Software units & usage types review
Hi,
How can I view software units & usage types which was installed before? Is there any Tcode to view these?
[SAP ERP 2005]
Regards,
Toan Do
Hi Toan,
To view usage types open the following page http://<SAP J2EE hostname>:5<SID #>00/utl/UsageTypesInfo
To see components deployed on the J2EE server check out http://<SAP J2EE hostname>:5<SID #>00/sap/monitoring/SystemInfo
See the OSS note 883948 for more info,
Regards,
Mike
Similar Messages
-
Good Sunday everyone,
I am a newbie in SAP BI and having a problem understanding the concept of usage types. For an example, what does it mean that BI is a usage type? I've read that SAP implementations are based on usage type and not components.... what does that really mean?
Thank youHi Gunit2003,
Usage type can be think as a installation software unit, which is based on several components combination.
For example, AS ABAP, AS JAVA, BI, PI, DI, etc are installation software unit(usage type), user can select one or several to install on a system.
And what is component? for example, AS ABAP usage type include several components, such as, DBMS, message server, dialog work process, batc work process, gateway, ICM, etc.
Regards,
Rongliang -
How to install Additional Software Units or Usage Types in an Existing SAP
Hi.
We have a Netweaver 7.0 EPH1 with JAVA, EP and EPC intallation,but i need install additional usage type BI JAVA and NWDI.
Copy the downloaded SCAs in /usr/sap/trans/EPS/in and when execute JSPM - option Additional usage type installation, this not show usages type .
according to the installation guide, this is the procedure.
please help me.
Thanks very much.
Regards,
Jhon JairoHi,
Once you have correctly extracted and put the files in /usr/sap/trans/EPS/in, you need to run JSPM and select the option of additional usage types.
Next, select the desired stack from the inbox. Click Next.
JSPM shows the currently installed usage types and those of the new usage types in the stack, which are part of the active product on the system and all of their dependencies are fulfilled. They can have different status:
Available u2013 the usage type is already active in the system. These usage types are automatically skipped.
OK u2013 the usage type can be installed on the system. Specify whether to install or skip the usage type in the Action column.
Revise u2013 the usage type cannot be installed on this system. Click the Show Details button for more information. These usage types are automatically skipped.
Not Supported - the usage type is not supported by JSPM.
Can you tell us what is the status of the usage types visible to you? Are the new usage types having a different status or are they not completely visible at all? If that is the case, you may want to check whether the files that you have downloaded are correct or not and also check whether these are correctly extracted and placed in the right folder.
Regards,
Shitij -
Usage types and installed software list
Tell me please is it the way to see what usage types are installed in system?
Thanks,
OlgaIf you have the Java Stack in your system, you could use
http://<host>:<http_port>/utl/UsageTypesInfo
For example:
http://10.1.1.198:50000/utl/UsageTypesInfo
use the user J2EE_ADMIN, and you will see the information...
Active Usage Types
Product Name UT Code Short Name Description Activation Date Configured
SAP NetWeaver 2004s PI PI Process Integration Mon Nov 10 00:00:00 CST 2008 YES
SAP NetWeaver 2004s AS AS Java Application Server Java Mon Nov 10 00:00:00 CST 2008 YES
SAP NetWeaver 2004s EPC EP Core Enterprise Portal Core Components Mon Nov 10 00:00:00 CST 2008 YES
SAP NetWeaver 2004s EP EP Enterprise Portal Mon Nov 10 00:00:00 CST 2008 NO
SAP NetWeaver 2004s AAS AS ABAP Application Server ABAP Mon Nov 10 00:00:00 CST 2008 YES
SAP ERP 2005 ECC ECC Central Component Mon Nov 10 00:00:00 CST 2008 YES
SAP ERP 2005 BP-ERP BP ERP Business Packages (Portal Content) Mon Nov 10 00:00:00 CST 2008 YES -
SAP Netweaver - What are Usage Types?
