Software that converts? NTSC to PAL

Is there a software where a video that was shot on NTSC format be converted into PAL to play overseas?
thanks

Although the suggestions given by the posters are valid, if you are doing the conversion for broadcast you may have difficulty passing QC if you use these software converters. I know that I have.
The most reliable way of converting for broadcast and getting through QC is to go through a Terranex converter - a process which is available at your friendly local video facility. It costs me about $250 per hour for HD to PAL HDCAM (excluding tape stock).
Best
Harry

Similar Messages

Converting NTSC to PAL with chapter markers

Hey guys,
I have just a quick question.
I am making a home made video. I did all the editing in FCP and made a great DVD in iDVD. I would like to do the same thing in PAL format so I can send it to my parents in Europe. My original footage is in NTSC. I did my own research and tried using compressor to change format to PAL.
I tried several different settings (PAL DV, Mpeg 2 PAL) but the outcome movie is always missing chapter markers.
I also tried to import the PAL movie (after conversion in Compressor) to FCP and added chapter markers but did not work.
Does anybody know how to convert the format from NTSC to PAL and keep the chapter markers at the same time? I would like to mantain as high quality as possible.
Thanks for your help.
iMac G5 Intel Core Duo Mac OS X (10.4.8)
iMac G5 Intel Core Duo Mac OS X (10.4.8)

Well, this seemed to work. However, being completely new to converting to PAL, I was surprised to see the "jumpiness" that goes along with the frame rate drop. Looking at it taxes the eyes as it seems like its dropping frames every so often. I realize, through more research that this is due to the 25 FPS nature of PAL plus the fact that I'm converting and not just authoring from PAL material. Having said this, is there a tried and true way of "smoothing" this jumpiness that anyone would share?
A friend of mine suggested that when I place the file into DVDSP, I choose the TOP field in the encoding tab, prior to burning the disk. In the past I have always left the FIELD menu set at Auto. He says that setting it to TOP might help a little.
He also told me that a lot of the software based converters don't do the best of jobs. Although acceptable results may come from tweaking the settings, the best way to convert NTSC to PAL (with the most pleasing results) is by using a very high end converter (not a computer). Although you have to weigh out the circumstances such as how many disks will eventually be converted compared to available budget, is it worth spending a little extra for a master that will ultimately see 1,000 copies?
I'm planning on showing my client the burn with field dominance set to TOP, on Monday. Hopefully she'll find it acceptable and I'll be able to move on with this project. Thanks for all the help!
Steve
Power Mac, G5 Mac OS X (10.4.6)

Workflow for converting NTSC to PAL with Premiere/AME

Hi everyone,
After searching the forums, I see that to convert NTSC to PAL for standard def DVD, most recommend using Canopus Procoder software for the MPEG2 encoding, or using a hardware based solution. I don't have the money for those options, so I was hoping you could clear up something for me. Which of these options is best?:
Option #1: import the NTSC footage into Premiere and edit on a NTSC timeline with settings matching the original footage. Then use Adobe Media Encoder to encode a PAL format MPEG2 file for the standard def DVD.
Option #2: import the NTSC footage into Premiere and edit on a timeline set up with PAL resolution and framerate settings, and simply scale up the NTSC footage to match the larger PAL resolution. Then use Adobe Media Encoder to encode a PAL format MPEG2 file for the standard def DVD.
Thanks for the help!!
Mike
Intel i7-930 2.8GHz
12 GB RAM
1 GB VRAM
Adobe CS 5

pal to ntsc is not quite the same as ntsc to pal.
pal has more scanlines and there for makes a better end result to ntsc than ntsc to pal.
Usually ntsc converted to pal does not look very good on a tv.
That's why i recommend to leave it in ntsc, most pal players can be switched to ntsc.

Does anyone know of software that converts LaTex and rtf files to doc?

