2012 3:40 PM
    To: escow 39
    Subject: - Re: I want to install the latest version of
    i tunes. I recieve an error that the MSI file is missing. It won't load the
    new version and I can not delete the software either. HELP!
      <http://images.apple.com/support/images/emails/apple_logo_gray.gif>
    <https://discussions.apple.com/index.jspa> Apple Support Communities
    Re: I want to install the latest version of i tunes. I recieve an error that
    the MSI file is missing. It won't load the new version and I can not delete
    the software either. HELP!
    created by b noir <https://discussions.apple.com/people/b+noir>  in iTunes
    for Windows - View the full discussion
    <https://discussions.apple.com/message/17708214?ac_cid=142432#17708214

Maybe you are looking for