I would just like to clarify as to what are Usage Types? What role they play in the installation of an SAP Netweaver System? Upon adding Usage Types, for instance, BI or PI, will it mean that the SAP Product that you are installing with these Usage Types will enable BI or PI to exist within the product you are installing? I would just like to deepen my knowledge with regards to this. Awards will be provided accordingly depending on the knowledge gain that will be acquired.
Hi,
Usage types are the software units to be installed and configured according to the needs.
All are present inside the s/w bundle.by checking the boxes you are enabling those services.
Suppose you want PI then u need to check the as JAVA and as ABAP.
Regards,
Spandan -
Hello Sap-Experts!
For some documentation I need a definition of "Usage -Type" what does it mean at all.
I didn't find any definitions.
I am very pleased for any help.
Best regards
Vladimir GolovtchinerHi,
As per note 883948 (Inst.Add.Java Usage Types/Software Units
), The term "software unit" is used as a synonym for "usage type" in the context of SAP ERP, SAP CRM, SAP SRM and SAP SCM.
So basically, usage type is a bundle of programs designed to do something specific. BI usage type would be used to business intelligence, EP usage type is used for portal, etc.
You can find out your current UTs installed on your j2ee stack using
http://<host>:<http_port>/utl/UsageTypesInfo
Hope this helps. -
Install of Sol. Mgr hangs during INSTALL SOFTWARE UNITS phase of SAPINST
I'm installing Solution Mgr. 7.0 Ehp1 with Oracle on Windows 2003 Server. The JDK is 1.4.2_26-x64
When I get to the INSTALL SOFTWARE UNITS phase of SAPINST, it hangs. This is phase 37 of 46
I see several different warnings/errors in the various logs. Not sure which one is the real problem. Here is what I see in the various logs.
Thanks for any help you can give me.
sapinst.log
ERROR 2010-05-17 22:47:32.955
FJS-00003 uncaught exception: nw.usageTypes.utlConnectionError:
Execution of UTL tool 'C:\j2sdk1.4.2_26-x64\bin\java.exe -classpath C:\usr\sap\MES\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jce.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jsse.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_smime.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_ssl.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SDMutil.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SLUtil.jar;C:\usr\sap\MES\DVEBMGS00\exe\ojdbc14.jar -activated -prod_name=SOLMAN -usage_name=SM-APP -usage_vendor=sap.com -log=UTL_activate_usages.log -action=true -sid=MES -dsn=jdbc/pool/MES -ssprops=C:/usr/sap/MES/SYS/global/security/data/SecStore.properties -ssk=C:/usr/sap/MES/SYS/global/security/data/SecStore.key' aborts with return code 64 due to a database connection error. DIAGNOSIS: The connection parameters are wrong or the database server has been shut down. SOLUTION: Check 'UTL_activate_usages.log' and 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UTL.java.log' for more information. (in script unknown, line 0: ???)
ERROR 2010-05-17 22:47:34.126
FCO-00011 The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|5|0|enableUsageTypes was executed with status ERROR ( Last error reported by the step :uncaught exception: nw.usageTypes.utlConnectionError:
Execution of UTL tool 'C:\j2sdk1.4.2_26-x64\bin\java.exe -classpath C:\usr\sap\MES\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jce.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_jsse.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_smime.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/iaik_ssl.jar;
solman/sapmnt/MES/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SDMutil.jar;C:/usr/sap/MES/SYS/global/sltools/sharedlib/SLUtil.jar;C:\usr\sap\MES\DVEBMGS00\exe\ojdbc14.jar -activated -prod_name=SOLMAN -usage_name=SM-APP -usage_vendor=sap.com -log=UTL_activate_usages.log -action=true -sid=MES -dsn=jdbc/pool/MES -ssprops=C:/usr/sap/MES/SYS/global/security/data/SecStore.properties -ssk=C:/usr/sap/MES/SYS/global/security/data/SecStore.key' aborts with return code 64 due to a database connection error. DIAGNOSIS: The connection parameters are wrong or the database server has been shut down. SOLUTION: Check 'UTL_activate_usages.log' and 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UTL.java.log' for more information. (in script unknown, line 0: ???)).
java_server.log:
Info: Starting cluster instance processes.
