Software that replaces Tunatic song identification

I used to use Tunatic to identify songs i did not know streaming, or some stray mp3 file. But Tunatic was PPC and doesnt run anymore.
Do you know of OSX software that identifies songs?
I wonder what happened to the identification database that Tunalyzer (the contributor) built?

The answer turned up on MacOSX.com

Similar Messages

Any third party software that replaces SecMon and IDS-MC

I am looking for any third party software that may replace SecMon and IDS-MC. We have had so many issues with it that it is time to find a solution by looking for another vendor to manage Cisco's NID's. If anyone has had any luck please let me know.

CWSIM is another tool that you can use to get log messages out of sensor. for management purposes if you have a few sensors then you can use IDS device manager.

An older style Ipod has over 10,000 songs on it. The original computer that contained these songs on itunes has since been replaced. Can itunes/match get the songs from this ipod to store in match and then put on new computer/itunes?

Can this new service of itunes/match allow you to retrieve songs from an older style ipod, store them in match, and then download them onto a new computer/itunes? The original computer that contained these songs has since been replaced b/c it broke down. There were alot of songs on there and now I can't get the songs onto my new computer. Can match work from ipod > match > computer?

sharwilly wrote:
Can this new service of itunes/match allow you to retrieve songs from an older style ipod
Only if it is an iPod touch that you can turn on iTunes Match.
The original computer that contained these songs has since been replaced b/c it broke down.
Did you make a backup of all the important files on this computer before it broke down?
Try this -> http://www.yamipod.com/main/modules/home/
Then backup your computer after you recover the items.

Here goes. My iPod touch has all my songs on it. I have changed computers several times and iTunes has a library of similar but not as many songs as iPod. When I plug iPod in ans go to sync it says that iTunes library will replace iPod songs.

Here goes. My iPod touch has all my songs on it. I have changed computers several times and iTunes has a library of similar but not as many songs as iPod. When I plug iPod in ans go to sync it says that iTunes library will replace iPod songs. I don't want this to happen I want the I pod songs to sync with iTunes. What do I do?

That really does not work since music is not included in the backup. See:
iTunes: About iOS backups
puttly123 wrote:
backup your ipod. then sync your ipod to the computer, then restore your ipod and it will still have the right songs. its exactly what i had to do with mine.

I've just replaced my computer and now need to reinstall Dreamweaver. I can't for the life of me find anywhere on Adobe's site to download it again. What steps do I take to download and reinstall software that I pay for monthly?

I've just replaced my computer and now need to reinstall Dreamweaver. I can't for the life of me find anywhere on Adobe's site to download it again. What steps do I take to download and reinstall software that I pay for monthly?

Download/install the desktop application, sign in, install the subscription application(s).
Creative Cloud for desktop
https://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Activation & deactivation help
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

I want to burn my old cd's and have them in my iTunes library. Is there some "I" software that I can buy that will treat the new songs like "purchased" songs (i.e.: available for synching on all my devices)?

I want to burn my old cd's and have them in my iTunes library. Is there some "I" software that I can buy that will treat the new songs like "purchased" songs (i.e.: available for synching on all my devices)?

http://www.apple.com/itunes/itunes-match/
'With iTunes in the Cloud, the music you buy from the iTunes Store automatically appears on all your devices.1 And for music you haven’t purchased from iTunes, iTunes Match is the perfect solution. iTunes Match is built right into iTunes on your computer and the Music app on your iOS devices.2 It lets you store your entire collection in iCloud, even music you’ve imported from CDs or purchased somewhere other than iTunes. When it’s in iCloud, it’s available on all your devices. So you can enjoy all your music anywhere, anytime — on your iPhone, iPad, iPod touch, Mac, PC, or Apple TV.'
It costs $24.99 p.a.. Songs you've ripped from your CDs which are also in the Store will be recognized (hopefully) and be available: if they aren't in the Store you can uploads them. The limit is 25,000 songs (purchases do not count towards this limit). This is not part of the 5GB free storage.
Incidentally, just to clarify the terminology so you don't get into confusion, you don't mean 'burn' (make a CD from existing files) you mean 'rip' (copy files from a CD onto your computer).

When attempting to purchase a song from i-tunes that was on an old ipod that I had to replace, the song is marked as 'purchased' and grayed out. Is there a way that I can download these previously purchased items onto my new ipod?

When attempting to purchase a song from i-tunes that was on an old ipod that I had to replace, the song is marked as 'purchased' and grayed out. Is there a way that I can download these previously purchased items onto my new ipod?

