Software up grade 3.1.2

As soon as I install the new upgrade, my email stopped sending and receiving? Is there something I need to change? I checked the settings and they appear to correct.

Usually a simple removal of that email account and then adding it back does the trick

Similar Messages

  • Software up-grade for N95-1 from ver. 11 to ver. 2...

    Hi experts,
    Could you advice me is it safe to make direct up-grade of my Nokia N95 from S60 rev.3 ver.11 to ver.21? Or it should be done step wise - from ver. 11 to ver. 12 then to ver. 20 then to ver. 21 ???
    Regards,
    vasbas

    Hi all,
    I put here my experience with software up-grade and some thoughts about new soft (after one week practicing):
    Preparation for soft up-grade took me about three days - discussion on forum, reserve copying of existing content on memory card and on PC, read instructions on Nokia site, saving my installation sisx files for additional soft as Quickoffice and Goodlink.
    Firmware soft up-date itself took about 45 min - for updater and soft update. No problems encountered! ) It was quick and reliable.
    Quickoffice reinstallation was quick and troublefree! )
    Good reinstallation took as usual few hours. (
    After swithching on phone was with more attractive screens and fonts. I found very useful new feature as Search: My content. Quick access to all application and information on phone. Small problem - to initialize it each time takes about 5-10 sec - slow.
    Another improvement - BT is more stable and connection do not lost when I changing languages on my wireless keyboard application - very useful - save you about few mins to restore Quickword file and keyboard applications again.
    New menu is more functional and well though!
    Today however discovered problem with Maps application. When I off-load it from phone memory (Exit command) - GPRS indicator is still presented on screen (as on hold - dashed) and no possible to make calls - gives Connection error message. Nothing helps only hard restart. After hard restart (on/off button) phone is working as normal but after second trial with Maps story repeated. (((
    Last thing to mention - lock code after new firmware soft up-grade is restored to 12345 but not to user defined one even after back up data transferred back to phone from memory card.
    All other settings as SMS, MMS, Internet, etc., diverts are restored to user defined automatically (from memory card).
    Do not noticed improvement in battery power consumtion decrease.
    Cheers,
    vasbas

  • Software up grade issue.

    Keep getting software upgrade error: The file “MobileDevice.pkg” couldn’t be found on the server “swcdn.apple.com”. Not sure if this is a simple hardware age issue or software re-load thing. Help would be appreciate.

    buckone wrote:
    Apparently Apple's SW group has their head somewhere it should not be regarding all the blogs and support discussions regarding the battery drain issue after the OS 7.0.3 up grade.
    After every iOS update there is a group of users that report faster than normal batter drain.  Search the forums if you doubt that statement.
    After every iOS update there is a group of users that report slower than normal batter drain (improved battery life).  Search the forums if you doubt that statement.
    After every iOS update the vast majority of users experience no noticeable change in battery life and never post anything.
    Drop the conspiracy theory and eliminate the ignorant statements.
    Troubleshoot the device and the battery issues.  You'll find that it is not an iOS7 issue.

  • Software down grade!

    I have Z10 STL100-4, It came up with 10.1 OS and later I update it to 10.2 OS. What if I wipe the phone or reload the device from BBliNK, what would happen to my device would it downgrade to factory given OS 10.1 or remain same on updated version 10.2? Please do relpy.
    Ammar

    Hello,
    When you reload the OS via BBLink, you will select the OS that will be installed to the BB...you will be in control. The currently supported OS levels from your carrier will be offered via this method.
    There are other methods as well, including Sachesi and AutoLoader, to accomplish OS upgrades/reloads. However, these methods would allow you to select an OS level that has not yet been approved by your specific carrier.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I need a authorisation code for my logic 7.1 software.