Info: Starting the instance JC_solman_MES_00 running on host solman
Info: Starting the instance JC_solman_MES_00 processes. The instance is running on host solman
Info: Starting the process server0
std_server0.out
May 17, 2010 11:39:38... ...xt.<init>(UserContextSpi, Properties) [SAPEngine_System_Thread[impl:5]_11] Fatal: Can not instantiate UserContext with given properties.
service security ================= ERROR =================
Core service security failed. J2EE Engine cannot be started.
com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception:
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:183)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set.
dev_jcontrol
[Thr 3208] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 1996] JControlDPMessageProxy: Thread 1996 started as handler thread for R/3 dispatcher messages.
[Thr 3208] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdk1.4.2_26-x64
[Thr 3208] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
dev_rd
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 448
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1534) [nixxi.cpp 4436]
***LOG S23=> GwIDisconnectClient, client disconnected (003) [gwxxrd.c 11603]
***LOG S74=> GwIDisconnectClient, client disconnected ( solman) [gwxxrd.c 11614]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11649]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11662]
LOCATION SAP-Gateway on host solman.sap.mertik.de / sapgw00
ERROR connection to partner 'solman.sap.mertik.de:1534' broken
TIME Mon May 17 23:39:38 2010
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 4436
DETAIL NiIRead
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 3
dev_server0
[Thr 4332] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID2285550]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdk1.4.2_26-x64
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser -verbose:gc -Djco.jarm=1 -XX:PermSize=512m -XX:MaxPermSize=512m -XX:NewSize=320m -XX:MaxNewSize=320m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:PrintGCTimeStamps -XX:UseTLAB -XX:SoftRefLRUPolicyMSPerMB=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:+UseParNewGC -Drdbms.driverLocation=C:/usr/sap/MES/DVEBMGS00/exe/ojdbc14.jar
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 1024M
-> init heap size : 1024M
-> stack size : 2M
-> root path : C:\usr\sap\MES\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : C:\usr\sap\MES\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : C:\usr\sap\MES\DVEBMGS00\exe\jstartup.jar;C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 4332] JLaunchISetDebugMode: set debug mode [no]
[Thr 4404] JLaunchIStartFunc: Thread 4404 started as Java VM thread.
[Thr 4404] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djco.jarm=1
-> arg[ 11]: -XX:PermSize=512m
-> arg[ 12]: -XX:MaxPermSize=512m
-> arg[ 13]: -XX:NewSize=320m
-> arg[ 14]: -XX:MaxNewSize=320m
-> arg[ 15]: -XX:SurvivorRatio=2
-> arg[ 16]: -XX:TargetSurvivorRatio=90
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -XX:+UseTLAB
-> arg[ 19]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 20]: -Dsun.io.useCanonCaches=false
-> arg[ 21]: -Djava.awt.headless=true
-> arg[ 22]: -XX:+UseParNewGC
-> arg[ 23]: -Drdbms.driverLocation=C:/usr/sap/MES/DVEBMGS00/exe/ojdbc14.jar
-> arg[ 24]: -Dsys.global.dir=C:\usr\sap\MES\SYS\global
-> arg[ 25]: -Dapplication.home=C:\usr\sap\MES\DVEBMGS00\exe
-> arg[ 26]: -Djava.class.path=C:\usr\sap\MES\DVEBMGS00\exe\jstartup.jar;C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_26-x64\jre\bin\server;C:\j2sdk1.4.2_26-x64\jre\bin;C:\j2sdk1.4.2_26-x64\bin;C:\usr\sap\MES\DVEBMGS00\j2ee\os_libs;C:\ORACLE\MES\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\usr\sap\MES\SYS\exe\uc\NTAMD64
-> arg[ 28]: -Dmemory.manager=1024M
-> arg[ 29]: -Xmx1024M