Hi All:
I edit documents for PhD candidates in economics. As these documents generally contain a lot of symbols, the authors use LaTex, which they sometimes convert to rtf. I prefer to edit using word and track changes. In fact, that's the only way I know how to do this. So I am wondering if anyone knows of software that converts LaTex and/or rtf files to doc files.
Thanks so much,
Lunenburger

Bean can do this:
http://www.bean-osx.com/Bean.html
and I am sure that Word accepts rtf documents as well.
There is a version of LaTex for Macs:
http://evolve.lse.ac.uk/software/EquationEditor/
(scroll down).

Converting NTSC to PAL without dropping frames... possible?

Hi Guys,
I am trying to convert some footage from NTSC to PAL in FCP, now I have managed to do it in a way that stops the image being distorted but I have yet to find a way to convert without getting slightly noticeable jumping (which I can only assume is down to the 4/5 dropped frames). Is there any way of doing so or does the footage need to be sent off to a specialist?
Cheers!

Get Nattress Standards Converter. It really is the best way to go. Very quick and with fantasic results.
In that thread that Bogie indicated, it took me 30 min to capture and convert the footage...this with 15 min of material ( I used 10 seconds)
Shane
"There's no need to fear, UNDERDOG is here!"

Converting NTSC to PAL?

I made a video, NTSC all around. Quicktimes made in After Effects. Edited the Quicktimes in FCP. Made the DVD in DVD Studio Pro.
Now I have to send a ccopy of the DVD to someone in Australia.
Is there an easy way to convert this to PAL?

Guys: I used to recomend JES too. But... let's see: The assets JES Deinterlacer has are: 1) it's free 2) it's really fast.
The free part is amazing. But if you already paid for DVD SP/FCS/DVD SP that advantage doesn't really matter, right?
Let me modestly shed some light about Compressor 2's amazing, high tech conversion capabilities.
It basically has three conversion ceilings:
1) Frame controls OFF: pure destruction, like any non conversion enabled video application.
2) Frame controls set to Custom and Frame rate conversion set to Frame blending. Just as good and fast as JES Deinterlacer, but with all the added functionality built into Compressor. Including image post-processing, chapter markers, cluster rendering, etc.
3) Frame controls set to Custom and Frame Rate conversion set to Motion Compensated or High Quality Motion Compensated: Conversion quality here is second to no other sofware application, really approaching hardware level conversions. The results prduced by the high tech, Optical Flow approach is stunning. And it's not just PAL NTSC. It can do beautiful HD up or downconversions, and progressive interlaced (the frame size and field parameters in Frame controls are the key for those...).
Yes, it may take days to do all of this, but for special cases that are worth it (or short pieces) it's amazing. And, of course, you have now the Quad core Mac Pro, and/or distributed encoding among different Macs that you may already own. This may make a conversion go from a couple of days to a few hours.
Don't take my word. Go and try the different transcoding settings I mentioned.
Finally, while Compressor will transcode standards and do MPEG-2 encoding in a single job, that's completely unpractical. A 2 pass VBR will take twice as long to transcode. The best workflow is to first transcode, then encode.
Hope this helps.
Adolfo Rozenfeld
Buenos Aires - Argentina
Power Mac G5 Dual 1.8 Ghz (PCI-X) | MacBook Pro 2.0 Mac OS X (10.4.7) 2 GB RAM, ATI Radeon 9600 (G5) | X1600 256 MB (MBP)

Professional video conversion software that converts .mov to OGG Theora and/or WebM?

I'm looking for a professional grade video conversion software that can convert Quicktime (.mov) files to HTML5 video formats such as Ogg Theora and WebM. There are tons of free ones but I haven't found one that does a very good job. I've tried Bigasoft's converters but I'm a bit disappointed with their very basic quality settings. I'd like to have more control over parameters such as bitrates, variable passes, etc. Does anyone know of something like this? It's also hard to trust if some of the converters out there are legit.
Thanks!

I just found out about Firefogg and it seems to be working well enough for my immediate needs. Still curious to see if there is anything better out there though.

