Software Update doesn't work after new SSD install

I just installed a new SSD into my five year old MacBookPro (CoreDuo). I am taking the opportunity to reinstall from the ground up, getting rid of a lot of the cruft I've gathered over the years. I installed 10.6 fresh from the DVD and then ran software update. I could update iTunes, Airport, etc, but couldn't run the 10.6.6 combo updater. I was told that the file was corrupted during download and wouldn't expand.
I downloaded the standalone combo updater from the website and that worked fine. However, when I went to install the drivers for my printers via the System Preferences function, I get the same error. Is there a setting or something that I missed?

In 10.6.8 Apple won't allow Mac's to connect to WEP Encrypted networks, and won't reconnect to "hidden" networks automatically.
Use a Ethernet cable until you can change the WIFI
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots

Similar Messages

  • Software update doesn't work after 10.6 upgrade

    After upgrading to 10.6, software update says "server won't respond". i.e.:
    Multiple locations. 20" intel iMac. OSX 10.6.8. I've tried each location and
    same results. How to configure SW Upd.?

    In 10.6.8 Apple won't allow Mac's to connect to WEP Encrypted networks, and won't reconnect to "hidden" networks automatically.
    Use a Ethernet cable until you can change the WIFI
    WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots

  • Software Update doesn't have any new software for your computer at this time

    HI
    I manged to get all my updates downlaoded and on my server, i have currently enabled 133 of 400 updates.
    I have changed my snow leopard machine to point to the internal update server
    But then after a while of checking this displays software Update doesn't have any new software for your computer at this time
    Which is a Lie, because i know there are updates on the server that the computer needs to have.
    Any Ideas
    Many Thanks

    Oh i forgot to say in consol (from the client) i get can't instantiate distribution from server address  error Domain=NSXMLParserErrorDomain code=70 etc
    Any ideas anyone?

  • HT3917 My apple wireless keyboard is not working after new batteries installed

    My apple wireless keyboard is not working after new batteries installed.

    Do you get a steady green light to say there is a connection.    If not, are the batteries the right way round.   Do you have a monitor to tell the batteries strength. Is there a reading.   Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

  • Fit the window with mouse doesn't work after new update 10.9.2

    Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

    Doesn't anyone having this issue?

  • Power button doesn't work after new update...and that's the least of it

    Ever since I updated my 4S with the new software my phone has had so many problems:
    Power button no longer works. I have to hold both the home button down and the power button to "reset" my phone to turn it off.
    I am having to do this CONSTANTLY b/c my phone freezes up ALL the time. When texting, using maps, other apps. Sometimes I can't get the freaking thing to even unlock. Texting is a disaster. Half the time they don't go through and when my phone freezes up for the millionth time that day and I reset, I later find out that my freaking texts didn't even go through. I HATE THE NEW SOFTWARE HELP!!

    If you are able to hold your home button and sleep/wake button down at the same time to reset the phone, you should be able to power it off just fine...

  • 27" display and late '09 MBP 13" - Display software update **doesn't work**

    Hello All,
    My shiny new 27" LED cinema display arrived today. The display is stunning, but when I downloaded and installed the "LED Cinema Display Software Update 1.0" (http://support.apple.com/kb/DL1107) on my mid-'09 MBP 13" it doesn't work!!
    The installation completes successfully, but after rebooting and checking system preferences, I don't get the brightness slider etc nor the option to use the built-in speakers in the display.
    Please advise if you have any advice or thoughts on the matter.
    Many thanks,
    Rob

    Apple got hold of me and we went through some trouble-shooting steps. Turns out that the USB connector, although fully plugged in, was somehow not seated correctly and was thus not recognizing the display and speaker etc.
    Happily resolved!

  • Software Update Doesn't Work - Now getting software error message

    The software update still doesn't work.  Now when I get the red triangle with the red exclamation point, when I start to remove the back of the phone I get an orange error message that takes up most of the screen.  At the end of the message it says that there is a problem with the ota__.zip package.  Then it gives me the option of rebooting.
    Does anyone know if/when this software problem will be fixed?
    I would definitely not recommend this phone to anyone.  Phone doesn't work, VZ and HTC can't fix the problem. 
    Thanks.

    It is not my problem!!  First of all, I don't ask for the download to start.  It starts on its own, several times a day.  Second, I use WiFi connection because 4G rarely works.
    Third, I did everything Verizon said to do - I went to a local VZ Wireless store where they did a factory reset.  Then they tried the download - it took 3 hours to download and then the update failed.
    Up until today the phone itself (not me) tried to download and apply the update several times per day.  Each time it fails.  The screen displays a black background with a red triangle with a red exclamation point through it.  Up until today I had to remove the back of the phone and then remove and replace the battery to unlock the phone.
    Today when I started to remove the back of the phone the orange error messages appeared as stated in my original post.
    Verizon also recommended talking to HTC which I did and they had no idea what the problem was.
    Verizon also told me that if the update still failed after the factory reset they would send me a new phone.  I said okay but they sent me a used phone instead (factory refurbished).  They said they should not have told me they would send me a new phone.  Then they said that when I return the phone if it gets lost then Verizon will bill me for the phone and I will have to get the money back from Fedex.  Outrageous!  Verizon didn't send me the phone they said they would and then said I would be billed for the cost of the phone if Fedex lost it.  I have never experienced such poor "customer service"  (or should I say customer unservice).
    I prefer Android and Microsoft Windows to anything Apple but I am seriously considering getting an iphone since this phone doesn't work and isn't supported.