-> arg[ 30]: -Xms1024M
-> arg[ 31]: -Xss2M
-> arg[ 32]: -DLoadBalanceRestricted=no
-> arg[ 33]: -Djstartup.mode=JCONTROL
-> arg[ 34]: -Djstartup.ownProcessId=4328
-> arg[ 35]: -Djstartup.ownHardwareId=U1840606892
-> arg[ 36]: -Djstartup.whoami=server
-> arg[ 37]: -Djstartup.debuggable=no
-> arg[ 38]: -Xss2m
-> arg[ 39]: -DSAPINFO=MES_00_server
-> arg[ 40]: -DSAPSTART=1
-> arg[ 41]: -DCONNECT_PORT=64998
-> arg[ 42]: -DSAPSYSTEM=00
-> arg[ 43]: -DSAPSYSTEMNAME=MES
-> arg[ 44]: -DSAPMYNAME=solman_MES_00
-> arg[ 45]: -DSAPPROFILE=C:\usr\sap\MES\SYS\profile\MES_DVEBMGS00_solman
-> arg[ 46]: -DFRFC_FALLBACK=ON
-> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 48]: -DSAPSTARTUP=1
-> arg[ 49]: -DSAPSYSTEM=00
-> arg[ 50]: -DSAPSYSTEMNAME=MES
-> arg[ 51]: -DSAPMYNAME=solman_MES_00
-> arg[ 52]: -DSAPDBHOST=solman
-> arg[ 53]: -Dj2ee.dbhost=solman
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 4404] JHVM_LoadJavaVM: Java VM created OK.
[Thr 5488] Mon May 17 23:39:30 2010
[Thr 5488] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 5488] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 5488] Mon May 17 23:39:32 2010
[Thr 5488] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
[Thr 4440] Mon May 17 23:39:38 2010
[Thr 4440] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 4440] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.Basis Guy,
I followed your instructions, and the problem still exist. Per note 908911, I added "SAP_BC_JSF_COMMUNICATION" role to the SAPJSF user in the backend ABAP system. I've tried starting and stopping
the System through SAP MMC, and I see the following (solman is our hostname):
solman 0 - The AS ABAP work processes start sucessfully, the AS Java processes, show three processes, with two in the stopped state:
1) SDM - state is stopped
2) Dispatcher - state is running
3) server0 - state is stopped, with a return code of -11113
solman 1 - shows 2 processes
1) Msg Server - running
2) Enqueue Server - running
From SAP MMC, I look at the Developer trace for the 2 stopped processes (SDM and server0). This brings up the dev_server0 log, and the dev_sdm log. In both files, I see the following error:
[Thr 3712] JStartupICheckFrameworkPackage: can't find framework package C:\usr\sap\MES\DVEBMGS00\exe\jvmx.jar
When I look for this file, it does not exist. Is this my problem, and where does this file come from during the install?
From the Syslog of SAP MMC, I see three errors when starting the system, in this order:
Process Type: DP Message ID: GZZ
SAP-Basis System: > 1 possible network problems detected - check tracefile and adjus
Process Type: RD Message ID: Q01
SAP-Basis System: Operating system call recv failed (error no. 10054)
Process Type: D0 Message ID: R49 User: SAPJSF Client: 001
SAP-Basis System: Communication error, CPIC return code 020, SAP return code 223
Also, I see the following error in the defaulTtrace.0.trc file:
#com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "
solman
sapmnt
MES
SYS
global
security
data
SecStore.properties".
java.io.FileNotFoundException:
solman
sapmnt
MES
SYS
global
security
data
SecStore.properties (The requested operation cannot be performed on a file with a user-mapped section open)
However, I see that this file does exist, but what does it mean "a user-mapped section is open"?
As for the configtool, Global Server Configuration, when I look for all instances of J2EE_GUEST or SAPJSF, only two parameters show up:
ume.login.guest_user.uniqueids = J2EE_GUEST
ume.r3.connection.master.user = SAPJSF
Looking in the ABAP System (via SU01), I see that J2EE_GUEST shows password deactivated. Is this correct?
Please advise.
Rick
Sunny,
Not sure what you mean by update the latest logs from sapinst.log. I've displayed the sapinst.log in the original post. I may just be misunderstanding your request.