Lori,
If you upgrade to iTunes 10.3, you can redownload your past purchases from the iCloud. Just go to the home page of the iTunes Store and click on "Purchased" under "Quick Links." It will bring up a list of your past purchases that are not currently in your library, with a little arrow icon that lets you download.

HT1338 i have about 88,000 songs in my music library, some are duplicates. Does anyone know of any Apple Product or 3rd party software that will identify and remove duplicates.

I have about 88,000 songs in my music library, some are duplicates. Does anyone know of any Apple Product or 3rd party software that will identify and remove duplicates.

Backup your music to an external source before doing this, just in case you delete the originals by accident.
iTunes will show you the duplicates. But I recommend tagging their comments or another field once selecting them to ensure you don't accidentally delete both the original and duplicate. You can always select all of them and change all their comment tags at once. Once you've done that, stop showing duplications, and then sort by the comment field. This will allow you to determine whether only the duplicates were shown in the show duplicates, or the originals. If you see any without comments, then you can go ahead and delete the duplicates.

Is there any software that will delete video after I crop in iMovie

Ok, I've spent days reading posts and googling for answers. I'm ready to spend $$ if I need to. We're all aware of how iMovie won't let us delete unwanted video. I'm trying to fix a wedding video some hack did in SVHS. I got it from DVD to Video_TS to DV using MPEG Streamline and imported the video clips to iMovie. (By "video clips", I am mean the DV files.)
There are 7 DV files from a 69-minute video. I am creating tons of smaller "clips" from these DV files - like 5 to 15-second clips - because I want to use transitions in between them.
My understanding of what's happening in iMovie as I do this is as follows:
- Let's say I begin with the first DV file that is 1.9 GB, about 10 minutes long.
- I create a 10-second clip from that by (a) selecting my start and end points, (b) clicking Edit>copy, (c) clicking on the clip pane, (d) clicking Edit>paste.
- Now I have a new 10-second clip.
- But! I also have 1.9 GB of unused video behind that clip, right?
- I repeat the process maybe 30 or 40 more times until I've edited the original 10-minute DV file (clip) and what do I have?
- Do I have 40 10-second clips each with 1.9 GB of unwanted video behind it??
As I said, with 7 DV files at 1.9 GB each that need to be sliced into multiple clips for transition effects, etc, this will shut down my MB quick. I've only done this with 3 DV files so far and I have 12 GB of HD space left. I will obviously not be able to finish the project this way. What a disaster!
So here's the million dollar question -- Is there ANY 3rd party software that will allow me to slice these DV files into small clips and permanently delete the unused video?
I don't care if I use something that "replaces" iMovie or something that works with iMovie. Like I said, I'm ready to spend the money to save the time, disk space, and aggravation. Note I worked in video production (many) years ago so I'm not afraid of something "technical" (editing concepts aren't new to me). However, I'm far from being an expert on what's out there these days.
I should also note that the original wedding video (DVD) did not have any chapters or anything of the sort. The ONLY way I can edit this is to import the entire file as it was converted to DV. It's not like I can import only the video I want to use. I hope that makes sense. I do not have access to the source video either - only this pathetic DVD he calls a wedding video.
Thanks in advance so much for any help. I never would've gotten this far without all the posts!
MacBook Mac OS X (10.4.7) 2 GHz Intel Core Duo, 1 GB DDR2 SDRAM
MacBook Mac OS X (10.4.7) 2 GHz Intel Core Duo, 1 GB DDR2 SDRAM
MacBook Mac OS X (10.4.7) 2 GHz Intel Core Duo, 1 GB DDR2 SDRAM

- Do I have 40 10-second clips each with 1.9 GB of unwanted video behind it??
Not to worry. When we Copy and Paste within a project, iMovie HD creates a new clip thumbnail for the Timeline/Clips pane, then simply adds a new pointer to the source video. The source material is not duplicated.
When you Copy a clip and Paste a clip to a DIFFERENT project then Yes, the clip's entire source video file is duplicated. (When Copying between projects, be sure to Copy and Paste all the clips together so iMovie duplicates the source files just one time.)
Next time, you might consider setting your iMovie 6 preferences to limit the length of imported clips to 3 minutes — or whatever duration you want. Then each imported clip will have its own source file. When you discard an entire clip its file will be discarded too, shrinking the size of the project.
If you have no need to preserve the clips as clips you could export the project to a Full Quality movie that you import to a new project. Everything will arrive as a single clip, which may be okay here. Then discard your old project. The project will be smaller, containing just the stuff on the Timeline.
If the Timeline contains most of the source material — just split into small clips — there may not be a lot of "extra" material in the project. To get an estimate of how large the Timeline really is, open the "Timeline Movie.mov" that's inside the Cache folder of the project in QuickTime Player. QT Player's Show Movie Info window will show the size of the material it represents.
Karl

I'm looking for a Jukebox app that can download songs I do not have, but my friends want to hear at a party. Any ideas?