    hi folks, got my self a wee problem here in Scotland.
    I recently tried to install a new operating system on my Mac, tiger to be exact. for some reason I couldn't install it on my main hard-drive. there was an installation error and it wouldn't go any further in the installation process. as you all know logic 7.1 needs this operating system to work. this is my first problem, why doesn't it allow me to install it on my main hard-drive on my comp???
    my second problem is this. I have a carillon external hard drive which I use for my audio and arrangement files. when i tried to install the new operating system on my crrilion hard-drive the set-up process worked fine and if i boot up from my carilion drive the operating system works fine. i then proceeded to install logic 7.1 and it works fine, now that i have installed the operating system on my external hard drive. (is this an ok way to use my new software up-grades?) the only problem i have is that i cant connect to the internet when i use the new operating system on my carrilion drive. therefore i cant verify my logic 7.1 software via the net. i really want to authorise it now and when i start the software it states that my software will only work for 5 weeks with no authorisation code. the question i ask is how do i get my authorisation code from the logic website using another computer? i want to activate it manually for now untill i get my internet connection sorted.
    is there anyone else out there who has experienced the problems stated above and could you please help me out as im getting severly frustated and dont know how to give myself peace of mind. could you please help?
    thankyou to everyone who hears my pain. x

    Sounds like Disk Utility may become your new best friend. Use it to make an Image, onto your internal drive. voila-authorizations are XSkey dependant, not system dependant.

  • CSS ADI up-grade

    Hi!!
    We will do a software up-grade for a CSS11503. At the moment, we have the ADI version sg0730005. We want to install the ADI version sg0810205.
    On release notes I've found the following:
    "Required Minimum Maintenance Release Before Upgrading to Version 8.10
    For the CSS software version 8.10 to support the SSL compression (SSL-C) module, before you upgrade, the CSS must be at one of the following maintenance releases or higher:
    •7.50.1.03
    •7.40.2.02
    •7.30.4.02
    If the CSS is not at one of these maintenance releases, you must perform the following upgrade sequence:
    1. Upgrade the CSS to the required maintenance release.
    2. Upgrade the CSS to software version 8.10"
    We have not any SSL/Compression Module installed, please help me with the following:
    1.- Can we make the "direct" up-grade to the 8.10.2.05 or we need any previous up-grade?
    2.- If we do the "direct" up-grade to the 8.10 version, can we have any future problem if we need to install a SSL Module (CSS5-SSL-C-K9)?
    Thanks in advance!!

    If you don't have the SSL-C modules, you may upgrade directly, and you won't have any issues if you install SSL-C modules in the future, if those modules are new.
    The need to be at one of the interim levels is only IF you have the SSL-C modules installed, as those modules running older versions will not upgrade to the new version successfully. Remember that the software isn't just a new software release, it's new firmware too.
    My GUESS is that the process of overwriting the 8.10.x version on top of an SSL/C module running an "early" release will fail.

  • Up-Grades

    For th first year I had my Droid X, I loved it, and even had a couple friends get the same phone.  Once Verizon started doing the software up-grades, it scewed up my phone, slowed it down along with creating other issues, and now I dont like it.  And every time there is a new up-date, it doesnt seem to fix what it was doing .Did anyone else experience the same issues?

    oldgar77 wrote:
    For th first year I had my Droid X, I loved it, and even had a couple friends get the same phone.  Once Verizon started doing the software up-grades, it scewed up my phone, slowed it down along with creating other issues, and now I dont like it.  And every time there is a new up-date, it doesnt seem to fix what it was doing .Did anyone else experience the same issues?
    I am assuming you havent tried to hard reset the device, files that need to be updated sometimes do not get updated because of 3rd party apps installed, I would try backup and hard rest and thien see how things go...

  • Prior to recent iPad software updates, I could limit inbound emails to last 50, 100, etc. Is this still available?

    prior to recent software up grades, one could limit in bound emails to last 50, 100 etc. received.  Nice feature if use several computers.  Is this limiting feature available somewhere or could it be restored?  Thanks

    Sorry, no. It went away with iOS7 for some reason.

  • When i open itunes it comes up files missing

    after i installed the lastest software up grade  i tried  to open  i tunes it comes up files missing and u need to reinstall i try to re install but it does not let me . i have even tried to un install and it still wont let me it says files missing can any one help me

    Can you give the full text of the error message that you get when you try to uninstall iTunes.
    Also which version of Windows are you using?