Let me know if there is more info that you need. -
EP Install( i missed DI software unit)
have been installed EP7.0.
Then during installation, I missed DI software componentUnit.
How can I fix this problem?
I want to know how to add on DI to EP.
Is it possible?
Best Regards BK.Hi Bub
No worries, you can add the DI as an usage type at any point of time.
Through SDM deploy the following SCAs:
1. DICBS*_.SCA - DI Component Build Server 7.00
2. DICMS*_.SCA - DI Change Mgmt Server 7.00
3.DIDTR*_.SCA - DI Design Time Repository 7.00
for any doubts follow the note : 883948
Cheers !!!
Satish Kumar -
Functionality field Usage type
Hi,
Could you tell me, what is functionality field Usage type. This field is set to the solid, does not change. I has some important control function. What?
Regards, StenwaHi Stenwa,
The usage type is the main classification field for the rental objects. It controls functions such, as:
1. The field stauts groups of your rental objects - which fields are available for input,etc.
2. The screens you can maintain for the rental object
3. Which area types are allowed, mandatory, etc.
4. whether the rental object can be used commercially/non-commercially or both
According to saphelp:
"You can change the usage type of the rental unit as long as no active lease-out exists for a rental unit.
You can only change the usage type of a rental unit with an active lease-out if the allocation of an internal usage type to the external usage type in Real Estate Customizing is not changed."
Hope this helps!
KR,Severina -
NW system installation without usage types
Dear Colleagues,
I am hoping this is the correct forum to post this.
A customer asked me 'Is it possible to install NW system without any usage types(usage types are like PI, EP, BI....).'
Any help here is appreciated.
Best Regards
DSure, no problem... I have a customer that runs java only stacks without usage type, just to run custom software..
Kind regards,
Mark -
Which usage types are charged to my bill?
Last month I had the following usage type totals for my main cell phone:
Minutes by Usage Type Report
PlanAllow,PromoAllow
8
PlanAllow
289
Overage
40
N&W
18
PlanAllow,CallVM
3
M2MAllow
158
N&W,CallVM
2
PromoAllow,PartAllow,Overage
9
PromoAllow
18
Total
545
The total on my bill was 342 minutes and I can't figure out which types are included in that total. I was told that any type with 'PlanAllow' or 'Overage' would be included, but that adds up to 329 if I only count the 'PlanAllow' and 'Overage' figures. If I also include the other types that have 'PlanAllow..' + additional, e.g. 'PlanAllow,PromoAllow', I get 349. So where does the 342 come from?Since you've asked, we have the
NATIONWIDE TALK SHARE 1400
Includes:
Monthly Account Access Charge
Monthly Line Access Charge for 3 lines
1400 Shared Monthly Allowance Minutes
Per Minute Rate After Allowance: $0.40/min. Peak , $0.40/min. Off-Peak
I'm not sure why it would make any difference which plan. I'm a software developer and typically there are uniform algorithms based upon fields like Usage Type that determine what's included and what's not included in a total. I'm not sure why Verizon doesn't just add a column in the data they provide that would indicate whether particular call's minutes are included in the bill or not, unless they're trying to obfuscate the numbers so that customers get frustrated in trying to figure out how Verizon calculates the total minutes that can be charged at the exorbitant $0.40/min. rate.