Convert ntsc to pal

I want to export my i.phone and Flip videos from i.movie to i.DVD but when I play back the DVD the video is 'jerky'. (They play great in i.Movie) I assume that there is a problem with the frame rate difference, 30 frames imported but I need 25 frames to burn a PAL DVD. Any ideas on how to convert would be appreciated,
Thanks, Ken

Your "PAL" DVD player shouldn't have any trouble playing the higher frame rate of NTSC DVD's.
Don't worry about the frame rate or set your phone to record as PAL format.

Converting NTSC to PAL in CS5, the audio is out of sync-too slow. What do I need to adjust?

Hi. I had to purchase a new Sony video camera in USA (NTSC 29.9fps). We are PAL, so most of my holiday movie is PAL 16:9 widescreen. When I imported the clips from the NTSC camera, I converted the clips to PAL 25fps but the audio is out of sync and appears to be too slow. eg. a male voice is high pitched and not quite audible. Is it the 'bit rate' difference causing the problem and if so, how do I change that in CS5? The PAL clips off my old camera are imported as MPG files. The new camera files are MTS. I am not sure if this is important but would appreciate some help. Thanks.

Adobe doesn't have any tools that perform adequate NTSC<=>PAL conversions, in my view. You may be better off creating a separate video for the NTSC stuff, keeping it as NTSC. Your player should be able to handle it fine.

Converting NTSC to PAL, 720x540?

Another conversion question...
I'm authoring an old movie that seems to be 720x540 NTSC 29,970 (for some reason MediaInfo think it's 720x480 but it doesn't look like it when i watch it on my computer). It's going to be distributed around Europe so my question is: do i need to convert the sucker into PAL (and in that case how do i do that?) or do all DVD players play NTSC nowadays? What would you have done?

Ok, cool! Is that so even for people with say a 5 year old dvd player? I've noticed that dvd stores print warnings about NTSC DVD's.

Converting ntsc to pal using sonyzu1 to sonyfx1e

hi,i have a job ,all tapes in ntsc,i need the final edit to be pal,
does anyone know if i can convert the tapes,playing them on the z-1,connecting through a firewire to a fx1.
or should i do the project with the ntsc settings in fcp and print the final edit to tape then get a conversion job done at a company?
any help appreciated
cheers
simon

startchoppin,
It seems like your question was answered. Now is the time to award points to your benefactor and mark the thread "Answered".
New Discussions Responses
The new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the helpful tag and the post that provided your answer with the "star", "solved" tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
LM
PBG4 17", 1.67 GHz, 2 GB RAM Mac OS X (10.4.6) Tiger 4.7, 4 external hard drives (2 Seagates @ 350 + GB), 3 firewire. 1 USB
PBG4 17", 1.67 GHz, 2 GB RAM Mac OS X (10.4.6) Tiger 4.7, 4 external hard drives (2 Seagates @ 350 + GB), 3 firewire. 1 USB

Is it possible to convert NTSC to PAL......

on a Mac that is. I made the mistake of buying an NTSC only camcorder through Ebay and whilst I have no problem playing it through my multiregion DVD player I wondered about making DVDs I could give to friends / family who may have region 2 players only.Any suggestions ?

Hi don,
first of all: don't mix region codes and video standards - your Mac creates rc0, they play anywhere.
NTSC dvd-players can not handle PAL, but most/all PAL dvd-players accept NTSC - but not every TVset "understands" the non-standard signals coming form the player => loss of audio and/or b&w pic.....
you have two options:
* your Mac doesn't care for video standards, so simply use the iApps; in iDVD you can "switch" the video standard, BUT the converter within QT doesn't show a very good quality... so:
* after finishing your iM project, export as QT Full Quality; get for free JES Deinterlacer; it has a conversion option and uses a much better algorithm (besides: choosing the deinterlacing feature adds some "movie feeling" to your projects, in case you like that....)
you drag'n drop the PAL version into iDVD (which, as said, doesn't care for standards..) and create your disk
besides: your Mac plays back these PAL disks.....
last word: NTSC has a much smaller pic resolution... NTSC=>PAL means loss of quality....... ebay again?