  • Safari doesn't work after new Installation of Lion

    Hello,
    I installed a new SSD into my MBP mid 2009 and put the HDD into the optibay instead of the Superdrive, after that I installed OSX Lion onto the SSD and used the Migration Assisstent to migrate my old User Folder from the HDD with the newly installed OSX Lion. After the migration, everything went well, except of the following:
    -Safari doesn't work, no website can be loaded, as soon as I run Safari, there is a process running named "Webprocess" which uses 95% of the CPU and makes the MBP heating.
    -VLC Media Player does not work as well
    Any idea anyone?
    thx
    Mohammad

    Another problem is:
    When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
    (The Icon of the VLC Media Player  only jumps up and down in the dock, and nothing else happens)

  • IPod touch 5.1 Wi-Fi Software Update doesn't work

    Hi.
    My existing iPod touch (firmware 5.0.1) Wi-Fi connection to my router works fine.
    However I tried to update to firmware 5.1 now. No success. The Software Update starts showing 174 MB to go, but the progress bar doesn't fill. After #5 minutes, the iPod touch shows a failed upgrade message.
    When I connect this iPod touch to an iPhone 4 Personal Hotspot (which is connected via 3G to the Internet), the update starts!
    Are there any known issues doing a Software Update using router?
    I use a FRITZ!Bos 7390.
    Thanks,

    Try changing the DNS server on the iPod. See:
    iOS 5 update issues  "Network...: Apple Support Communities

  • Nokia Software Updater Doesn't Work.

    I try to use nokia software updater and it doesnt work. So I decided to re-install it and then try and still it doesn't work. All I get is an error message saying "critical software components are missing, please re-install" time after time.
    Why in the hell dont nokia just make the latest firmware available for download without having to use the **bleep** nokia updater software. I need some help guys.

    hi,
    Im having the same problem. Im have windows vista home premium 32 bit
    Anyone got any ideas?? Its really frustrating
    regards
    Dale

  • WSUS "Self-update is not working" after new certificate

    After creating a new self-signed certificate in SBS 2008 wizard we get the following error:
    Text: Self-update is not working
    Source: Windows Server Update Service
    Event id: 13042
    I know that it must be something simple. But I can not find the solution.
    Can anyone help me with this problem?
    Thanks

    Hi,
    Based on your description and this error message, this issue may be caused by:
    The Default Web Site is not running and/or has a site binding for SSL (HTTPS).
    The Selfupdate virtual directory has the "Require SSL" checked under the SSL settings.
    For more details, please refer to the following KB and check if can help you to solve this issue.
    WSUS 3.0 Self-update is not working on Windows Small Business
    Server and Event ID 13042 is generated
    If anything I misunderstand or any update, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Software Update doesn't work---- PLEASE HELP!!!

    Hello,
    My software update dosent work. It has worked in the past, but one day it just stopped working... it returnes with an error saying "Sorry, an unexpected error occurred. The Installer package has been moved to the Trash. To try again, open the package from the Finder."
    PLEASE HELP!!!
    --kknupp

    It sounds like you are fairly new to the upgrade process. Here's the basic gist of what makes updates succeed:
    http://www.macmaps.com/upgradefaq.html
    While many of the steps aren't always necessary they cause the least amount of trouble.

  • The 2.1.3 Software update won't work, the new version of iTunes won't download. Please help.

    For several months now I have not been able to find a solution to either of these two problems. When I have the Apple Software Update program open and I click update, it loads for a second and then goes back to the usual page saying to update. It will not update. I have also tried, multiple times, to install the new current version of iTunes and that won't work either. I've tried to repair iTunes by going to Control Panel > Programs > Repair and it still won't work. Please help because I'm trying to download a new app but it requires the new version of iTunes. I am using a Windows Vista and I'm this is for my 4th generation iPod touch.

    Did you try simply downloading the latest version of iTunes using the link below and then installing it on top of the older version?
    http://www.apple.com/itunes/download/
    B-rock

  • Phone Software update doesn't work with WiFi

    Can someone please help.
    I have an unlocked N97Mini. I'm trying to update the software version from 10.something to the currently available 12.something. For some reason my USB chord doesn't work (it only charges the phone, that's it) so I'm unable to use PC Suite. I tried to update the software wirelessly using WiFi but it won't let me do it, everytime I select on Phone Software under Application->SF Update it opens a pop up that says I have to use PC Suite. I uploaded other software through WiFi before such as OVI music, but it won't let me do it for the Phone Software.
    Please help. How can I update my Phone Software wirelessly?
    Thanks
    Andrei

    If you get the message that you need to use PC for updating the phone software, the software for your device variant may not yet be available for over-the-air update and you must do it via PC. You can check also if the same thing happens if you type *#0000# and select in this menu Options > Check for updates.
    If PC Suite is not working with your device, try installing the latest Ovi Suite version in your PC.

Maybe you are looking for

  • Secondary cost element report

    Hi experts, i just looking for secondary cost element reports ? regards, Sanju M S

  • How to get File created Date

    Hi.. I need to get the file deleted date. Based on that i ve to remove those files which dates are less than 2004dec31. i can use fobj.delete(), for deleting the file. But how can i get the file created date? Regards KC.

  • How do i print to acrobat distiller from illustrator

    i just installed acrobat so that i can print my illustrator, etc files to PDF instead of "Save as PDF" so that they will be small, email-able files. All installed fine, but when I go to the print menu in Illustrator there is no Acrobat Distiller opti

  • Translate java source file

    Dear Friends, Does anybody know how to translate java sources file and get all the info from it. Like i want to write a parser and want to extract its details and store in datastructures. Any similar examples present or any suggessions please inform.

  • Stereo to mono conversion

    Is adding the Logic "Gain" plug-in to the final step in the output channel strip, activating the "mono" button, and leaving the channel still set to stereo going to give me a true mono conversion of my tracks just in duplicate to the left and right o