The numbers I've posted were for just one of our three phones and our overages for that month added up to $110. I had recently reduced our plan from 1400 to 700 minutes, but in doing so I had to give up the Friends and Family program. With that much overage I really wanted to be able to analyze where the overages were coming from, but based upon the data provided I can't. I've subsequently increased my plan back to 1400 minutes even though we are usually well under 700. To Verizon's credit, they were willing to waive the difference of the overage minutes and what it would have cost if I had kept the 1400 plan, but I'd still like to be able to reconcile their provided data and analytic tools to my bills so that we can manage our calling behaviors in a way so that we don't end up paying for an extra 700 minutes per month that we don't use. -
BI java usage type installation error
hello everyone,
Please help me resolve the following:
Question1
the system was earlier installed with following usage types:
-as abap, as java, epc, ep (all on same machine)
Now i want to addin BI-Java. During the installation I encounter error at phase "Install Java Engine" as follows:
sapinst.log
INFO 2009-02-15 03:22:23
Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS "
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_jce.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_jsse.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_smime.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_ssl.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib;C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib;D:\usr\sap\DEV\DVEBMGS00\exe\ojdbc14.jar" insert -s DEV -f
sapdev/sapmnt/DEV/SYS/global/security/data/SecStore.properties -k
sapdev/sapmnt/DEV/SYS/global/security/data/SecStore.key admin/host/DEV sapdev is written to the logfile SecureStoreInsert.log.
WARNING 2009-02-15 03:22:24
Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS "
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_jce.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_jsse.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_smime.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/iaik_ssl.jar;
sapdev/sapmnt/DEV/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/lib;C:/Program Files/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedlib;D:\usr\sap\DEV\DVEBMGS00\exe\ojdbc14.jar" insert -s DEV -f
sapdev/sapmnt/DEV/SYS/global/security/data/SecStore.properties -k
sapdev/sapmnt/DEV/SYS/global/security/data/SecStore.key admin/host/DEV sapdev" finished with return code 2. Output:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.
ERROR 2009-02-15 03:22:24
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
SecureStoreInsert.log
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.
oh and btw...the issue remains with both administrator/devadm
OR Question 2
If the above scenario isnt possible, and I performed an uninstall, and after installing all the usage types again, and recovering the database....will i be able to get my integrated BI/ERP client back with it .. or will i have to perform the setup of BI client again ?
Thanks for your valuable replies.
Regards,First of all... As per SAP Installation guide additional usage type BI installation is POSSIBLE.
Please check SAP Note [883948|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=883948]
And I guess you have all the primary required components.i.e. ABAP,Java, EP, EPC ...
Question1
the system was earlier installed with following usage types:
-as abap, as java, epc, ep (all on same machine)
Now i want to addin BI-Java. During the installation I encounter error at
phase "Install Java Engine" as follows:
ERROR 2009-02-15 03:22:24
CJS-30051 Cannot insert a key value pair into the secure store fails; see output
of log file SecureStoreInsert.log:
A key/value pair with this key already exists in the store..
Above error is basically because of JDK and not because of BI
Please check following blogs...
[Re: key value pair error;
[SAPNW2004sJavaSP9_Trial- SecureStoreInsert ERROR;
SAP Note [1071472|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1071472]
As per this... following could be reason.
1. check that iaik_jce_export.jar file is NOT included into the CLASSPATH.
2.Use only one JDK version (or remove the other installed versions from the used environment variables).
3. SAP Note [739043|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=739043]
OR Question 2
If the above scenario isnt possible, and I performed an uninstall,
and after installing all the usage types again, and recovering the database....
will i be able to get my integrated BI/ERP client back with it ..
or will i have to perform the setup of BI client again ?
I guess It might be difficult to UNINSTALL - may cause some inconsistencies in the current system.
Still - If you really Don't want BI now... Best option could be full restore and recovery.- If you have consistent backup.
But if you want BI - then, since above problem is because of JDK , I think it could be resolved.
Let us know if anything.... -
Backing up and restoring EP 7.0 (With Usage type DI installed) on HP-UX
Hello,
I know and saw several blogs/forums for Portal/Java WebAS 640 backup and restore and most of them says to backup Oracle and backup filesystems (/usr/sap/SID/* and /sapmnt/SID/* and ofcourse oracle).
WE have never tested our restore on our Portal system which has DI (Dev Infrastructure) installed with it, hence need to know is it just enough to backup the above files systems (and also /home/sidadm and /etc) AND then just restore the oracle backup, and above files systems and system will be up and running with all the DI developments we did?
We are about to apply our first round of Stacks on EP system (NW04s) with DI usage type, hence we want to test our restore if everything goes fine in case we have to do that.