Converting ntsc to pal-sound

hey there,
i work on a program where half of the episodes is in ntsc and the other in pal.
to be able to broadcast it (in germany), it has to be converted into pal. we get this done by a local post facility.
so the picture will (hopefully!!) not be a problem.
but now i have to set up a timeline in pal for the converted cut and somehow get my mixed audio tracks
in there too. i have 4 tracks for the original clipsounds (sorry don't know what you call this in english),
2 tracks for voice over and 4 tracks for music. pretty standard i guess.
whats the best way to do this. i was told, the converted pal video will have the same length than the original ntsc cut.
the cut is 29:03:24
as i need the sound cut in my new pal sequence, the only way i can think of is to copy and paste it from the ntsc sequence
into a new pal sequence. but that doesn't seem to be right. the total length has changed to 29:02:01 and there are 1 frame gaps
here and there. although the music tracks don't seem to be affected by that, (i guess because they don't really have a framerate??)
but it's still a mess and to short.
i get the converted video tomorrow and i have to process it really quick. so if it's true that the total length will not change, then i have
a real big problem because my sound will be to short and i have 1 frame gaps that i have to fill up!
now i hope that you people can tell me how to fix it!?!
pleeaase, i am not familiar with this 29,97 drop frame stuff!!!
thanks a lot.
andy

i tried that. it's actually the same result (lengthwise) you get, when you export an AIFF straight out
of FCP. but interessting enough, the file is still 5 frames shorter!
but anyway, i was hoping to get my actual sound edit into the new pal timeline, as i have to still
fiddle arround with it - insert VOs, dip music, create clean feeds and stuff like that.
so i basically need my sound edit with all tracks and clips in it, in a pal sequence, in sync with the converted video. :-)
is that possible?? does an OMF do that job? i know FCP can't open OMFs, but it sounds so right...
thanks for your help.
my sequence settings by the way are DV NTSC 29,97fps 720x480
sorry didn't get what you mean with the last sentence
andy

So I converted NTSC to PAL using nattress, but DVD issue now. Please read

So with Shanes help last night I managed to make the .mov PAL formatted. Now I went into DVD Studio Pro made my menus made sure it was PAL ready and started the burn process.
Yet it failed and the reason that DVD said is " Final PAL (Video):Invalid Video Asset"
Can anyone help me burn a proper PAL DVD?
Thanks

You might post at the DVDSP forum, too, but please return here if you get a helpful answer and close the thread.
I've never tried to do PAL, sorry, but I do know that DVDSP must be set up to work in PAL before you can use PAL assets. That, of course, is all in the manual.
Hope you get better advice.
bogiesan

Any tutorials on converting HD NTSC to PAL?

I have footage that was shot on a JVC camera, saved in a FCP file on a DVD disc. I was able to load the footage from the DVD onto the FCP timeline.
How can I covert it to PAL?
I have tried to understand the posts in this forum but everything is in bits and pieces. Are there any step-by-step instructions or tutorials available any where? Or is this process done by purchasing more software?
I have a Mac OS X, 4 x 2.5 GHz PowerPC G5.
Any hope?

You can convert NTSC to PAL using Compressor.
Other alternatives for standards conversion:
[JES Deinterlacer|http://www.xs4all.nl/~jeschot/home.html] -decent quality and free.
[Natress Standards Conversion|http://www.nattress.com/Products/standardsconversion/standardsconver sion.htm] -great quality, costs $100.
Or.... Take the original to a production facility that has either a Terranex or Snell & Wilcox converter. This will cost money so shop around. But you will get excellent results and it is real time, the other methods all take a very long time, even with a powerful high end Mac.

Software that converts? NTSC to PAL

Similar Messages

Maybe you are looking for