I'm looking for a Jukebox app that can download songs I do not have, but my friends want to hear at a party. Any ideas?

Ah. I'm surprised, but there we go.
Have a look here ...
http://jam.hitsquad.com/vocal/about2136.html
(courtesy of googling 'OSX free multitrack recording software')
Didn't have time to do more than skim, but 'Ardour' looked promising. Protools is the only one I've used, the full product is one of the industry standards, but the free 'lite' version listed here seems to be limited to 2 in/out as well.
Referring to your original post, I'd think trying to write or 'script' something would be a nightmare ... synchronisation of streams within something like Applescript would be a major issue, quite apart from anything else.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

On my iPhone, I have songs from a CD that I bought and no longer haev. I now have a new computer and it is telling me that to move songs that I only have on my computer, I must erase all of the music from my iPhone. Help!

On my iPhone, I have songs from a CD that I bought and no longer have. I now have a new computer and it is telling me that to move songs that I only have on my computer, I must erase all of the music from my iPhone (It also says that my phone is already synced with another computer so it has to download everything). I would like to keep all of the music on my Phone and still be able to have these songs from my computer on my iPhone. Help!

The iPhone is not a storage device. iPhone is designed to sync with 1 computer and
iPhone sync only one way computer -> iPhone except content bought from iTunes.
Read this user tip:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

Thank you for your response.
After searching around for any pointers to my problem, the above fixes I listed were the things that came closest to maybe addressing the issue, that I was able to locate. But since none worked, and as you pointed out, it is now clear they will only help towards viewing sent images rather than helping with inserting any images in the body of the email, which is the problem I suddenly started facing today.
Coming to your suggestion, on opening the Write window, the Insert choice on the menu bar is indeed available. And I had already tried using that, by clicking on the '''Insert ----> Image''' option listed. That opens
up the "Image Properties" box but using that has not resolved the matter either. It results in an image box getting inserted within the email but without the actual image itself.
Plus, normally I am able to use the '''Paste''' function in the Edit menu or through right-click, but today the (Cut/Copy/Paste) functions have gone inactive, thereby disallowing me to use that to place an image within the email.

Mac mini solid state hard drive does that replace the 2 by 1T hard drive

mac mini solid state hard drive does that replace the 2 by 1T hard drive

There wouldn't be enough room in the Mac Mini enclosure for 2 Fusion Drives since they are really just a SSD and a Platter HD working in conjunction. Could really be smoking in a 4 Drive RAID box though. I am speculating here but there is only 1 additional partition allowed in the Fusion Drive. My thought is that the current Management Software would get thoroughly confused with multiple partitions probably due to mount points not being able to register in a normal manner. IMHO the Fusion Drive is another crutch for the normal/average user that doesn't want to be bothered with file management protocols.

Is there any software that will normalize sound volume?

I don't want to use Sound Check to normalize my whole library, and my library is too large to modify the volume on a song by song basis. What I need to find is software that can normalize the volume of a playlist, both while playing it on my Mac, and also when burning a playlist into an mp3 disk. Does such a program exist for Mac???

Have a look at iVolume, you'll find it at this link: iVolume

Is labview able to communicate with softwares that can simulate dynamics?

I am currently trying to use labview for my simulation, but it turns out that i still have a long way to go.
And it would really be pain in the a** if i have to make it all in labview.
Is there any way that labview can communicate with other software that can simulate dinamics with 3D model also such as (CATIA, NASTRAN, etc)
-Just a student-

Hi Nandha,
Could you please describe exactly what you are trying to do in more details? What kind of simulation are you trying to create? We have several LabVIEW toolkits that might help you accomplish your goals. Please review the following:
NI Developer Suite Control Design and Simulation Option
You can click on specific links on the left-hand side of the above-mentioned website. Particularly look at Control Design Toolkit, System Identification Toolkit, and Simulation Module.
You can quickly create custom LabVIEW user interfaces to verify Simulink models interactively and rapidly build controller prototypes and hardware-in-the-loop test systems based on Simulink models with the Simulation Interface Toolkit. (Simulink is a trademarked product of the MathWorks).
I also found the following links on www.ni.com related to CATIA, and NASTRAN. VRML files are natively supported in LabVIEW 8.20. You can also input VRML files in NI INSIGHT .
I hope this helps! Let me know if there is anything else I can do for you.
Kalin T.
National Instruments

Software that replaces Tunatic song identification

Similar Messages

Maybe you are looking for