Our env:
EP/DI on HP UX - currently going to stack 15
Oracle on AIX
Your response is greatly appreciated.
Thanks
WAwe tried to just restore the Filesystem and database and without any efforts we were able to startup java.
-
Usage type issue with PI upgrade from 7.01 to 7.11
Hi guys,
We are currently performing an upgrade on our PI system.
We are upgrading from PI 7.01 to PI 7.11 and we've come cross an issue during the prepare phase of the install.
An error has occurred during the execution of the CHECK_SUPPORTED_SOURCE_USAGES phase.
This upgrade doesn't support upgrade of sap.com/MI usage detected on the source system.
You can find more information in the log file /usr/sap/PI3/upg/java/log/CHECK_SUPPORTED_SOURCE_USAGES_SSU_01.LOG.
Use the information provided to troubleshoot the problem. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following key words: com.sap.sdt.j2ee.phases.PhaseTypeCheckSupportedSourceUsages com.sap.sdt.j2ee.tools.check.NegativeResultException This upgrade doesn't support upgrade of sap.com/MI usage detected on the source system. CHECK_SUPPORTED_SOURCE_USAGES INIT PREPARE NetWeaver Upgrade SAPJup Java Upgrade
When reporting problems to SAP Support, attach the trouble ticket file /usr/sap/PI3/upg/java/log/TroubleTicket_01.txt to your message.
We've looked through the main upgrade notes and they mention which usage types are supported, but they do not mention explicity what usage are not supported, and how to proceed with the upgrade if your system does have one of these non-supported usage types.
Considering our system does contain usage type MI, does this mean that we cannot upgrade our current PI system to 7.11?
Please help!
Thanks,
StephHello
Please see note #1247043 Release Restrictions for EHP 1 for SAP NetWeaver PI 7.1 - section "Upgrade: source system must be a dedicated PI system".
It is not possible to upgrade an existing system with the usage type MI. Even if you delete the usage type MI (if this is possible) the upgrade will not be possible.
Regards
Mark -
PI in ECC 6.0, usage type AS ABAP
Dear all,
Is there any restriction on the functionalities of PI/XI in ECC 6.0 (with ABAP only)?
Can I have full XI functionalities if when I install ECC 6.0, I also check AS Java?
GiangHi Giang
SAP NetWeaver 7.0 - uage type PI corresponds to product version instance SAP ERP 6.0 - SAP NW - Process Integration.
PI requires AS ABAP and AS Java as prerequisites in the same system. Optionally, it can be combined with other usage types in one system.
Regarding installation with ECC on one server, see the following recommendation from the SAP ERP Master Guide, already mentioned:
"We recommend that you identify a dedicated PI system. For PI, no other system in your system landscape may have a higher release than the PI system. For exceptions to this rule, see SAP Note 1043047. "
regards,
Andreas R
Maybe you are looking for
-
HT5058 How do I subscribe to a calendar with my exchange account in ical
When I go to subscribe to a calendar the only places it will allow me to have the subscribed calendar is in my iCloud calendars. i want my exchange account to be the location of the calendar. very odd
-
Does MacBook Pro 13 inch (mid 2010 model) Support DP MST 1.2?
Does the MacBook's Pro 13 inch (mid 2010 model) mini Display Port output support the DisplayPort 1.2 Multi Stream protocol? The graphics card on this model is the Nvidia GeForce 320M. Thank you.
-
Convert pdf to word doc with data
Adobe X Pro - File > Save as > Microsoft word > word document doesn't save the data. How can I get the data too? Thanks
-
Option to Export as 720 or 1080 is drained?
Im editing HD clips in iMovie 11 but when I go to Share>Export Movie, the 720P or 1080P options are usually drained. Sometimes 720P is available. I know if I export as Quicktime I can get around this usually but I still dont know what is causing this
-
CS3 - Placed objects are duplicated to temp
hi, I am placing a PSD document into my document. And PS CS3 creates a copy of my document in App data / temp. I had pointed to a document in my project folder, but it is not linked with the original anymore. What is the problem? thnks!