  • Logic authorisation codes for logic 7.1

    hi folks, got my self a wee problem here in Scotland.
    I recently tried to install a new operating system on my Mac, tiger to be exact. for some reason I couldn't install it on my main hard-drive. there was an installation error and it wouldn't go any further in the installation process. as you all know logic 7.1 needs this operating system to work. this is my first problem, why doesn't it allow me to install it on my main hard-drive on my comp???
    my second problem is this. I have a carillon external hard drive which I use for my audio and arrangement files. when i tried to install the new operating system on my crrilion hard-drive the set-up process worked fine and if i boot up from my carilion drive the operating system works fine. i then proceeded to install logic 7.1 and it works fine, now that i have installed the operating system on my external hard drive. (is this an ok way to use my new software up-grades?) the only problem i have is that i cant connect to the internet when i use the new operating system on my carrilion drive. therefore i cant verify my logic 7.1 software via the net. i really want to authorise it now and when i start the software it states that my software will only work for 5 weeks with no authorisation code. the question i ask is how do i get my authorisation code from the logic website using another computer? i want to activate it manually for now untill i get my internet connection sorted.
    is there anyone else out there who has experienced the problems stated above and could you please help me out as im getting severly frustated and dont know how to give myself peace of mind. could you please help?
    thankyou to everyone who hears my pain. x

    The first problem you need to address is WHY you can't install Tiger on your mac HD.
    Do you have enough disk space?
    Would you consider backing up your data and re-formatting your Mac HD?
    Then installing Tiger?

  • Updated Projects that used Color Assist Cause FCPX to Crash

    Hi All,
    After it's release I used Technicolor's now defunct and unsupported Color Assist software to grade a couple of projects. I've recently upgraded those project and events for use with 10.1. The projects and events appear in the browser but show a missing pugin warnning me that Color Assist isn't available.
    I'm not worried about retreiving the grade - my loss thanks to Technicolor. I would however like to somehow preserve the project intact for re-grading later.
    I've tried removing the Color Assist folder from the Project folder prior to performing an upgrade but no dice, FCPX still crashes.
    I'm sure the solution must only involve trashing the right render folders to wipe out any trace of Color Assist from the project. Anyone know which render files/folders I need to trash?
    Many thanks!

    Yes I too want to know if anyone else here resolved this issue as well.
    As OP mentioned, I'd like to preserve the project wihtout FCPX crashing , the grading can go to kingdomcome for all I care
    Regards

  • E4200 Guest Network issues

    Hey, I recently set up this router, and enabled the guest network, but it almost never takes me to the login page, and when it loads it takes an abnormally long time. Everything else works. Any suggestions? Thanks.

    Did this ever get resolved? We have the e4200 1.0.03 &  two wireless devices (one laptop & one desktop) and the cisco page pops up asking for the password = connected. BUT, the other device (desktop) connects to the e4200 but the cisco login page never pops up? BTW The wirekess icon indicates that there is a good connection & signal strength... but not able to access internet :^(
    BTWW Already done all the software up grades , turned the computer on and off, rebooted the router and all that. Oddly, this device had a wireless connection a few days ago & now the cisco window doesn't pop up asking for the password. What gives?
    Thanks, Ben

  • Siri just stopped working???

    "Siri" has been replaced on my phone by "voice control".  But I no longer can dictate emails or texts. Is this an automatic software "down-grade" from Apple?  It all happened after I turned the phone completely off and then restarted.   I reset the system, but to no avail.  Feeling bummed.  Voice to text was great advantage!

    Thanks so much! feel a bit foolish.  Didn't realize that there was a "setting" that could be shut off.  You made my day!

  • Help Lost Albums

    Help, I installed the new software up grade for Itunes and lost a small number of albums. I have tried a search but unable to find them. Any Ideas

    sorry - I thought I was clear
    In the future do not select the erase button in iPhoto - in stead select to keep the photos and wait until at ldease one sucessful backup cycle has completed then use hte camera's format command to erase and reformat the SD card
    for now
    1  --  Back up your iPhoto library,
    2  --  Depress and hold the option (alt) and command keys
    3  --  and launch iPhoto
    4  --- rebuild your iPhoto library database
    does different formatting with step numbers make it more clear?
    LN

  • Can I up grade my existing software on my I mac 9,1 to snow leopard & then to mountain lion software ?

    Can I up grade my existing software on my I mac 9,1 to snow leopard & then to mountain lion software ?

    Yes, you can do that according to specs yours is early 2009.
    http://www.apple.com/osx/specs/
    Note that 2 GB RAM is suggested as a minimum but 4 GB is more realistic for good performance.
    EDIT: Also, check for compatibility with any third party apps.
    http://roaringapps.com/apps:table

Maybe you are looking for